ASC3924, Team Associated 48P Precision Spur Gear (66T)
Team Associated 48 Pitch Spur Gear. These spur gears are compatible with all Team Associated touring car and pan car models, and are available in multiple tooth count options to fine tune torque and top speed.
ASC9648, Spur Gear, 69T 48P
Team Associated 48 Pitch "Brushless" Spur Gear. These spur gears are compatible with a variety of Team Associated slipper clutch equipped vehicles. Featuring a smaller design, these gears moves the motor forward for better balance and more predictable handling, and allow the use of smaller pinion gears. They allow gear ratios that are optimized for 17.5, 13.5, and 10.5 motors.
Features:
Smaller design for gear ratios used with 17.5, 13.5 and 10.5 brushless motors.
Allows the use of smaller sized pinion gears.
Moves motor forward for better balance and more predictable handling.
69T, 72T and 75T available (48 pitch).
ASC9653, Team Associated 48P Spur Gear (81T)
Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed.
This product was added to our catalog on January 29, 2022
ASC9654, Team Associated 48P Spur Gear (87T)
Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed.
This product was added to our catalog on January 29, 2021
HRASTE873, Hot Racing Traxxas 48P Hardened Steel Spur Gear (73T)
The Hot Racing Traxxas 48P Hardened Steel Spur Gear is an optional spur gear intended for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride models. The spur gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one spur gear and mounting hardware.
NOTE: Motor temperature should never exceed 180F (under 160 recommended). ESC temperatures should never exceed 160F. Excessive temperatures will shorten the life of the electronics.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Black oxide coated gear for durability and corrosion resistance
Red anodized countersunk aluminum washers
High strength hardware
Specifications:
Gear Pitch: 48 pitch
Mounting Holes: 3
Tooth Face width: ~5mm
This product was added to our catalog on May 16, 2021
HRASTE876, Hot Racing Traxxas 48P Hardened Steel Spur Gear (76T)
Compatibility
Traxxas Bandit
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
Traxxas Telluride 4x4
The Hot Racing Traxxas 48P Hardened Steel Spur Gear is an optional spur gear intended for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride models. The spur gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one spur gear and mounting hardware.NOTE: Motor temperature should never exceed 180F (under 160 recommended). ESC temperatures should never exceed 160F. Excessive temperatures will shorten the life of the electronics.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Black oxide coated gear for durability and corrosion resistance
Red anodized countersunk aluminum washers
High strength hardware
Specifications:
Gear Pitch: 48 pitch
Mounting Holes: 3
Tooth Face width: ~5mm
This product was added to our catalog on February 21, 2022
KIM145, Kimbrough 48P Spur Gear (78T)
Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.
Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.
NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on March 19, 2021
KIM147, Kimbrough 48P Spur Gear (84T)
Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.
Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.
NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on December 19, 2021
KIM149, Kimbrough 48P Spur Gear (90T)
Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on December 19, 2021
KIM150, Kimbrough 48P Spur Gear (69T)
Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.
Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.
NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on December 19, 2021
KIM301, Kimbrough 48P Spur Gear (66T)
Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.
Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.
NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on December 19, 2021
KIM381, Kimbrough 48P Traxxas Spur Gear (81T)
Kimbrough Products 48 Pitch Traxxas spur gears were developed for Traxxas 1/10 Electric vehicles. Kimbrough Racing Products Plastic Gears have been used to set all of the unlimited speed records for R/C 1/10 scale electric cars in the U.S., and are used by a majority of the top professional R/C car racers around the world. The best drivers in the world trust Kimbrough gears, so you know you can too!
Kimbrough spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.
Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.
NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on May 19, 2021
KIM387, Kimbrough 48P Traxxas Spur Gear (87T)
Kimbrough Products 48 Pitch Traxxas spur gears were developed for Traxxas 1/10 Electric vehicles. Kimbrough Racing Products Plastic Gears have been used to set all of the unlimited speed records for R/C 1/10 scale electric cars in the U.S., and are used by a majority of the top professional R/C car racers around the world. The best drivers in the world trust Kimbrough gears, so you know you can too!Kimbrough spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.
Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.
NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on November 18, 2021
