Products
ARRMA ARA310915, Diff Case
ARA310915, Diff Case
$15.99
ARRMA ARA310980, Arrma Kraton EXB Spiral Cut Main Differential Gear (43T)
ARA310980, Arrma Kraton EXB Spiral Cut Main Differential Gear (43T). This is a replacement Arrma Kraton EXB 43T Spiral Cut Main Diff Gear. This is a replacement for the Kraton 6S EXB model, but can be used with the standard 6S BLX Kraton, Mojave, Notorious, Outcast, and Talion kits as an optional upgrade. NOTE: Must be used with ARA310979 - MAIN INPUT GEAR 10T SPIRAL CUT GP4 5mm. Requires 29mm diff case differentials (ARA310983 or ARA311061). Features: Machined from tough steel for long-lasting durability and consistent performance Spiral-cut, wide tooth profile increases torque handling capabilities Precision manufactured gear teeth for smooth operation in extreme RC conditions GP4 configuration to be used with GP4 Main Input Gear Fits on 29mm Diff Case This product was added to our catalog on August 13, 2021
$22.99
RPM ARA311073, 11T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
ARA311073, 11T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
$7.99
RPM ARA311076, Arrma CNC Steel Mod 0.8 Pinion Gear (1/8" Bore) (14T)
ARA311076, Arrma CNC Steel Mod 0.8 Pinion Gear (1/8" Bore) (14T) This is an Arrma CNC Steel Mod 0.8 Pinion Gear intended for use with the Infraction 4WD MEGA Truck. This pinion uses a 1/8" bore and is a Mod 0.8 gear pitch. Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision CNC machined Wide tooth profile for smooth operation Suits 1/8" (3.175mm) motor shaft diameter Laser etched with tooth count for easy identification Precision manufactured threaded set-screw hole 4x4mm set screw included Includes: (1) 0.8 Mod Pinion Gear (1) Set Screw (4x4mm)
$6.99
RPM ARA311078, Arrma CNC Steel Mod 0.8 Pinion Gear (1/8" Bore) (16T)
ARA311078, Arrma CNC Steel Mod 0.8 Pinion Gear (1/8" Bore) (16T) This is an Arrma CNC Steel Mod 0.8 Pinion Gear intended for use with the Infraction 4WD MEGA Truck. This pinion uses a 1/8" bore and is a Mod 0.8 gear pitch. Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision CNC machined Wide tooth profile for smooth operation Suits 1/8" (3.175mm) motor shaft diameter Laser etched with tooth count for easy identification Precision manufactured threaded set-screw hole 4x4mm set screw included Includes: (1) 0.8 Mod Pinion Gear (1) Set Screw (4x4mm)
$8.99
RPM ARA311080, 18T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
ARA311080, 18T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
$9.99
RPM ARA311084, 22T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
ARA311084, 22T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
$11.99
RPM ARA311085,23T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
ARA311085,23T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
$11.99
RPM ARA311086, 24T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
ARA311086, 24T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
$11.99
RPM ARA311087, 25T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
ARA311087, 25T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
$11.99
RPM ARA311088, 26T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
ARA311088, 26T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
$11.99
RPM ARA311089, 7T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
ARA311089, 7T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
$13.99
RPM ARA311090, 28T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
ARA311090, 28T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
$13.99
RPM ARA311091, 29T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
ARA311091, 29T 0.8Mod 1/8" Bore CNC Steel Pinion Gear
$13.99
ARRMA ARA320573, Arrma Kraton EXB Super Basher Front Bumper
ARA320573, Arrma Kraton EXB Super Basher Front Bumper The Arrma Kraton EXB Super Basher Front Bumper is a replacement for the Kraton 6S EXB model, but can be used with the 6S BLX Kraton, Outcast, Talion and Notorious models as an optional upgrade. This bumper increases the front end protection on the ARRMA 6S family of models, allowing you to go bigger than you ever have before! Features: Precision molded from tough and durable composite material Wide front bumper protects the front of the vehicle, including shock absorbers, from impacts Molded composite bumper spring enhances the impact absorbing capabilities Accurately molded mounting holes enable fast and efficient servicing of your vehicle Includes: (1) Super Basher Front Bumper (1) Super Basher Front Bumper Spring (1) Super Basher Front Bumper Mount This product was added to our catalog on July 30, 2021
$19.99
ARRMA ARA330590, Rear Lower Suspension Arms (1 Pair)
ARA330590, Rear Lower Suspension Arms (1 Pair) OVERVIEW: These Rear Lower Suspension Arms are the perfect replacement part for your kit items. FEATURES: Tough composite material for increased crash resistance and long-lasting durability - Precision molded hinge pin holes for smooth slop-free suspension action - Sway Bar mounting holes for a wide selection of handling options INCLUDES: 1 x Rear Suspension Arm - Left 1 x Rear Suspension Arm - Right RPM80812 - Rear A-arms for the ARRMA Kraton 8S & Outcast 8S
$25.99
Integy ARA330764, Shock Set 16mm Bore, 110mm Length, 2000cSt Oil
ARA330764, Shock Set 16mm Bore, 110mm Length, 2000cSt Oil This Shock Set provides a pair of assembled shock absorbers filled with high-quality silicone shock oil for fast and efficient shock replacement on your vehicle. INCLUDES 2 x Assembled Shock Absorbers 4 x Blank Tuning Pistons 2 x 8 x 1.4mm Hole Tuning Piston 2 x 8 x 1.3mm Hole Tuning Piston 4 x Sway Bar Pivot Balls FEATURES High-quality anodized aluminum shock bodies, shock caps, shock seal caps and preload adjusters - Strong 4mm stainless steel shock shafts for long-lasting durability - Tough composite shock rod ends and spring retainers - Supplied assembled - Ready to bolt on to your vehicle after fitting your choice of spring - Shock boots included for shock shaft protection - Additional tuning pistons supplied SPECIFICATION: Length: 110mm (center to center) Internal Bore Diameter: 16mm Included Shock Oil: 2000cSt Silicone Shock Oil Piston: 1.2mm x 8 hole pistons This item was added to our catalog March 4, 2022
$69.99
ARRMA ARA409008, Arrma KRATON 8S Finished Body (Black)
ARA409008, Arrma KRATON 8S Finished Body (Black) This product was added to our catalog on March 24, 2021
$123.19
ARRMA ARAC5060, AR310498, Arrma Spiral Cut Input Gear (10T)
ARAC5060, AR310498, Arrma Spiral Cut Input Gear (10T) This is a replacement Arrma 10 Tooth Spiral Cut Input Gear. This product was added to our catalog on December 11, 2021
$15.99
Hot Racing HRAAON48SH25, Hot Racing Arrma Kraton/Outcast Aluminum Fixed Link Steering w/25T Servo Arm
HRAAON48SH25, Hot Racing Arrma Kraton/Outcast Aluminum Fixed Link Steering w/25T Servo ArmThis product was added to our catalog on December 16, 2021
$18.99
Hot Racing HRATFF288RC, Hot Racing Arrma 4S BLX Long CV Front/Rear Driveshafts (2)
HRATFF288RC, Hot Racing Arrma 4S BLX Long CV Front/Rear Driveshafts (2) Features: Replaces stock diff outdrives and factory plastic drive axles CNC machined and hardened S2 spring steel wheel axle stubs CNC machined and hardened #45 steel outdrives, drive hubs, and slider spline Hard anodized black aluminum 85mm slider Red anodized aluminum pin capture rings with rubber o-rings to prevent movement Rubber dust boot to retain lubrication and help protect slider against elements Fits KRATON 4X4 4S BLX (ARA102690) and OUTCAST 4X4 4S BLX (ARA102692) front or rear Replaces stock Arrma AR310775 diff outdrives and AR310887 front shafts, or AR310888 rear shafts Includes: (2) CVD shaft assemblies (2) CNC steel Output diff gear (2) M4x2.5x11mm screw shafts This product was added to our catalog on May 16, 2021
$69.99
Integy INTC28728SILVER, Wing Mount - ARA 1/8 Kraton 6S BLX
INTC28728SILVER, Wing Mount - ARA 1/8 Kraton 6S BLX
$35.99
Jetko Tires JKO5801CBMSGBB2, 1/5 XMT Tomahawk Tires Mounted on Black Claw Rims, Medium Soft, Belted, 24mm for Arrma (Kraton 8s & 24mm for traxxas X-Maxx
JKO5801CBMSGBB21/5 XMT Tomahawk Tires Mounted on Black Claw Rims, Medium Soft, Belted, 24mm for Arrma (Kraton 8s & 24mm for traxxas X-Maxx24mm for Arrma (Kraton 8s & Outcast 8s) This product was added to our catalog on 01/04/2022
$92.76
Pro-Line PRO1015510, Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels
PRO1015510, Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels Pro-Line Trencher HP Belted 3.8" Pre-Mounted Truck Tires feature a High-Performance herringbone weave pattern belt, molded inside the relentless, tall and grippy tread of the Trencher HP tire. These are not your average belted tires! Made for All Terrain bashing, the Trencher HP 3.8" tires will not balloon or expand during use and will still provide the incredible grip that you expect from Pro-Line tires due to the soft M2 compound. Just like all Pro-Line's tires, they are proudly Made in the USA! Like the original Trencher X 3.8" tire, the next generation Trencher HP 3.8" is destined to become the ultimate, go-to Bash tire for your truck! Please note that the Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 3,500 RPM under ideal conditions in testing. Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. The Belted Trencher HP 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Features: Tires: Molded-in High-Performance Herringbone Weave Pattern Belt Trencher HP Tire Will Not Balloon or Expand at High Speed Horizontal H Shaped Tread for Ridiculous Amounts of Traction and Stability Over-sized Tall Tread is Second-to-none in Durability and Longevity Perfect for 3.8" Monster Trucks Extremely Detailed Sidewall Design for that Tough Off-Road Look Optimum Handling, Durability and Longevity Made in the Legendary M2 Compound Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheels: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 6.70" (170mm) Width: 4.15" (105mm) Includes: (2) Pre-Mounted Trencher HP 3.8" Belted Tires on Raid Black 8x32 Removable Hex Wheels (2) 8x32 to 17mm 1/2" Offset Hex Adapters (16) M3 x 12mm long SHCS hardware This product was added to our catalog on August 20, 2021
$74.99
RPM RPM80742, Rear A-Arm ARRMA Kraton/Outcast 4s BLX
RPM80742, Rear A-Arm ARRMA Kraton/Outcast 4s BLX RPM80742, RPM 4S Kraton/Outcast Rear Suspension Arm Set (2) This product was added to our catalog on December 16, 2021
$13.95
RPM RPM80812, RPM Arrma Kraton 8S Rear Suspension Arms (2)
RPM80812, RPM Arrma Kraton 8S Rear Suspension Arms (2) RPM Arrma Kraton 8S Rear Suspension Arms are a heavy duty upgrade for the Arrma Kraton 8S & Outcast 8S models. These 26 lbs, high-flying, dirt shredding, jump-killing machines are true monsters. If your A-arms aren’t up to the abuse this massive rig can dish out, look no further than RPM. These replacement rear A-arms are designed with the backyard basher in mind and can handle some serious abuse and come back for more. RPM rear A-arms have a triple beam style construction designed to spread impact energy across all three beams. Each beam’s cross-section is a whopping 5/8” (15.8mm) tall x 3/8” (9.5mm) wide. These massive beams reduce unwanted flex during normal suspension movement, yet allow impact-absorption during those not-so-perfect landings and crashes. RPM also moved the inner cross brace away from the chassis, eliminating the droop stop entirely. While this may seem counter-intuitive, the RPM test truck chassis was bent at the droop stops, clearly illustrating that extreme impacts were too much for the chassis plate to handle. After all, there’s nothing worse than a bent chassis. Made in the USA from RPM's trademark blend of ultra durable materials, you can’t go wrong with RPM! Tech Notes: RPM Rear A-arms for the ARRMA Kraton 8S are sold as a pair. RPM A-arms replace stock ARRMA ARA330590. Features: Sold in pairs Replaces stock ARRMA ARA330590 Optional Mud Guards also available (RPM80642) This product was added to our catalog on March 20, 2021
$27.95
RPM RPM80822, Front A-Arms ARRMA Kraton/Outcast 4s BLX
RPM80822, RPM 4S Kraton/Outcast Front Suspension Arm Set This product was added to our catalog on December 16, 2021
$12.95
RPM RPM81402, Rear A-Arms: ARRMA Kraton, Talion & Outcast
RPM81402, Rear A-Arms: ARRMA Kraton, Talion & Outcast RPM81402, RPM ARRMA Kraton/Outcast Rear A-Arms (Black) This product was added to our catalog on December 16, 2021
$13.95
RPM RPM81412, Mud Guards :Kraton, Talion & Outcast Rear A-Arms
RPM81412, Mud Guards :Kraton, Talion & Outcast Rear A-Arms
$6.95
RPM RPM81442 - Rear Skid Plate : ARRMA Kraton, Talion
RPM81442 - Rear Skid Plate : ARRMA Kraton, Talion
$8.95
RPM RPM81492, RPM Arrma 4x4 Front Suspension Arm Set (Black), Big Rock, Senton, Granite
RPM81492, RPM Arrma 4x4 Front Suspension Arm Set (Black), Big Rock, Senton, Granite Fits: Arrma Granite 3S BLX Arrma Granite 4x4 Mega Arrma Senton 3S BLX The RPM Arrma 4x4 Front Suspension Arm Set offers increased adjustability and improved durability in a lightweight package. Adjustability: RPM added a second shock mount to both the front and rear A-arms to the outside of the stock shock mount, adding adjustability and improving trackability. This outer shock mount lowers the ride height, increasing stability on all surface types. A lower ride height also means faster corner speeds. Durability: Molded from RPM's trademark blend of indestructible, engineering grade nylons, you can’t get much tougher! RPM also redesigned the shape of the A-arms while retaining stock suspension geometry to help improve survivability for those “oops” moments. Lightweight: With RPM's stronger materials and improved designs, they are able to cut out unnecessary weight while still offering suspension components that are unparalleled in performance and durability. Features: Fits 3s BLX 4×4 versions of the Big Rock, Granite & Senton Exclusive 2nd shock mount hole for added adjustability Replaces stock AR330443 NOTE: RPM A-arms fit the following ARRMA vehicles; Big Rock 4×4 (#AR102711), Senton 4×4 (#AR102668, #AR102667 & #AR102678) & Granite 4×4 (#AR102665, #AR102666 & #AR102676). RPM Front A-arms replace ARRMA #AR330443. This product was added to our catalog on December 16, 2021
$11.95
RPM RPM81522, ARRMA Kraton 8S Lft Upper & Lower A-arms
RPM81522, ARRMA Kraton 8S Lft Upper & Lower A-arms This is an optional set of Arrma 8S BLX Front Left Upper and Lower Suspension Arms, intended for use with the ARRMA Kraton 8S & Outcast 8S kits. The ARRMA Kraton 8S and Outcast 8S are each 26 lbs. (12kg.) of RC bashing fun. That's alot of weight to throw around, and if the A-arms aren’t up to the abuse these massive monsters can dish out then RPM has got your back! These replacement front A-arms are designed with the backyard basher in mind and can handle some serious abuse and come back for more. Features: Lighter than stock by 4.5 grams per upper / lower a-arm pair Replaces the front left upper A-arm from stock ARRMA #ARA330561 Replaces the front left lower A-arm from stock ARRMA #ARA330589 (One vehicle will require 1 – #81522 & 1 – #81562 for completion of the front end) Notes: RPM A-arms for the ARRMA Kraton 8S & Outcast 8S are sold as one upper and one lower in each kit. One left (#81522) & one right (#81562) will be needed to complete the front end of one vehicle. RPM A-arms replace the upper A-arms from stock ARRMA #ARA330561 and the lower A-arms from stock #ARA330589. Like stock A-arms, RPM Kraton 8S versions are sold without threads. If the pivot ball hole is difficult to thread using the pivot ball, RPM recommends thread tapping (tap not included) the hole for 3 – 4 threads, but do not tap any further. Additional cut threads will negate the thread-locking capability of our materials This item was added to our catalog March 3, 2022
$27.95
RPM RPM81642, Wing Mounts :ARRMA Kraton, Talion
RPM81642, Wing Mounts :ARRMA Kraton, Talion
$16.95
Fast Eddy Bearings TFE6047, FastEddy Arrma 1/5 Kraton 8S BLX Sealed Bearing Kit
TFE6047, FastEddy Arrma 1/5 Kraton 8S BLX Sealed Bearing Kit (4) 6x10x3 (1) 6x12x4 (1) 6x16x5 (2) 8x16x5 (10) 12x24x6 (4) 15x26x7 (4) 17x26x5 You are purchasing the bearings listed above. This product was added to our catalog on September 2, 2021
$30.99
Fast Eddy Bearings TFE6949, FastEddy Arrma 1/5 Kraton EXB Extreme Bash Sealed Bearing Kit
TFE6949, FastEddy Arrma 1/5 Kraton EXB Extreme Bash Sealed Bearing Kit (4) 6x10x3 (1) 6x12x4 (1) 6x16x5 (2) 8x16x5 (10) 12x24x6 (4) 15x26x7 (4) 17x26x5 This product was added to our catalog on May 13, 2021
$30.99