ARA390289, Arrma 4x4 BLX Motor Fan Set
This Arrma 4X4 BLX Motor Fan Set is designed to keep motor temperatures down and performance up! This fan set is compatible with Arrma 4x4 BLX BigRock, Granite, Kraton, Outcast, Senton and Typhon kits.
Features:
Tough composite materials for long-lasting durability and premium performance in all conditions.
Easy to fit for fast and efficient servicing.
Designed to attach directly to motor heat-sink.
Fan cover to protect fan from small stones.
Extender wire enables connection from receiver in front to motor at rear of vehicle.
Attachment screws included.
This product was added to our catalog on May 31, 2021
ARA390290, Arrma BLX 4x4 25mm ESC Fan
This is an Arrma BLX 4x4 25mm ESC Fan, intended for use with Arrma BLX 4x4 BigRock, Granite, Kraton, Outcast, Senton and Typhon kits. This package contains one 25mm ESC Fan as a direct replacement for the fan of your BLX ESC and hardware.
Features:
Tough composite material for long-lasting durability and premium performance in all conditions
Easy to fit for fast and efficient vehicle servicing
This product was added to our catalog on August 22, 2023
CSE011-0014-00, Castle Creations 36mm "CC Blower" Fan Shroud
Castle Creations 36mm "CC Blower" Fan Shroud. Pushing your 10th scale to the max? Just the type who likes the motor as cool as possible? No matter which category you fall under, Castle has the solution! The CC Blower for 36mm motors plugs directly into your receiver for power, and can drop motor temperatures as much as 30 degrees!* A must have for any hardcore basher or temperature freak. Includes, fan, shroud, and two (2) black zip ties. Fits all CM36 and 1400 series motors. Get yours today!Usage: Designed to fit most 540/550 motors.
This product was added to our catalog on December 16, 2021
CSE011-0153-00, Castle Creations 2028 Series 40mm Motor Cooling Fan
The Castle Creations 2028 Series 40mm Motor Cooling Fan provides ample cooling for the most demanding of situations. With the ability to plug into a traditional receiver port this dual fan setup is an easy addition to aid in cooling for Castle 2028 (or 56mm diameter) motors. Simply slide the mount over your motor and secure it with two zip ties and you are ready to go! NOTE:
Taller optional 40mm fans can be attached with longer mounting screws.
This product is for supplemental cooling purposes only, and should not be used to push the motor beyond its recommended limits or cover up heating issues caused by your setup. If you have any question on how to lower your motor temperature please contact Castle Creations tech support. Temperature drop will vary depending on setup.
Specifications: Maximum Input Voltage: 8.4vMaximum RPM: 10,000Fan Size: 40mmx40mmx7mmWaterproof: No, remove before exposing fans to moisture.Includes:
(2) 40mm Fans Installed in Plastic Shroud
(2) Black Zip Ties
This product was added to our catalog on September 12, 2022
CSE011-0162-00, Castle Creations 1700 Series 40mm Motor Cooling Fan
The Castle Creations 1700 Series 40mm Motor Cooling Fan provides ample cooling for the most demanding of situations. With the ability to plug into a traditional receiver port this dual fan setup is an easy addition to aid in cooling for Castle 1700 (or 46mm diameter) motors. Simply slide the mount over your motor and secure it with two zip ties and you are ready to go!
Specifications:
Maximum Input Voltage: 8.4v
Maximum RPM: 10,000
Fan Size: 40mmx40mmx7mm
Waterproof: No, remove before exposing fans to moisture.
Includes:
(1) 40mm Fan Installed in Plastic Shroud
(2) Black Zip Ties
This product was added to our catalog on April 18, 2024
HRAMH550TE06, Hot Racing Clip-On Two-Piece Motor Heat Sink w/Fan (Blue)
Hot Racing Clip-On Two-Piece Motor Heat Sink is compatible with 540 and 550 size motors. Versatile two-piece heat sink clip provides 8 different width adjustments.
Features:
Keeps the motor running cooler
Aluminum construction
Clip on heat sink attaches to 540 and 550 size motors with a 36mm can diameter
Two-piece heat sink clip provides 8 different width adjustment options (20-40mm). M3 screws and nuts will be required for some configurations.
Blue anodized
Laser etched Hot Racing insignia
Specifications:
Overall height: 39mm (1.54 inch)
Fan size: 30x30x7.5mm
Fan mounting hole pattern: 24mm square
Input voltage: DC 7.2-8.4V MAX
This product was added to our catalog on April 3, 2021
MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T)
OVERVIEW
The Motiv 30x30 High Voltage Carbon Edition Super Fan features dual ball bearings and is rated to handle 8.4 volts, but will still push good air flow running off of the lower Rx voltage. Included is a MOTIV carbon fan guard to save that precious pinky from imminent annihilation.
This product was added to our catalog on August 10, 2021
MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T)
OVERVIEW
The Motiv 30x30 High Voltage Carbon Edition Super Fan features dual ball bearings and is rated to handle 8.4 volts, but will still push good air flow running off of the lower Rx voltage. Included is a MOTIV carbon fan guard to save that precious pinky from imminent annihilation.
This product was added to our catalog on August 10, 2021
PTK-2111, ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
The ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage specs. Plus the aluminum frame work adds strength to the assembly, helping protect the fan blades in the event of a crash. The fan is a true 2S HV component, that has been built to last with dual ball bearings, and pre-wired 30mm long 2 pin JST connector. Plus, we include a 200mm long adapter plug that allows you to connect the fan directly to the receiver or another source of power. The fan can be mounted directly to the chassis with double side tape, or by using an optional fan mount (not included).NOTE: This fan should be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnet interference. Features:
30mm aluminum cooling fan
Ideal for ESC and motor applications
Aluminum casing helps protect the fan blades
Compatible with 2S HV LiPo systems (8.75V max)
Anodized black with silver chamferred edges
Perfect for 1/12, 1/10 and 1/8 scale platforms
2 pin JST connector and included extension for easy installation
Product Model High Speed HV Cooling Fan
Application 1/12 - 1/8 Motor & ESC
Fan Speed 28,000 RPM
Dimensions (LxWxH) 31x31x10.5mm
Mounting Pattern
24x24mm
Material
Aluminum Case w/Plastic Fan
Weight
12.5g
Operation Voltage
5V - 8.75V
Connector 2 Pin JST
Current 0.45A
This product was added to our catalog on December 16, 2021
PTK-2112, ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Blue/Black)
The ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan is a great option to keep your ESC and motor temps in check. The fan features a machined aluminum case that helps to dissipate heat, allowing cooler operation of the fan motor at high voltage specs. Plus the aluminum frame work adds strength to the assembly, helping protect the fan blades in the event of a crash.
The fan is a true 2S HV component, that has been built to last with dual ball bearings, and pre-wired 30mm long 2 pin JST connector. Plus, we include a 200mm long adapter plug that allows you to connect the fan directly to the receiver or another source of power. The fan can be mounted directly to the chassis with double side tape, or by using an optional fan mount (not included).
NOTE: This fan should be installed at least 5mm away from the motor to allow sufficient air flow and prevent magnet interference.
Features:
30mm aluminum cooling fan
Ideal for ESC and motor applications
Aluminum casing helps protect the fan blades
Compatible with 2S HV LiPo systems (8.75V max)
Anodized black with blue chamfered edges
Perfect for 1/12, 1/10 and 1/8 scale platforms
2 pin JST connector and included extension for easy installation
Product Model
High Speed HV Cooling Fan
Application
1/12 - 1/8 Motor & ESC
Fan Speed
28,000 RPM
Dimensions (LxWxH)
31x31x10.5mm
Mounting Pattern
24x24mm
Material
Aluminum Case w/Plastic Fan
Weight
12.5g
Operation Voltage
5V - 8.75V
Connector
2 Pin JST
Current
0.45A
This product was added to our catalog on December 16, 2021
TRA3340, Traxxas Velineon ESC Cooling Fan
The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.
This product was added to our catalog on September 7, 2021
TRA3456, Traxxas Hoss Cooling Fan Kit w/Shroud (fits #TRA351R and #TRA3461 motors) (requires #TRA3458 heat sink to mount)
This product was added to our catalog on May 7, 2021
TRA3474, Traxxas Velineon 1200XL Dual Cooling Fan Kit
Traxxas Velineon 1200XL Dual Cooling Fan Kit.
This product was added to our catalog on September 7, 2021
TRA3474X, Traxxas Low Profile Dual Cooling Fan Shroud
Traxxas Low Profile Dual Cooling Fan Shroud. This is a replacement used on vehicles such as the Traxxas XRT race truck that utilize the Velineon 1200XL brushless motor. Package includes two low profile cooling fans with shrouds and mounting hardware.
This product was added to our catalog on May 19, 2023
TRA3475, Traxxas Velineon VXL-8S Cooling Fan
Fits:
Traxxas Maxx
Traxxas Sledge
Traxxas X-Maxx
Traxxas XRT
This product was added to our catalog on May 7, 2021
WRP-HC-RED, Whitz Racing Products 30mm HyperCool Aluminum Cooling Fan (Red)
The Whitz Racing Products Silver 30mm HyperCool Aluminum Cooling Fan helps lower a motor's operating temperature. A cooler running temp improves the motor's power output, keeping speeds consistent on longer runs as well as extending the life of your motor. Included is a 200mm extension wire to run the length of your vehicle to connect the fan to your receiver no matter where the fan is positioned.
Secure the cooling fan with your favorite double-sided tape (servo tape), fan motor mount or any existing recommend options available for your intended vehicle.
Specifications:
Input Voltage: 6.5
RPM @8.5V: 28,000
Dimensions: 30x30x10mm
Weight: 19g
Color: Red
This item was added to our catalog on January 20, 2023
YEA-YA-0180, Yeah Racing 30x30x10mm Tornado High Speed Fan (Black)
This is the Yeah Racing 30x30x10mm Tornado High Speed Cooling Fan in Black color. This fan features dual ball bearings and is great for motors, ESC's and multiple other applications. This fan is capable of use with a 2S LiPo (8.4V), but no higher.
Specifications:
Dimensions: 30x30x10mm
Bearing: Dual Ball Bearing
Operating: Voltage 5V
Start-up Voltage: 3V
Power: 1.40W
Fan Speed: approx. 14,000 RPM
Max Air Flow: 5.501 CFM
Current: 0.28A
Weight: 9.0g
Connector: JST
Note: For the best performance, Yeah Racing recommends you continuously run this fan for 2 - 3 hours to break it in.
This product was added to our catalog on December 16, 2021
Yeah Racing 540/550 Aluminum Heat Sink w/30mm High Speed Tornado Fan (Blue or Red)
Yeah Racing 540/550 Aluminum Heat Sink w/30mm High Speed Tornado Fan. This optional heat sink and fan set is perfect for any standard 540 or 550 sized motor. The fan features the use of a JST connector allowing you to connect to an open auxiliary port. Package includes one motor heat sink, one cooling fan and hardware.Features:
Perfect fit on any standard 540 or 550 size motor
Made from aluminum for optimum heat transfer
Anodized for a clean finish
This product was added to our catalog on December 16, 2021
