82010-4, Traxxas TRX-4 Sport 1/10 Scale Trail Rock Crawler Assembly Kit The Traxxas TRX-4 Sport 1/10 Scale Trail Rock Crawler Assembly Kit combines all the technical capability of a TRX-4, with the flexibility to build it your way, for your terrain and off-road mission. The kit includes everything you need to assemble a complete roller, but allows you to choose your preferred electronics. This is the perfect kit for enthusiasts who want to customize the vehicle with their own choice of electronics. It also includes over $70 of highly detailed scale accessories that are sure to win points. Traxxas makes assembly easy with a full-color assembly guide with step by step instructions.  Features: Unassembled kit Pre-cut clear TRX-4 Sport body Includes over $70 of scale accessories Full color step-by-step assembly manual Portal Axles Steel-gear single speed transmission Aluminum coilover GTS shocks 1.9” Canyon Trail S1 compound tires with trail-tuned foam inserts Rugged black 5-spoke wheels Includes: Expedition Rack with traction boards, shovel, axe, jack, fire extinguisher, and fuel cans (#8120X) LED-ready front grill with lenses (Light kit #8116, sold separately)  LED-ready rear tail gate with lenses (Light kit #8117, sold separately) Snorkel with side mirrors (#8119) Tires and Wheels Needed to Complete: Transmitter & Receiver 1/10 Crawler ESC & Motor High Torque Steering Servo 2S to 3S LiPo Battery (158.75 L x 47 W x 23/26mm H Max) & Charger AA size Batteries for Radio System Paint for Body   Tools for assembly    This product was added to our catalog on April 17, 2021

Read more less

82016-4, Traxxas TRX-4 1/10 Scale Trail Rock Crawler Assembly Kit w/TQi 2.4GHz Radio The Traxxas TRX-4 Scale and Trail Crawler chassis kit offers the same innovative features as the RTR vehicle, combined with the fun and excitement of building your own kit. Build your own portal axles, high/low range transmission, and remotely locking differentials. All the parts are organized neatly in labeled bags with waterproof electronics and pre-assembled shocks and suspension links. A fully illustrated color manual makes the kit as much fun to construct as it is to take off-road. Easy to Follow Assembly InstructionsThe TRX-4 Chassis Kit isn’t just for expert hobbyists. Traxxas goes the extra mile to make the full-color instruction book easy to follow and fun to use. Each section corresponds to a labeled bag with step-by-step assembly instructions. True-to-scale part illustrations and ruler charts make it easy to differentiate between different screws, bearings, and gears. Helpful assembly tips and clear illustrations take the frustration out of the assembly process. Have fun on the workbench and on the trail with the new TRX-4 Chassis Kit. Features: Easy to follow full-color assembly manual Trail-tuned XL-5 HV Waterproof Electronic Speed Control Powerful Titan™ 21T reverse rotation motor Portal Axles Rigid Steel Frame Full-time shaft driven 4-wheel drive Tough 6mm stub axles Steel front CV driveshafts Hardened steel rear axle shafts Remote locking steel gear differentials with cable-actuation Steel gear transfer case Innovative Battery Compartments Secondary battery mount over front axle for forward weight bias Two speed high/low range transmission with remote shifting Superior 45° steering angle Front — 3 link with panhard Rear — Triangulated 4 link Pre-assembled heavy-duty rod ends with steel hollow balls 5mm diameter steel link rods with 4mm threaded ends Coilover GTS shocks exclusive to TRX-4 chassis Silver-anodized aluminum bodies Threaded bodies with collars easily adjust ride height Silky smooth damping for the toughest trails O-ring cap seal and dual X-ring shaft seals Shock oil included in kit 1.9” Canyon Trail tires with trail-tuned foam inserts Tough black scale wheels Trail tuned S1 rubber compound 12mm steel hex Tire glue required TQi™ 2.4GHz 4-channel transmitter Patented O-Ring sealed watertight receiver box keeps the micro receiver dry Sealed Ball Bearings Hex hardware with rust-resistant black oxide coating Specifications: Length: 20.57 inches (523mm) Front Track: 9.78 inches (249mm) Rear Track: 9.78 inches (249mm) Ground Clearance: 3.14 inches (80mm) Weight: 6.42lb (2.91kg) Height: 10.47 inches (266mm) Wheelbase: 12.28 inches (312mm) Front Shock Length: 3.54 inches (90mm) Rear Shock Length: 3.54 inches (90mm) Approach Angle: 63.82° Departure Angle: 43.22° Breakover Angle: 58.93° Front Wheels: 1.9 x 1.02 inches (49 x 26mm) Rear Wheels: 1.9 x 1.02 inches (49 x 26mm) Front Tires: 4.64 x 1.89 inches (118 x 48mm) Rear Tires: 4.64 x 1.89 inches (118 x 48mm) Wheel Hex: 12mm Speed Control: XL-5™ HV Motor (electric): Titan® 21T Reverse Rotation Transmission: 2-speed Hi-Lo, Remote Shifting Gear Pitch: 32 Brake Type: Electronic “Hill Hold” Skill Level: 2 Battery Tray: 158.75 L x 47 W x 23/26mm H Includes: Unassembled TRX-4 Chassis Kit TQi™ 2.4GHz 4-channel radio system Steering Servo 3 Sub Micro Servos (2-speed & diff locks) XL-5 HV waterproof ESC Titan® 21T 550 motor Full-color step-by-step assembly manual Needed to Complete: TRX-4 compatible body (313mm wheelbase) (4) AA batteries for transmitter 6 or 7 cell NiMH or 2s or 3s LiPo battery pack with Traxxas High-Current Connector Battery charger Metric hex drivers (1.5mm, 2.0mm, 2.5mm) Basic hand tools (screwdrivers, needle nose pliers) CA glue Safety glasses This product was added to our catalog on May 27, 2022

Read more less

92056-4, Traxxas TRX-4 1/10 High Trail Edition RC Crawler w/'79 Chevrolet K10 Truck Body w/TQi 2.4GHz Radio The Traxxas TRX-4 1/10 Trail Crawler Truck with 1979 Chevrolet K10 Truck Body has been designed to offer scale performance and adventure. Thanks to its factory-installed Long Arm Lift Kit and oversize tires, the highly detailed K10 replica body stands over an inch taller than the standard TRX-4 chassis. The K10’s extended wheelbase further enhances the TRX-4’s legendary off-road capability for better performance on the trail. To further the appearance, this truck uses the Traxxas Clipless Body Mounting for added scale realism. The TRX-4 High Trail Edition is the perfect vehicle for the driver who wants it all: extreme all-terrain capability, stunning scale looks, and extreme durability. This High Trail Edition TRX-4 uses portal axles, 110mm threaded shocks and a lift kit for extreme ground clearance. Oversized Canyon Trail tires are mounted to chrome 2.2" wheels to improve both performance and ground clearance. When the going gets tough, use your transmitter to shift into low range for incredible 4-wheel drive pulling torque. Shift into high range for blasting down the trail. Traxxas gives you the versatility to lock and unlock the front and rear differentials to suit your driving needs directly from your transmitter. Leave the differentials unlocked for relaxed driving on the trail with smooth, tight turning and better handling at high speeds. When the trail gets technical, lock the front and rear differentials, or just the front, for superior grip over extreme terrain.  Features: Molded Scale Detail: The 1979 Chevrolet K10 Pickup Body comes with authentic-looking chrome wheels, side mirrors and windshield wipers. Clip-less Body Mounting System: Traditional posts and body clips are gone, and instead an integrated quick-release system secures the body invisibly. The hidden mechanism holds tight on the trail yet releases in just seconds to access the chassis. Trail-tuned XL-5 HV Waterproof Electronic Speed Control: HV electronic speed control brings 3s LiPo capability for strong efficient running. The powerful 21T Titan motor provides torque for hauling heavy loads and climbing steep grades. Factory-Installed Long Arm Lift Kit: The lift kit not only gives you an extra inch of ground clearance but also maintains the TRX-4's suspension geometry. Extended Wheelbase: The K10’s steel frame rails extend the wheelbase out to 336mm to capture the pickup’s real-world proportions perfectly. The Power of Portals: The K10’s portal axles work in tandem with the Lift Kit to lift the truck for huge center ground clearance. The portal axles’ internal gear reduction virtually eliminates torque twist, keeping the K10 straight and on course. Extended Aluminum GTS Shocks: These shocks are 20mm longer than the standard GTS shocks. The threaded shock bodies are silver-anodized to deliver silky-smooth dampening. Oversize Wheels and Tires: The aggressive Canyon Trail tires feature large lugs for increased grip with foam inserts for realistic trail performance. Chrome Mag wheels come with replica locking hubs to conceal the wheel nuts. Sealed Ball Bearings: Reliable sealed ball bearings are used throughout the chassis for long-lasting performance. Specifications: Scale: 1/10 Length: 22.20inches (563mm) Track Width (Front/Rear): 10.60inches (270mm) Center Ground Clearance: 4inches (99mm) Height (Overall): 10.89inches (277mm) Wheelbase: 13.23inches (336mm) Weight (w/o Battery): 7.38lbs (3.35kg) Shock Length (Front/Rear): 4.33inches (110mm) Wheels (Front/Rear): 2.2 x 1.34inches (56x34mm) Tires (Front/Rear): 5.3 x 2.14inches (135x54mm) Approach Angle: 70° Departure Angle: 52° Breakover Angle: 67° Hex Size: 12mm Gear Pitch: 32P Battery Tray Size (LxWxH): 158.75x47x23/26mm Includes (1) Traxxas TRX-4 with K10 Body (1) TQi 2.4 GHz 4-Channel Transmitter Maintenance Tools Needed to Complete: (4) "AA" Batteries (for transmitter) (1) NiMH Battery (4-7 cell) or LiPo Battery (2S/3S) (1) Compatible Battery Charger This product is expected to become available for purchase on Thursday, April 6, 2023

Read more less

AXI00006, Axial SCX24 2021 Ford Bronco Hard Body 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio The Axial SCX24 2021 Ford Bronco comes out of the box fully assembled and ready-to-run. The SCX24 '21 Bronco features an exceptionally detailed and extra-durable ABS hard body! This authentic scale body is available in three color options based on current Ford Bronco factory colors. Details include molded door handles, mirrors, roof rails, a mounted spare tire and an optional second decal sheet to allow a personalized finish. Serious scale modelers will find that this Ford Bronco not only looks great and performs well, but also brings next level realism to the SCX24 platform. Complementing the detail of the scale Ford Bronco body, Axial includes officially licensed Factory Ford Wildtrak wheels and Nitto Trail Grappler M/T tires. The SCX24 Bronco is built on the proven and easy to drive SCX24 chassis. The SCX24 makes it easy to find RC adventures. Go crawling on your desk. Turn a messy room into an obstacle course. Build an indoor "crawl course table" - or take your SCX24 outdoors and set up an exciting trail with a few holes, twigs, and rocks. Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite 88T 180-size motor and 2S LiPo battery, while a 3-channel Horizon Hobby 2.4GHz radio system is included for precise, dependable control. So everything you need to hit the trails is in the box!  Features: Factory-assembled and ready-to-run, with 3-channel radio, 180 brushed motor, servo, ESC/receiver unit and "AA" transmitter batteries included Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire Bonus second decal sheet for optional customization Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels Working lights in front, with molded lenses on all four corners of the body True full-time 4-wheel drive Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance Worm drive gears in front and rear differentials increase ground clearance Sturdy steel C-channel frame rails with bracing for added strength and proper alignment Durable steel axles provide strength and durability to match tough climbs and rough trails 2-Year limited warranty (see product manual for details) Specifications: Height: 4.625" (117 mm) Front Track: 3.938 in (100.0mm) Width: 3.875" (98 mm) Rear Track: 3.938 in (100.0mm) Wheelbase: 5.19" (132 mm) Length: 8.75" (222 mm) Includes: (1) Axial® SCX24™ Ford Bronco 1/24 Scale 4WD RTR (1) Horizon Hobby® 2.4GHz 3-Channel Radio System (1) Axial® AS-1 Micro Servo (1) Horizon Hobby® ESC/Receiver Combo (1) Dynamite® USB LiPo Charger (1) Dynamite® 88T 180-Size Brushed Electric Motor With Pinion (1) Dynamite® 350mAh 2S 30C 7.4V LiPo Battery (4) AA Batteries for Transmitter (2) Decal Sheets (1) Product Manual Needed to Complete: Everything you need to drive is included This product was added to our catalog on April 22, 2022

Read more less

AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio The Axial SCX24 Deadbolt RTR 1/24 Scale Mini Crawler is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's ideal for indoor fun, but performs so well, its equally suited to outdoor adventures as well. Even new drivers will be well-equipped to tackle tough climbs and rough trails. Like it's SCX10 big brother, the SCX24 uses plenty of steel components - from the C-channel frame rails to the front and rear axles and dogbones. Offering ready to run simplicity, scale looks, and confident handling on any trail, the SCX24 has the strength to keep pushing onward and upward. The SCX24 chassis features a three-link front and four-link rear suspension for realistic handling. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. Plus, worm gear axles provide high ground clearance with a low gear ratio that helps to reduce torque twist. Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. The shrunk down Deadbolt body provides the classic stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar that makes the 1/10 Deadbolt a performer - and the realism continues right down to the licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires. Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter! Features: Includes radio system, ESC and transmitter batteries Includes motor and on-board LiPo battery Realistic narrow-stance rock crawler body in olive green or red Molded roll cage with realistic light bar Realistic driver figure and many other scale details Officially licensed KMC XD229 Machete Crawl wheels Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread) Full-time 4WD Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels Steel front and rear axles, front stub axles and dogbones provide strength and durability Rugged steel C-channel frame rails with bracing keep everything rigid and aligned Front and rear axles consist of a two-piece, molded plastic solid axle design 3-Link front and 4-link rear suspension supply optimal handling Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist Two LEDs in the front bumper for night driving Specifications: Approximate Assembly Time: No assembly required Batteries: 7.4V 350mAh 30C LiPo Body: Painted and trimmed Axial Deadbolt Charger: USB LiPo charger Chassis: Stamped steel rails Completion Level: Ready-To-Run Differential: Worm gear 16T/4T Drivetrain: 4WD Gear Pitch: 32-Pitch Ground Clearance: 1.06" (27mm) Height: 4.73" (120.2mm) Length: 7.8" (199.5mm) Motor Size: 180 Motor Type: Brushed Pinion: 10T Radio: AX-4 2.4GHz 2-channel Servos: AS-1 steering servo Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm) Size/Scale: 1/24 Speed Control: AE-6 ESC receiver/combo Spur Gear: 55T Suspension: Solid axle, front and rear Tire Diameter: 2.0" (51mm) Tire Tread: Nitto Trail Grappler M/T, large block tread Track: 3.9" 99.5mm) Vehicle Type: Crawler Water-Resistant: No Weight: 0.5lb (0.22kg) Wheel Diameter: 1.0" (26mm) Wheel Type: Black Plastic Licensed KMC XD229 Machete Crawl Wheel Width: 0.48" (12.4mm) Wheelbase: 5.25" (133.5mm) Width: 3.9" (99.5mm)   Includes:  (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck (1) Axial AE-6 ESC/receiver combo (installed) (1) Dynamite® 88T brushed electric motor (installed) (1) Axial AS-1 steering servo (installed) (1) Axial® AX-4 2.4GHz 2-channel radio (4) AA transmitter batteries (1) 350mAh 2S 7.4V LiPo battery (1) USB LiPo charger (1) Product Manual Needed to Complete: Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included! This product was added to our catalog on May 29, 2019

Read more less

HWI30120402, HWA30120402, Hobbywing QuicRun Fusion Pro FOC 2-in-1 ESC & Motor System (2300Kv) The Hobbywing QuicRun Fusion FOC 2300Kv 2-in-1 ESC & Motor System is a unique ground-up design, packed with technology specific for scale trucks and rock crawlers. Features: Integrated design of Hobbywing's patent technology: The integrated design of the ESC makes the size similar to a 540 motor, and the overall weight is only 209g. This makes the layout and wiring of the car simpler, while creating a cleaner overall chassis that also leaves more room for an interior.  Intelligent Torque Output & Speed Closed-loop Control for Easy Control: The Fusion system combined with Intelligent Torque output and closed-loop speed control means the power system will maintain the motor’s Torque level and RPM as the vehicle conditions change. Uphill, downhill, under load, the intelligent output torque makes the operation more consistent. Note: If the “RPM/Throttle Matching” is set to “Disabled”, no intelligent torque output & speed closed-loop control, just like the brushed system. FOC (Field-oriented Control) for Super Linearity & HighTorque & Extreme Mute: The Fusion system adopts FOC driving mode so low speed torque is strong, and it runs smoothly at very low speed. Moreover, the motor is extremely silent when it is running. The driving noise which annoys the driver disappears. It is the best choice for a scale rock crawler. Waterproof: Applicable to All Weather & Track Conditions: The IP-67 waterproof system has excellent waterproof and dustproof performance. You can easily drive in the mud, sand, ice, snow and water. High Driving Efficiency for Long Battery Life: FOC offers high efficiency and reduced heat, dramatically extending runtime. Benefitting from a sine wave driving mode, the motor runs silently and softly. Professional Drag Brake Adjustments & Super Parking Capacity: 8 levels of drag brake force and 9 settings of drag brake rate allow a high level of tuning for different conditions and driver preference. The maximum drag brake force is about twice that of an ordinary brushless system of the same size, providing super strong parking capacity on a steep slope. Advanced and Secure Electronic Switch: Compared to standard on/off switches, the dust, dirt, and waterproof electronic switch housing ensures a long reliable life for your power system, and will not suffer from the problems that will damage a mechanical switch.  Specifications: Motor Kv: 2300Kv Continuous Current: 60A Shaft Diameter: 3.175mm Peak Current: 200A Input Voltage: 2-3S LiPo/6-9 Cell NiMH BEC Output: 6V/7.4V adjustable, 4A continuous (switch mode) Input Wires: 14awg, 330mm long Input Connectors: XT60 (factory installed) Port Programming: Independent programing interface (switch position) Size: 37x58mm Weight: 209g w/wires Includes: (1) FOC motor w/ built-in ESC & Factory installed XT60 plug This product was added to our catalog on June 1, 2022

Read more less