ARA320514, Arrma Infraction/Limitless Chassis Plate (Black)
This is a replacement Arrma Chassis Plate, intended for use with the Arrma Infraction and Limitless kits.
Features:
High quality aluminum for reduced vehicle weight and increased durability.
Precision manufactured hardware mounting holes for fast and easy servicing.
Anodized black for cool looks and increased durability.
Integrated droop setting plates for advanced tuning options in minutes.
Designed to provide the perfect balance of strength and consistent handling characteristics for your vehicle.
Includes:
(1) Black Aluminum Chassis
This product was added to our catalog on July 2, 2021
DB-RD-C-001, 1/24 Drifting Beast RWD Drift Car Chassis
Wheelbase 98-120mm adjustable
The newly designed frame db (drifting beast) officially launched in 2022
The whole car adopts a hollow design without a chassis, and adopts the method of lateral support.
Although metal materials are used in a large area, because of the large area of hollowing out, the effect of metal lightweight is achieved.
The position of the front shock absorber has been changed to the inside of the front of the car, avoiding the interference caused by the maximum steering of the front wheel to the greatest extent.
The rear adopts a straight bridge structure. When the center of gravity of the car is shifted, the contact angle between the rear wheel and the ground remains unchanged, and the same grip is always maintained. It can also be changed to a straight axle and a connecting rod. When the center of gravity is shifted, the contact surface between the rear wheel and the ground changes with the shift of the center of gravity.
The basic version includes three sets of rear wheel cups, two corresponding to the straight axle mode and one corresponding to the semi-independent mode, so there is no need to buy them separately.
The body and the rear gearbox adopt an integrated structure.
The main part of the body is made of mirror stainless steel material, and a little polishing treatment will have a mirror effect.
There are four types of steering gear arms, large and short, as standard, which basically cover all the mosquito steering gears on the market.
8. Two types of motor bases are equipped as standard, supporting brushed 130 motors and non-inductive brushless, inductive brushless and other motors.
The frame does not need to install spacers, and the tightness of the swing arm can be adjusted by the tightness of the screws.
The left and right positions of the motor can be fine-tuned, the motor is centered, bid farewell to the effect of the crooked motor, and cure players with obsessive-compulsive disorder.
The rear straight axle wheel cup is adjustable, and the inner and outer eight can be adjusted at will. In the later stage, a telescopic dog bone will be introduced, and the rear wheel base can be adjusted without replacing the wheel hub.
This product was added to our catalog on June 14, 2023
KYO32891, Kyosho MR-04 EVO2 Mini-Z N-MM2 Brushless Chassis Set (5600kV)
Performance Mini-Z Chassis Roller & Brushless Motor
The MR-04EVO2 Mini-Z N-MM2 Brushless Chassis Set (5600kV) represents a significant leap forward in the top-tier MINI-Z series, offering a full model upgrade that pushes the boundaries of performance. Retaining the excellent MR-03 layout while introducing key enhancements, the MR-04EVO2 chassis achieves unparalleled performance improvements. The lower center of gravity (CG) resulting from the lower mounting of AAA batteries enhances stability through corners and elevates both speed and control. This thoughtful chassis design, coupled with the Sensored brushless motor, provides a total balance that takes performance to a higher level, making it a formidable competitor in the high-performance competition mini R/C car category.
Quality is evident in the meticulous design and engineering of the MR-04EVO2 chassis. The front suspension improvements, including an updated kingpin-integrated knuckle for enhanced camber stability, showcase a commitment to optimizing every detail. The geometric revisions of the caster and trail contribute to more linear maneuverability, allowing drivers precise control over their vehicles. The inclusion of a ball differential as standard further refines the driving experience, optimizing rotational differences between left and right rear wheels during turns and providing moderate slip action for improved traction. The silver clear anodized finish on aluminum parts not only contributes to durability but also adds a stylish touch that matches the chassis's exceptional performance.
What makes the MR-04EVO2 truly special is its adaptability and customization options. The chassis supports both narrow and wide tread settings, allowing enthusiasts to tailor their setup according to body type. Adjustable wheelbase adds another layer of customization, providing flexibility in chassis settings. The included brushless motor, Kyosho Speed House XSpeed 56 (5600kV) ensures the delivery of powerful, smooth and efficient performance! Taking the MR-04EVO2 to another level of dominance in the world of high-performance mini competition R/C cars, solidifying its position as one of the best of the best!
NOTE: This is an assembled chassis that still requires additional items to run. See needed to complete list below for a list of items required to complete the model.
Features:
Powerful Kyosho Speed House XSpeed 56 (5600kV) brushless motor
Lower CG design with lower battery mounting positions
Significant performance improvements
Updated kingpin-integrated knuckle to further improve camber stability
Adjustable wheelbase and tread settings
Adjustable wheelbase
Ball differential included as standard
Ball bearings have been changed to 3mm internal diameter for lower rotational resistance
Geometric revision of caster and trail
Improved linear maneuverability
Specifications:
Scale: 1/27
Length: 124.5mm
Width: 72-76mm
Height: 31mm
Wheelbase: 98.0mm (LL)
Weight: 135.5g
Front Tread: 58.5 / 65.0mm
Rear Tread: 61.5 / 65.0mm
Gear Ratio: 7.3 / 6.3 / 5.5 / 4.9 1
Motor: XSpeed 56 (5600kV)
Includes:
(1) MR-04EVO2 Mini-Z N-MM2 Brushless Chassis Set w/(5600kV) Motor
(1) Electronic speed controller (ESC)
6T / 7T / 8T / 9T Pinion gears
Pinion gear tool
Wheel wrench
Spare wheel nuts
Needed to Complete:
(1) 2-Channel Transmitter/Receiver system
(4) AAA Batteries for Chassis
(1) Body
(4) Tires
(4) Wheels
This product was added to our catalog November 22, 2024
LOS01026T1, Losi 1/18 Mini LMT 4X4 Brushed Monster Truck RTR, Grave Digger
The 4WD Mini LMT brings monster truck excitement to RC in a low cost, race anywhere size that fits in a backpack. Scaled down from standard size LMT platform, it delivers great performance out of the box to bring Monster Jam dreams to life!Fully ready-to-runOfficially licensed bodiesSolid axle 4-wheel driveFunctional LED headlightsRealistic BKT tires
This product was added to our catalog on April 5, 2024
LOS01026T2, 1/18 Mini LMT 4X4 Brushed Monster Truck RTR, Son-Uva Digger
The 4WD Mini LMT brings monster truck excitement to RC in a low cost, race anywhere size that fits in a backpack. Scaled down from standard size LMT platform, it delivers great performance out of the box to bring Monster Jam dreams to life!
Fully ready-to-run
Officially licensed bodies
Solid axle 4-wheel drive
Functional LED headlights
Realistic BKT tires
This product was added to our catalog on April 5, 2024
LOS211020, Losi Mini-B Chassis & Mud Guards
This is a replacement Losi Mini-B Chassis & Mud Guard set, intended for use with the Losi Mini-B Buggy.
This product was added to our catalog on February 9, 2023
LOS250018, Losi Desert Buggy XL-E 1/5 Body Set (Clear)
This is a replacement Losi Desert Buggy XL-E 1/5 Body Set. This set includes multiple clear lexan body pieces, as well as two plastic heads and hardware. These Lexan panels require polycarbonate paint.
This product was added to our catalog on February 9, 2023
TRA7421, Traxxas Slash 4X4 Low CG Chassis Conversion Kit4
Features:
Complete kit, no additional parts required
Lowers chassis one inch
Over 50% lower battery position
Low center of gravity enhances handling and increases cornering speed
Integrated transponder mount
Genuine Traxxas quality and precision
7421 Low-CG chassis conversion kit for Slash 4X4 includes:
Chassis
Nerf bars (2)
Front bulkhead
Rear bulkhead
Motor mount
Motor plate
Battery hold-down
Front and rear hold-down retainers
Servo horn
Steering linkage
Waterproof receiver box with o-ring seal
Gear cover
Wire retainer
Complete installation hardware set
This product was added to our catalog on September 7, 2021
TRA8622, Traxxas E-Revo VXL 2.0 Chassis
This is a replacement Traxxas E-Revo VXL 2.0 Chassis. This chassis requires the TRA8629 and TRA8630 bulkheads.
This product was added to our catalog on September 7, 2021
TRA9522, Traxxas Sledge Aluminum Chassis
Traxxas Sledge Aluminum Chassis. This is a replacement chassis for the Traxxas Sledge. Package includes one aluminum chassis.
This product was added to our catalog or updated on April 4, 2022
