ARA310958, Arrma Limitless/Infraction Front/Rear Differential w/Straight Cut Gear (43T)
This is a replacement Arrma 43T Front/Rear Diff Set with Straight cut gear, intended for use with BLX and Roller models of the Infraction, Limitless and Typhon kits.
This product was added to our catalog on April 3, 2024
ARA320514, Arrma Infraction/Limitless Chassis Plate (Black)
This is a replacement Arrma Chassis Plate, intended for use with the Arrma Infraction and Limitless kits.
Features:
High quality aluminum for reduced vehicle weight and increased durability.
Precision manufactured hardware mounting holes for fast and easy servicing.
Anodized black for cool looks and increased durability.
Integrated droop setting plates for advanced tuning options in minutes.
Designed to provide the perfect balance of strength and consistent handling characteristics for your vehicle.
Includes:
(1) Black Aluminum Chassis
This product was added to our catalog on July 2, 2021
ARA320527, Arrma Limitless Front Splitter
This is a replacement Arrma Limitless Front Splitter, intended for use with the Arrma Limitless Roller kits.
Features:
Precision manufactured mounting holes for fast and easy maintenance
Tough and hard wearing material for long service life
This product was added to our catalog on August 20, 2021
ARA320538, Arrma Infraction/Limitless 50 Series Sliding Motor Mount Plate (Red)
This is an optional Arrma 50 Series Sliding Motor Mount Plate, intended for use with the Arrma Infraction and Limitless kits.
Features:
Precision manufactured from lightweight aluminum for reduced vehicle weight and consistent hardware fit.
Anodized red for cool ARRMA looks and increased durability.
Precision manufactured screw mounting holes for fast and easy servicing.
1 inch (25.4mm) screw pitch.
Aluminum material will assist in dissipating heat during extreme RC action.
Includes:
(1) 50 Series Sliding Motor Mount Plate
This product was added to our catalog on July 2, 2022
ARA330703, Arrma 6S EXB Shock Standoff (4)
This is a replacement pack of four Arrma Shock Standoffs, Extreme Bash Shock Standoffs that make an ideal heavy-duty replacement part for your ARRMA vehicle.
Features:
Precision machined from a high-quality steel material
Engineered to resist bending stresses seen at upper shock mount
Accurately cut M3 threads for installation of attachment hardware
Supplied in a set of four with flanged lock nuts for attachment to shock towers
Includes:
(4) EXB Shock Standoff
(4) Flanged M3 Lock Nut
Compatible with BLX/Roller/Roller EBX Models:
Felony
Infraction
Kraton
Limitless
Mojave
Notorious
Outcast
Talion
Typhon
This product was added to our catalog on November 5, 2023
ARA480026, Arrma Limitless Pre-Painted Wing Set (Matte Black)
This is a replacement Arrma Pre-Painted Wing Set, intended for use with the Arrma Limitless kits.
Features:
Includes rear wing and left and right front wing elements.
Provided pre-painted in stealth black.
Precisely machined mounting holes for fast and easy fit to your model.
Strong and durable polycarbonate material.
Molded-in cut lines for fine aero balance adjustment.
Includes:
(1) Rear Wing
(1) Left Front Wing
(1) Right Front Wing
This product was added to our catalog on July 2, 2021
ARA7116V2, Arrma Limitless V2 1/7 Scale Speed Bash Electric 4WD All-Road Roller
Using an optimized 8s power layout this V2 Limitless offers next level performance for the ultimate in speed and power. Able to run the full size 1/4 mile run in the 8 second range this vehicle is extremely capable. Coming as a pre-assembled roller you have the option to choose your own electronics giving you the ability to go from mild to wild in the power department. With a sleek design, 8s capable drivetrain and outrageous top speed capabilities the updated Limitless V2 offers a driving experience like no other.
This model is capable of an incredibly high rate of speed, and it is not recommended for inexperienced drivers. Previous experience with high-power radio controlled models is highly recommended. This model is not intended for use by children or minors younger than 16 years old. Individuals younger than 16 years old require responsible adult supervision during operation and maintenance. Additionally, when driving this model up to a 1/4 mile of traffic free, uninterrupted driving area could be required. The space in which you choose to drive should based on the setup of the model, and the potential top speed of the car.
Updated Features Include:
Easy-access sliding motor mount accepts larger diameter motors
3mm Chassis plate repositions the motor mount to also accept longer motors
39T Mod 1.0 Spool with long rear outdrive combines with a shorter rear center driveshaft to reduce drivetrain vibration
Easy-access electronics module accepts larger ESCs and includes a waterproof* receiver box
Safe-D input cups are included on the front and rear gearboxes
GP5 gears have a lower ratio for reduced centerline drivetrain speed and vibration
Wider rear track increases stability
Stiffer front springs and sway bar improve high-speed handling
The first ARRMA “Rattle Can Roller” includes a clear, low-drag body for your own unique paint scheme — window mask and decals are provided
Specifications:
Product Length: 28.74" (730mm)
Product Width: 12.28" (312mm)
Product Height: 6.5" (165mm)
Product Weight: 8.6lb (3.9kg)
Front Track: 12.2" (310mm)
Ground Clearance: 0.59" (15mm)
Inner Tire / Outer Wheel Diameter: 3.27"
Wheel Width: 1.69" (43mm)
Internal Gear Ratio: 2.8:1
Spur Gear: 39T
Differential: Two Oil-Filled Metal Gear Diffs
Drivetrain: 4WD
Shock Type: 3.03" (77mm) FR, 3.43" (87mm) RR. Aluminum Oil-Filled
Tire Compound: White
Wheel Hex Size: 17mm
Tire Tread: Hoons
Vehicle Type: All-Road
Approximate Assembly Time: 1-3 Hours
Body: LIMITLESS. Supplied Clear & Trimmed. Decal Sheet Included.
Brakes: Integral with ESC (ESC Sold Separately)
Scale: 1/7
Includes:
(1) ARRMA® LIMITLESS 1/7 Scale All-Road Speed Bash Roller
(1) Customizable Clear Body and Nose Cone
(1) Decal Sheet
(1) Window Mask Sheet
(1) Product Manual
Needed to Complete:
(1) 2+ Channel Transmitter and Receiver
(1) Metal Gear, Hi-Torque Steering Servo (23T Spline, Standard Size)
(1) Electronic Speed Control (8S recommended)
(1) Motor (50 Series – Max dimensions 4.33X1.97")
(2) 4S LiPo Battery
(1) Compatible LiPo Battery Charger
(1) Mod 1 Pinion Gear (to suit chosen motor)
This product was added to our catalog on September 17, 2022
MTD1400, Method RC Velociter Belted Pre-Mount 1/7 On-Road Tires (Black) (2) w/Hive 17mm Hex Wheels
Arrma Infraction 6S BLX
Arrma Infraction V2 6S BLX
Arrma Limitless
Kyosho Inferno GT/GT2
The Method RC Velociter Belted Pre-Mount 1/7 On-Road Tires are designed to increase stability and consistency at high speeds. These Velociter tires are made from an advanced rubber compound specifically for speed runs and bashing. The tread pattern is designed to tackle concrete and asphalt with tread depth for long wear and the ability to clear debris. Designed for 1/7 scale power systems, these tires feature hand-laid belts to keep ballooning to the absolute minimum. Pre-mounted to Hive wheels and equipped with a removable 17mm hex.
Features:
Hand-laid belts nearly eliminate tire expansion creating a stable/consistent platform at high speeds
Less tire expansion greatly reduces the "gyro" effect reducing the overall load on the servo, axles, plastics and hub bearings
Unique "M" channel detail throughout provides a neutral/all-around performance on all concrete and asphalt surfaces
Generous tread depth for long wear and the ability to easily clear debris
Pre-mounted to Hive Wheels
Specifications:
Tire:
Tire Diameter: 3.94" (10cm)
Tire Width: 1.77" (4.5cm)
Wheels:
Hex Size: 17mm
Width: 1.71" (43.5mm)
Center Bore: 0.48" (12.3mm)
Back Spacing: 1.15" (29.2mm)
Front Spacing: 0.56" (14.3mm)
Offset: 0.29" (7.45mm)
Includes:
Velociter Belted Tires
Hive Wheels
Foam Inserts
This product was added to our catalog on August 29, 2024
Method RC Velociter Belted Pre-Mount 1/7 On-Road Rear Tires (Black) (2) w/Hive 17mm Hex Wheels
Arrma Felony 6S BLX
Arrma Infraction 6S BLX
Arrma Limitless
The Method RC Velociter Belted Pre-Mount 1/7 On-Road Tires are designed to increase stability and consistency at high speeds. Designed specifically for the rear of 1/7 scale RC vehicles, these Velociter tires are made from an advanced rubber compound specifically for speed runs and bashing. The tread pattern is designed to tackle concrete and asphalt with tread depth for long wear and the ability to clear debris. Designed for 1/7 scale power systems, these tires feature hand-laid belts to keep ballooning to the absolute minimum. Pre-mounted to Hive wheels and equipped with a removable 17mm hex.
Note:
Arrma 1/8 Felony Owners: These are the same diameter as the Felony front tires. Therefore, you need to change the gearing in the rear to match the front gearing. Or, you could have overdrive in the font by not changing
Arrma 1/8 Limitless Owners: These fit directly on the rear without any trimming or regearing. The 10mm wider stance enhances rear traction bias as well as providing a meaner look.
Arrma 1/8 Infraction Owners: These will work on the rear of the infraction but you will need to trim the fender flares in the rear to accommodate the wider tires. No regearing necessary as they are the same diameter as the stock rear tires.
Features:
Hand-laid belts nearly eliminate tire expansion creating a stable/consistent platform at high speeds
Less tire expansion greatly reduces the "gyro" effect reducing the overall load on the servo, axles, plastics, and hub bearings
Unique "M" channel detail throughout provides a neutral/all-around performance on all concrete and asphalt surfaces
Generous tread depth for long wear and the ability to easily clear debris
Pre-mounted to Hive Wheels
Specifications:
Tires:
Diameter: 3.94in (100mm)
Width: 2.13in (54.1mm)
Wheels:
Hex: 17mm
Width: 2.13in (54.1mm)
Center Bore: 0.84in (12.3mm)
Weight: 5.92oz(168g)
Includes:
Velociter Belted Tires
Hive Wheels
Foam Inserts
This product was added to our catalog on August 29, 2024
STP11105, Motor Mount with Slide Adjust - fits Limitless Infraction Felony
Sliding Motor Mount with Fine Adjustment - fits Limitless v1/v2 Felony and Infraction v1/v2
Features:
- Compatible with 25mm and 30mm motors (ex. Castle 2028, Hobywing 70125, TPPower and others)
- Center diff tower and top plate included.
- Supports pinions from 14T up to 60T+
- Enclosed diff bearing to reduce vibration
- Fits Limitless v1 and v2 / Felony / Infraction v1 and v2 with brake system
- Robust Aluminum Construction
This product was added to our catalog on December 5, 2023
STP11106, Motor Mount DUAL with Slide Adjust - fits Limitless Infraction Felony
DUAL Sliding Motor Mount with Fine Adjustment - fits Limitless v1/v2 Felony and Infraction v1/v2
Features:
- Compatible with 25mm and 30mm motors (ex. Castle 2028, Hobywing 70125, TPPower and others)
- Center diff tower and top plate included.
- Supports pinions from 14T up to 60T+
- Enclosed diff bearing to reduce vibration
- Fits Limitless v1 and v2 / Felony / Infraction v1 and v2 with brake system
- Robust Aluminum Construction
This product was added to our catalog on December 21, 2023
TP1119BK, Side Skirt With Body Lock Aluminum BLACK
Side Skirts for Arrma Limitless BLACK
Features:
- Robust 3mm naval aluminum construction
- Body locks on the edges to improve air flow and reduce debris inside the car
- Anodized black
This product was added to our catalog on December 21, 2023
STP1166PL,Plastic V2 Skid plate V2.0 fits ARRMA Limitless / Infraction / Felony
Skid Plate V2.0
Features:
- Robust Aluminum Construction
- 5 part Kit
- More protection for your Chassis
- New Design with central protector
Compatibility:
- Arrma Limitless V1/V2, Infraction and Felony
This product was added to our catalog on December 21, 2023
