Kyosho Fazer Mk2 FZ02 VE 69 Camaro Z/28 RS Supercharged ReadySet (Tuxedo Black) w/Syncro KT-231P+
The Kyosho Fazer Mk2 FZ02 VE 1969 Camaro Z/28 RS Supercharged ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source.
Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving.
Features:
“Ultra Scale Body” replicates the fine details of the actual body of the car.
Shaft drive full-time 4WD touring chassis (FZ02)
Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis
Equipped with 2-bevel grease-filled gear diffs on front and rear
Large size dog bones and cup joints realize superior reliability and durability
Belt mounting battery compartment allows various battery types to be used
Full ball bearings that reduce drive loss equipped throughout the drive system
Features KS202W waterproof steering servo
Includes completely finished body with color scheme and decals applied
Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces
Performance can be further enhanced by installing various optional parts
Specifications:
Length: 461mm
Width: 210mm
Height: 138mm
Wheelbase: 260mm
Tread (F/R): F:167mm/R:167mm
Tires (F/R): F:64×27.7mm/R:64×27.7mm
Gear Ratio: 6.54:1
Weight: 1650g (approx.)
R/C system: Syncro KT-231P+
Motor: TORX10E
Includes:
Completed chassis with R/C radio installed
Factory assembled body complete with color scheme
Syncro KT-231P+ transmitter
Hexagonal wrench
Spanner
Needed to Complete:
(4) AA batteries for transmitter
7.2-7.4V Battery for chassis
Charger for battery
Tools
This product was added to our catalog on November 30, 2022
KYO34494T1, Fazer Mk2 VE 1970 Chevelle Supercharged Dark Blue
This V8 powered American muscle car from the 1970s is recreated by using Kyosho's original supercharger and mufflers on both sides. The elegant body lines, rugged engine head and sparkling muffler create a perfect match.
The motor has been upgraded to the powerful TORX10E brushless motor, increasing the maximum speed to approximately 65km/h (40mp/h). The speed controller has also been upgraded with the new BRAINZ 10 V2. To handle the increased power of the motor, the pinion gear has been sintered (hardened) and the aluminum HD center shaft is factory installed.
Includes:
RTR - Factory-assembled chassis with R/C unit installed
Painted/Decaled/Assembled body
Synchro KT-231P+ transmitter
Optional Light Buckets (Requires installation, led set sold separately)
Hex wrench
Spanner
Required to Complete:
4 AA batteries for transmitter
Compatible Ni-MH (6-9s) or LiPo (2-3s) battery
Charger for chosen battery
Features:
Body has supercharger and mufflers preinstalled
Sintered (hardened) pinion gear
Aluminum Center Shaft
LCG Chassis w/ integrated gearbox
Sealed Motor Case
TORX10E/BRAINZ 10 V2 Motor/ESC Combo
Supercharger can be manually opened and closed
Specifications:
4WD - Shaft Driven
Water-Resistant Electronics
This item was added to our catalog on April 5, 2024
MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T)
OVERVIEW
The Motiv 30x30 High Voltage Carbon Edition Super Fan features dual ball bearings and is rated to handle 8.4 volts, but will still push good air flow running off of the lower Rx voltage. Included is a MOTIV carbon fan guard to save that precious pinky from imminent annihilation.
This product was added to our catalog on August 10, 2021
MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T)
OVERVIEW
The Motiv LAUNCH 2.0 Turn PRO Drag Racing Modified Brushless Motor is a 3 phase, 2 pole motor developed specifically for drag racing. Every MOTIV Motor is hand checked, assembled and packaged by a professional in house at their WI, USA office. During this process, every motor component must meet MOTIV requirements before assembly and packaging. Included is a specification check list which is filled out on a motor to motor basis all through the testing and assembly process to ensure the quality of the finished product.
Features:
Stator:
Specially selected stator material for low power loss
High quality pure copper wire
Emphasis on hand winding for consistency
Solder Tabs:
Gold plated pure copper tabs for low resistance
Internal "Drop Connection" design to ensure low resistance and consistent internal solder joints
Rotor:
Sintered rotor
High quality neodymium magnet material for lasting magnetism
Can Assembly:
High flow vent holes to allow air flow in and out for lower operating temps
Machined all aluminum anodized can, front plate and end bell
Infinitely adjustable timing
Dual precision ball bearings
Overall:
Every motor tested in house during the assembly and packaging process
Spec/test sheet provided uniquely for every motor to ensure quality
Designed to comply with ROAR specifications
Lightweight completed design
Packaged in reusable cushioned storage container
This product was added to our catalog on August 10, 2021
MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T)
OVERVIEW
The Motiv 30x30 High Voltage Carbon Edition Super Fan features dual ball bearings and is rated to handle 8.4 volts, but will still push good air flow running off of the lower Rx voltage. Included is a MOTIV carbon fan guard to save that precious pinky from imminent annihilation.
This product was added to our catalog on August 10, 2021
MOV20920P, Motiv LAUNCH PRO Drag Racing Modified Brushless Motor (2.0T)
OVERVIEW
This is the Motiv M-CODE "MC4" Pro Tuned 13.5 Turn Spec Brushless Motor. Every MOTIV Motor is hand checked, assembled and packaged by a professional in house at their WI, USA office. During this process, every motor component must meet MOTIV requirements before assembly and packaging. Included is a specification check list which is filled out on a motor to motor basis all through the testing and assembly process to ensure the quality of the finished product.
Features:
Stator:
Specially selected stator material for low power loss
High quality pure copper wire
Emphasis on hand winding for consistency
Solder Tabs:
Gold plated pure copper tabs for low resistance
Internal "Drop Connection" design to ensure low resistance and consistent internal solder joints
Rotor:
Sintered rotor
High quality neodymium magnet material for lasting magnetism
Can Assembly:
High flow vent holes to allow air flow in and out for lower operating temps
Machined all aluminum anodized can, front plate and end bell
Infinitely adjustable timing
Dual precision ball bearings
Overall:
Every motor tested in house during the assembly and packaging process
Spec/test sheet provided uniquely for every motor to ensure quality
Designed to comply with ROAR specifications
Lightweight completed design
Packaged in reusable cushioned storage container
This product was added to our catalog on August 10, 2021
PTK-2107, ProTek RC Braided Brushless Motor Sensor Cable (90mm)
This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness.
The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a free moving and shock absorbing sensor cable while ensuring smooth, consistent and reliable data transfer between your ESC and motor. Choose from between 90mm and 300mm lengths.
This product was added to our catalog on December 16, 2021
PRODUCT FEATURES
540 Brushless Sensorless Motor (3300kv)
Input Voltage: 6-8v Max
Constant Current: 58A Max
Constant Watts: 420W
No Load Current: 5A
Dimensions (Diameter x Length): 36mm x 50mm
Connector: 4mm male bullet
PRODUCT FEATURES
2720kv 540 brushless motor
Input Voltage: 7-12v Max
Dimensions (Diameter*Length): 36mm*50mm
Shaft size: 3.2mm
Connector: 4mm male bullet
SPMXSEM0501, Spektrum RC Firma Brushless Motor/ESC 2-in-1 Combo (6000Kv)
This is the Spektrum RC Firma Brushless Motor/ESC 2-in-1 Combo. This powerful brushless combo is an excellent drop in brushless system for Mini vehicles such as the Losi Mini-T, Mini-B and Mini JRX2. This system contains a high-torque and high speed 6000kv brushless sensorless motor that is designed for bashing and sport racing applications. The motor features the same basic dimensions and mounting patterns as industry-standard, 1/16 to 1/18, 280-size brushed motors, making it easy to install and setup. These motors also offer high performance over a longer lifetime with little to no maintenance.
Features:
Drop-in brushless upgrade for Losi Mini-T, Mini-B and Mini JRX2
Integrated 20 amp ESC
2-in-1 design reduces space requirements
EC2 connector that is compatible with popular battery types used in 1/18th scale models
Perfect upgrade for brushed 280 motors with the same diameter
Industry standard mounting hole patterns
High torque and high RPM 6000kv Brushless Sensorless motor
Counter-clockwise operation only
Easy programming via one-button interface
High-quality construction with ball bearings
Hardened steel 2mm motor shaft
Low maintenance design
Easy installation
Specifications:
Input Voltage: 2S LiPo
RPM/Volt (Kv): 6000
Motor Type: Brushless
Maximum Burst Current: 40A
Maximum Continuous Current: 20A
Connector Type: EC2
BEC: Yes
BEC Type: Switching
BEC Continuous Current: 1A
Motor Design: Inrunner
Reverse: Yes
Forward: Yes
Auto Cutoff: Yes
Overload Protection: Yes
Shaft Diameter: 0.07" (2mm)
Outer Diameter: 0.94" (24mm)
Product Length: 1.41" (36mm)
Includes:
(1) Firma Brushless Motor/ESC 2-in-1 Combo (6000Kv)
(1) Product Manual
This product was added to our catalog on December 12, 2022
SPMXSEMC05, Spektrum RC Firma 150 Amp Sensorless Brushless Smart ESC & Motor Combo (2050Kv)
Spektrum Firma 150 Amp Sensorless Brushless Smart ESC & Motor Combo, with included 2050Kv motor. Like every component in the Spektrum Smart ecosystem, Firma Smart ESCs combine "plug-and-play" simplicity with the ability to communicate with other Spektrum Smart electronics.
Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best.
With Firma Smart ESCs, you'll be better connected to your vehicle than ever before — without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity*. Firma ESCs not only gather the data, but also send it to your Smart compatible transmitter in real time, allowing the ability to adjust settings as needed to boost performance on the go.
This ESC comes bundled with a Spektrum Firma 2050Kv Brushless Motor capable of handling everything this ESC can put out that is a perfect to get you driving with Spektrum Smart technology.
*NOTE: Smart functionality requires use of Spektrum Smart compatible battery, transmitter and receiver.
Features:
Smart all-in-one telemetry*
Fast, powerful 32-bit ARM M4 processor
Waterproof
Multiple options for easy programming:
Button programming
Smart ESC Programming Box
SmartLink USB Updating and Programmer application
Multi-point protection:
Over-current protection
Automatic LiPo low-voltage cutoff
Thermal protection
Failsafe protection
Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC manufacturer
Comes bundled with Spektrum Firma 2050Kv Brushless Motor
Compact for easy installation in most applications
Ready to install — no soldering required
Rugged plastic case with mounting tabs
Aluminum heat sink for high efficiency
Cooling fan
Adjustable high-power BEC
Firmware updatable through the Smart ESC Programming Box
High heat-resistant IC™ connectors, backwards compatible with EC™ connectors
Limited 1-year warranty
Specifications:
Auto Cutoff: Yes
BEC: Yes
BEC Continous Current: 5A
BEC Type: Linear
BEC Voltage: 6V
Battery Connector: IC5
Battery Input Lead: IC5, EC5 compatible
Brakes: Yes
Forward: Yes
Height: 1.5" (38.5mm), ESC
Input Voltage: 3S - 6LiPo
Length: 2.3" (58mm), ESC
Low-Voltage Cutoff Programmable: Yes
Maximum Burst Current: 950A
Maximum Continuous Current: 150A
Motor Connector: 4mm Bullet
Motor Output Lead: 5.9" (150mm) 10AWG
Output: 3000W
Overload Protection: Yes
Programmable: Yes
RPM/Volt (Kv): 2050Kv
Reverse: Yes
Sensored: No
Weight: 8.4oz (238g), ESC
Width: 1.9" (47.5mm) without tabs, 2.3" (59.5mm) with tabs, ESC
Includes:
(1) Spektrum™ Firma™ Smart ESC
(1) Spektrum™ Firma™ 2050Kv Brushless Motor
(1) Spektrum Smart sticker sheet
(1) Product Manual
Needed to Complete:
LiPo Battery w/EC5 or Spektrum Smart Battery w/IC5 connector*
*NOTE: Smart functionality requires use of Spektrum Smart compatible battery, transmitter and receiver.
This product was added to our catalog on March 12, 2021
SPMXSEMC06, Spektrum RC Firma 160 Amp Sensorless Brushless Smart ESC & Motor Combo (1250Kv)
Spektrum Firma 160 Amp Sensorless Brushless Smart ESC & Motor Combo, with included 1250Kv motor. Like every component in the Spektrum Smart ecosystem, Firma Smart ESCs combine "plug-and-play" simplicity with the ability to communicate with other Spektrum Smart electronics.
Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best.
With Firma Smart ESCs, you'll be better connected to your vehicle than ever before — without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity*. Firma ESCs not only gather the data, but also send it to your Smart compatible transmitter in real time, allowing the ability to adjust settings as needed to boost performance on the go.
This ESC comes bundled with a Spektrum Firma 1250Kv Brushless Motor capable of handling everything this ESC can put out that is a perfect to get you driving with Spektrum Smart technology.
Features:
Smart all-in-one telemetry*
Fast, powerful 32-bit ARM M4 processor
Waterproof
Multiple options for easy programming:
Button programming
Smart ESC Programming Box
SmartLink USB Updating and Programmer application
Multi-point protection:
Over-current protection
Automatic LiPo low-voltage cutoff
Thermal protection
Failsafe protection
Developed and designed by Spektrum™ engineers, in partnership with the industry's leading ESC manufacturer
Comes bundled with Spektrum Firma 1900Kv Brushless Motor
Compact for easy installation in most applications
Ready to install — no soldering required
Rugged plastic case with mounting tabs
Aluminum heat sink for high efficiency
Cooling fan
Firmware updatable through the Smart ESC Programming Box
High heat-resistant IC™ connectors, backwards compatible with EC™ connectors
Limited 1-year warranty
Specifications:
Auto Cutoff: Yes
BEC: Yes
BEC Continous Current: 5A
BEC Type: Switch Mode
BEC Voltage: 6V
Battery Connector: IC5
Battery Input Lead: 10AWG Dual IC5, EC5 compatible
Brakes: Yes
Bushing Or Bearing: Bearing
Cells: 4-8 cell LiPo
Connector Type: 6.5mm Bullet
Efficiency: 90%
Forward: Yes
Height: 1.8" (44mm), ESC
Input Voltage: 3S - 8S LiPo,12-35.2V
Length: 2.7" (70mm), ESC
Low-Voltage Cutoff Programmable: Yes
Maximum Burst Current: 1050A
Maximum Continuous Current: 180A,160A
Motor Connector: 6.5mm Bullet
Motor Output Lead: 6.5mm Female Bullets
Motor Type: Brushless
Number of Poles: 4
Outer Diameter: 1.9 in (49mm), motor
Output: 6300W
Overall Length: 3.3" (85mm), motor
Overload Protection: Yes
Programmable: Yes
RPM/Volt (Kv): 1250Kv
Recommended Speed Control: Spektrum Firma 160 Smart ESC
Reverse: Yes
Sensored: No
Shaft Diameter: 3/16" (5mm)
Weight: 9.9oz (280g), ESC,26.1oz (740g), motor
Width: 3.03" (77mm), ESC
Wire Gauge: 10 AWG
Includes:
(1) Spektrum™ Firma™ Smart ESC
(1) Spektrum™ Firma™ 1250Kv Brushless Motor
(1) Spektrum Smart sticker sheet
(1) Product Manual
Needed to Complete:
LiPo Battery w/EC5 or Spektrum Smart Battery w/IC5 connector*
*NOTE: Smart functionality requires use of Spektrum Smart compatible battery, transmitter and receiver.
This product was added to our catalog on March 12, 2021
SPMXSEMC18, Spektrum RC Firma 8A 1/24 Rock Crawler Sensored Brushless Smart ESC/Motor Combo (4500kV)
Firma 8A 1/24 Rock Crawler Sensored Brushless Smart ESC/Motor Combo. This Combo is a great choice for micro crawlers and more running on 2S LiPo power. It features a high-precision magnetic encoder and rotor position sensor that provides excellent one-to-one control feel when driving at any speed and at any angle. Perfectly suited for trail driving and rock crawling competitions. This advancement in sensored motor control allows the ESC to match the throttle input to the motor's RPM with unmatched precision. This combo is specifically designed for the Axial® SCX24 and AX24 platforms to provide the ultimate performance for maximum power and realism. Preinstalled with 2mm bullet connectors for easy installation.
NOTE: Axial SCX24 vehicles equipped with (HRZ00014) 2-in1 Receiver and (HRZ00015) transmitter requires an SLT3 Transmitter and receiver upgrade for functionality. Please refer to the manual for more information. (2021 Ford Bronco, Jeep GT Gladiator, and Jeep Wrangler will require this upgrade)
Features:
Reliable 4500Kv Sensored Brushless Motor with excellent slow speed control and smooth operation
Drop-in conversion to all Axial 1/24th Scale SCX24 & AX24 RTR vehicles.
Crawler mode with forward, instant reverse and drag brake
Compact Size and Ready to Install
ESC Specifications:
Type: Brushless Sensored
Input Voltage: 1-2S
BEC Voltage: 5V
Weight: 10g
Connector Type: PH 2.0 (High-Current Ultra Micro)
Maximum Burst Current: 40A
Water-Resistant: No
Programmable: No
Motor Specifications:
Type: Brushless Sensored
Input Voltage: 1-2S
kV Rating: 4500kV
Weight: 16g
Connector Type: 2mm Bullets
Poles: 2
Water-Resistant: No
Programmable: No
Includes:
(1) 4500Kv Sensored Brushless Motor
(1) 8 Amp (40 Amp Burst) 1-2S Compatible ESC
This product was added to our catalog on May 8, 2024
SPMXSM1700, Spektrum RC Firma Sensorless Brushless Motor (2050Kv)
Spektrum Firma Sensorless Brushless Motor. This motor is included with, and is a replacement for the Spektrum Firma 150 Amp ESC/Motor combo (SPMXSEMC05).
This product was added to our catalog on March 12, 2021
SPMXSM2000, Spektrum RC Firma 3660 4-Pole Brushless Motor (3200kV)
Spektrum RC Firma 3660 4-Pole Brushless Motor. This motor makes a great option for most Arrma 3S BLX models. Package includes one brushless motor.
This product was added to our catalog on April 15, 2021
SPMXSM2200, Spektrum RC Firma 550 Sensorless Brushless Motor (1900Kv)
Spektrum Firma 550 Brushless Motor. This motor is a replacement for the Losi Lasernut buggy, but can be used in other 550 motor applications that are compatible with a sensorless motor. This 1900kv motor has a 5mm motor shaft, and includes factory installed bullet connectors.
This product was added to our catalog on May 22, 2021
TEKTT2302, Tekin RX8 GEN3 1/8 Competition Brushless ESC
Tekin's RX8 GEN3 brings bigger power handling capabilities and increased reliability to 1/8 Scale Racing. The RX8 platform has proven itself to handle the rigors of racing, while providing professional features including a programmable High Voltage BEC, Data Logging Capabilities, Timing Profiles, Voltage Cutoffs for LiPos, HotWire 3.0 Bluetooth Connectivity and more. Utilizing Tekin's D2 Dual Drive Mode Technology, the RX8 runs both Sensored and Sensorless motor drives seamlessly, giving you the best of both worlds. The small footprint makes install on any chassis easy with the option of mounting with included hardware for extra security. Combo the RX8 GEN3 with a Tekin T8 Brushless Motor for 1/8 Scale Buggies and Truggies or a Pro4HD for 4WD Short Course domination!
Features:
Updated HD Gold-plated Solder Posts for Easy Soldering
Updated Adjustable Torque Control
Updated Adjustable Throttle and Brake Frequencies
Updated HD High Voltage Programmable BEC
Ultra-smooth and Precise Throttle and Braking Control
Compatible with Brushless and Brushed Motors
Easily Access Programming, Anywhere, Anytime
Datalogging Capability
EZ Access HotWire Programming Port
HotWire Interface for Advanced Programming and Updating
D2: Dual Drive Mode Technology
On-Board Temperature Indicator
HDAC: High Density Copper PCB's
Sensor Plug for Precise Commutation with all Motors
Self Test Diagnostics and Factory Reset
Pit Tune Mode
DGF2: Digital Glitch Filtering V2
QuickTune Programming
One-Touch Radio Calibration
Specifications:
Controls: Forward/Brake/Reverse
Input Voltage: 2S-6S LiPo / 4-16S NiMH-NiCD
BEC: 6.0v / 7.4v @ 8amps
Motor Limit Brushless Mode: 2S - No Limit; 3S - 4000kV; 4S - 3500kV; 5S - 2200kV; 6S - 2200kV
Motor Limit Brushed Mode: No Limit
Max Current: 300amps per phase*
Burst Current: 1000amps per phase*
Timing Profiles: 7 choices (on board)
Brushed Modes: FWD Only / FWD-REV / FWD-REV Delay
Brushless Modes: FWD Only / FWD-REV / FWD-REV Delay
Dimensions: 1.5 x 2.2 x 1.4" / 38 x 55.8 x 35.5mm
Weight: 2.7oz / 76.5g
Recommended Applications: 1/10 4WD SCT, 1/8 4WD Buggy, 1/8 4WD Truggy, 1/8 4WD Monster Truck, 1/8 4WD Touring Car, 1/8 4WD GT, 1/8 Dirt Oval, 1/10 (and larger) Rock Crawler
*Per Manufacturer Specs
This product was added to our catalog on December 12, 2021
TEKTT2518, Tekin Pro4 HD 4-Pole Brushless 550 Motor w/5mm Shaft (4,300kV)
This is the Tekin Pro4 HD 4300kV 4-Pole Brushless Motor. Tekin's Pro4 HD Motor raises the bar in 4wd short course, with the torque and power needed to level the competition. With kV ranges to accommodate 2S, 3S and 4S applications, 1/10 4WD Short Course has never been exposed to this much power! The Pro4 HD's longer 550 can and 4 pole design delivers the off the charts performance gains you need to move your truck to the front of the pack.Features:
Designed to be paired with the RX8 Electronic Speed Control
4 Pole 12 Slot Hi-torque 550 Motor Design
CNC Machined 6061 T6 Billet Aluminum Heatsink Can
Neodymium Sintered Magnets
Rebuildable Design
High Purity Copper Windings Maximizes Efficiency
Precision Engineered for Maximum Energy Conversion
Dual-Plug Sensor Wire Harness for use with all sensored systems
High RPM ABEC5 Oversized Bearings
Specifications:Turns: 1.5DVoltage: 2S - 7.4VkV: 4300Rotor: 18.5mmWeight: 7.8oz / 221gShaft Dimensions: .60x.196" / 15.3x5mmMotor Diameter: 1.4" / 35.8mmMotor Length: 2.5" / 62.5mmBearing Dimensions: Front: 5x14x5mm / Rear: 5x11x5
This product was added to our catalog on December 12, 2021
TRA6814, Traxxas VXL-3S Velineon Brushless Power System Combo (Waterproof)
The next generation of extreme brushless horsepower is here, Ready-To-Race® from Traxxas—and now waterproof! Velineon™ is the ultimate brushless system delivering the tire melting horsepower, supercharged speeds, and ease of use that you expect from Traxxas. Just plug it in and it works.
The key to the Velineon’s extreme power output is total system optimization. Each component, from the Traxxas high-current battery connector, to the powerful Velineon 3500 brushless motor, is carefully engineered to work with other system components to eliminate restriction and allow maximum power flow. High-frequency transistors and advanced circuit design delivers incredibly smooth and refined throttle control. The Velineon system accepts the widest range of battery types, including 3-cell Lithium Polymer packs (3S LiPo packs). Built-in low-voltage detection in the VXL-3s electronic speed control helps keep LiPo battery packs in top condition.
Traxxas’ exclusive waterproof technology allows the Velineon system to operate in wet conditions, including mud and snow, with no special precautions required. You decide where the Velineon powered adventure leads—the only limits are your imagination.
Key Features:
Now Waterproof
Compatible with brushed, brushless and sensored brushless motors
Auto-detects the motor type
Accepts NiCad, NiMH (4-10 cells), and LiPo (2-3cells) battery packs
Built-in-two-stage low-voltage detection for LiPo battery packs
3 drive profiles:Sport Mode, Race Mode, and Training Mode
Two-Stage Thermal shutdown protection
Velineon 3500 Brushless Motor
10-Turn, 3500kV
Optimized for extreme power and efficiency in 1/10 vehicles
This product was added to our catalog on May 7, 2021
TRA3351R, Traxxas Velineon 3500 Brushless Motor (10T/3500kV)
This is the Traxxas Velineon 3500 Brushless Motor. The Velineon 3500 Brushless Motor features a precision balanced rotor, high-speed ball bearings, and ultra high-temperature Neodymium magnets for a great blend of power and long-life. The Velineon 3500 delivers consistent, high-power output, run after run.
Features:
Ultra high-temperature sintered Neodymium magnets provide
massive torque and linear power
Optimized for power and efficiency in 1/10th scale vehicles
Consistent, high-power output, run after run
Low-maintenance, unique Traxxas design
Efficient, high-speed ball bearings
Low maintenance design
Precision-balanced rotor
Protective end cap
10-Turn, 3500Kv
Rebuildable
Hex hardware
Brilliant blue-anodizing finish
Silicon steel laminations
Delivers more power than comparable brushed motors
Note: The motor is not compatible with the older TRA3355X ESC. It must be used with the newer TRA3355R ESC.
This product was added to our catalog on May 8, 2021
TRA3352R, Traxxas VXL Velineon 3500 Brushless Motor Rebuild Kit
This is a Traxxas Motor Rebuild Kit for the VXL Velineon 3500 Brushless Motor. This is the updated kit, replacing the now discontinued TRA3352 rebuild kit. This rebuild kit includes one Velineon 3500 plastic endbell, two 5x11x4mm ball bearings, four 2.5x5mm BCS screws (with threadlock) and one rear bushing.
This product was added to our catalog on May 7, 2021
TRA3370, Traxxas Velineon VXL-3M Waterproof 1/16 Scale Brushless Power System
Fits:
Traxxas 1/16 E-Revo
Traxxas 1/16 Mustang
Traxxas 1/16 Race Truck
Traxxas 1/16 Rally
Traxxas 1/16 Slash
Traxxas 1/16 Summit
This is the Traxxas Velineon® VXL-3m forward/reverse brushless electronic speed control/Velinion 380 motor combo, and is intended for use with 1/16 scale vehicles.
The Velineon ESC simplifies brushless technology with easy, built-in profiles and intuitive programming. The VXL-3m™ uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5™ family of ESCs so there's no tricky new procedures to learn. Traxxas' exclusive patent-pending Training Mode™ is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3m is equipped with two-stage low voltage detection to allow LiPo battery use, including powerful 11.1-volt 3S packs!
The Velineon® 380 Brushless Motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision balanced rotor for big power and long-life. Since there are no brushes or commutator to wear out, the need for maintenance is virtually eliminated. The Velineon 380 delivers consistent, high-power output, run after run.
Velineon VXL-3m Features:
Traxxas High-Current Connector maintains pure, unrestricted power flow from the battery to the brushless power system.
Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold.
Wide range of battery options, including 6-12 cell NiMH or NiCad packs
The patent-pending Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3m by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action.
Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There's no need for additional sensor wiring and hardware complexity.
The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures.
The VXL-3m is programmable with three drive profiles:
Sport Mode – Fwd / Brake / Rev
Race Mode – Fwd / Brake
Training Mode™ – 50% Fwd / Brake / 50% Rev
Multi-color LED provides clear feedback
Two-stage thermal shutdown protection protects the VXL-3m from overheating.
Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound.
Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded.
Water resistent case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
Micro-fin aluminum heatsink dissipates heat.
MOSFET design provides high-current output (326 amp peak) with incredibly low resistance (.0005 (Ohm)).
Gold plated 3.5mm bullet connectors on 16-gauge Maxx® Cable flow full power to the motor without performance-strangling resistance.
Velineon 380 Features:
Ultra high-temperature sintered Neodymium magnets provide
Massive torque and linear power
Optimized for power and efficiency in 1/16th scale vehicles
Consistent, high-power output, run after run
Low-maintenance, unique Traxxas design
Efficient, high-speed ball bearings
Precision-balanced rotor
8-Turn, 4000KV
Rebuildable
Hex hardware
Brilliant blue-anodized finish
Silicone steel laminations
Delivers more power than comparable brushed motors
VXL-3M Specifications:
Input Voltage: 6 to 12 cells NiMH, 2S to 3S LiPo
Case Size: 26.5mm W x 46.5mm D x 22mm H
Weight: 38 grams
Motors: Sensorless Brushless
Motor Limit: None
On Resistance: 0.0005 Ohms
PWM Frequency: 12,000Hz
Peak Current: 326A
Continuous Current: 52A
BEC Voltage: 6.0V DC
Motor / Battery Wiring: 16-Gauge Maxx® Cable
Transistor Type: MOSFET
Low Voltage Detection: 2-Stage indicators, switchable (on or off)
Thermal Protection: 2-Stage thermal shutdown
Single-button setup: Yes, Traxxas EZ-Set®
Battery Input Connector: Traxxas High-Current Connector
Motor Connector: TRX 3.5mm Bullet Connectors
Velineon 380 Specifications:
Type: Sensorless Brushless
kV (RPM/Volt): 4000kV (8T)
Magnet Type: High Temp Sintered Neodymium
Connection Type: TRX 3.5mm Bullet
Wire Size: 16g Maxx Cable
Continuous Current: 25A
Max Current: 50A Burst
Max RPM: 50,000
Weight: 140g (4.94oz)
This product was added to our catalog on May 7, 2021
TRA3371, Traxxas Velineon 380 Brushless Motor
This is the Traxxas Velineon 380 Brushless motor, and is intended for use with the Traxxas 1/16 E-Revo and 1/16 Slash vehicles, but is also a excellent choice for any surface application that requires a 380 size motor.
The Velineon® 380 Brushless Motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision balanced rotor for power and long-life. Since there are no brushes or commutator to wear out, the need for maintenance is virtually eliminated. The Velineon 380 delivers consistent, high-power output, run after run.
Velineon 380 Features
Ultra high-temperature sintered Neodymium magnets provide massive torque and linear power
Optimized for power and efficiency in 1/16th scale vehicles
Consistent, high-power output, run after run
Low-maintenance, unique Traxxas design
Efficient, high-speed ball bearings
Precision-balanced rotor
8-Turn, 4000KV
Rebuildable
Hex hardware
Brilliant blue-anodized finish
Silicone steel laminations
Delivers more power than comparable brushed motors
This product was added to our catalog on September 7, 2021
TRA3382, Traxxas BL-2S Brushless Power System Combo
The water-resistant BL-2s speed controller offers the advantages of brushless technology while incorporating the expected safety and convenience features from Traxxas. With built-in low-voltage detection, thermal shutdown protection, and EZ-Set one-button programming, the BL-2s ensures reliability and user-friendly operation.
The brushless BL-2s 3300 kV motor operates sensorlessly, offering the expected speed and torque of brushless technology without the hefty price tag. With its brushless design, the BL-2s ensures longevity and minimal maintenance needs. Equipped with low-friction ball bearings and an integrated cooling fan, it guarantees extended, maintenance-free enjoyment throughout your run.
Features:
ESC
Perfect upgrade for your stock Brushed traxxas!
Built-in two-stage low voltage and thermal detection
Patented Training Mode reduces the power output by 50% for new or younger drivers
EZ-Set one-button setup operates and programs
Three driving profiles Sport, race and Training mode
Motor
Integrated cooling fan
High-speed ball bearings
Quick connect motor plug
Specifications:
ESC:
Scale: 1/10
Brushed/Brushless: Brushless
Sensored/Sensorless: Sensorless
Waterproof: Yes
Current:
Input Voltage: 2S LiPo (7.4V MAX)
BEC Output: 6V
Output Connectors: Traxxas Quick Connect
Dimensions: 2.3x1.5x1.2" (59x39x31mm)
Weight: 3.06oz (87g)
Motor:
Input Voltage: 2S LiPo
KV: 3300kV
Motor Diameter: 1.455" (37mm)
Motor Length: 2.24" (57mm)
Weight: 7.09oz (201g)
Includes
(1) Traxxas BL-2s Brushless ESC
(1) Traxxas BL-2s Sensorless Brushless Motor
This product was added to our catalog on September 15, 2023
TRA3384, Traxxas BL-2s Brushless Motor (3300kV)
Traxxas BL-2s Brushless Motor. This replacement motor is intended for the Traxxas Rustler 4x4, Slash, and Slash 4x4. This motor is designed to deliver brutal 2S power and speeds. The built in cooling fan combined with low-friction bearings ensure long lasting, efficient performance. The motor connection features a quick, single connector for easy setups with the BL-2s ESC. Package includes one brushless motor.
NOTE: This motor is only designed for 2S use with the BL-2s ESC.
This product was added to our catalog on September 15, 2023
TRA3461, Traxxas Velineon 540XL Brushless Motor (2400Kv)
This is a replacement Traxxas Velineon 540XL 2400Kv Brushless Motor. This motor is a replacement for the Traxxas Maxx and features 12-gauge wire and gold-plated bullet connectors to make it easy to install.
Fits:
Traxxas Hoss
Traxxas Maxx WideMaxx
Traxxas Maxx
This product was added to our catalog on April 28, 2021
TRA3480, Velineon® VXL-6s Brushless Power System, waterproof (includes VXL-6s ESC SKU: TRA3485 and 2200Kv, 75mm motor SKU: TRA3481)
Traxxas Velineon VXL-6S Brushless Power System. This replacement power system is intended for the Traxxas E-Revo VXL 2.0 or the Unlimited Desert Racer. Package includes one motor and one ESC.Specifications:
ESC:
Input Voltage: (2) 2s or 3s LiPos (Max 25.2 volts)
Case Size: 2.23in (58mm) x 2.83in (72mm) x 1.81in (46mm)
Weight: 206.5g (7.28oz)
Motor Connectors: Traxxas 6.5mm Bullet Connectors
BEC Voltage: 6.0 V
BEC Continuous Current: 10A
BEC Peak Current: 20A
Power Wire: 10-Gauge Maxx® Cable
Motor:
kV: 2200
Can Length: 77.5mm
Can Diameter: 41.8mm
Total Length: 98.5mm
Shaft Length: 21mm
Shaft Diameter: 4.99mm
Replacement part for these models:
E-Revo VXL Brushless
Unlimited Desert Racer
This product was added to our catalog on April 12, 2021
TRA3483, Traxxas Sledge 77mm Brushless Motor (2000Kv)
Traxxas 2200kv 77mm Brushless Motor. This is a replacement motor used on the Traxxas Sledge. Features include pre-installed 6.5mm gold plated connectors and a high efficiency heatsink motor can. Package includes one complete motor.
Fits:
Traxxas Sledge
This product was added to our catalog on June 30, 2021
TRA3484, Traxxas Sledge Velineon VXL-6s ESC Brushless Power System, waterproof (includes VXL-6s ESC and 2000Kv, 77mm motor)
Replacement part for these models:
Traxxas Sledge
This product was added to our catalog on April 11, 2021
TRA3491, Traxxas Velineon 1200XL Brushless Sensorless Motor (X-Maxx/XRT)
Traxxas Velineon 1200XL 1275kV Brushless Sensorless Motor. This replacement motor is intended for the Traxxas X-Maxx and XRT 8S monster truck platforms. Package includes one Velineon 1200XL 1275kV brushless Sensorless motor.
This product was added to our catalog on September 7, 2021
TRA6250, Traxxas TRX-4M Brushless Motor / ESC Combo (3350kV)
The TRX-4M Brushless Power System gives you up to 50% more speed and more crawling torque and precision than brushed power systems. Rip wheelies in your monster truck or navigate a technical crawling course in your custom High Trail rig. The new TRX-4M Brushless Power System gives you the best of both worlds!
Brushless Outrunner Motor
3350 Kv
Field-Oriented Control (FOC)
Laser-etched motor can
Includes 11-tooth brass pinion gear
High-torque output
Brushless ECM
Compatible with TQ and TQi transmitters
Use with 2s TRX-4M iD LiPo batteries
True plug-and-play compatibility
Two servo output channels
Two Pro Scale lighting ports
Three drive modes:
Sport (Fwd/Rev/Brake trail running)
Trail (light trail braking)
Crawl (hill hold)
This product was added to our catalog on September 18, 2024
TRIDM20, Drag Master 2.0T Holeshot Brushless Motor
Designed for all out power and speed needed for Extreme - Drag Racing, Pan Cars & Touring CarsStandard Race SPEC Features:Aluminum based sensor board for true sensor alignmentInfinite Timing Adjustment2mm Copper TabsThicker Pure Copper Solder Tabs and CollectorThermal Stator Coating for the best heat dissipation possibleTurbine style vented noseMore Vents for More Cooling220C wire coatingCertified Gauge High Temperature WireShort Stack Stator DesignStator MaterialGrade 5 Ball BearingsUses all D3.5, D4 and 24K Rotors10,000+Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number.* MAX Voltage 11.1v 3 Cell Lipo Battery
TRIDM25, Drag Master 2.5T Holeshot Brushless Motor
Designed for all out power and speed needed for Extreme - Drag Racing, Pan Cars & Touring CarsStandard Race SPEC Features:Aluminum based sensor board for true sensor alignmentInfinite Timing Adjustment2mm Copper TabsThicker Pure Copper Solder Tabs and CollectorThermal Stator Coating for the best heat dissipation possibleTurbine style vented noseMore Vents for More Cooling220C wire coatingCertified Gauge High Temperature WireShort Stack Stator DesignStator MaterialGrade 5 Ball BearingsUses all D3.5, D4 and 24K Rotors10,000Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number.* MAX Voltage 11.1v 3 Cell Lipo Battery
TRIDM40, Drag Master 4.0T Holeshot Brushless Motor
Designed for all out power and speed needed for Extreme - Drag Racing, Pan Cars & Touring Cars
Standard Race SPEC Features:
Aluminum based sensor board for true sensor alignment
Infinite Timing Adjustment
2mm Copper Tabs
Thicker Pure Copper Solder Tabs and Collector
Thermal Stator Coating for the best heat dissipation possible
Turbine style vented nose
More Vents for More Cooling
220C wire coating
Certified Gauge High Temperature Wire
Short Stack Stator Design
Stator Material
Grade 5 Ball Bearings
Uses all D3.5, D4 and 24K Rotors
8150Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in KV's due to the fact that timing and voltage can effect the KV number.
* MAX Voltage 11.1v 3 Cell Lipo Battery
TRIPUN1000, Punisher 10.5 Turn Spec Class Brushless Motor
Features:
Infinite Timing Adjustment
True Zero Point
Updated Sensor Board Design
Open Bearing On Sensor End For Easy Cleaning and Oiling
Lower Resistance Solder Tabs
Maximized Can Cooling Vents
TRIPUN1001, Punisher 13.5 Turn Spec Class Sensored Brushless Motor
Features:
Infinite Timing Adjustment
True Zero Point
Updated Sensor Board Design
Open Bearing On Sensor End For Easy Cleaning and Oiling
Lower Resistance Solder Tabs
Maximized Can Cooling Vents
TRIPUN1002, Punisher 17.5 Turn Spec Class Sensored Brushless Motor
Features:
Infinite Timing Adjustment
True Zero Point
Updated Sensor Board Design
Open Bearing On Sensor End For Easy Cleaning and Oiling
Lower Resistance Solder Tabs
Maximized Can Cooling Vents
TRIREV1114, X Factor 5.0T Modified Sensored Brushless Motor
Features:
10% Lighter than Previous Motors
Weight (158g avg)
New Sensor Board Design.
0 - 60 Degrees of Timing adjustment
Revolutionary timing ring & locking end plate systems saves weight Only 6 short screws
X-Flow Cooling which pulls more air through the can, reducing motor temps
2pc CNC Machined Aluminum can allows for more accurate deviation reading
NEW 90 Degree Solder Tabs
The X-Factor Modified Series come assembled with TEP1151 Rotor.
After months of hard work and testing we are proud to show off the all new Slot Machine. They say that you should never forget where you come from. Here at Team Trinity we always like to take a good trip down memory lane to never forget where we came from. With that said, we are happy to bring back the Slot Machine name with our newest spec motor!The Slot Machine picks up exactly where the X-Factor left off but goes a few steps further. The Slot Machine has a brand new, ground up, stator design that was designed with speed, durability, and efficiency all in mind. Both ends feature CNC machined end plates not only for looks, but functionality as well. With tons of space for heat to escape, you can be confident that your Slot Machine is staying cool in even the hottest of conditions. Having an open stator design not only helps with heat, but also allows for the use of long screws. The long screws go through both end plates as well as the new stator with new, reformulated, epoxy specially designed for strength as well as heat dissipation. Both durability and efficiency all in one! Not only that but, all new 90 degree solder tabs make soldering up your brand new Slot Machine a breeze!
Features:
New 90 degree solder tabs
2pc CNC Machined Aluminum can allows for more accurate deviation readings
X-Flow Cooling which pulls more air through the can, reducing motor temps
Infinite timing adjustment capabilities
Modular Design with whole-can length hardware and replaceable end caps
All new stator design with an immense amount of low end torque without skimping on efficiency
After months of hard work and testing we are proud to show off the all new Slot Machine. They say that you should never forget where you come from. Here at Team Trinity we always like to take a good trip down memory lane to never forget where we came from. With that said, we are happy to bring back the Slot Machine name with our newest spec motor!The Slot Machine picks up exactly where the X-Factor left off but goes a few steps further. The Slot Machine has a brand new, ground up, stator design that was designed with speed, durability, and efficiency all in mind. Both ends feature CNC machined end plates not only for looks, but functionality as well. With tons of space for heat to escape, you can be confident that your Slot Machine is staying cool in even the hottest of conditions. Having an open stator design not only helps with heat, but also allows for the use of long screws. The long screws go through both end plates as well as the new stator with new, reformulated, epoxy specially designed for strength as well as heat dissipation. Both durability and efficiency all in one! Not only that but, all new 90 degree solder tabs make soldering up your brand new Slot Machine a breeze!
Features:
New 90 degree solder tabs
2pc CNC Machined Aluminum can allows for more accurate deviation readings
X-Flow Cooling which pulls more air through the can, reducing motor temps
Infinite timing adjustment capabilities
Modular Design with whole-can length hardware and replaceable end caps
All new stator design with an immense amount of low end torque without skimping on efficiency
Slot Machine 21.5T Race Spec Brushless Motor w/TEP1119 Rotor
After months of hard work and testing we are proud to show off the all new Slot Machine. They say that you should never forget where you come from. Here at Team Trinity we always like to take a good trip down memory lane to never forget where we came from. With that said, we are happy to bring back the Slot Machine name with our newest spec motor!The Slot Machine picks up exactly where the X-Factor left off but goes a few steps further. The Slot Machine has a brand new, ground up, stator design that was designed with speed, durability, and efficiency all in mind. Both ends feature CNC machined end plates not only for looks, but functionality as well. With tons of space for heat to escape, you can be confident that your Slot Machine is staying cool in even the hottest of conditions. Having an open stator design not only helps with heat, but also allows for the use of long screws. The long screws go through both end plates as well as the new stator with new, reformulated, epoxy specially designed for strength as well as heat dissipation. Both durability and efficiency all in one! Not only that but, all new 90 degree solder tabs make soldering up your brand new Slot Machine a breeze!
Features:
New 90 degree solder tabs
2pc CNC Machined Aluminum can allows for more accurate deviation readings
X-Flow Cooling which pulls more air through the can, reducing motor temps
Infinite timing adjustment capabilities
Modular Design with whole-can length hardware and replaceable end caps
All new stator design with an immense amount of low end torque without skimping on efficiency
TRITEP2023T, Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor (21.5T)
This is the Team Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor. Using an updated stator design gives this motor more speed, durability and efficiency. Adding to this the highly CNC milled motor case reduces weight and allows heat to escape easily. With high quality construction, innovative internal components and looks that will make your friends envious, the Team Trinity Revtech "Slot Machine" motor is a must have.This Team Spec edition is in the top 5% of the batch of motors. Every team motor goes through rigorous inspection process and only the top 5% get to become Team Spec motors.Features:
Updated 90 degree solder tabs
2pc CNC Machined Aluminum can allows for more accurate deviation readings
X-Flow Cooling which pulls more air through the can, reducing motor temps
Infinite timing adjustment capabilities
Modular Design with whole-can length hardware and replaceable end caps
Updated stator design with an immense amount of low end torque without skimping on efficiency
Reformulated thermal Epoxy for best in class thermal dissipation
Ultra-Rare Earth material magnets for heat resistance and longevity
Same proven sensor board as X-Factor Modified
Sealed bearings for durability and high performance
TRITEP1119 12.5x25.5mm Rotor Included!
Designed well within ROAR, EFRA, and BRCA standards
Team Spec Edition Features:
Top 5% of all stators
Marked Resistance numbers in the box
Visually inspected for imperfections
Includes:
(1) 21.5T Team Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor
(1) Sensor cable
This product was added to our catalog on October 25, 2022.
Drag racing has proven to be one of the most demanding disciplines in the RC industry. With how powerful the cars are, some manufacturers are struggling to keep up with the demand of new parts and releases. Luckily for you, we at Team Trinity are staying at the forefront! Don't let that make you think they are rushing out products like their competitors though, with months of testing under their belts they are proud to bring the Double Down 4 Pole Drag Motor to market!The Double Down 4 Pole is a special design for drag racing. On each side of the stator are Gold and Black CNC endplates that not only look incredible but offer tons of space for airflow to get through. This design also allows for long, full length, screws that will keep the motor together even at the highest of vibrations. The stator uses a thermal epoxy to stay cool as well as strong. All this houses a rotor with special metal jacket for protection in the hardest of environments and an 1/8in shaft. The Double Down also uses their 90 degree solder tabs for easy soldering! When looking at the tabs you'll also notice that their 4-pole has adjustable timing options! Chances are if you're not running a Double Down, you're chasing one!
Features:
90 degree solder tabs
2pc CNC Machined Aluminum can allows for more accurate deviation readings
X-Flow Cooling which pulls more air through the can, reducing motor temps
Adjustable timing capabilities
Modular Design with whole-can length hardware and replaceable end caps
Reformulated thermal Epoxy for best in class thermal dissipation
The Yokomo Drift Performance DX1 "R" Brushless Motor is great for asphalt, carpet or any other high grip surface. This motor was designed to have good low end torque that smoothly rolls to the high rpm band. The cutouts in this motor look great and help keep the motor cool. Package includes one brushless motor.
Features:
Suitable for asphalt and carpet
High rotation - ideal for high-grip road surfaces
Latest stator and coil for smooth rotation
Specifications:
Turn: 10.5T
This product was added to our catalog on September 5, 2023
