DB-RD-C-001, 1/24 Drifting Beast RWD Drift Car Chassis Wheelbase 98-120mm adjustable The newly designed frame db (drifting beast) officially launched in 2022 The whole car adopts a hollow design without a chassis, and adopts the method of lateral support. Although metal materials are used in a large area, because of the large area of hollowing out, the effect of metal lightweight is achieved. The position of the front shock absorber has been changed to the inside of the front of the car, avoiding the interference caused by the maximum steering of the front wheel to the greatest extent. The rear adopts a straight bridge structure. When the center of gravity of the car is shifted, the contact angle between the rear wheel and the ground remains unchanged, and the same grip is always maintained. It can also be changed to a straight axle and a connecting rod. When the center of gravity is shifted, the contact surface between the rear wheel and the ground changes with the shift of the center of gravity. The basic version includes three sets of rear wheel cups, two corresponding to the straight axle mode and one corresponding to the semi-independent mode, so there is no need to buy them separately. The body and the rear gearbox adopt an integrated structure. The main part of the body is made of mirror stainless steel material, and a little polishing treatment will have a mirror effect. There are four types of steering gear arms, large and short, as standard, which basically cover all the mosquito steering gears on the market. 8. Two types of motor bases are equipped as standard, supporting brushed 130 motors and non-inductive brushless, inductive brushless and other motors. The frame does not need to install spacers, and the tightness of the swing arm can be adjusted by the tightness of the screws. The left and right positions of the motor can be fine-tuned, the motor is centered, bid farewell to the effect of the crooked motor, and cure players with obsessive-compulsive disorder. The rear straight axle wheel cup is adjustable, and the inner and outer eight can be adjusted at will. In the later stage, a telescopic dog bone will be introduced, and the rear wheel base can be adjusted without replacing the wheel hub. This product was added to our catalog on June 14, 2023

Read more less

RER16205, Redcat RDS Competition Spec 1/10 2WD Drift Car Builders Kit The Redcat RDS Competition Spec 1/10 2WD Drift Car Builders Kit offers a highly adjustable and high performance drift platform, whether your a veteran drifter or just starting. Using a competition inspired design the RDS platform provides a solid base with the ability to fine tune the driving characteristics to your liking. By using premium features such as a carbon fiber chassis, adjustable motor positions, multiple shock mounting locations and a plethora of suspension geometry adjustments it's easy to see how the RDS is a must have for the drift enthusiast. Designed with competition in mind by the seasoned drift drivers, the RDS has been developed to give you the edge you need at the track. Through rigorous testing Redcat was able to specifically cater the RDS platform to excel on prepped surfaces such as P-Tile and polished concrete as most drift tracks will use these surfaces. With that in mind the RDS design can easily adapt to less than ideal surfaces such as unpolished concrete or asphalt with it's incredible amount of chassis adjustments.  The RDS chassis is completely adjustable allowing the user to fine tune the chassis to best suit your driving style and surface. The motor plate can be mounted in three different positions, altering the car’s chassis roll and weight bias. This can adjust the amount of traction and chassis roll the RDS has on different surfaces. The RDS has multiple steering link positions and a sliding Ackermann plate, making it easy to fine tune the Ackermann. The RDS is loaded with tuning capabilities that will suit even the most advanced drivers. NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Competition spec drift car chassis Adjustable camber, caster, toe, Ackermann, roll center, wheelbase, and center of gravity Adjustable motor mount with high, mid and low positions Includes carbon fiber chassis, front and rear shock tower, and top deck Accepts 2S Shorty packs or 2S Stick packs HDPE drift tires with scale nut covers Specifications: Length: 445mm Wheelbase: 253mm - 261mm Adjustable Suspension: 4 Coil Over Shocks / Sliding Adjustable Ackermann Wheels: 6-Spoke Rims with Scale Wheel Nut Covers Tires: HDPE Drift Tires Includes: (1) Redcat RDS Competition Spec 1/10 2WD Drift Car Builders Kit Needed to Complete: Steering Servo 2 Channel Radio System 540 Size Motor ESC Drift Gyro Body (200mm wide, 253-261mm wheelbase) Battery (2S LiPo shorty pack recommended) Compatible Charger This product was added to our catalog on February 14, 2023

Read more less

Limited Edition Purple! MD 1.0 Master Drift 1/10 Drift Kit The Yokomo MD 1.0 Master Drift 1/10 2WD RWD Drift Car Kit features the latest drift technology. The team at Yokomo has taken years of drifting experience and incorporated an incredible amount of features into this highly competitive drift car. Using graphite suspension arms never used in drift cars before is the first hint that this machine is truly race inspired. Drift cars need adjustability and this MD 1.0 delivers. With a multitude of adjustments consisting of car width, skid angle, roll center camber, toe and more you will have no problem tuning your vehicle to the track conditions. Another feature that Yokomo focused on the transmission. Using a three gear transmission out of the box gives you a positive torque setup helping to plant the rear of the vehicle under power. As an option, Yokomo has given you the ability to convert to a more neutral four gear transmission setup again allowing you to tune for any track conditions. Packed with features and adjustments it is easy to see why they call this the "Master Drift". NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Limited Edition Purple! Limited specification with color anodized main aluminum parts RWD gear drive Front and rear aluminum shock towers Lightweight graphite Shorty battery holder 5mm Graphite suspension arms Differential height adjustment (3 levels) Adjustable motor position (13 levels) Aluminum rod end adapter Big bore aluminum low friction shocks Updated ultra-lightweight slide rack steering Graphite upper deck Graphite rear ESC mount to maximize traction Graphite flat body mount plate Aluminum rear bulkhead for both 3/4 gear transmissions 2.4mm rigid Lightweight graphite chassis Includes: (1) Limited Edition MD 1.0 Master Drift 1/10 RWD Drift Car Kit Needed to Complete: (1) 2-3 Channel radio system (1) Electronic Speed Control (1) 540 Motor (1) Steering Servo (1) 2S (7.4V) LiPo battery (1) Compatible Battery Charger (1) Drift tires & Wheels (1) 200mm TC or Drift body (1) Polycarbonate paint for body Tools for assembly This product was added to our catalog on July 13, 2023

Read more less

Yokomo SD 2.0 Super Drift 1/10 Electric RWD Drift Car Kit (Black, Purple or Red) The Yokomo SD 2.0 Super Drift 1/10 2WD RWD Drift Car Kit is welcomed into the drifting world with high expectations, with enough tuning capabilities to get lost in, this chassis is great for novice to adept level drivers. The SD 2.0 has been designed to dominate, whether you are leading or chasing this chassis will have you dragging bumper, flowing like water, and is sure to have you spinning brodies around the competition. The Yokomo SD 2.0 was designed to be one of the most customizable platforms out there the SD 2.0 lets you tune to your heart's desire. With a wide range of adjustability, this RWD platform offers the ability to make changes to suit changing track conditions or driver preferences. Using an updated two piece carbon main chassis the SD 2.0 includes two gearbox options, one three gear and one four gear. These two gearbox options change the direction of the motor allowing for different on-power throttle feel and traction. Additionally included are aluminum oil filled shocks, lightened slide rack steering setup with updated steering knuckles for an overwhelming cutting angle, aluminum shock towers, and updated high traction rear hubs giving the SD 2.0 premium high quality chassis components for precision driving feel and durability. If you are looking for a high quality, highly adjustable 2WD drift platform then look no further, the Yokomo SD 2.0 super drift RWD drift car is the kit for you! NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Updated steering blocks for overwhelming cutting angles Variable transmission with selectable 4 or 3 gears Differential height adjustments Rear bias servo mount Aluminum rear bulkhead Lightweight slide rack High traction rear hubs Split rear chassis Lightweight resin front bulkhead 30:70 weight distribution Specifications: Scale: 1/10 Length: 16.7in (425mm) Width: 7.7in (198mm) Wheelbase: 10in (256mm) Approximate Weight: 52.9oz (1500g) Drive: RWD Power Source: Electric  Gear Ratio: 1:2.6 Assembly Level: Kit Includes: (1) Yokomo SD 2.0 Super Drift 1/10 Electric RWD Drift Car Kit Needed to Complete: (1) 2-3 Channel radio system (1) Electronic Speed Control (1) 540 Motor (1) Steering Servo (1) Drift Gyro (1) 2S (7.4V) LiPo battery (1) Compatible Battery Charger (1) Drift tires & Wheels (1) 200mm TC or Drift body (1) Polycarbonate paint for body Tools for assembly This product was added to our catalog on July 17, 2023

Read more less