ARA310479, Arrma Steel Mod1 Pinion Gear (w/5mm Bore) (18T) These Arrma Pinion Gears are MOD1 and are offered in a variety of tooth counts. Each package includes one Steel pinion gear and one set screw. Arrma Kraton 6S BLX Arrma Mojave 6S BLX Arrma Nero 6S BLX Arrma Notorious 6S BLX Arrma Outcast 6S BLX Arrma Senton 6S BLX Arrma Typhon 6S BLX Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision manufactured tooth profile for smooth operation Precision manufactured double set screw holes for the fitment of set screws either side of the motor shaft for extra secure fitting For fitment to 5mm motor shaft This product was added to our catalog on December 12, 2021

Read more less

Arrma Safe-D5 Mod1 Pinion Gear Arrma Safe-D5 Mod1 Pinion Gears feature a "D" shaped hole that allows the motor shaft to key inside the pinion gear, eliminating the loss of drive and brakes if the set screws comes loose. This tough steel Pinion Gear is available in multiple tooth count options, allowing you to fine tune the gear ratio. Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision manufactured wide tooth profile for smooth operation 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out Suits 5mm motor shaft diameter Precision manufactured threaded set-screw hole E-clip supplied for motor shaft pinion retention Includes: (1) Mod1 Safe-D Pinion Gear (1) Set Screw - M4 x 4mm (1) E-Clip - 3.2mm This product was added to our catalog on March 14, 2021

Read more less

Arrma Safe-D5 Steel Mod 0.8 Pinion Gears feature a D shaped hole that locks onto the motor shaft and helps to prevent the loss of drive and brakes if the set screw backs out. These gears are machined from steel for durability and fit 5mm motor shafts.  Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision manufactured wide tooth profile for smooth operation  'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out  Suits 5mm motor shaft diameter  Precision manufactured threaded set-screw hole  E-clip supplied for motor shaft pinion retention Includes: 0.8 Module Safe-D Pinion Gear (1) Set Screw - M4 x 4mm (1) E-Clip - 3.2mm This product was added to our catalog on March 23, 2021

Read more less

HRANSG3231, Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear w/5mm Bore (31T) Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear. These pinion gears are an essential upgrade for your UDR. Precision machined hardened steel, combined with a black nitride coating help to make the gear durable, and with the availability of multiple tooth count options you have the gears to tune your ratio for a variety of conditions. Features: CNC machined Hardened steel to increased wear resistance and improve fatigue life Nitride coating to enhanced hardness and corrosion resistance 5mm Bore 32 pitch NOTE: 32 standard pitch is the same as 0.8 mod Includes: (1) pinion gear (1) M5x5mm set screw This product was added to our catalog on December 16, 2021

Read more less

HRANSG3234, Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear w/5mm Bore (34T) Hot Racing Traxxas Unlimited Desert Racer 32P Steel Pinion Gear. These pinion gears are an essential upgrade for your UDR. Precision machined hardened steel, combined with a black nitride coating help to make the gear durable, and with the availability of multiple tooth count options you have the gears to tune your ratio for a variety of conditions. Features: CNC machined Hardened steel to increased wear resistance and improve fatigue life Nitride coating to enhanced hardness and corrosion resistance 5mm Bore 32 pitch NOTE: 32 standard pitch is the same as 0.8 mod Includes: (1) pinion gear (1) M5x5mm set screw This product was added to our catalog on December 16, 2021

Read more less

PTK-8066, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (13T) This product was added to our catalog on December 16, 2021

Read more less

PTK-8068, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (15T) ProTek R/C Steel Mod 1 Pinion Gears are an affordable pinion gear option that doesn't skimp on quality. CNC machined from hardened steel material, these precision cut gears are durable and are perfect for any Mod 1 pitch application. Available in 11 - 20 tooth variants, these gears feature a 5mm bore with the tooth count engraved on the gear for easy identification. Plus, each gear includes a setscrew to make installation easy. Choose the tooth count you need from the pull down menu above. This product was added to our catalog on February 8, 2022

Read more less

PTK-8069, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (16T) ProTek R/C Steel Mod 1 Pinion Gears are an affordable pinion gear option that doesn't skimp on quality. CNC machined from hardened steel material, these precision cut gears are durable and are perfect for any Mod 1 pitch application. Available in 11 - 20 tooth variants, these gears feature a 5mm bore with the tooth count engraved on the gear for easy identification. Plus, each gear includes a setscrew to make installation easy. This product was added to our catalog on December 16, 2021

Read more less

PTK-8073, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (20T) ProTek R/C Steel Mod 1 Pinion Gears are an affordable pinion gear option that doesn't skimp on quality. CNC machined from hardened steel material, these precision cut gears are durable and are perfect for any Mod 1 pitch application. Available in 11 - 20 tooth variants, these gears feature a 5mm bore with the tooth count engraved on the gear for easy identification. Plus, each gear includes a setscrew to make installation easy. This product was added to our catalog on December 16, 2021

Read more less

Traxxas 32P Hardened Steel Pinion Gear w/5mm Bore These are Traxxas 32 Pitch Hardened Steel Pinion Gears. These gears are used for various Traxxas models and feature 5mm Bore center hole, compatible with 5mm motor shafts. This product was added to our catalog on April 12, 2021

Read more less

Traxxas Steel Mod 1.0 Pinion Gear w/5mm Bore (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) Traxxas Steel Mod 1.0 Pinion Gear. This durable steel pinion gear has a 5mm bore and a Mod 1 tooth pitch, making it compatible with a variety of applications. The gear is available in a variety of tooth count options, please select the specific gear you want from the pull down list above. Package includes pinion gear and set screw. This product was added to our catalog on April 12, 2021

Read more less

YEA-MG-10010, Yeah Racing Hardened Steel Mod 1 Pinion Gear (5mm Bore) (20T) Yeah Racing Hardened Steel Mod 1 Pinion Gear. Made from HD steel for extreme durability and strength. These pinions use a 5mm bore and are laser etched with pitch and teeth count for easy identification. These pinions are available in multiple sizes. Please select the size you need from the list above. Features: Made from hardened steel Uses a 5mm bore Laser etched with pitch and teeth count This product was added to our catalog on November 26, 2021

Read more less

YEA-MG-10013, Yeah Racing Hardened Steel Mod 1 Pinion Gear (5mm Bore) (23T) Yeah Racing Hardened Steel Mod 1 Pinion Gear. Made from HD steel for extreme durability and strength. These pinions use a 5mm bore and are laser etched with pitch and teeth count for easy identification.Features: Made from hardened steel Uses a 5mm bore Laser etched with pitch and teeth count Compatibility: Arrma Kraton 6S BLX Arrma Nero 6S BLX Arrma Notorious 6S BLX Arrma Typhon 6S BLX Kyosho DBX VE Kyosho MP9e Losi 8IGHT-E 1.0 Losi 8IGHT-E 2.0 Losi 8IGHT-T E 3.0 Mugen MBX8TE Team Associated RC8.2e Tekno RC EB48 Original Tekno RC EB48.2 Tekno RC EB48.3 Tekno RC EB48.4 Traxxas X-Maxx This product was added to our catalog on December 16, 2021

Read more less

YEA-MG-10014, Yeah Racing Hardened Steel Mod 1 Pinion Gear (5mm Bore) (24T) Yeah Racing Hardened Steel Mod 1 Pinion Gear. Made from HD steel for extreme durability and strength. These pinions use a 5mm bore and are laser etched with pitch and teeth count for easy identification. These pinions are available in multiple sizes. Please select the size you need from the list above. Features: Made from hardened steel Uses a 5mm bore Laser etched with pitch and teeth count This product was added to our catalog on December 16, 2021

Read more less

Yeah Racing Hardened Steel Mod 1 Pinion Gear (5mm Bore) Yeah Racing Hardened Steel Mod 1 Pinion Gear. Made from HD steel for extreme durability and strength. These pinions use a 5mm bore and are laser etched with pitch and teeth count for easy identification. Features: Made from hardened steel Uses a 5mm bore Laser etched with pitch and teeth count This product was added to our catalog on May 16, 2021

Read more less