95096-4, Traxxas Sledge RTR 6S 4WD Belted Tires Electric Monster Truck w/VXL-6s ESC & TQi 2.4GHz Radio
The Traxxas Sledge RTR 6S 4WD Electric Monster Truck, is an all out basher designed to give you the power and performance for serious off-road fun. This monster truck features a rock solid chassis, massive steel drivetrain, 6S power system and race inspired handling. These features lead to a truck that is designed to push the limits of off-road bashing and look good in the process. Pick up the Traxxas Sledge and leave everything else in the dust.
Powering this monster truck is a Traxxas VXL-6S Velineon ESC and a 2000kV Brushless Motor. Traxxas then used massive steel gears, a triangulated chassis and a center T-bar brace to hold up to the 6S power. A special aluminum motor cradle is used to secure the motor in place eliminating motor flex. The drive train features a torque-biasing center differential that distribute power evenly throughout the chassis. Solid steel axles are used front, center and rear to deliver the power to the wheels. The shock towers are 5mm thick and are tied directly to the center brace for further durability. Holding the truck up are large-bore GT-Maxx aluminum shocks mounted with 4mm hardware. Traxxas left no stone unturned and developed a truck that is ready for any terrain.
Features:
1/8th Scale basher designed specifically for 6S power
20% larger and 75% thicker drive gears
Triangulated chassis structure for superior chassis strength
Remove and replace the body in just seconds with exclusive clipless body
Includes a high-performance metal gear servo that produces over 347oz-in of torque
6S power system for brutal power
Durable Sledgehammer tires are used for great handling and traction
Specifications:
Truck:
Length (including wing): 23.78 inches (604mm)
Front Track: 18.10 inches (459mm)
Rear Track: 18.10 inches (459mm)
Ground Clearance: 1.95 inches (50mm)
Weight (no battery): 12.74 pounds (5.77kgs)
Height (overall): 8.43 inches (214mm)
Wheelbase: 15.10 inches (384mm)
Shock Length (front): 5.12 inches (128mm)
Shock Length (rear): 5.67 inches (144mm)
Tire Diameter: 6.7 x 3.3 inches (170mm x 84mm)
Wheel Diameter: 3.8 inches (97mm)
Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear)
Differential Type: Sealed, hardened steel bevel, limited slip
ESC:
Model: Velineon VXL-6s
Input Voltage (cells): 4s–6s LiPo (max: 25.2 volts)
BEC Voltage: 6.0 V
BEC Current Continuous: 10 A
BEC Current Peak: 20 A
Reverse Delay: Yes, with lockout
Motor:
Type: 2000 kV sensorless brushless
Connector Type: Traxxas 6.5mm bullet connectors
Includes:
(1) Traxxas RTR Sledge Monster Truck
(1) TQi 2.4GHz radio system
(1) Jumper plug (for 4s battery use)
(1) Quick Start Guide
High quality maintenance tools
Needed to Complete:
4S: (1) 4S 6700mAh LiPo Battery with Traxxas iD Connector or (2) 2S 7600mAh LiPo Batteries with Traxxas iD Connectors
6S: (2) 3S 5000mAh LiPo Batteries with Traxxas iD Connector
(1) Compatible LiPo Balance Charger
(4) AA Batteries
This product was added to our catalog on August 16, 2022
MTD1025, Method RC Terraform Belted Pre-Mount 1/8 Monster Truck Tires (Black) (2)
Arrma Fireteam 6S BLX
Arrma Kraton 6S BLX
Arrma Nero 6S BLX
Arrma Notorious 6S BLX
Arrma Outcast 6S BLX
The Method RC Terraform Belted Pre-Mount 1/8 Monster Truck Tires are designed to increase stability and consistency at high speeds. These Terraform tires are made from an advanced rubber compound specifically for bashing. The tread pattern is designed to tackle dirt, concrete and asphalt with tread depth for long wear and the ability to clear debris. Designed for 1/8 scale power systems, these tires feature hand-laid belts to keep ballooning to the absolute minimum. Pre-mounted to Array wheels and equipped with a removable 17mm hex.
Features:
Hand-laid belts nearly eliminate tire expansion creating a stable/consistent platform at high speeds
Less tire expansion greatly reduces the "gyro" effect reducing the overall load on the servo, axles, plastics and hub bearings
Unique tread detail throughout provides a neutral/all-around performance on an array of surfaces
Generous tread depth for long wear and the ability to easily clear debris
Pre-mounted to Method RC Array Wheels
Specifications:
Tire:
Tire Diameter: 6.77" (17.2cm)
Tire Width: 3.22" (8.18cm)
Wheels:
Hex Size: 17mm
Bead Diameter: 3.8" (97mm)
Width: 2.8" (72mm)
Center Bore: 0.48" (12.2mm)
Back Spacing: 1.69" (43mm)
Front Spacing: 1.14" (29mm)
Offset: 0.27" (7mm)
Includes:
Terraform Belted Tires
Array Wheel
Foam Insert
This product was added to our catalog on August 29, 2024
MTD1400, Method RC Velociter Belted Pre-Mount 1/7 On-Road Tires (Black) (2) w/Hive 17mm Hex Wheels
Arrma Infraction 6S BLX
Arrma Infraction V2 6S BLX
Arrma Limitless
Kyosho Inferno GT/GT2
The Method RC Velociter Belted Pre-Mount 1/7 On-Road Tires are designed to increase stability and consistency at high speeds. These Velociter tires are made from an advanced rubber compound specifically for speed runs and bashing. The tread pattern is designed to tackle concrete and asphalt with tread depth for long wear and the ability to clear debris. Designed for 1/7 scale power systems, these tires feature hand-laid belts to keep ballooning to the absolute minimum. Pre-mounted to Hive wheels and equipped with a removable 17mm hex.
Features:
Hand-laid belts nearly eliminate tire expansion creating a stable/consistent platform at high speeds
Less tire expansion greatly reduces the "gyro" effect reducing the overall load on the servo, axles, plastics and hub bearings
Unique "M" channel detail throughout provides a neutral/all-around performance on all concrete and asphalt surfaces
Generous tread depth for long wear and the ability to easily clear debris
Pre-mounted to Hive Wheels
Specifications:
Tire:
Tire Diameter: 3.94" (10cm)
Tire Width: 1.77" (4.5cm)
Wheels:
Hex Size: 17mm
Width: 1.71" (43.5mm)
Center Bore: 0.48" (12.3mm)
Back Spacing: 1.15" (29.2mm)
Front Spacing: 0.56" (14.3mm)
Offset: 0.29" (7.45mm)
Includes:
Velociter Belted Tires
Hive Wheels
Foam Inserts
This product was added to our catalog on August 29, 2024
Method RC Velociter Belted Pre-Mount 1/7 On-Road Rear Tires (Black) (2) w/Hive 17mm Hex Wheels
Arrma Felony 6S BLX
Arrma Infraction 6S BLX
Arrma Limitless
The Method RC Velociter Belted Pre-Mount 1/7 On-Road Tires are designed to increase stability and consistency at high speeds. Designed specifically for the rear of 1/7 scale RC vehicles, these Velociter tires are made from an advanced rubber compound specifically for speed runs and bashing. The tread pattern is designed to tackle concrete and asphalt with tread depth for long wear and the ability to clear debris. Designed for 1/7 scale power systems, these tires feature hand-laid belts to keep ballooning to the absolute minimum. Pre-mounted to Hive wheels and equipped with a removable 17mm hex.
Note:
Arrma 1/8 Felony Owners: These are the same diameter as the Felony front tires. Therefore, you need to change the gearing in the rear to match the front gearing. Or, you could have overdrive in the font by not changing
Arrma 1/8 Limitless Owners: These fit directly on the rear without any trimming or regearing. The 10mm wider stance enhances rear traction bias as well as providing a meaner look.
Arrma 1/8 Infraction Owners: These will work on the rear of the infraction but you will need to trim the fender flares in the rear to accommodate the wider tires. No regearing necessary as they are the same diameter as the stock rear tires.
Features:
Hand-laid belts nearly eliminate tire expansion creating a stable/consistent platform at high speeds
Less tire expansion greatly reduces the "gyro" effect reducing the overall load on the servo, axles, plastics, and hub bearings
Unique "M" channel detail throughout provides a neutral/all-around performance on all concrete and asphalt surfaces
Generous tread depth for long wear and the ability to easily clear debris
Pre-mounted to Hive Wheels
Specifications:
Tires:
Diameter: 3.94in (100mm)
Width: 2.13in (54.1mm)
Wheels:
Hex: 17mm
Width: 2.13in (54.1mm)
Center Bore: 0.84in (12.3mm)
Weight: 5.92oz(168g)
Includes:
Velociter Belted Tires
Hive Wheels
Foam Inserts
This product was added to our catalog on August 29, 2024
MTD1500, Method RC Terraform Belted Pre-Mount 1/10 Monster Truck Tire (Black) (2) w/Array Beadlock 12mm & 14mm Hex Wheels
Traxxas Jato
Traxxas Nitro Rustler
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Stampede 2wd
Traxxas Stampede 4x4
The Method RC Terraform Belted Pre-Mount 1/10 Monster Truck Tire are designed to increase stability and consistency at high speeds. These Terraform tires are made from an advanced rubber compound specifically for bashing. Each tire is firmly held in place using 40 screws that go through the bead of the tire. The tread pattern is designed to tackle dirt, concrete and asphalt with tread depth for long wear and the ability to clear debris. Designed for 1/10 scale power systems, these tires feature hand-laid belts to keep ballooning to the absolute minimum. Pre-mounted to Array wheels and equipped with a removable 12mm or 14mm hex.
Features:
Hand-laid belts nearly eliminate tire expansion creating a stable/consistent platform at high speeds
Less tire expansion greatly reduces the "gyro" effect reducing the overall load on the servo, axles, plastics and hub bearings
Unique tread detail throughout provides a neutral/all-around performance on an array of surfaces
Generous tread depth for long wear and the ability to easily clear debris
Pre-mounted to Method RC Array Beadlock Wheels
Specifications:
Tire:
Tire Diameter: 5.04" (101.6mm)
Tire Width: 2.69" (68.3mm)
Wheels:
Hex Size: 12mm/14mm
Bead Diameter: 2.8" (71mm)
Width: 1.97" (50mm)
Center Bore: 0.211" (5.4mm)
Back Spacing: Varies based on hex used
Offset: 2.1mm/9.5mm
Includes:
Terraform Belted Tires
Array Beadlock Wheels
Foam Inserts
(2) 12mm Hex 2.1mm Offset
(2) 12mm Hex 9.5mm Offset
(2) 14mm Hex 2.1mm Offset
(2) 14mm Hex 9.5mm Offset
This product was added to our catalog on August 29, 2024
PRO1016610, Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels
This is a set of two Pro-Line Black MX38 Badlands HP Belted 3.8" Truck Tires, Pre-Mounted on Raid wheels. Pro-Line Badlands tires are known for having a noticeable Motocross inspired tread and the updated Badlands MX38 HP tires improves on this with and even Bigger and Bolder knobby tread. The Badlands MX38 is a true All-Terrain tire that will find traction on any surface but is best suited for loose and loamy dirt, mud or grass.
Pro-Line has used a refined processes to mold a High-Performance herringbone weave pattern Belt directly inside of the Badlands MX38 HP tires that will prevent the tire from ballooning or expanding during use. This design gives maximum control to put the power down even at high speeds. Quit wasting tires and lay down the power with a clear conscious.
The Badlands MX38 HP 3.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive Motocross inspired tread. In response to customer demand, Pro-line has designed an updated tire size to fit the current generation of Monster Trucks and the MX38 HP delivers at 3.48" wide and 6.8" tall.
Features:
Tire:
Molded-in High-Performance Herringbone Weave Pattern Belt
Aggressive Motocross Inspired Tread Design
Badlands MX38 HP 3.8" tires Will Not Balloon or Expand During Use
Soft M2 Compound Provides Incredible Grip on a Variety of Surfaces
Belted Tires Give You Control to Put the Power Down
Tire Size comes in at 3.48" wide and 6.8" tall
Soft Foam Inserts Included
Made in the USA, since 1982
Wheel:
Removable Hexes Allow you to Easily Replace Damaged Hexes
17mm Wide Offset 8x32 Hexes are Included
Wheel Made from High-strength, Durable DuPont Nylon Material
Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
M3 Wheel Hex Hardware Included
Specifications:
Height: 6.80" (173mm)
Width: 3.48" (88mm)
Includes:
(2) Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires on Raid wheels
Fits:
Arrma Kraton 6S BLX
HPI Savage Flux HP
HPI Savage X
HPI Savage XL
Tekno RC MT410
Traxxas Revo Nitro
Traxxas Summit 1/10
Traxxas T-Maxx
This product was added to our catalog on March 4, 2021
TRA9573, Traxxas Tires + Wheels Glued 3.8In Black Wheels
Fits 17 mm splined hex, front or rear.
This product was added to our catalog on January 19, 2024
TRA9573A, Traxxas Tires+Wheels Glued 3.8In Chrome Wheels
Belted Sledgehammer® tires deliver game-changing stability and control whether you’re slinging mud or setting speed records. The wide, open-block tread design won’t clog up with dirt or debris and the lightweight belting maintains the tire’s shape for a larger contact patch, more grip, and responsive handling at any speed. The Sledgehammer’s increased diameter gives your Sledge® a more powerful stance with more ground clearance. Sledgehammer tires come pre-mounted to 3.8″ black chrome Sledge wheels with an ultra-tough glue bead for the most extreme high-speed off-road action. Fits 17 mm splined hex, front or rear.
This product was added to our catalog on January 19, 2024
