All batteries must be shipped by a ground shipping method. Cetus X Brushless Quadcopter is a 2S power whoop drone and a primary choice for beginners who want to get advanced flight skills. It features a stronger propulsion system for a speedier and more violent flight, which is capable of performing diverse freestyle tricks. Equipped with M04 400mW VTX and C04 FPV camera that is optimized for longer radio and video transmission. Meanwhile, it supports the Betaflight configurator which is a popular application to configure RC aircraft. Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features An excellent preference for beginners to get advanced level. Cetus X brushless Quadcopter is proud of its lightning speed with rapid startup due to its stronger propulsion system. Build-in ExpressLRS 2.4G receiver that is the most popular radio link, low latency, and far controlling range are possible. Pilots can not only enjoy the flight indoors but also explore the scenery outdoor. Featuring M04 400mW VTX, C04 FPV camera (based on Caddx Nano Ant Camera or Runcam Nano 4), and 2xBT2.0 450mAh 1S 30C battery for longer radio and video transmission and flight endurance, Cetus X brushless quadcopter allows beginners to gain more achievements in FPV flight. Classical white design inherited from Cetus Series and made of PA12 material, Cetus X frame has an excellent impact resistance in drop & impact. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots. Specifications Item: Cetus X Brushless Quadcopter Weight: 55g Wheelbase: 95mm FC: F4 1S 12A FC V2.2 (ELRS 2.4G) Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4) Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G VTX: M04 25-400mW VTX Battery: 2*BT2.0 450mAh 1S 30C Battery Flight time: 5 mins Downloads FC Firmware and ESC download   Includes 1 x Cetus X Brushless Quadcopter 1 x BT2.0 Battery Charger and Voltage Tester 2 x BT2.0 450mAh 1S 30C Battery 1 x Phillips Screwdriver 1 x Prop Removal Tool 1 x Type-C Adapter 4 x Gemfan 2020 4-Blades Props  

Read more less

Based on the F405 2-4S 20A Flight Controller V4, the F405 4S 20A Toothpick Flight Controller V5 applies a new ICM42688 gyro and ESC chip that comes with BLUEJAY ESC firmware so it supports bidirectional D-shot. In addition to plug-and-play ports for the receiver and HD Digitial VTX, the same as the V4 board, the V5 board is made with a more rational layout for easy solder and preventing solder from jumping to another pad and shorting components.  Check out all our whoop flight controllers, and all our BetaFPV gear!   Features Not only is the flight controller board made with a rational layout, but it is also designed with larger solder pads. It is very easy for pilots to solder external electronics. The flight controller is capable of handling 20A continuous current and reaching 25A peak current due to high-quality MOSFETs. Soldering motor wires to the pad directly allows lower resistance for more current on motors. Besides, solder pads are reinforced by thick copper and edge plating processes, ensuring a solid value and durable use. Reserving the UART ports layout, UART3 for RX, UART4 for HD digital VTX, UART6 for Analog VTX, and UART1 for spare use, it is more convenient for pilots to solder. This board comes with a 25.5x25.5mm whoop mounting pattern; this board can be added to both the toothpick drone and the cinematic whoop quadcopter  Note: F405 4S 20A FC V5 is available to flash both BLHeli_S and BLUEJAY ESC firmware and it comes with default BLUEJAY firmware. The main difference is that the BLUEJAY firmware supports bidirectional D-shot, while BLHeli_S does not support it.    Comparison to F405 2-4S 20A V4 FC We upgraded the F405 2-4S 20A V4 board to V5 by adopting ICM42688 gyro instead of MPU6000 and adding some new features. ICM42688 gyro works great in most cases. Except for the gyro, the V5 board comes with a completely new ESC firmware that supports bidirectional D-shot. The way to connect motors changed and is solderable only on the V5 board. Besides the V5 FC board features high-quality material for stability and durability. The below pictures show the difference between the two flight controllers. Note: The F405 2-4S 20A Flight Controller V4 with BMI270 gyro will be available for purchase for a period of time. Diagram for Toothpick F405 20A AIO FC V5 The board integrates 2 LEDs, including the Power LED (Red) and the FC LED (Blue).  LED Status Description Power LED (Red) Solid Power on FC LED (Blue) Solid Motor Armed Connecting External RX/HD Digital VTX F405 4S 20A FC V5 integrates the Plug & Play port for the external RX and HD digital VTX, and there will be a 4-pin connector for RX and a 6-pin connector for HD digital VTX in the package. Thus, we highly recommend pilots use the port to save the solder work. FC & ESC Firmware: The default firmware is including CLI dump file. But if you flash firmware from the Betaflight configurator official site, please flash a CLI dump file for F405 4S 20A FC V5. We offer the default firmware and CLI dump file to download. Download the FC default firmware betaflight_4.3.1_BETAFPVF405 and CLI dump file. F405 4S 20A FC V5 is available to flash both BLHeli_S and BLUEJAY ESC firmware and it comes with default BLUEJAY firmware. The main difference is that the BLUEJAY firmware supports bidirectional D-shot, while BLHeli_S does not support it. Here are the download links for two firmware. Here are the download links for ESC firmware. Please configure the BLUEJAY firmware through ESC - Configurator or Bluejay Configurator software. Download the BLUEJAY ESC firmware Download the ESC - Configurator Download the Bluejay Configurator We offer BLHeli_S ESC firmware for pilots. Please configure the BLHeli_S ESC firmware through BLheliSuite, BLHeli - Configurator, or ESC - Configurator software. Download the BLHeli_S ESC firmware Download the BLHeliSuite16714902a  Download the BLHeli - Configurator Download the ESC - Configurator frame like Pavo25 and X-knight 35. Specifications: Flight Controller CPU: STM32F405RGT6 Six-Axis: ICM42688 (SPI connection) Mounting Size: 25.5x25.5mm (M2 Anti-vibration rubber damper available) FC Firmware: betaflight_4.3.1_BETAFPVF405 OSD: Built-in Betaflight OSD (OSD chip: AT7456E) Receiver: SBUS/CRSF/DSMX Receiver BEC: 5V 3A Built-in current sensor Weight: 8.35g ESC ESC Chip: SILABS EFM8BB21F16G-C Support D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM Input voltage: 2S-4S Lipo Continuous current: 20A Peak current: 25A Firmware: G_H_20_48_v0.16.HEX (Default BLUEJAY), BLHeli_S (Optional) Includes 1x BetaFPV F405 V5 2-4S AIO Whoop/Toothpick Flight Controller (w/ 20A 8Bit 4in1 ESC) - ICM42688 1x Cable Pigtail (XT30) 1x 6-Pin Connector for Digital VTX 1x4-Pin Connector for RX 4x M2x12 Screws 8x M2 Nuts  4x M2 Anti-vibration Rubber Dampers

Read more less

M03 VTX, an ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer-range flying. Check out all our Micro/Nano VTXs and all our BetaFPV gear! Features With the 25-350mW output power, the M03 VTX provides a stable image and strong transmission. Only 1.1g and a tiny size for drones like 65-85mm whoop drones. The screw mounting holes pattern is suitable with BETAFPV micro canopy. The camera connector JST-0.8 is suitable for the BETAFPV C02 camera. Comes with IPX type of antenna, just plug and play, no extra solder work needed.  M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend using it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G). Diagram Below is the diagram of the M03 VTX. The camera connector is JST-0.8 and it is compatible with cameras like BETAFPV C01, BETAFPV C02, and NewBeeDrone BeeEye. How to connect with the Flight Controller Here is the diagram about how to connect the M03 VTX with F4 1S 5A FC (ELRS 2.4G) board. Here is the diagram about how to connect the M03 VTX with F4 1S 12A FC (ELRS 2.4G) board. Change Band & Band & Chnanel & Power M03 VTX could only use the Smart Audio port to change the band and channel.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -> VTX SA to change the frequency point and power. Switchable power includes 25mW, 100mW, 200mW and 350mW. Except for the method via OSD menu as show above, the output power could be changed via the power button. Specifications Item: M03 5.8G VTX Output power: 25/100/200/350mW (adjustable) Supply voltage range: 4.5-5.5V Weight: 1.1g (antenna not included) VTX internal size: 18X14mm Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz Channel SEL: SmartAudio Modulation type: FM Frequency control: PLL All harmonic: Max -50dBm Frequency stability: ±100KHz (Typ.) Frequency precision: ±200KHz (Typ.) Channel carrier error: ±1.5dB Antenna port: 50 Ω Operating temperature: -10℃~+80℃ Camera connector: JST-0.8, compatible with cameras like BETAFPV C01, BETAFPV C02 and NewBeeDrone BeeEye. Includes 1x BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL 5x 30AWG silicone wire (30mm)

Read more less

To elevate the flying experience, DIY enthusiasts have consistently prioritized the reduction of weight for the attainment of ultra-light structure for 1S whoop drones. Consequently, we have devised an exceedingly light Micro Air Canopy, weighing a mere 0.74g, that not only facilitates camera angle adjustment from 25° to 50° but also has antenna mounts, incorporated at the tail. If your goal is to optimize canopy functionality while minimizing weight to obtain a Sub18g 65mm Whoop, this option stands as the definitive choice. Check out all our whoop frames & accessories and our BetaFPV gear! Features With a mere weight of 0.74g, the canopy boasts a simplistic yet durable structure, ensuring effortless installation. It stands as the premier pick for ultra-light small whoop drones.  This hollow-out design reshape the installation space and accommodates an assortment of Micro and Nano-sized Analog and HD Digital cameras that are widely sought after in the market. Positioned at the canopy's tail, reserved 4 antenna mounts enable seamless adjustment of the camera angle, offering a versatile range spanning from 25° to 50°, capturing the optimal image. More Compatibility Micro Air Canopy is the ideal option for constructing or enhancing ultra-light whoop drones featuring HD Digital VTX or Analog VTX, owing to its exceptional compatibility. This hollow-out design reshape the installation space and accommodates an assortment of Micro and Nano Analog and HD Digital cameras. So Micro Air Canopy provides full support for the C03 Camera, C02 Camera, Avatar HD Lite Camera, ANT Lite Camera, and other cameras possessing a lens diameter of 9-10mm. Infinite Personalization We provide diverse color options for the Micro Air Canopy, enabling greater freedom for personality. This allows for aligning or color clashing the canopy color with your drone's theme. And equipped with our various colors of Meteor65 Air Brushless Whoop Frame adds flexibility, and agility during flight. Your drone will capture people's attention and showcase your unique personality and creativity.   Specifications Item: Micro Air Canopy Material: PP Tilt: 25°~50° (Adjustable) Weight: 0.74g (Including one Camera Fixed Screw) Color: Black, White, Transparent White, Transparent Blue, Transparent Purple, Transparent Green  Includes 1x BetaFPV Micro Air Whoop Canopy - Choose Your Color

Read more less

This micro canopy is specially designed for Walksnail Avatar Nano camera, Runcam Nano Lite Camera, or most 14mm nano cameras, supporting an adjustable camera lens of 0-45°. It features high compatibility for both HD Digital VTX and Analog VTX like M03 Analog VTX. Features The canopy is designed with camera mounting holes for an adjustable camera lens of 0-45°. It is suitable for Walksnail Avatar Nano camera, Runcam Nano Lite Camera, or most 14mm nano cameras. Lightweight and two colors for options (Black/Blue). Using it with Meteor Series colorful frame will be more attractive. Recommend frames for Meteor65 Pro, Meteor75, and Meteor85 Adopt with injection molding technique, this canopy is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone. Unique design with three decorative parts like a knight, the drone flies in the air like a scientific spaceship cruising, making it very cool and special. Also, the decorative parts are detachable for better heat dissipation. Mounting Diagram The picture below is the diagram for this canopy. This canopy is applied to 1S Walksnail Avatar Mini HD VTX, HDZero Whoop Lite Bundle, M03 Analog VTX, or most 14mm nano cameras. Other brands' VTXs with similar sizes are available to be mounted on this canopy.  Specification Item: Micro Canopy for HD Camera Material: PP Tilt:  0-45° Weight: 2.50g (without decorations), 3.28g (with decorations) Color: Black/Blue Adapted VTX: 1S Walksnail Avatar Mini HD VTX, HDZero Whoop Lite Bundle, M03 25-350mW 5.8G VTX Adapted FPV Camera: Walksnail Avatar Nano Camera, Runcam Nano Lite Camera, or most 14mm nano cameras Adapted Frame: Meteor65 Pro/Meteor75/Meteor85 Includes 1x Micro Canopy for HD Camera (Black/Blue) 3x Decorative Parts 3x M1.4x3 Screws 8x M1.4x5 Screws 3x M2x4 Screws Note: The decorative parts for both Micro Canopy for HD Camera and Canopy for Micro Camera 2022 are unavailable in common use even though they have a similar appearance.

Read more less

All batteries must be shipped by a ground shipping method. Brush up on your FPV skills with the BetaFPV RTF Cetus FPV Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case. You have everything needed to get into FPV, including the LiteRadio 2 SE Transmitter, VR02 FPV Goggles, and the Cetus Whoop. Easy to carry on and ready to fly. What are you waiting for? Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 300mAh - BT2.0 Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features 3 Flight modes Altitude hold and emergency landing functions Storage case FrSky D8 protocol drone and radio Brushed drone, easy to fly Specifications Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 Flight controller: Lite 1S Pro brushed FC VTX: 25mW Camera tilt degree: 25° Camera: C01 FPV Micro Camera Transmitter: Literadio2 SE Transmitter TX mode: Mode 2 (Left stick throttle) Goggles: VR02 Goggles Motor: 716-19000KV Brushed motor Propeller: 31mm 4-blade 0.8mm shaft hole Takeoff weight: 35g(with battery) Power system: 1S Battery: BT2.0 300mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (Clear line of site) Includes 1x Cetus Brushed Quadcopter                              1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)                         1x VR02 FPV Goggles    2x BT2.0 300mAh 1S Lipo Battery      1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C Adapter 1x Prop Removal Tool 4x 31mm 4-Blade Props 1x Portable Storage Bag User Manual

Read more less

All batteries must be shipped by a ground shipping method. The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles. It's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor. Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 450mAh - BT2.0 Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features The auxiliary flight function is greatly reducing the threshold of operating. This is the lightest key to open the door to advanced FPV. Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. Pilots can achieve more FPV freestyle actions to train. With the self-protection of emergency landing when out of control or in low battery, to ensure a more safe flight. Made of PA12 material, the frame has an excellent impact resistance in drop & impact. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors. All items needed for the flight are packed in an EVA portable storage bag. Better to protect and convenient to carry. Specifications BetaFPV LiteRadio 2 Frequency Range: 2.4GHz (2403MHz-2447MHz) 2.4G System: NRF24L01 or CC2500 Channel: 8 Support Protocol: Bayang / Futaba S-FHSS / Frsky D16 FCC/ Frsky D16 LBT/ Frsky D8 Power: ≤100mw Adapted Drone Type: Multirotor Support USB Charging / Firmware Update Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration LED Light: Green-Power On / Red-Warning / Blue-Normal Battery: Built-in 1000mAh 1S Battery Charging Connector: Type-C BetaFPV VR02 Goggles Screen Size: 4.3" Screen Resolution: 800x480p Screen Brightness: 300cd/m2 Field of View: 55° Charging Port: USB-C Input Voltage: 3.7V 500mA Internal Battery: 3.7V 2000mAH Dimensions: 143x126x86.3mm Weight: 300g BetaFPV RTF Cetus Pro Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 VTX: 25mW Camera tilt degree: 25° Camera: C02 FPV Micro Camera Propeller: 40mm 3-blade 1.5mm shaft hole Power system: 1S Battery: BT2.0 450mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (Clear line of site) Includes 1x Cetus Pro Brushless Quadcopter                              1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)                         1x VR02 FPV Goggles    2x BT2.0 450mAh 1S Lipo Battery      1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C Adapter 1x Prop Removal Tool 1x Portable Storage Bag

Read more less

All batteries must be shipped by a ground shipping method.  Whether you're a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level of flying FPV. Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 300mAh - BT2.0 Check out our other RTF combos, all our pre-built quads, and our BetaFPV selection! Features Nothing quite beats the experience of flying Cetus X with an enhanced propulsion system, and longer radio and video transmission. With a very functional and potential remote controller and FPV goggles, pilots can unlock more accomplishments to the next level. Two FC versions are offered for pilots. With the support of the Betaflight configurator, beginners can learn quadcopter configuration through the Betaflight FC version. For pilots who prefer the classical Cetus, the Cetus FC version with an altitude hold function is also coming soon. Classical white design inherited from Cetus Series and made of PA12 material, the Cetus X frame has an excellent impact resistance in drop & impact and reduces the risk of damage, giving you more peace of mind. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots. LiteRadio 3 reserves a nano bay that supports the external TX module for the compatibility of more quadcopters. And the VR03 FPV goggles which are newly added a Micro SD card slot to save the video with DVR recording, support most Analog VTXs in the market. The quadcopter, radio transmitter, FPV goggles, and all of the accessories are packed in an EVA portable storage bag. It is convenient to carry outside and better to protect the equipment. Powerful Propulsion System Equipped with 1103 11000KV Brushless Motors and Gemfan 2020 4-blade props, the Cetus X Brushless Quadcopter delivers powerful propulsion, making it a 2S power whoop drone with some real punch to it. The whole quadcopter is light and durable enough, offering pilots a high-efficiency flight experience. Recording Every Flight Moment Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience. Improved Video Transmission Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. M04 25-450mW VTX features a lightweight and adjustable output power for long-distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, the C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with the C02 FPV camera. LiteRadio 3 Radio Transmitter This transmitter features an ergonomically designed handle and has superb performance in its working time, a newly updated gimbal. Besides, this version supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller. Experience the thrill of total immersion with unrivaled control and capture the world around you. FPV Simulator Supported First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time. Check out the Liftoff flying demonstration here. Download Liftoff here. Various Modes, Accessible to All Cetus X supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate turtle mode by LiteRadio 3 transmitter to flip it over and resume flying. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus X FPV Kit helps anyone fly confidently from day one. BETAFPV Cetus Series The BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, Cetus Series always satisfies customers' needs no matter new beginners or seasoned pilots. Specification Item: Cetus X FPV Kit Weight: 55g Wheelbase: 95mm FC: F4 1S 12A FC Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4) Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G (Betaflight)/Frsky D8 (Cetus) VTX: M04 25-400mW VTX Quadcopter: Cetus X Brushless Quadcopter Transmitter: LiteRadio 3 Radio Transmitter Goggles: VR03 FPV Goggles Battery: 2x BT2.0 450mAh 1S 30C Battery Flight time: 5 mins Includes 1x Cetus X Brushless Quadcopter (Betaflight Firmware, ELRS 2.4G Receiver) 1x LiteRadio 3 Transmitter (ELRS 2.4G) 1x BETAFPV VR03 FPV Goggles  4x BT2.0 450 mAh 1S Lipo Battery  1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C to FC Adapter 1x Prop Removal Tool 4x Gemfan 2020 4-Blades Prop (Spare Set) 1x Portable Storage Bag FAQ For more info and instructions, please check the User Manual for Cetus X FPV Kit. Please DO NOT configure ESC or Motor settings on the Betaflight configurator. The VR03 FPV goggles do not include a Micro SD card. You should prepare it before using the DVR recording function. The External TX module for LiteRadio 3 should be bought separately. Recommend BETAFPV Nano TX Module.

Read more less

BFPV-00313881, BetaFPV Cetus FPV RTF Drone Combo Kit The Cetus FPV Kit offers an exceptional opportunity for FPV beginners to explore the thrilling world of First-Person-View flying. This all-inclusive kit, comprising the Cetus brushed quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, brings everything you need for an immersive FPV experience. The auxiliary flight function makes it a breeze for everyone to take to the skies, greatly reducing the learning curve for newcomers. With three distinct flight modes Normal, Sport, and Manual, with three speed settings, the Cetus FPV Kit can cater to a wide range of pilot preferences and flight environments. The Cetus quadcopter features an altitude hold function that simplifies flying and ensures stable indoor hover, thanks to an accurate barometer and laser system. Additionally, it boasts self-protection mechanisms for emergency landings and automatic motor disarming in the event of a collision. The LiteSilver system within the quadcopter integrates Frsky D8, Rx 25mW VTX, barometer, laser, and optical flow sensor for optimal performance. The LiteRadio2 SE transmitter, with its built-in 1000mAh 1S battery, offers an impressive 8-hour endurance, making it ideal for extended flight sessions. The VR02 FPV Goggles provide an immersive FPV experience, featuring high-quality antennas for clear, stable reception, ergonomic design for comfort, and simplicity of operation. The Cetus FPV Kit is the perfect entry point into FPV flying for beginners and a robust choice for enthusiasts. Features: Perfect for indoor fun 3 Flight modes Normal, Sport, and Manual Mode Self-developed LiteSilver System Self-protection Function Auto hold hovering Durable PA12 Frame Impressive 4-5 minute flight times Low voltage protection Automatic calibration makes preflight a breeze Small and convenient FPV supported Specifications: Weight: 1.23oz (35g) Protocol: Frsky D8 Flight Controller: Cetus FC V3.0 VTX: 25mW Camera: CO2 FPV Micro Goggles: VR02 Propeller: 31mm 4-Blade w/0.8mm Shaft Motor: 716-19000KV Brushed Motor Flight Time: 4-5 Minutes Flight Distance: 80m (interference-free environment) Assembly Level: RTF Includes: (1) Cetus FPV Kit  (1) LiteRadio2 SE Transmitter (1) VR02 FPV Goggles (1) CO2 FPV Micro Camera (2) BT2.0 3.7V 300mAh 1S Lipo Battery Charger and voltage tester (4) Spare 31mm 4-Blade props (1) Portable storage bag Needed to Complete: Everything you need is included This product was added to our catalog on October 21, 2023

Read more less

BFPV-01020005_2, BetaFPV Cetus X FPV RTF Drone Combo Kit w/BetaFPV Cetus Flight Controller The Cetus X FPV Kit is designed for both seasoned pilots and newcomers, offering an advanced 2S power whoop bundle that propels your FPV experience to new heights. Comprising the Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, it's a complete package to elevate your FPV game. With the inclusion of the latest BT2.0 450mAh 1S Battery, you'll enjoy extended flight times and higher discharge rates. This kit unlocks a new level of control and flying experience, featuring unparalleled control and extended radio and video transmission. It's a fantastic entry point for beginners to dive into the world of FPV, thanks to its accessibility and potential for growth. The Cetus X offers a variety of flight modes and speeds to suit different pilot preferences and flight environments The FPV kit combines cutting-edge components, including the Betaflight FC for powerful flight control, and The VR03 FPV Goggles are equipped with DVR recording, allowing pilots to capture and relive their most exciting moments. The Cetus X Brushless Quadcopter, combined with the advanced components in this kit, provides you with an outstanding FPV experience that's hard to match. The LiteRadio 3 SE transmitter offers fantastic versatility as it is compatible with a range of popular drone racing simulators, including Drone Racing League (DRL), DCL, Uncrashed, and Liftoff. This compatibility ensures an immersive and realistic training experience for aspiring drone racers and enthusiasts. Whether you're honing your skills or mastering the art of FPV flight, the LiteRadio 3 provides a seamless connection to these renowned simulators, making it a valuable tool for both beginners and experienced pilots. Features: Perfect for indoor fun Flight modes Normal, Sport, and Manual Mode Turtle Mode makes crash recovery a breeze Self-developed LiteSilver System Auto hold hovering Powerful 2S compatibility Tilt Camera Durable PA12 Frame Impressive 4-5 minute flight times Low voltage protection Automatic calibration makes preflight a breeze Small and convenient FPV supported LiteRadio compatible with FPV Flight simulators like DRL, DCL, Uncrashed, and Liftoff all Available on Steam Specifications: Wheelbase: 3.74in (95mm) Weight: 1.94oz (55g) Protocol: Frsky D8 Flight Controller: Cetus FC V3.0 VTX: 25-400mW M04 Camera: CO4 FPV Micro Goggles: VR03 Propeller: Gemfan 2020 4-Blades  Motor: 1103-1100KV Brushless Motors Flight Time: 4-5 Minutes Flight Distance: 80m (interference-free environment) Assembly Level: RTF Includes: (1) Cetus X FPV Kit  (1) LiteRadio 3 SE Transmitter (Frsky) (1) VR03 FPV Goggles (1) CO4 FPV Micro Camera (4) BT2.0 3.7V 450mAh 1S Lipo Battery Charger and voltage tester (4) Spare Gemfan 2020 4-Blades (1) Portable storage bag Needed to Complete: Everything you need is included This product was added to our catalog on October 21, 2023

Read more less

BFPV-01020010_5, BetaFPV Cetus Lite FPV RTF Drone Combo Kit The Cetus Lite FPV Combo is your gateway to the exciting world of FPV flying. This ready-to-fly kit is perfect for beginners, offering a safe and thrilling experience for both kids and adults. It features an auxiliary altitude hold function, making it easy for users to control and navigate. The durable frame, constructed from impact-resistant PA12 material, is equipped with a protective guard, ensuring safe flights indoors and outdoors. With the high-efficiency BT2.0 300mAh 1S battery, you can enjoy flights lasting around 4-5 minutes, and swapping batteries is a breeze. The Cetus Lite also includes a low-voltage prompt function to protect your battery. Automatic calibration simplifies your flying experience, ensuring stability every time you take off. With the Altitude Hold feature and the LiteRadio 1 transmitter, even newcomers can effortlessly control the quadcopter's height, while the included VR02 goggles provide an immersive FPV experience. The LiteRadio 1 transmitter offers fantastic versatility as it is compatible with a range of popular drone racing simulators, including Drone Racing League (DRL), DCL, Uncrashed, and Liftoff. This compatibility ensures an immersive and realistic training experience for aspiring drone racers and enthusiasts. Whether you're honing your skills or mastering the art of FPV flight, the LiteRadio 1 provides a seamless connection to these renowned simulators, making it a valuable tool for both beginners and experienced pilots. Features: Perfect for indoor fun Auto disarming upon collisions Auto hold hovering Durable PA12 Frame Impressive 4-5 minute flight times Low voltage protection Automatic calibration makes preflight a breeze Small and convenient FPV supported LiteRadio compatible with FPV Flight simulators like DRL, DCL, Uncrashed, and Liftoff all Available on Steam Specifications: Length: 3.5in (90mm) Width: 3.3in (85mm) Height: 1.7in (45mm) Weight: 1.26oz (36g) Protocol: Frsky D8 Flight Controller: Cetus FC V3.0 VTX: 25mW Propeller: 31mm 4-Blade w/0.8mm Shaft Motor: 716-19000KV Brushed Motor Flight Time: 4-5 Minutes Flight Distance: 80m (interference-free environment) Assembly Level: RTF Includes: (1) Cetus Lite (1) LiteRadio Transmitter (1) VR02 FPV Goggles (1) Cetus Lite Camera and VTX (2) BT2.0 3.7V 300mAh Lipo Battery Charger and voltage tester (4) Spare 31mm 4-Blade props (1) Spare 716 CCW Motor (1) Spare 716 CW Motor Needed to Complete: Nothing! Everything needed for lift off is included This product was added to our catalog on October 21, 2023

Read more less

The props for this BNF press fit on and do not screw into the motor (much like many other Whoops & Toothpicks) The Darwin Baby Ape has been loved by many pilots as soon as it was published. In order to design a better FPV drone, DarwinFPV upgraded the Baby Ape based on the pilots' feedback and launched the BabyApe Pro V2. Darwin made several upgrades to the frame. First of all, nylon standoffs are upgraded to aluminum alloy standoffs, which strengthens the frame and stables structure. Second, they added the receiver fixing bracket. Third, they upgraded the arms. The arms are upgraded from 4 individual arms (2.5mm thickness) to 2 integrated arms (3.0mm thickness). It is easier to disassemble, sturdy, and durable. Lastly, the V2 version only needs 4 screws to fix, and the arm can be replaced by removing 2 screws without removing the whole drone. Make sure to check out all of our BNF quads as well as the rest of our DarwinFPV selection! Specifications Motors Input Voltage: 2-3S Stator Size: 11x4mm Kv: 4300 AIO MCU: STM32F411 Gyro: MPU6000 BEC: 5V/2A,3.3V Input voltage: 1-3S Lipo Support Receiver: PPM, Ibus, Sbus, Dsmx Black box: NO Barometer: NO Firmware: MATEKF411 Buzzer interface: YES Betaflight OSD: AT7456E Constant current: 15A Peak current: 17A MCU: EFM8BB21F16G(48MHz) Firmware: BLHeli_S Protocol: Dshot600 Mounting: 25.5X25.5 M2 VTX Input Voltage: 7V~24V RF Output Power: 0mW/25mW/100mW/200mW switchable Antenna Connector: U.FL Caddx Ant Camera Model: Caddx Ant Image Sensor: 1/3" CMOS Resolution: 1200TVL Signal System: PAL/NTSC Includes 1x DarwinFPV BNF Baby Ape Pro V2 3" Quad - Plug-N-Play - Choose Version

Read more less

CineApe25 is DarwinFPV’s first cinematic whoop FPV drone. The frame is composed of upper and lower carbon plates and a high-strength injection guard, which is very strong and crash-resistant, and easy to disassemble. The motor adopts a 1504-3600KV long-life motor; we abandoned the traditional AIO solution and adopted the split design of the F4, 30A stack to reduce the maintenance cost in the future. The accessories adopt mature and stable solutions to maximize the durability and reliability of the drone. Be sure to check out our Cinewhoop Collection as well as all DarwinFPV products we have for sale at RaceDayQuads! CineApe25 is a very cost-effective whoop FPV drone. It not only solves the worries of beginners about the high-risk factors and high threshold of assembly but also improves the after-sales experience. If you are still struggling with which FPV drone to buy, DarwinFPV CineApe25 may be your best choice! Features Comes with high-strength one-piece injection-molded propeller guard, which has higher safety, and a stronger and more durable frame, also reduces the probability of risk, so you have more confidence to fly. The new ducted aerodynamic design greatly optimizes power efficiency, and with the 1504-3600KV long-endurance motor, the CineApe 25 has a battery life of up to 9mins. Compared with traditional stacks, we have treated the CineApe 25 stack with glue to protect it, which greatly reduces the risk of damage to the stack due to contact with metal particles, fine sand and gravel, weeds or dewdrops, etc. The external Type-C parameter adjustment port is convenient for parameter adjustment. It comes with quick-release design only needs to remove 7 screws to separate the top plate and the injection molding guard, which can easily deal with the scene in which accessories need to be replaced urgently. The stack has built-in barometer and SD card slot, and reserves rich interfaces resource, which is facilitate upgrade and DIY in the future. There are optional versions and HD VTX solutions can be provided. Specifications Brand: DarwinFPV Model: CineApe 25 Cinematic FPV Drone Frame Structure: True-X Wheelbase: 112mm Dimension: 160x160x43mm Motor: 1504-3600KV Propeller: HQProp T63MMX6 Recommend Battery: LiPo 4S 850mAh Hovering Time: 9mins (4S 850mAh Battery) Weight: 144g (Without Battery) Flight Controller: F411 MPU6500 AT7456E Reserved Connector: 1x SBUS (RX1 inverter), 2x Uarts 2x Softserial, 1x I2C, 1x RGB, 1x Buzzer, 1x USER (A15), 1x USB ESC: BlueJay 3-4S 30A Analog Version: CADDX ANT Analog CAM + 600mW Analog VTX Includes 1x CineApe 25 Cinematic FPV Drone 4x HQProp T63MMX6 propeller (2L2R) 2x battery strap 10x170mm 1x EVA crashproof foam 1x EVA bottom plate shock-absorbing pad 1x Spare Screw Kit 1x Sticker 1x Manual  

Read more less

All items with batteries must be shipped by a ground shipping method. The TinyHawk 2 RTF kit has everything you need to enjoy micro flight, all packed into a handy carrying case! This is truly the ideal way to try out FPV!  2 batteries are included (a 1S and a 2S), but if you want to maximize your air time, we recommend picking up a few of the following RDQ Series LiPos: 1S 450mAh - PH2.0 2S 300mAh - PH2.0 Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!   Specifications Frame Wheelbase: 75mm Dry Weight: 31.2g All Up Weight: 43.5g with 1x 450mAh 1S battery Frame Material: Polypropylene  Motors Stator Size: 0802 Kv: 16000kv Propeller Mount: Push-On Avan TH-style Propeller: Avan Turtlemode 4-Blade All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode) Battery Connector: JST-PH2.0 FPV System VTX Power: 25/100/200mw Switchable Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Includes 1x Tinyhawk II FPV Racing Drone 1x EMAX Transporter 5.8G FPV Goggles 1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging 1x EMAX E6 Transmitter 1x EMAX 450mAh 1S HV Battery 1x EMAX 300mAh 2S HV Battery 2x CCW + 2x CW Spare Props 1x 1S-2S USB LiPo Charger 1x Screwdriver + Hardware Kit 1x Micro USB Charging Cable 1x Faux Carbon Fiber Carrying Case

Read more less