This product is the checker only. It does not include cables.
This battery checker takes the guesswork out of wondering what levels your Whoop Batteries are at! A much needed accessory for any FPV pilot.
Check out our other 1S Battery Chargers and Accessories!
Features
Accepts both types of the plugs 2.0 JST female and 1.25 JST female
Battery voltage detection, reverse connection protection.
Does not check HV batteries - only normal 3.7v
Includes
1x 1S LiPo Whoop Battery Checker - PH2.0 and JST 1.25
All batteries must be shipped by a ground shipping method.
The Auline 500mAh 3.8V 80C 1S1P LiHV Battery Pack with a PH2.0 plug is the best battery choice for micro quads. This lipo comes with an 80C discharge rate and a high burst rate, making indoor racing much more fun!
Check out all our 1S LiPos, and the rest of our Auline products
Specifications
Brand: Auline
Capacity: 500mAh
Voltage: 3.8V
C-Rate: 80C
Weight: 13.2g
Charging: 1C-Max2C
Assemble: 1S1P
Plug: PH2.0
Noted: EX, HV
Includes
1x Auline EX 3.8V 1S 500mAh 80C LiHV Whoop/Micro Battery - PH2.0
Lightweight 65mm whoop drones are becoming popular among racing enthusiasts. Experience powerful performance with the BetaFPV 0702 30000Kv Dual Ball Bearing Micro Motor 4 Pack. These motors boast dual ball bearings and strong reliability and efficiency to empower your flight.
Take a look at all of our micro motor selections and our BetaFPV products!
Features
These motors are customization designs for the ultra-lightweight 65mm racing drone, featuring unparalleled performance in extreme racing flight.
The 0702 motor boasts double ball bearings
For those seeking even higher speeds, the 30000Kv option provides more punch on the throttle. These motors are ideal for indoor FPV racing and enable aggressive flying.
Paired with The PEEK screws, only weighing 0.10 grams/12pcs, it can save up to 0.46 grams for a build. With more heat resistance, anti-friction, anti-shock, and anti-fatigue properties, the PEEK screws are both reliable and durable.
Plug-and-play motors
Specifications
Bearing Dual Ball Bearings
KV: 30000
Weight: 1.52g±0.03g
Weight Without Connector: 1.45g
Color: Black/Red
Shaft Diameter: 1mm
Shaft Length: 4.2mm
Hole Distance: 6.6mm
Motor Mount Holes: M1.4
Input Voltage: 1S
Cables 35mm including connector, 30AWG cables
Dimensions: 12.75xφ9mm
Motor Bolt Pattern: 6.6mm Tri-Mount
Includes
1x BetaFPV 0702 30000Kv Dual Ball Bearing Micro Motor 4 Pack
15x M1.4x3 PEEK screws
12x M1.4x3 metal screws
Lightweight 65mm whoop drones are becoming popular among racing enthusiasts. Experience powerful performance with the BetaFPV 0702SE 25000Kv Brass Bushings Micro Motor 4 Pack. Enjoy a higher level of performance with this reliable 4-pack.
Take a look at all of our Micro Motor selections and our BetaFPV products!
Features
These motors are customization designs for the ultra-lightweight 65mm racing drone, featuring unparalleled performance in extreme racing flight.
Paired with The PEEK screws only weighing 0.10 grams/12pcs, it can save up to 0.46 grams for a build. With more heat resistance, anti-friction, anti-shock, and anti-fatigue properties, the PEEK screws are both reliable and durable.
The truth is that for all speeds of 0702 motors, there is a 603 or 802 size motor that can achieve the same thrust with greater efficiency, the 0702 is favored by active FPV pilots for its ability to reduce weight away from the aircraft's center of gravity. The brass-bushed 0702SE motor is a reliable and cost-effective choice for these pilots.
Plug-and-play motors
Specifications
Bearing Brass Bushings
KV: 25000
Weight: 1.42g±0.03g
Weight Without Connector: 1.35g
Color: Ice Blue/Black
Shaft Diameter: 1mm
Shaft Length: 4.2mm
Hole Distance: 6.6mm
Motor Mount Holes: M1.4
Input Voltage: 1S
Cables 35mm including connector, 30AWG cables
Dimensions: 12.75xφ9mm
Includes
1x BetaFPV 0702SE 0702 25000Kv Brass Bushings Micro Motor 4 Pack
15x M1.4x3 PEEK screws
12x M1.4x3 metal screws
0802SE Brushless Motors is a lightweight of only 1.8g/pc for 1S whoop drones. It ensures excellent performance of power and thrust and makes the perfect dynamic balance, providing flexibility and longer flying time for drones.
Take a look at all of our micro motor selections and our BetaFPV products!
Features
0802SE 19500KV Brushless Motors (2022 version) comes with a completely new look. The whole motors are silver in the air, looking very bright.
0802SE Motor makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time. With its lightweight of 1.8g/pc, it is ideal for the weight-sensitive 65mm brushless whoop drone.
19500KV and 23000KV options greatly meet the pilots' needs for different flying purposes.
Lead wire is soldered to the PCB, allowing you to repair it easier once disconnected.
Specification
Item: 0802SE 19500KV brushless motor
Weight: 1.83g/pc
Kv: 19500KV
Color: Black/Ice Blue
Shaft length: 5mm
Shaft diameter: 1mm
Hole distance: 6.6mm
Motor Mount Holes: M1.4
Input Voltage: 1S
Cables: 35mm long, 30AWG cables
Dimensions: 10.5x10.5x13.8mm (2022 version)
Bearings: Brass Bushings
Includes
4x BETAFPV 0802SE Brushless Motors 19500Kv
1x Pack of M1.4x3 Screws
Classic 1102 stator size, matched with an impressive 22000Kv, gets you amazing whoop motors that will take you from regular flying to absolute ripping. Choose between a black base with red accents or a silver base with blue accents. We also carry the classic 1102 18,000Kv version as well!
These motors come with motor plugs attached.
Take a look at all of our micro motor selections and our BetaFPV products!
Features
Adopts the technology of ball bearing, which effectively reduces the friction between the bearing surfaces, increases the duration of the motor, and improves its efficiency.
Lead wire is soldered to the PCB, which allows you to repair it more easily once disconnected.
With exquisite workmanship, provides the most incredible power and thrust in the lightest weight of 2.79g; sturdy structure, and high-quality materials make it performs like a beast.
Possesses dynamic balance and crush-resistant damping bearing, which can eliminate vibration effectively.
The 22000KV version can provide more thrust for aggressive indoor FPV racing.
Specification
Height: 13.6mm (2022 version)
Weight: 2.79g/pc
Shaft Diameter: 1.5mm
Shaft Length: 5mm
Motor Mount Holes: 3-M1.4-φ6.6
KV (rpm/V): 22000KV
Input Voltage: 1S Lipo
Plug and cables: Micro JST-1.25 3-pin connector with 28AWG cables
Includes
1x BetaFPV 2022 Series 1102 22000Kv Micro/Whoop Motor 4 Pack - Choose Your Color
BETAFPV offers 2 versions of the 2S Battery Charger and Voltage Tester, each with different ports - BT3.0 and XH2.54 - capable of charging both LiHV 8.7V and LiPo 8.4V batteries. Not only does it have a digital display function, but it also features 2S battery voltage monitoring capabilities. Additionally, it supports PD3.0 fast charging protocol. This compact and portable charger is fully functional and user-friendly, and caters to the charging needs of 2S quadcopter enthusiasts, empowering them to recharge their batteries anytime, anywhere.
Check out our other charging accessories, as well as our range of BetaFPV gear!
Features
A compact and portable 2S Battery Charger and Voltage Tester with a digital display, specifically designed for the BT3.0 series of batteries.
It supports the PD3.0 fast charging protocol, offering higher power output and multiple charging options for a faster and safer charging experience with compatible devices.
Equipped with a digital display function and capable of monitoring battery voltage during charging.
With dual variants boasting BT3.0 and XH2.54 ports, this charger offers RC users different connection options.
Featuring a Type C interface instead of a USB interface, providing an even wider selection of charging options
Fulfilling the charging requirements of 2S batteries, this charger is a go-to choice for discerning enthusiasts.
XH2.54
This charger is compatible with 2S LiPo batteries(8.4V) and has an XH2.54 battery port. Please note that charging 2S LiHV batteries (8.7V) may result in undercharging. We recommend using a LiPo 2S battery with a corresponding balance connector available in the market. During the charging process, if the digital display shows a voltage exceeding 8.4V (e.g. 9V), please disconnect the power supply immediately and check if there is any issue with the battery or the charger.
BT3.0
This charger is designed to charge 2S LiHV batteries(8.7V) with a BT3.0 battery port. Please note that attempting to charge 2S LiPo batteries(8.4V) may pose a risk of overcharging. To ensure safe and optimal charging, we recommend using it with the BETAFPV BT3.0 450mAh 2S LiHV battery. During the charging process, if the digital display shows a voltage exceeding 8.7V (e.g. 9V), please disconnect the power supply immediately and check if there is any issue with the battery or the charger.
Specifications
Battery Type: BT3.0-LiHV(charging voltage:8.7V) / XH2.54-LiPo(charging voltage:8.4V)
Product Color: White(BT3.0) / Black(XH2.54)
Input Interface: Type-C USB
Input Voltage Range: 5-12V
Input Power: Maximum 15W
Maximum Input Current: 2.5A
Charging Protocol: PD3.0
Weight (per charger): 17.0±1.0g
Dimensions (L×W ×H): 61*25*17mm
Battery Capacity Display: LED Digital Display displays the total voltage and individual cell voltage of the
2S battery
LED Digital Display and Red LED indicate charging status:
Usage Notes
Please note the polarity markings on the device and do not connect the charger in reverse polarity.
The 2S Battery Charger and Voltage Tester only supports charging for 2S batteries, not 1S batteries.
The charger can only charge one battery at a time and is not designed for charging two or more batteries simultaneously.
Includes
1x BetaFPV 2S Battery Charger / Voltage Tester - Choose Your Version
All batteries must be shipped by a ground shipping method. Updated packaging.
BT2.0 Connector - the most significant revolution in 1S Whoop Drone. Since February 2019, we've got some feedback on Facebook about how eager they need the high-quality solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demands. BETAFPV always keeps moving forward with a passion for breakthrough experiences.After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with a BT2.0 connector in the current market, it has an exclusively designed BT2.0 connector, which has broken through the bottle-neck of the PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time, and better performance, just need to simply modify its connector to BT2.0 connector.We also carry 260mAh, 300mAh and 450mAh 1S BT2.0 packs!
Check out all our 1S batteries and all our BetaFPV gear
Features
BT2.0 connector decreased the internal resistance of the connector effectively by upgrading the crimped pins to a 1.0mm banana connector and increasing the cross-sectional area of the 1.0mm banana connector.
BT2.0 300mAh 1S 30C Battery supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. With this BT2.0 300mAh 1S battery, all 1S brushless drones will gain powerful and perfect performance.
By solving the problem of voltage sag, the discharge of the 300mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without the disturbance of low voltage warnings.
Compared with the PH2.0 crimped pins, the BT2.0 connector is more durable and can discharge more currents in the same capacity and provide far more power. You can get a 2mins flight time in full throttle on Meteor65.
Specifications
Item: 1S battery
Capacity: 300mAh
Rate: 30C/60C
Voltage: 4.35V
Dimension: 67.3x11.8x6.1mm
Connector: Betafpv BT2.0 connector
Weight: 8.28g(1pcs)
BT2.0 Connector
There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 260mAh battery. The discharge current is 9A in this testing. You could see that it has longer discharge time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.
Here is Betafpv Lab video to show you the best way to replace PH2.0 to BT2.0 connectors.
Includes
8x BT2.0 300mAh 1S 30C Battery
All batteries must be shipped by a ground shipping method. New Packaging!
After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with BT2.0 connector in the current market, it has exclusive designed BT2.0 connector, which has broken through the bottle-neck of PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time and better performance, just need to simply modify its connector to BT2.0 connector.
BT2.0 Connector - the most significant revolution in 1S Whoop Drone.
We also carry 260mAh, 300mAh and 450mAh 1S BT2.0 packs!
Check out all our 1S batteries and our BetaFPV selection!
Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell'video- Proof that BT2.0 connector is better than PH 2.0
Since February 2019, we've got some feedback on Facebook about how eager they need the high quality of solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demand. BETAFPV always keeps moving forward with passion for breakthrough experiences.
After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with BT2.0 connector in the current market, it has exclusive designed BT2.0 connector, which has broken through the bottle-neck of PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time and better performance, just need to simply modify its connector to BT2.0 connector.
Features
BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
By solving the problem of voltage sag, the discharge of the 450mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.
BT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with this BT2.0 450mAh 1S battery.
It is perfectly suitable for Emax Tinyhawk, it can provide stable and consistent power, which achieved dynamic balance and longer flight time. Just need to simply modify the PH2.0 connector to BT2.0 connector.
Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power.
High-end technology to guarantee high quality and consistent performance.
We released BT2.0-PH2.0 adapter cable, which is convenient to charge BT2.0 battery with stock PH2.0 charger. Meanwhile, we also release BT2.0 all-in-one battery Tester & charger for your need.
Specifications
Capacity: 450mAh
Rate: 30C/60C
Voltage: 4.35V
Dimension: 61x15x7.5mm
Connector: Betafpv BT2.0 connector
Weight: 12.7g(1pcs)
Includes
4x BT2.0 450mAh 1S 30C Battery
BT2.0 CONNECTOR
There is a graph of comparison between BT2.0 connector 1S 450mAh battery and Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has longer time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.
All batteries must be shipped by a ground shipping method.
BT2.0 Batteries are well renowned for delivering excellent performance and durability in 1S whoop drones. It is capable of delivering a discharge rate of 40C (continuous) and 80C (burst). A Larger capacity and stronger power bring more flight time and robust flight performance to 75-85mm whoop drones.
Check out all our 1S batteries and all our BetaFPV gear
BT2.0 connector decreased the internal resistance of the connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
Resistant to voltage sag, making pilots are able to enjoy more flight time without the disturbance of low voltage warnings.
BT2.0 550mAh 1S Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with this BT2.0 550mAh 1S battery.
Compared with the PH2.0 crimped pins, the BT2.0 connector is more durable and can discharge more currents in the same capacity and provide far more power.
It is perfectly suitable for BETAFPV 1S whoop drones that use the BT2.0 450mAh battery, it can provide stable and consistent power, which achieved dynamic balance and more flight time. For example, Meteor75, Meteor75 HD, Meteor75 Pro, Meteor75 Pro HD, Cetus Pro, and Cetus X (double 1S battery in serial).
Specifications
Item: BT2.0 550mAh 1S Battery
Capacity: 550mAh
Rate: 40C/80C
Voltage: 4.35V
Dimension: 69.5x16.2x6.5mm
Connector: Betafpv BT2.0 connector
Weight: 13.99g/pc
Includes
1x BetaFPV 3.8V 1S 550mAh 40C LiHV Whoop/Micro Battery 4 Pack - BT2.0
On the latest version, "OFF" Position is for charging 4.2V.
The new 6 port 1S battery charger from BetaFPV supports PH2.0 and BT2.0 at the same time. The charging is faster when using 30W adapter. Compact, fast-charging, and portable, choosing a 1S battery charger that best suits your needs will no longer be difficult with this 6 Ports 1S charger & adapter.
Check out all our 1S chargers, and our BetaFPV gear!
Features
With BT2.0/PH2.0 two types of battery ports, the charger allows charging BT2.0 and PH2.0 batteries at the same time.
By supporting multi-charging protocols including PD3.0/QC3.0/BC1.2, every port's charging current can reach 1A, which makes charging faster.
This portable 30W Type-C power adapter offers fast, efficient charging at home, or on the go.
The power adapter is compatible with any USB‑C-enabled device, you can also pair it with other devices to take advantage of the fast-charging feature.
Both EU and US adapters are provided for your choice.
Specifications
Input connector: Type-C
Input voltage range: 5-12V
Max input power: 30W
Max input current: 2.5A
Max charging current: 1A (Single-port)
Support battery connector: BT2.0&PH2.0
Charging protocol：PD3.0 / QC3.0 (5V / 9V / 12V) / BC1.2
Battery Type：Lipo 4.2V / LiHV 4.35V
Dimensions：79x46x19mm
Includes
1x BetaFPV 6 Port 1S Charger for BT2.0 & PH2.0
1x User manual
1x USA Power Adapter (Only With AC Adpater Version)
1x Type-C to Type-C cable (Only With AC Adpater Version)
All batteries must be shipped by a ground shipping method.
Cetus X Brushless Quadcopter is a 2S power whoop drone and a primary choice for beginners who want to get advanced flight skills. It features a stronger propulsion system for a speedier and more violent flight, which is capable of performing diverse freestyle tricks. Equipped with M04 400mW VTX and C04 FPV camera that is optimized for longer radio and video transmission. Meanwhile, it supports the Betaflight configurator which is a popular application to configure RC aircraft.
Check out our other RTF combos, all our pre-built quads and our BetaFPV selection!
Features
An excellent preference for beginners to get advanced level. Cetus X brushless Quadcopter is proud of its lightning speed with rapid startup due to its stronger propulsion system.
Build-in ExpressLRS 2.4G receiver that is the most popular radio link, low latency, and far controlling range are possible. Pilots can not only enjoy the flight indoors but also explore the scenery outdoor.
Featuring M04 400mW VTX, C04 FPV camera (based on Caddx Nano Ant Camera or Runcam Nano 4), and 2xBT2.0 450mAh 1S 30C battery for longer radio and video transmission and flight endurance, Cetus X brushless quadcopter allows beginners to gain more achievements in FPV flight.
Classical white design inherited from Cetus Series and made of PA12 material, Cetus X frame has an excellent impact resistance in drop & impact. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots.
Specifications
Item: Cetus X Brushless Quadcopter
Weight: 55g
Wheelbase: 95mm
FC: F4 1S 12A FC V2.2 (ELRS 2.4G)
Motors: 1103 11000KV Motor
Props: Gemfan 2020 4-Blades Props
Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4)
Camera Adjustable Angle: 0°-40°
Receiver Protocol: ELRS 2.4G
VTX: M04 25-400mW VTX
Battery: 2*BT2.0 450mAh 1S 30C Battery
Flight time: 5 mins
Downloads
FC Firmware and ESC download
Includes
1 x Cetus X Brushless Quadcopter
1 x BT2.0 Battery Charger and Voltage Tester
2 x BT2.0 450mAh 1S 30C Battery
1 x Phillips Screwdriver
1 x Prop Removal Tool
1 x Type-C Adapter
4 x Gemfan 2020 4-Blades Props
All products with batteries must be shipped by a ground shipping method.
Check out the this BNF Meteor75 Pro HD 1S Brushless Whoop from BETAFPV. This quad is impressive with its clean aesthetic and its down right powerful performance. BETAFPV wants you to know this is the largest 1S digital whoop you can get today. This BNF will feature a F4 1S 5A FC, with 1102 22000Kv motors and ideally you would want a 550mAh 1S Battery to use with this quad. With this frame, you will get to see a more roomier battery slot for ease of use, as well as to able to accommodate a bigger battery.
Note: The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP.
Make sure to check out our other Pre-Built quads and the rest of our BetaFPV selection!
Features
The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks.
It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.
Micro Canopy Lite has an adjustable camera lens of 0-40°. This new canopy weighs only 1.1g, which is very suitable for HD digital VTX drone, and the open design makes the electronics cooler better.
Equipped with F4 1S 5A flight controller (Serial ELRS 2.4G or SPI Frsky). The ELRS 2.4G RX version comes with the default ELRS V2.0 firmware and supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware. The SPI Frsky version can be also used as the PNP version to connect external receiver due to the two UART ports on the board.
The various colors of the spare parts including the Meteor75 Pro frame and Micro
Reserve two UART ports on F4 1S 5A FC(SPI Frsky) V3.0 board. The Frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it.
Ultralight weight for Meteor75 Pro HD 35.77g (Walksnail)/ 34.87g (HDZero), this largest 1S drone combined with Walksnail or HDZero HD digital VTX system gives pilots an immersive flight experience and impactful visuals.
HD Digital VTX System
HDZero Nano Lite Camera is designed for feather-lite drones where every gram counts. At a weight as low as 1.5g, combined with the new Whoop Lite VTX at 4.5g with 0.4g dipole antenna enables a world’s-first production digital FPV solution of about 7g. The HDZero Whoop lite Bundle supports 1-3S power input with 25mW/200mW RF power and is capable of recording in 720P/60FPS with super low latency of less than 19ms. What's more, pilots can activate and configure its OSD function on Betaflight Configurator.
Flight Controller
The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor75 HD. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. The ESC on the new board is powered by BB51 hardware in place of BB21. Last but not least, we update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.
Meteor75 Pro HD (ELRS)
Meteor75 Pro HD (Frsky, PNP, TBS)
FC Inside
F4 1S 5A FC (Serial ELRS 2.4G) V2.0
F4 1S 5A FC (SPI Frsky) V3.0
Gyro
BMI270
BMI270
FC Firmware
BETAFPVF411
BETAFPVF411RX
UART Port
One UART Port
Two UART Ports
External RX
Not Supported
Supported
Note: Pay attention, ONLY the newest Betaflight firmware 4.3.1 start to support this BMI270 gyrometer. Please check the below link to download the firmware and CLI dump file. If you update the 4.3.1 firmware from Betaflight official site, please flash the CLI dump file for Meteor75 HD.
Micro Canopy Lite
Micro Canopy Lite is specially designed to be compatible with HD digital VTX and has an adjustable camera lens of 0-40°. By using the new Micro Canopy Lite, the weight of the drone is reduced, which in turn can improve flight performance and increase flight time. The open design helps to dissipate heat more effectively, reducing the risk of damage to the VTX or other electronic components inside the drone.
Endurance Boosting Battery
With the new BT2.0 550mAh 1S battery, Meteor75 Pro HD ensures more flight time up to 5:30 (Walksnail)/5:40 (HDZero) so that pilots can less worry about the battery. What's more, it has a discharge of 40C (continuous) and 80C (burst), bringing a robust flight experience to pilots.
Meteor HD Series
BETAFPV has been optimizing and upgrading the Meteor series for better performance. The Meteor HD Series whoop drones including Meteor75 1S HD, and Meteor85 2S HD with Walksnail or HDZero HD digital VTX system aim to provide pilots with an immersive flight experience for FPV racing and high-definition images.
Meteor75 Pro Frame
Meteor75 Pro frame is the largest 1S whoop frame with 45mm propellers currently and comes with more features. The frame features a roomier battery slot for more battery choices such as BT2.0 550mAh battery. The motor holder is using a triangle bilateral stretch structure, giving pilots a more durable and smoother flight experience. In addition, the Meteor75 Pro frame offers seven colors for options, which pilots should purchase separately.
Powerful 1S Drone Combo
Even carrying the HD digital VTX system, Meteor75 Pro HD still performs well in power and speed thanks to its upgraded frame that is suitable for 45mm props, allowing it to be the largest 1S power whoop drone with greater thrust and lift. Fit out with 1102 22000KV motors and BT2.0 550mAh 1S battery, this 1S drone combo has an excellent thrust-to-weight ratio performance and provides an immersive flight experience to pilots.
Specification
Item: Meteor75 Pro Brushless Whoop Quadcopter (1S HD Digital VTX)
Flight Time: 5:30 (Walksnail)/ 5:40 (HDZero)
Camera Adjustable Angle: 0-40°
Motors: 1102 22000KV Motor
Battery: BT2.0 550mAh 1S Battery
Frame: Meteor75 Pro Brushless Whoop Frame
Propellers: Gemfan 45mm 3-Blade Propellers
Canopy: BETAFPV Micro Canopy Lite
Weight Without Battery: 35.77g (Walksnail)/34.87g (HDZero)
Receiver: Serial ELRS 2.4G/SPI Frsky/TBS
FC&ESC: F4 1S 5A FC (Serial ELRS 2.4G) V2.0/F4 1S 5A FC (SPI Frsky) V3.0
VTX Power Output: 350mW (Walksnail), 25mW/200mW (HDZero)
VTX: Walksnail Avatar HD Mini 1S Lite Kit/HDZero Whoop Lite Bundle
Camera: Wanlksnail Avatar Lite Camera/HDZero Nano Lite Camera
FAQ
Download the FC firmware and CLI dump file for Walksnail and HDZero version.
Click to download the manual for Walksnail Avatar HD Mini 1S Lite Kit.
Click to download the manual for HDZero Whoop Lite Bundle.
Includes
1x BetaFPV BNF Meteor75 Pro 1S Brushless Whoop w/ HDZero & Nano Lite Cam (BT2.0) - Choose Your Receiver
2x BT2.0 550mAh 1S Battery
1x Type-C USB Cable
1x BT2.0 Battery Charger and Voltage Tester
4x 45mm 3-Blade Props (1.5mm Shaft)
1x Screwdriver
1x VTX USB Cable (Walksnail or HDZero Version)
1x Pack of Screws
All products with batteries must be shipped by a ground shipping method.
Check out the this BNF Meteor75 Pro HD 1S Brushless Whoop from BETAFPV. This quad is impressive with its clean aesthetic and its down right power performance. BETAFPV wants you to know this is the largest 1S digital whoop you can get today. This BNF will feature a F4 1S 5A FC, with 1102 22000Kv motors and ideally you would want a 550mAh 1S Battery to use with this quad. With this frame, you will get to see a more roomier battery slot for ease of use, as well as to able to accommodate a bigger battery.
Note: The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP.
Make sure to check out our other Pre-Built quads and the rest of our BetaFPV selection!
Features
The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks.
It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.
Micro Canopy Lite has an adjustable camera lens of 0-40°. This new canopy weighs only 1.1g, which is very suitable for HD digital VTX drone, and the open design makes the electronics cooler better.
Equipped with F4 1S 5A flight controller (Serial ELRS 2.4G or SPI Frsky). The ELRS 2.4G RX version comes with the default ELRS V2.0 firmware and supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware. The SPI Frsky version can be also used as the PNP version to connect external receiver due to the two UART ports on the board.
The various colors of the spare parts including the Meteor75 Pro frame and Micro
Reserve two UART ports on F4 1S 5A FC(SPI Frsky) V3.0 board. The Frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it.
Ultralight weight for Meteor75 Pro HD 35.77g (Walksnail)/ 34.87g (HDZero), this largest 1S drone combined with Walksnail or HDZero HD digital VTX system gives pilots an immersive flight experience and impactful visuals.
HD Digital VTX System
The Walksnail Avatar HD Mini 1S Lite uses H.265 high-efficiency video coding, an industry-leading technology, providing 1080P/60FPS image recording with 22ms ultra-low latency. It is specially designed for 3.1-5V power input and 7.8g lightweight, compatible with 1S whoop drone. Built-in 8 GB storage, this VTX has the capability of recording HD video without interference from capacity and exporting video by USB cable. Besides, with Canvas Mode, Betaflight full OSD display is supported and can be adjusted easily by remote control.
Note: Please make sure that the battery voltage must be 3.1V at least when flying, otherwise, the HD digital VTX would stop working.
Flight Controller
The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor75 HD. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. The ESC on the new board is powered by BB51 hardware in place of BB21. Last but not least, we update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.
Meteor75 Pro HD (ELRS)
Meteor75 Pro HD (Frsky, PNP, TBS)
FC Inside
F4 1S 5A FC (Serial ELRS 2.4G) V2.0
F4 1S 5A FC (SPI Frsky) V3.0
Gyro
BMI270
BMI270
FC Firmware
BETAFPVF411
BETAFPVF411RX
UART Port
One UART Port
Two UART Ports
External RX
Not Supported
Supported
Note: Pay attention, ONLY the newest Betaflight firmware 4.3.1 start to support this BMI270 gyrometer. Please check the below link to download the firmware and CLI dump file. If you update the 4.3.1 firmware from Betaflight official site, please flash the CLI dump file for Meteor75 HD.
Micro Canopy Lite
Micro Canopy Lite is specially designed to be compatible with HD digital VTX and has an adjustable camera lens of 0-40°. By using the new Micro Canopy Lite, the weight of the drone is reduced, which in turn can improve flight performance and increase flight time. The open design helps to dissipate heat more effectively, reducing the risk of damage to the VTX or other electronic components inside the drone.
Endurance Boosting Battery
With the new BT2.0 550mAh 1S battery, Meteor75 Pro HD ensures more flight time up to 5:30 (Walksnail)/5:40 (HDZero) so that pilots can less worry about the battery. What's more, it has a discharge of 40C (continuous) and 80C (burst), bringing a robust flight experience to pilots.
Meteor HD Series
BETAFPV has been optimizing and upgrading the Meteor series for better performance. The Meteor HD Series whoop drones including Meteor75 1S HD, and Meteor85 2S HD with Walksnail or HDZero HD digital VTX system aim to provide pilots with an immersive flight experience for FPV racing and high-definition images.
Meteor75 Pro Frame
Meteor75 Pro frame is the largest 1S whoop frame with 45mm propellers currently and comes with more features. The frame features a roomier battery slot for more battery choices such as BT2.0 550mAh battery. The motor holder is using a triangle bilateral stretch structure, giving pilots a more durable and smoother flight experience. In addition, the Meteor75 Pro frame offers seven colors for options, which pilots should purchase separately.
Powerful 1S Drone Combo
Even carrying the HD digital VTX system, Meteor75 Pro HD still performs well in power and speed thanks to its upgraded frame that is suitable for 45mm props, allowing it to be the largest 1S power whoop drone with greater thrust and lift. Fit out with 1102 22000KV motors and BT2.0 550mAh 1S battery, this 1S drone combo has an excellent thrust-to-weight ratio performance and provides an immersive flight experience to pilots.
Specification
Item: Meteor75 Pro Brushless Whoop Quadcopter (1S HD Digital VTX)
Flight Time: 5:30 (Walksnail)/ 5:40 (HDZero)
Camera Adjustable Angle: 0-40°
Motors: 1102 22000KV Motor
Battery: BT2.0 550mAh 1S Battery
Frame: Meteor75 Pro Brushless Whoop Frame
Propellers: Gemfan 45mm 3-Blade Propellers
Canopy: BETAFPV Micro Canopy Lite
Weight Without Battery: 35.77g (Walksnail)/34.87g (HDZero)
Receiver: Serial ELRS 2.4G/SPI Frsky/TBS
FC&ESC: F4 1S 5A FC (Serial ELRS 2.4G) V2.0/F4 1S 5A FC (SPI Frsky) V3.0
VTX Power Output: 350mW (Walksnail), 25mW/200mW (HDZero)
VTX: Walksnail Avatar HD Mini 1S Lite Kit/HDZero Whoop Lite Bundle
Camera: Wanlksnail Avatar Lite Camera/HDZero Nano Lite Camera
FAQ
Download the FC firmware and CLI dump file for Walksnail and HDZero version.
Click to download the manual for Walksnail Avatar HD Mini 1S Lite Kit.
Click to download the manual for HDZero Whoop Lite Bundle.
Includes
1x BetaFPV BNF Meteor75 Pro 1S Brushless Whoop w/ HDZero & Nano Lite Cam (BT2.0) - Choose Your Receiver
2x BT2.0 550mAh 1S Battery
1x Type-C USB Cable
1x BT2.0 Battery Charger and Voltage Tester
4x 45mm 3-Blade Props (1.5mm Shaft)
1x Screwdriver
1x VTX USB Cable (Walksnail or HDZero Version)
1x Pack of Screws
All products with batteries must be shipped by a ground shipping method.
Experience super clear and sharper images with the BETAFPV Meteor85 HD. Based on the newest Meteor85 (2022), it comes with Walksnail Avatar Mini HD VTX or HDZero Whoop Lite Bundle, bringing conspicuous images and exceptional visuals to your eyes and capturing details that make the footage look as exciting as the flight. Together with 1103 11000KV motors and GF2015 2-blade props that feature strong propulsion, it gives pilots powerful and impressive results. Enjoy an immersive flight experience for freestyle tricks outdoors, and get the perfect shots with the new HD VTX system.
Features
Lightweight for 52.57g (Walksnail) and 48.30g (HDZero) whoop drone, this new 2S whoop drone with Walksnail HD VTX or HDZero VTX gives pilots an immersive flight experience and impactful visuals.
New frame with the low profile of the battery slot, the drone's gravity center is reduced and improved the sense of compactness, perfectly enhancing the trust-to-weight ratio. It is durable and light enough, giving pilots a good balance of weight and a nice punch on a 2S battery.
Featuring an upgraded propulsion system and a larger capacity battery. Meteor85 uses GF 2015 2-Blade props with 1103 11000KV motors, which gives full play to the efficiency of the power. Combined with a 450mAh 2S battery, Metero85 can fly up to 6 mins (HDZero) and 5 mins (Walksnail).
Adopted with injection molding technique, this canopy is 2.50g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
Reserve solder pads for the external receivers with UART1 and UART2 on F4 1-2S 12A FC board. The SPI ELRS 2.4G and SPI Frsky version can be used as PNP quadcopter.
Specifications
Frame: Meteor85 Brushless Whoop Frame
Motors: 1103 11000KV Motors
Props: Gemfan 2015 2-Blade Propellers
Receiver: ELRS 2.4G
VTX: 1S Walksnail Avatar Mini HD VTX or HDZero Whoop
Battery: 450mAh 2S Battery
Weight Without Battery: 52.57g (Walksnail)/48.30g (HDZero)
Flight Time: 6 mins (HDZero)/5 mins (Walksnail)
Camera Adjustable Angle: 0-45°
FC&ESC: F4 1-2S 12A FC (2022)
VTX Power Output: 350mW (Walksnail), 25mW/200mW (HDZero)
Camera: Walksnail Avatar Nano Camera/HDZero Nano Lite Camera
Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM
F4 1S 12A AIO FC
CPU: STM32F411CEU6 (100MHZ )
Gyro: Six-Axis BMI270 (SPI connection)
SPI ELRS 2.4G Receiver
Dimensions: 26mm x 26mm (suitable for whoop pattern mounting hole)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Firmware version: betaflight_4.3.1_BETAFPVF4SX1280 (ELRS)
Motor Pin Connector: 1.25mm Header Pins
USB Port: SH1.0 4-Pin
Weight: 4.74 g (without power cable and BT2.0 connector)
1S 12A ESC
Input voltage: 1S-2S
Built-in ESC with 12A continuous and peak 25A current
ESC firmware: C_X_30_48_V0.18.1.hex for Bluejay BB51 hardware
Includes
1x Meteor85 Brushless Whoop Quadcopter (2S HD Digital VTX) ELRS 2.4G
1x 450mAh 2S 45C Battery
1x Type-C to SH1.0 Adapter
1x SH1.0 Cable
3x Decorative Parts
4x Gemfan 2015 2-Blade Propellers
1x Walksnail VTX USB Cable (For Walksnail Version)
1x HDZero VTX Converter Cable (For HDZero Version)
1x Pack of Screws
1x User Manual
BT2.0 Connector - the most significant revolution in 1S Whoop Drone!
BT2.0 1S Whoop Connector is an option for you to modify your existing batteries and drones which use the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless whoop drone, and display the perfect performance of your drone with BT2.0 300mAh 1S battery.Check out all our pigtails, connectors and adapters as well as our range of BetaFPV gear!
Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell'video- Proof that BT2.0 connector is better than PH 2.0
Features
BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings more perfect flight experience when you fly the 1S brushless whoop drone.
By using the BT2.0 connector, it can solve the problem of voltage sag, the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.
With the light and customized 22AWG wire, it will make the drone more lighter. The wire uses US standard core 0.08mm*60. The diameter of silicone outer layer is only 1.5mm, which is 0.2mm thinner than 22AWG standard wire.
There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time (about 2minutes) with BT2.0 connector.
Specifications
Size: Male Connector - 6.0*4.2*10.5mm / Female Connector - 6.0*4.2*8.3mm
Weight: Male Connector- 0.34g/PCS / Female Connector - 0.24g/PCS
Note: The terminal molded case identifies the positive and negative poles, and must be welded according to the instructions.
Includes
5x BetaFPV BT2.0 1S Whoop Connector Male
5x BetaFPV BT2.0 1S Whoop Connector Female
Here is Mr ShutterBug'vedio to show you the way of replacing connectors safely.
BT2.0 Connector - the most significant revolution in 1S Whoop Drone!
BT2.0 1S whoop cable pigtail is an option for you to modify your drone or your 1S FC board which is with the PH2.0 connector. With the 1.0mm banana connectors, it can support 9A continuous current and 15A burst. Makes the best potential of brushless whoop drone, and display the perfect performance of your drone with BT2.0 300mAh 1S battery.Check out all our pigtails, connectors and adapters as well as our range of BetaFPV gear!
Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell'video- Proof that BT2.0 connector is better than PH 2.0
Features
BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings more perfect flight experience when you fly the 1S brushless whoop drone.
By using the BT2.0 connector, it can solve the problem of voltage sag, the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.
With the light and customized 22AWG wire, it will make the drone more lighter. The wire uses US standard core 0.08mm*60. The diameter of silicone outer layer is only 1.5mm, which is 0.2mm thinner than 22AWG standard wire.
There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time (about 2minutes) with BT2.0 connector.
Specifications
Item: BT2.0 1S Whoop Cable Pigtail
Wire Type: 22AWG
Connect: BT2.0 Male Connector
Length: 55mm (Not included the plug)
Weight: 0.91g/pc
Includes
6x BetaFPV BT2.0 1S Whoop Pigtail Cable
How to re-solder your FC pigtail
BT2.0 1S Whoop Cable Pigtail is composed of blue wire and white wire. The blue wire is the positive pole(+), the white wire is the negative pole(-). When you resolder your board, please pay attention to the connection method.
Here is Mr ShutterBug'vedio to show you the way of replacing connectors safely.
BT2.0 Connector - the most significant revolution in 1S Whoop Drone!
To provide our customers with greatest convenience, we specially made this adapter cable, this adapter cable will be a perfect solution when you want to charge the BT2.0 300 mAh 1S battery with the PH 2.0 charger. We also carry BT2.0 pigtails and connectors for converting your whoops!Check out all our pigtails, connectors and adapters as well as our range of BetaFPV gear!
Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell'video- Proof that BT2.0 connector is better than PH 2.0
Features
Conversion from PH2.0 connector to BT2.0 connector can be achieved with just one Adapter Cable, which convenient for charge the BT 2.0 battery with the PH 2.0 charger.
Specifications
Item: BT2.0-PH2.0 Adapter Cable
Length: 55mm (Not included the plug)
Weight: 1.07g(1 pcs)
Wire Type: 22AWG
Input Port: PH2.0 male connector（connect PH2.0 charger）
Output Port: BT2.0 female connector（connect BT2.0 battery）
Note: Blue represents the positive pole (+); White represents the negative pole(-)
Includes
6x BetaFPV BT2.0 to PH2.0 1S Whoop Adapter Cable
The BetaFPV F4 1S 12A AIO Brushless Flight Controller V2.2 is the default FC for Cetus X brushless whoop quadcopter, also great for 85mm whoop drones like Meteor85 and 3" toothpick drones like HX115 SE Toothpick Drone and HX115 LR Toothpick Drone. BetaFPV updated the FC to V2.2 with BMI270 gyro and BB51 ESC hardware in place of ICM20689 gyro and BB21 ESC hardware.
Check out all our whoop flight controllers, and all our BetaFPV gear!
Specifications
CPU: STM32F411CEU6 ( 100MHZ )
Six-Axis: BMI270
Built-in Receiver: SPI ExpressLRS 2.4G / Frsky SPI
Receiver antenna: Line antenna
Size: 30mm x 30mm, fully mounting pattern compatible with the whoop frame in the current market
Firmware version: betaflight_4.3.1_BETAFPVF4SX1280 (ELRS)
OSD: Built-in BetaFlight OSD
Recommend VTX:
Power Cable: 55mm, with BT2.0 connector
Weight: 3.6g (Without power cable included)
Power supply: 1S-2S
Current: 12A continuous and peak 25A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: C_X_30_REV16_7.hex for BB51 BLHeli_S hardware
Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Includes
1x F4 1S 12A AIO FC
Wiring Diagram
The ultralight F4 1S 5A AIO Brushless Flight Controller is back in stock with new and upgraded features. Compared to the previous version, the new board uses Serial ExpressLRS 2.4G instead of SPI ELRS 2.4G so that it can support ExpressLRS V3.0 and also has a Frsky RX version to choose from. We updated the FC with high-quality BMI270 gyro and BB51 ESC hardware. In addition, this new board supports the Betaflight Blackbox function.
Check out all our whoop flight controllers, and all our BetaFPV gear!
Specifications
CPU: STM32F411CEU6 ( 100MHZ )
Six-Axis: BMI270
Built-in Receiver: Serial ExpressLRS 2.4G / Frsky SPI
Receiver antenna: Line antenna
Size: 30mm x 30mm, fully mounting pattern compatible with the whoop frame in the current market
Firmware version: betaflight_4.3.1_BETAFPVF411
OSD: Built-in BetaFlight OSD
Recommend VTX:
Power Cable: 55mm, with BT2.0 connector
Weight: 3.6g (Without power cable included)
Power supply: 1S
Current: 5A continuous and peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: A_X_5_.HEX for BB51 BLHeli_S hardware
Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Includes
1x BetaFPV F4 1S 5A Toothpick/Whoop Flight Controller - Choose Version
4x M1.2x4mm Screws
4x M1.4x5mm Screws
4x Anti-vibration Rubber Dampers
Wiring Diagram
The BetaFPV V1 F4 2-3S AIO is the perfect choice for modern Whoop/Toothpick builds. Featuring an F4 AIO Flight Controller and 20A 4-in-1 ESC with ELRS serial, this setup guarantees smooth, consistent performance. It features a dual BEC solution that delivers stable power outputs of 9V@2A for DJI O3 and 5V@3A for external devices. With a 20A ESC, it enables agile flight and increases dynamic. And connector for DJI O3 HD VTX and USB port for easy installation and maintenance. Ideal for HD VTX whoop enthusiasts, offering a heightened level of professionalism and convenience with this FC option.
Note: If you use the F4 2-3S 20A AIO FC V1, the serial port of the SBUS receiver is UART5Check out all our whoop flight controllers, and all our BetaFPV gear!
Features
Designed for HD VTX, it features a dual 9V@2A for DJI O3 and 5V@3A for external device BEC solution to prevent screen blackout on the DJI O3 due to low voltage during throttle increase.
It includes a new DJI O3 6-pin PMU for easy installation without soldering, reducing assembly complexity. Newbie friendly.
The power range of 2-3S provides increased thrust and improved control with a 20A ESC featuring a single NMOS for continuous current capability.
The upgraded onboard receiver allows selective power cutoff for saving power and offers additional UART TX3 and RX3 ports for connecting the external device.
The redesigned solder pad layout ensures larger, more secure pads for easy and reliable soldering, while the relocated USB port at the rear facilitates computer tuning.
It features an STM32F405RGT6 chip, Integrate Serial ELRS 2.4G receiver, 16M black box, barometer, current meter, reserve 3 complete serial ports and a standard SBUS, support GPS, HD VTX, external receiver, and other equipment.
F4 2-3S 20A AIO FC V1 also has extended the USB port to the end for easier parameter adjustment and wiring. And a new DJI O3 6-pin PMU has been added for convenient installation and maintenance.FAQPower cutoff: Removing the chip bead disconnects the power supply, and to reuse the onboard ELRS receiver, soldering the solder pads together restores power.UART3 release: Removing two resistors on the solder pads releases UART3. The left side is TX3, and the right side is RX3. To reconnect, solder the solder pads together when reusing the onboard ELRS receiver.Voltage Switch: The HD VTX connector defaults to 9V. The chip bead is soldered between the 9V pad and the middle pad. To use WalkSnail Avatar HD mini 1s and Lite, please ensure the power supply voltage is 5V. Remove the chip bead first from the 9V pad and solder it between the middle pad and the 5V pad. Alternatively, you can use solder instead the chip bead to switch between the 5V and 9V pads.Motor choice: Avoid selecting motors with excessively high KV ratings, as motors above 20,000KV are prone to burn.Betaflight Firmware and CLIFC firmware: Betaflight_4.4.1_BETAFVF405Download the firmware and CLI dump fileReference link:https://github.com/betaflight/betaflight/releases/tag/4.4.1ESC FirmwareWith BB51 ESC solution, F4 2-3S 20A AIO FC V1 is based on BLHeliSuite16714903 with Bluejay ESC firmware, it supports bidirectional D-shot and RPM filtering in Betaflight, offers 24KHz, 48KHz, and 96KHz fixed PWM frequency for options, and custom start-up melodies. F4 2-3S 20A AIO FC V1 default factory setting is 48KHz and it doesn’t recommend upgrading the 96KHz, or it might cause an error in the motor idle setting, not spinning when disarmed.DO NOT flash the firmware with a shorter interval, otherwise, there will be a certain chance of stalling and burning the flight controller.ESC-Configurator: https://preview.esc-configurator.com/Download BLHeliSuite16714903Download the Bluejay ESC firmware. Please choose C_X_70.HEXConnecting External DevicesPlease note that the board reserves two serial ports and a standard SBUS port, which is available for the external CRSF protocol receiver or GPS module, and SBUS protocol receiver. You can refer to the below picture.
Specifications
Weight: 5.58g (without motor connectors and power cable), 5.92g (with motor connectors)
Mounting Hole Size: 26mm x 26mm
CPU*: STM32F405RGT6 (168MHz)
Six-Axis: ICM42688P (SPI connection)
RX: Serial ELRS 2.4G Receiver
RX firmware version: BETAFPV AIO 2400 RX ELRS V2.5.2
Antenna: Enameled wire
Blackbox Memory: 16MB
Sensor: Barometer(BMP280), Voltage&Current
5V BEC*: 5V 3A@8V supply
9V BEC*: 9V 2A@8V supply
USB Port: SH1.0 4-Pin
Built-in ESC with 20A continuous and peak 25A current
ESC input voltage: 2-3S
FC firmfware version: Betaflight_4.4.1_BETAFPVF405
ESC firmware: C_X_70_48_V0.19.2.hex for BB51 Bluejay hardware
Signal support: D-shot300, D-shot600
Includes
1x BetaFPV V1 F4 2-3S AIO Whoop/Toothpick Flight Controller (w/ 20A 8Bit 4in1 ESC) - ELRS Serial
Wiring Diagram
All products with batteries must be shipped by a ground shipping method.
The Beta FPV LiteRadio 3 Radio Transmitter is the newest remote control in the LiteRadio series. This transmitter features an ergonomically designed handle and has superb performance in its working time and newly updated gimbals. Besides, this version supports BETAFPV Configurator which is a utility designed to simply update, configure, and tune the radio controller.
Check out our RC Transmitters and all our BetaFPV products!
Features
8 channels in total
USB Joystick support for most practice simulators
Nano module bay for external TX module
Newly designed joystick gimbal for longer usage life
Support BETAFPV Configurator for updating, configuring, and tuning
Built-in 2000mAh battery and USB charge supported
Specifications
Frequency Range: 2.4GHz
Channels: 8
Support Protocol: Futaba S-FHSS/Frsky FCC D16/Frsky LBT D16/Frsky D8 or ExpressLRS 2.4G
Power: ELRS version 25mW/50mW/100mW, Frsky version 100mW
Support USB Charging / Firmware Update: Yes
LED Light: Green-Power On / Red-Warning if the voltage is lower than 3.5V / Blue-Normal
Battery: 1S 2000mAh
Charging Connector: USB 3.0 Type-C
Includes
1x BetaFPV Lite Radio 3 2.4GHz RC Transmitter
All products with batteries must be shipped by a ground shipping method.
After the latest round of beta testing, the LiteRadio 2 SE is back to the market with huge improvements. This pint size FRSKY radio is powered by OpenTX firmware and can toggle between FRSKY D16 and D8 protocols. Real gimbals provide the tactile feedback of a pricier radio and USB connectivity can be used to play FPV simulators on a computer. The LiteRadio 2 SE is a great option for anyone looking for a lower cost radio with some great features.
Some new improvements include...
Built-in 1000 mAh 1S battery, LiteRadio 2 SE increases the endurance to 8 hours.
Updates with BETAFPV self-developed LiteRadio System. Pilots can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter.
Supports Frsky D8, Frsky D16 FCC and Frsky D16 LBT mode via the radio transmitter.
Comes with 100mW transmitting power, LiteRadio 2 SE brings a wider operating range.
Check out our RC Transmitters, our FrSky Products, and all our BetaFPV products!
This radio does not support newer FrSky receiver firmware.
Features
LiteRadio 2 SE upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter, which is more convenient for the beginner racer to operate.
Equipped with a built-in 1000 mAh 1S battery, LiteRadio 2 SE can use up to 8 hours, bringing an excellent endurance performance.
Comes with a built-in charging module, LiteRadio 2 SE can support USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged, the blue light will flash slowly.
Compared with the LiteRadio 2, LiteRadio 2 SE has a larger transmitting power which can reach 100mW, bringing a wider operating range.
Adopted the rubber coat, LiteRadio 2 SE is ergonomic and has the shape of a gaming controller. It's comfortable to hold, and the anti-slip texture on the handles allows for a solid grip.
This radio transmitter acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE.
Specifications
Frequency Range: 2.4GHz (2403MHz-2447MHz)
2.4G System: NRF24L01 or CC2500
Channel: 8
Support Protocol: Bayang / Futaba S-FHSS / Frsky D16 FCC/ Frsky D16 LBT/ Frsky D8
Power: ≤100mw
Adapted Drone Type: Multirotor
Support USB Charging / Firmware Update
Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration
LED Light: Green-Power On / Red-Warning / Blue-Normal
Battery: Built-in 1000mAh 1S Battery
Charging Connector: Type-C
Includes
1x BetaFPV LiteRadio 2 SE RC Transmitter 2.4GHz - FRSKY D8/D16
The LiteRadio 3 Pro Radio Transmitter is an open-source radio remote control that supports the EdgeTX system. It comes with the hall gimbals, featuring four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel. The OLED display screen on the top of the transmitter brings visually instant data and a controlling interface to users. What's more, an alternative external nano TX module make it a multi-protocol transmitter.
Check out our RC Transmitters and all our BetaFPV products!
Features
Hall gimbals features four precision bearings, adjustable spring tension, and ergonomic stick ends for an unparalleled feel.
Built-in 2000mAh 1S battery, LiteRadio 3 Pro can work up to 15 hours without an external module, bringing an excellent endurance performance.
A 1.3-inch OLED display screen is newly installed. Controlled by two 5D buttons and settings are easy to be adjusted directly from the display screen.
There is also a nano bay for an external TX module, it supports many popular modules in the market and meets all the protocols such as MULTI, CRSF, PPM, XJT, DSM2, R9M, etc.
Specifications
Channels: 8
Gimbals: Hall Sensor
Frequency Range: 2.4GHz
Antenna: Internal Antenna
RF Output Power: 50mW, 100mW, 250mW (ELRS 2.4G) / 100mW CC2500
Screen: 1.3 inch OLED display screen
Protocol: ExpressLRS 2.4G or CC2500
Battery: Built-in 2000mAh 1S Battery
Operating system: EdgeTX
Port: Type-C USB 3.0 port / 3.5mm Audio port
USB Support: Most Practice Simulator / USB charging / Firmware update / Passthrough (ELRS 2.4G)
Includes
1x BetaFPV LiteRadio 3 Pro RC Transmitter
1x User Manual
2x Joystick Protective Covers
Spare replacement part for the BetaFPV Meteor65 Whoop.
Check out all our Meteor65 parts & accessories, the rest of our whoop frames & accessories and all our BetaFPV gear!
Features
Compared to previous 65mm brushless frames, with the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness.
Meteor65 1S brushless frame’s motor mounting position uses triangle bilateral stretch structure, makes frame more aesthetic. It provides you more durable and smoother flight experience.
The ultra-light and durable frame is PP material only 3.14g, which is one of the lightest frames with 26mm*26mm FC mounting columns can match whoop style flight controller.
The material of 31mm 3-blade props is PC plastic with the 1.0mm shaft inner diameter. Suitable for 0603 and 080X series brushless motors.
Specifications
Item: Meteor65 frame
Material: PP
Size: 65mm
Weight: 3.14/pc
Color: Transparent/Blue/Black/Green/Pink/Orange
Motor mounting hole: For 0603 motor and 080X Series Motors
FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern
Upgrade
With the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness.
Using triangle bilateral stretch structure, makes frame more aesthetic.
Lightest frame weights 3.14g only, with 26mm*26mm FC mounting columns can match whoop style flight controller.
Includes
1x BetaFPV Meteor65 Whoop Frame
Be bold and brave with the BetaFPV Meteor75 Pro Whoop Frame! Choose from seven vibrant colors. Meteor75 Pro is durable, lightweight (7.73g) and the motor holder is strong for stable flying. Uses 1102/0802SE Triangle mount motors and accommodates a larger 1S batteries. Perfect for 45mm props; increases thrust for 1S whoops, with HD digital VTX.
Check out all our whoop frames & accessories and all our BetaFPV gear!
Features
Meteor75 Pro Brushless Whoop Frame is durable enough with a lightweight of 7.73g.
The motor holder utilizes a triangle bilateral stretch structure, extremely strong for motor installation. So flying is stable when the quadcopter is at high speed. Recommend motors with triangle mount like 1102, 0802 Brushless Motors.
The battery slot is bigger. Pilots can use a larger 1S battery with more capacity. Recommend BETAFPV 450mAh 1S Battery
The frame is perfect for 45mm propellers. It greatly enhances the thrust for 1S whoop, especially when carrying HD digital VTX.
Specification
Item: Meteor75 Pro Brushless Whoop Frame
Material: PP
Wheelbase: 80.8mm
Weight: 7.73g
Color: Black/Blue/Cyan/Yellow/Orange/White/Red
Motor mounting hole: 3-M1.4-φ6.6mm, 1102, 0802 Brushless Motors
FC mounting hole: 26x26mm, F4 1S 5A FC
Includes
1x BetaFPV Meteor75 Pro Whoop Frame - Choose Your Color
Brand new lightweight 75mm 1S brushless frame for Meteor75 Brushless Whoop Quadcopter is released now! This frame is ultralight only 5.68g, but it still durable.
Check out all our whoop frames & accessories and all our BetaFPV gear!
Features
Meteor75 frame is ultralight only 5.68g, light but durable enough.
The motor mount position uses a quadrilateral stretch structure, the frame is more durable and stable.
The height of the frame has been adjusted, the lowest point of the frame is the motor position, the battery can be protected while the drone is landing. It also increased the height of the frame loop to protect the propeller better.
Designed two different motor mounting holes that support 0603, 0802 and 1102 brushless motors at the same time.
With a 26mm*26mm FC mounting columns can match whoop style FC.
Specification
Material: Plastic
Size: 75mm
Weight: 5.68/pc
Motor mounting hole: For 0603 motor, 1102 Series Motors and 0802 Series Motors
FC mounting hole: 26mm x 26mm, fully compatible with whoop style FC board mounting pattern
Includes
1x BetaFPV Meteor75 Whoop Frame
To elevate the flying experience, DIY enthusiasts have consistently prioritized the reduction of weight for the attainment of ultra-light structure for 1S whoop drones. Consequently, we have devised an exceedingly light Micro Air Canopy, weighing a mere 0.74g, that not only facilitates camera angle adjustment from 25° to 50° but also has antenna mounts, incorporated at the tail. If your goal is to optimize canopy functionality while minimizing weight to obtain a Sub18g 65mm Whoop, this option stands as the definitive choice.
Check out all our whoop frames & accessories and our BetaFPV gear!
Features
With a mere weight of 0.74g, the canopy boasts a simplistic yet durable structure, ensuring effortless installation. It stands as the premier pick for ultra-light small whoop drones.
This hollow-out design reshape the installation space and accommodates an assortment of Micro and Nano-sized Analog and HD Digital cameras that are widely sought after in the market.
Positioned at the canopy's tail, reserved 4 antenna mounts enable seamless adjustment of the camera angle, offering a versatile range spanning from 25° to 50°, capturing the optimal image.
More Compatibility
Micro Air Canopy is the ideal option for constructing or enhancing ultra-light whoop drones featuring HD Digital VTX or Analog VTX, owing to its exceptional compatibility. This hollow-out design reshape the installation space and accommodates an assortment of Micro and Nano Analog and HD Digital cameras. So Micro Air Canopy provides full support for the C03 Camera, C02 Camera, Avatar HD Lite Camera, ANT Lite Camera, and other cameras possessing a lens diameter of 9-10mm.
Infinite Personalization
We provide diverse color options for the Micro Air Canopy, enabling greater freedom for personality. This allows for aligning or color clashing the canopy color with your drone's theme. And equipped with our various colors of Meteor65 Air Brushless Whoop Frame adds flexibility, and agility during flight. Your drone will capture people's attention and showcase your unique personality and creativity.
Specifications
Item: Micro Air Canopy
Material: PP
Tilt: 25°~50° (Adjustable)
Weight: 0.74g (Including one Camera Fixed Screw)
Color: Black, White, Transparent White, Transparent Blue, Transparent Purple, Transparent Green
Includes
1x BetaFPV Micro Air Whoop Canopy - Choose Your Color
This micro canopy is specially designed for Walksnail Avatar Nano camera, Runcam Nano Lite Camera, or most 14mm nano cameras, supporting an adjustable camera lens of 0-45°. It features high compatibility for both HD Digital VTX and Analog VTX like M03 Analog VTX.
Features
The canopy is designed with camera mounting holes for an adjustable camera lens of 0-45°. It is suitable for Walksnail Avatar Nano camera, Runcam Nano Lite Camera, or most 14mm nano cameras.
Lightweight and two colors for options (Black/Blue). Using it with Meteor Series colorful frame will be more attractive. Recommend frames for Meteor65 Pro, Meteor75, and Meteor85
Adopt with injection molding technique, this canopy is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
Unique design with three decorative parts like a knight, the drone flies in the air like a scientific spaceship cruising, making it very cool and special. Also, the decorative parts are detachable for better heat dissipation.
Mounting Diagram
The picture below is the diagram for this canopy. This canopy is applied to 1S Walksnail Avatar Mini HD VTX, HDZero Whoop Lite Bundle, M03 Analog VTX, or most 14mm nano cameras. Other brands' VTXs with similar sizes are available to be mounted on this canopy.
Specification
Item: Micro Canopy for HD Camera
Material: PP
Tilt: 0-45°
Weight: 2.50g (without decorations), 3.28g (with decorations)
Color: Black/Blue
Adapted VTX: 1S Walksnail Avatar Mini HD VTX, HDZero Whoop Lite Bundle, M03 25-350mW 5.8G VTX
Adapted FPV Camera: Walksnail Avatar Nano Camera, Runcam Nano Lite Camera, or most 14mm nano cameras
Adapted Frame: Meteor65 Pro/Meteor75/Meteor85
Includes
1x Micro Canopy for HD Camera (Black/Blue)
3x Decorative Parts
3x M1.4x3 Screws
8x M1.4x5 Screws
3x M2x4 Screws
Note: The decorative parts for both Micro Canopy for HD Camera and Canopy for Micro Camera 2022 are unavailable in common use even though they have a similar appearance.
Pavo Pico is the tiniest 2S Sub100g DJI O3 Cinewhoop frame, working with other popular HD digital VTX such as Walksnail Avatar Pro Kit, Vista Kit, etc. After testing with pilots, this frame has been upgraded by lowering the battery slot height and adding filters and camera protection parts. These updates enhance the camera and HD digital VTX, to give pilots an unparalleled flying experience.
The Pavo Pico is an all-new HD 81mm cinewhoop with 45mm props that is designed to be the smallest 2S-3S, sub100g build.
Check out the rest of our micro frames and the rest of our BetaFPV gear!
Features
HD digital VTX bracket made of lightweight and tough injection-molded PP material with an adjusted structure to prevent HD VTX displacement or loss after the crash.
Incorporating an angle-limited lens protection print and DJI O3 series filters, It is recommended to purchase, which can increase safety and improve visual quality.
The Rubber Damper Vibration damping design reduces low-frequency vibrations and is used with GyroFlow stabilization software for a stable and clear camera image during high-speed flight.
To accommodate a wider range of battery sizes, the main body of the frame can be trimmed through DIY methods. Additionally, larger batteries can be installed by using battery straps or printed components.
The DJI O3 can be directly installed, while Avatar and Vista require a 20x20 mounting plate and screws (included) for fixation. The naked frame is suitable for users who DIY refit and assemble the HD VTX by themselves.
We offer a wider range of colors for the Pavo Pico frames, giving you even more options to choose from. Whether you prefer a bold and bright hue or a more subdued shade, we have a color that will suit your style. You can choose your favorite color or collect them all to create your own unique mix-and-match cinewhoop.
Pavo Pico Frame Kit
We used ultra-light PP material to make the HD VTX mounting bracket, increasing its toughness. The antenna fixing slot and frame have been fused to reduce damage risk, while the camera's installation height has been lowered with a protective printed part to limit its movable angle to within 30°. Additionally, an O3 filter can be used to protect the lens and enhance image quality. We have incorporated a unique rubber damper vibration-damping design, used with GyroFlow stabilization software, which greatly enhances safety and ensures a smooth, HD image output. When you screw the die-cast screws, please DO NOT screw them too tight to leave room for rubber dampers to absorb vibration. It may cause jello in the video footage.
Click to watch the installation guide video for DJI O3 Air Unit on Pavo Pico.
And The whoop quadcopter package includes the DJI O3 HD Digital VTX Antenna Mount.
DJI O3 Vibration Problem
To tackle the challenge of vibration on many whoop drones, the DJI O3 unit is mounted on a carbon fiber plate with 4 rubber dampers. This innovative design ensures peak performance and perfect stability.
Troubleshooting
To improve video quality when recording with DJI O3 HD VTX, turn off its electronic stabilization and use GyroFlow stabilization software.
When fixing the HD VTX bracket with M1.4*10 screws, ensure that the nut just touches the shock-absorbing ball.
The Jello effect may occur during the above installation due to 2 reasons:
The VTX bracket is over-tightened with the screw and the rubber dumper is totally deformed. To solve this, make sure that the screw is tightened just enough to touch the shock-absorbing ball and keep the ball and bracket loose.
If It is a large deformation of the frame or quadcopter blades, replace the frame or blades with larger vibrations if necessary.
Note: use acetate tape to bind motor wires and prevent them from drooping and interfering with the propeller's rotation.
Upgrade Low Profile Design
After collecting feedback through the BETA TEST, we lowered the height of the HD VTX mounting bracket and whoop duct from 60.6mm to 51.5mm and the battery compartment results in a more low profile on the cinewhoop.
Pilots can further customize their cinewhoop with DIY options such as battery straps or printable components, allowing for compatibility with a variety of battery sizes. This enables pilots to tailor and enhance their cinewhoop to meet their specific requirements and preferences. Steps as follow:
Specification
Item: Pavo Pico Brushless Whoop Frame
Material: PA12
Wheelbase: 80.8mm
Battery Slot Size: 16mmx12.7mm
Camera Installation Spacing: 19mm/20mm
Color: Black
Weight: 11.62g
Motor Mounting Hole Position: 3-M1.4-φ6.6mm
FC Pattern: 26×26mm, suitable for F4 1S 12A AIO Brushless FC V3
Includes
1x BetaFPV Pavo Pico HD 81mm Cinewhoop Frame (HD Digital Version) - Black
All batteries must be shipped by a ground shipping method.
Brush up on your FPV skills with the BetaFPV RTF Cetus FPV Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case. You have everything needed to get into FPV, including the LiteRadio 2 SE Transmitter, VR02 FPV Goggles, and the Cetus Whoop.
Easy to carry on and ready to fly. What are you waiting for?
Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad:
BetaFPV 1S 300mAh - BT2.0
Check out our other RTF combos, all our pre-built quads and our BetaFPV selection!
Features
3 Flight modes
Altitude hold and emergency landing functions
Storage case
FrSky D8 protocol drone and radio
Brushed drone, easy to fly
Specifications
Positioning system: Optical flow / Barometer / Laser
Height Positioning: Laser / Barometer
Angle Locating: Optical flow ( effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
Flight controller: Lite 1S Pro brushed FC
VTX: 25mW
Camera tilt degree: 25°
Camera: C01 FPV Micro Camera
Transmitter: Literadio2 SE Transmitter
TX mode: Mode 2 (Left stick throttle)
Goggles: VR02 Goggles
Motor: 716-19000KV Brushed motor
Propeller: 31mm 4-blade 0.8mm shaft hole
Takeoff weight: 35g(with battery)
Power system: 1S
Battery: BT2.0 300mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (Clear line of site)
Includes
1x Cetus Brushed Quadcopter
1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1x VR02 FPV Goggles
2x BT2.0 300mAh 1S Lipo Battery
1x BT2.0 Battery Charger and Voltage Tester
1x USB Charging Cable (Type-C)
1x Type-C Adapter
1x Prop Removal Tool
4x 31mm 4-Blade Props
1x Portable Storage Bag
User Manual
All batteries must be shipped by a ground shipping method.
The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles. It's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor.
Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad:
BetaFPV 1S 450mAh - BT2.0
Check out our other RTF combos, all our pre-built quads and our BetaFPV selection!
Features
The auxiliary flight function is greatly reducing the threshold of operating. This is the lightest key to open the door to advanced FPV.
Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. Pilots can achieve more FPV freestyle actions to train.
With the self-protection of emergency landing when out of control or in low battery, to ensure a more safe flight.
Made of PA12 material, the frame has an excellent impact resistance in drop & impact. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors.
All items needed for the flight are packed in an EVA portable storage bag. Better to protect and convenient to carry.
Specifications
BetaFPV LiteRadio 2
Frequency Range: 2.4GHz (2403MHz-2447MHz)
2.4G System: NRF24L01 or CC2500
Channel: 8
Support Protocol: Bayang / Futaba S-FHSS / Frsky D16 FCC/ Frsky D16 LBT/ Frsky D8
Power: ≤100mw
Adapted Drone Type: Multirotor
Support USB Charging / Firmware Update
Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration
LED Light: Green-Power On / Red-Warning / Blue-Normal
Battery: Built-in 1000mAh 1S Battery
Charging Connector: Type-C
BetaFPV VR02 Goggles
Screen Size: 4.3"
Screen Resolution: 800x480p
Screen Brightness: 300cd/m2
Field of View: 55°
Charging Port: USB-C
Input Voltage: 3.7V 500mA
Internal Battery: 3.7V 2000mAH
Dimensions: 143x126x86.3mm
Weight: 300g
BetaFPV RTF Cetus Pro
Positioning system: Optical flow / Barometer / Laser
Height Positioning: Laser / Barometer
Angle Locating: Optical flow ( effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
VTX: 25mW
Camera tilt degree: 25°
Camera: C02 FPV Micro Camera
Propeller: 40mm 3-blade 1.5mm shaft hole
Power system: 1S
Battery: BT2.0 450mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (Clear line of site)
Includes
1x Cetus Pro Brushless Quadcopter
1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1x VR02 FPV Goggles
2x BT2.0 450mAh 1S Lipo Battery
1x BT2.0 Battery Charger and Voltage Tester
1x USB Charging Cable (Type-C)
1x Type-C Adapter
1x Prop Removal Tool
1x Portable Storage Bag
All batteries must be shipped by a ground shipping method.
Whether you're a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level of flying FPV.
Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad:
BetaFPV 1S 300mAh - BT2.0
Check out our other RTF combos, all our pre-built quads, and our BetaFPV selection!
Features
Nothing quite beats the experience of flying Cetus X with an enhanced propulsion system, and longer radio and video transmission. With a very functional and potential remote controller and FPV goggles, pilots can unlock more accomplishments to the next level.
Two FC versions are offered for pilots. With the support of the Betaflight configurator, beginners can learn quadcopter configuration through the Betaflight FC version. For pilots who prefer the classical Cetus, the Cetus FC version with an altitude hold function is also coming soon.
Classical white design inherited from Cetus Series and made of PA12 material, the Cetus X frame has an excellent impact resistance in drop & impact and reduces the risk of damage, giving you more peace of mind.
The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots.
LiteRadio 3 reserves a nano bay that supports the external TX module for the compatibility of more quadcopters. And the VR03 FPV goggles which are newly added a Micro SD card slot to save the video with DVR recording, support most Analog VTXs in the market.
The quadcopter, radio transmitter, FPV goggles, and all of the accessories are packed in an EVA portable storage bag. It is convenient to carry outside and better to protect the equipment.
Powerful Propulsion System
Equipped with 1103 11000KV Brushless Motors and Gemfan 2020 4-blade props, the Cetus X Brushless Quadcopter delivers powerful propulsion, making it a 2S power whoop drone with some real punch to it. The whole quadcopter is light and durable enough, offering pilots a high-efficiency flight experience.
Recording Every Flight Moment
Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience.
Improved Video Transmission
Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. M04 25-450mW VTX features a lightweight and adjustable output power for long-distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, the C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with the C02 FPV camera.
LiteRadio 3 Radio Transmitter
This transmitter features an ergonomically designed handle and has superb performance in its working time, a newly updated gimbal. Besides, this version supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller. Experience the thrill of total immersion with unrivaled control and capture the world around you.
FPV Simulator Supported
First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time. Check out the Liftoff flying demonstration here. Download Liftoff here.
Various Modes, Accessible to All
Cetus X supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate turtle mode by LiteRadio 3 transmitter to flip it over and resume flying. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus X FPV Kit helps anyone fly confidently from day one.
BETAFPV Cetus Series
The BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, Cetus Series always satisfies customers' needs no matter new beginners or seasoned pilots.
Specification
Item: Cetus X FPV Kit
Weight: 55g
Wheelbase: 95mm
FC: F4 1S 12A FC
Motors: 1103 11000KV Motor
Props: Gemfan 2020 4-Blades Props
Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4)
Camera Adjustable Angle: 0°-40°
Receiver Protocol: ELRS 2.4G (Betaflight)/Frsky D8 (Cetus)
VTX: M04 25-400mW VTX
Quadcopter: Cetus X Brushless Quadcopter
Transmitter: LiteRadio 3 Radio Transmitter
Goggles: VR03 FPV Goggles
Battery: 2x BT2.0 450mAh 1S 30C Battery
Flight time: 5 mins
Includes
1x Cetus X Brushless Quadcopter (Betaflight Firmware, ELRS 2.4G Receiver)
1x LiteRadio 3 Transmitter (ELRS 2.4G)
1x BETAFPV VR03 FPV Goggles
4x BT2.0 450 mAh 1S Lipo Battery
1x BT2.0 Battery Charger and Voltage Tester
1x USB Charging Cable (Type-C)
1x Type-C to FC Adapter
1x Prop Removal Tool
4x Gemfan 2020 4-Blades Prop (Spare Set)
1x Portable Storage Bag
FAQ
For more info and instructions, please check the User Manual for Cetus X FPV Kit.
Please DO NOT configure ESC or Motor settings on the Betaflight configurator.
The VR03 FPV goggles do not include a Micro SD card. You should prepare it before using the DVR recording function.
The External TX module for LiteRadio 3 should be bought separately. Recommend BETAFPV Nano TX Module.
BFPV-00313881, BetaFPV Cetus FPV RTF Drone Combo Kit
The Cetus FPV Kit offers an exceptional opportunity for FPV beginners to explore the thrilling world of First-Person-View flying. This all-inclusive kit, comprising the Cetus brushed quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, brings everything you need for an immersive FPV experience. The auxiliary flight function makes it a breeze for everyone to take to the skies, greatly reducing the learning curve for newcomers. With three distinct flight modes Normal, Sport, and Manual, with three speed settings, the Cetus FPV Kit can cater to a wide range of pilot preferences and flight environments.
The Cetus quadcopter features an altitude hold function that simplifies flying and ensures stable indoor hover, thanks to an accurate barometer and laser system. Additionally, it boasts self-protection mechanisms for emergency landings and automatic motor disarming in the event of a collision. The LiteSilver system within the quadcopter integrates Frsky D8, Rx 25mW VTX, barometer, laser, and optical flow sensor for optimal performance.
The LiteRadio2 SE transmitter, with its built-in 1000mAh 1S battery, offers an impressive 8-hour endurance, making it ideal for extended flight sessions. The VR02 FPV Goggles provide an immersive FPV experience, featuring high-quality antennas for clear, stable reception, ergonomic design for comfort, and simplicity of operation. The Cetus FPV Kit is the perfect entry point into FPV flying for beginners and a robust choice for enthusiasts.
Features:
Perfect for indoor fun
3 Flight modes Normal, Sport, and Manual Mode
Self-developed LiteSilver System
Self-protection Function
Auto hold hovering
Durable PA12 Frame
Impressive 4-5 minute flight times
Low voltage protection
Automatic calibration makes preflight a breeze
Small and convenient
FPV supported
Specifications:
Weight: 1.23oz (35g)
Protocol: Frsky D8
Flight Controller: Cetus FC V3.0
VTX: 25mW
Camera: CO2 FPV Micro
Goggles: VR02
Propeller: 31mm 4-Blade w/0.8mm Shaft
Motor: 716-19000KV Brushed Motor
Flight Time: 4-5 Minutes
Flight Distance: 80m (interference-free environment)
Assembly Level: RTF
Includes:
(1) Cetus FPV Kit
(1) LiteRadio2 SE Transmitter
(1) VR02 FPV Goggles
(1) CO2 FPV Micro Camera
(2) BT2.0 3.7V 300mAh 1S Lipo Battery
Charger and voltage tester
(4) Spare 31mm 4-Blade props
(1) Portable storage bag
Needed to Complete:
Everything you need is included
This product was added to our catalog on October 21, 2023
BFPV-01020005_2, BetaFPV Cetus X FPV RTF Drone Combo Kit w/BetaFPV Cetus Flight Controller
The Cetus X FPV Kit is designed for both seasoned pilots and newcomers, offering an advanced 2S power whoop bundle that propels your FPV experience to new heights. Comprising the Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, it's a complete package to elevate your FPV game. With the inclusion of the latest BT2.0 450mAh 1S Battery, you'll enjoy extended flight times and higher discharge rates.
This kit unlocks a new level of control and flying experience, featuring unparalleled control and extended radio and video transmission. It's a fantastic entry point for beginners to dive into the world of FPV, thanks to its accessibility and potential for growth. The Cetus X offers a variety of flight modes and speeds to suit different pilot preferences and flight environments
The FPV kit combines cutting-edge components, including the Betaflight FC for powerful flight control, and The VR03 FPV Goggles are equipped with DVR recording, allowing pilots to capture and relive their most exciting moments. The Cetus X Brushless Quadcopter, combined with the advanced components in this kit, provides you with an outstanding FPV experience that's hard to match.
The LiteRadio 3 SE transmitter offers fantastic versatility as it is compatible with a range of popular drone racing simulators, including Drone Racing League (DRL), DCL, Uncrashed, and Liftoff. This compatibility ensures an immersive and realistic training experience for aspiring drone racers and enthusiasts. Whether you're honing your skills or mastering the art of FPV flight, the LiteRadio 3 provides a seamless connection to these renowned simulators, making it a valuable tool for both beginners and experienced pilots.
Features:
Perfect for indoor fun
Flight modes Normal, Sport, and Manual Mode
Turtle Mode makes crash recovery a breeze
Self-developed LiteSilver System
Auto hold hovering
Powerful 2S compatibility
Tilt Camera
Durable PA12 Frame
Impressive 4-5 minute flight times
Low voltage protection
Automatic calibration makes preflight a breeze
Small and convenient
FPV supported
LiteRadio compatible with FPV Flight simulators like DRL, DCL, Uncrashed, and Liftoff all Available on Steam
Specifications:
Wheelbase: 3.74in (95mm)
Weight: 1.94oz (55g)
Protocol: Frsky D8
Flight Controller: Cetus FC V3.0
VTX: 25-400mW M04
Camera: CO4 FPV Micro
Goggles: VR03
Propeller: Gemfan 2020 4-Blades
Motor: 1103-1100KV Brushless Motors
Flight Time: 4-5 Minutes
Flight Distance: 80m (interference-free environment)
Assembly Level: RTF
Includes:
(1) Cetus X FPV Kit
(1) LiteRadio 3 SE Transmitter (Frsky)
(1) VR03 FPV Goggles
(1) CO4 FPV Micro Camera
(4) BT2.0 3.7V 450mAh 1S Lipo Battery
Charger and voltage tester
(4) Spare Gemfan 2020 4-Blades
(1) Portable storage bag
Needed to Complete:
Everything you need is included
This product was added to our catalog on October 21, 2023
BFPV-01020010_5, BetaFPV Cetus Lite FPV RTF Drone Combo Kit
The Cetus Lite FPV Combo is your gateway to the exciting world of FPV flying. This ready-to-fly kit is perfect for beginners, offering a safe and thrilling experience for both kids and adults. It features an auxiliary altitude hold function, making it easy for users to control and navigate. The durable frame, constructed from impact-resistant PA12 material, is equipped with a protective guard, ensuring safe flights indoors and outdoors.
With the high-efficiency BT2.0 300mAh 1S battery, you can enjoy flights lasting around 4-5 minutes, and swapping batteries is a breeze. The Cetus Lite also includes a low-voltage prompt function to protect your battery. Automatic calibration simplifies your flying experience, ensuring stability every time you take off. With the Altitude Hold feature and the LiteRadio 1 transmitter, even newcomers can effortlessly control the quadcopter's height, while the included VR02 goggles provide an immersive FPV experience.
The LiteRadio 1 transmitter offers fantastic versatility as it is compatible with a range of popular drone racing simulators, including Drone Racing League (DRL), DCL, Uncrashed, and Liftoff. This compatibility ensures an immersive and realistic training experience for aspiring drone racers and enthusiasts. Whether you're honing your skills or mastering the art of FPV flight, the LiteRadio 1 provides a seamless connection to these renowned simulators, making it a valuable tool for both beginners and experienced pilots.
Features:
Perfect for indoor fun
Auto disarming upon collisions
Auto hold hovering
Durable PA12 Frame
Impressive 4-5 minute flight times
Low voltage protection
Automatic calibration makes preflight a breeze
Small and convenient
FPV supported
LiteRadio compatible with FPV Flight simulators like DRL, DCL, Uncrashed, and Liftoff all Available on Steam
Specifications:
Length: 3.5in (90mm)
Width: 3.3in (85mm)
Height: 1.7in (45mm)
Weight: 1.26oz (36g)
Protocol: Frsky D8
Flight Controller: Cetus FC V3.0
VTX: 25mW
Propeller: 31mm 4-Blade w/0.8mm Shaft
Motor: 716-19000KV Brushed Motor
Flight Time: 4-5 Minutes
Flight Distance: 80m (interference-free environment)
Assembly Level: RTF
Includes:
(1) Cetus Lite
(1) LiteRadio Transmitter
(1) VR02 FPV Goggles
(1) Cetus Lite Camera and VTX
(2) BT2.0 3.7V 300mAh Lipo Battery
Charger and voltage tester
(4) Spare 31mm 4-Blade props
(1) Spare 716 CCW Motor
(1) Spare 716 CW Motor
Needed to Complete:
Nothing! Everything needed for lift off is included
This product was added to our catalog on October 21, 2023
BLH4210, Blade 1S 40C LiPo Battery (3.7V/150mAh)
This is a replacement Blade 1S 40C LiPo Battery with 150mAh capacity.
NOTE: For use with Blade BLH4211 USB Charger.
This product was added to our catalog on April 27, 2021
BLH4211, Blade USB 1S LiPo Battery Charger
This is a replacement Blade USB 1S LiPo Battery Charger, for use with the 70 S Helicopter. This charger is only intended for 1S, 3.7V 70 S LiPo battery (BLH4210).
This product was added to our catalog on April 27, 2021
All batteries must be shipped by a ground shipping method.
CNHL always gets the power we need for the price we love! This 450mah 1S battery is perfect all your Micro Drone!
Check out our selection of 1S batteries, and all our CNHL products!
Specifications
Capacity: 450mAh
Voltage: 3.7V / 1-Cell / 1S
Discharge: Rate 70C Continual
Charge Rate: 2C Max
Size: 8x17x59mm
Weight: 49g (Including wire and connector)
Output Connector: PH2.0
Balance Connector: No
Remarks: No
Wire Size (AWG): 20#
Includes
1x CNHL MiniStar 3.7V 1S 450mAh 70C LiHV Micro Battery (4 Pack) - PH2.0
All batteries must be shipped by a ground shipping method.
The CNHL SpeedyPizza 3.7V 1S 350mAh 75C LiHV Battery - BT2.0. This high-performance battery offers 75C of power, providing you with a reliable and consistent source of energy. Grab 5 slices of BT2.0 power for your whoop today!
Check out our selection of 1S batteries, and all our CNHL products!
Specifications
Capacity: 350mAh
Voltage: 3.8V / 1-Cell / 1S1P
Discharge Rate: 75C Continual / 150C Burst
Charge Rate: 5C Max
Size: 6x11x67mm
Weight: 8g/each battery
Output Connector: BT2.0
Balance Connector: JST / XH
Wire Size (AWG): 22#
Package: 5 pcs CNHL Pizza Series 350mAh 3.8V 1S 75C Lipo Battery with BT2.0
Includes
5x CNHL SpeedyPizza 3.8V 1S 350mAh 75C LiHV Battery - BT2.0
Check out Craftedkwads Odonata HD 2" Frame Kit - dual variant
A micro drone that fits in the palm of your hand, rips like a 5", and shares the incredible vision of a dragonfly.
Fast, silent, and small, the Odonata HD is built for stealth, power, endurance, and fun. Spinning 2" props and a compact 95mm wheelbase, the Odonata HD can be flown anywhere, without sacrificing performance and allowing you to use the systems you love!
Be sure to check out all our 2" frames, and all our Craftedkwads Products.
Features
Supports DJI (Naked Vista)
Supports HDZERO (Whoop Lite)
Supports Avatar (1S Lite VTX)
Supports Analog (Nano VTX)
Specifications
Prop size: 2" (51mm)
Frame weight: 11g
Camera mounting: 14x14 m2 (nano)
Weight: 11g
Electronics mounting: 25.5x25.5 m2 (Bottom Plate), 20x20 m2 (Top Plate)
Motor mounting: Ø6.6mm tri-point m1.4, Ø9mm two-point m2
Systems Supported:
DJI (Stripped Air Unit Lite/Vista/Link)
Avatar (Lite VTX)
HDZERO (Whoop Lite)
Analog (Nano vtx)
Includes
1x Craftedkwads Odonata HD 2" Frame Kit - dual variant
1x Body Plate, 2mm thick Carbon Fiber
1x Top Plate, 1.5mm thick Carbon Fiber
3x m2x20mm standoff, Aluminum
6x m2x6mm screw, Steel
1x Nano Camera Mount Set, TPU
1x Rear Mount, TPU
1x Craftedkwads Sticker
This micro drone boasts remarkable performance, fitting in the palm of your hand while providing the same feel as a 5" craft. The Ironclad works with 2" props and has an approximate 50g dry weight. The Odonata HD combines speed, silence, and a dragonfly's-eye view into one powerful package. This Ironclad ripper is designed to take on heavier builds and larger motors with its 2.5mm thick bottom plate.
Be sure to check out all our 2" frames, and all our Craftedkwads Products.
Features
Palm size
Dragonfly like POV
Ultra light weight
Supports DJI (Naked Vista)
Supports HDZERO (Whoop Lite)
Supports Avatar (1S Lite VTX)
Supports Analog (Nano VTX)
Extra Durable bottom plate
Specifications
Motor mounting: Ø6.6mm tri-point m1.4, Ø9mm two-point m2
Electronic mounting: 25.5x25.5 (bottom plate), 20x20 (top plate)
Camera mounting: Nano (14x14)
Prop size: 2"
Weight: 13g
Top Plate: 1.5mm
Bottom Plate: 2.5mm
VTX systems supported:
DJI: naked vista
HDZERO: Whoop Lite
Avatar: 1S lite VTX
Analog: Nano VTX
Includes
1x CraftedKwads Odonata HD 2" Ironclad Micro Frame Kit
EFLB2001S45, E-flite 1S LiPo Battery 45C (3.7V/200mAh)
A replacement 200mAh 45C 1s (3.7V) Li-Po Battery from E-Flite. Suited for use with the Inductrix FPV, and many other applications that commonly accept a 150-210mAh sized battery.
This product was added to our catalog on October 14, 2021
EFLB5001S25, E-flite 1S 25C LiPo Battery Pack (3.7V/500mAh) w/JST Connector
This is a replacement E-flite 1S - 3.7V, 25C, 500mAh LiPo Battery Pack.
Specifications:
Type: LiPo
Capacity: 500mAh
Voltage: 3.7V
Weight: 0.51 oz (14.5 g)
Configuration: 1S
Length: 2.35 in (59.5mm)
Width: 0.75 in (19.0mm)
Height: 0.30 in (7.5mm)
Maximum Continuous Discharge: 25C
Maximum Continuous Current: 12.5A
This product was added to our catalog on December 20, 2021
All items with batteries must be shipped by a ground shipping method.
The TinyHawk 2 RTF kit has everything you need to enjoy micro flight, all packed into a handy carrying case! This is truly the ideal way to try out FPV!
2 batteries are included (a 1S and a 2S), but if you want to maximize your air time, we recommend picking up a few of the following RDQ Series LiPos:
1S 450mAh - PH2.0
2S 300mAh - PH2.0
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!
Specifications
Frame
Wheelbase: 75mm
Dry Weight: 31.2g
All Up Weight: 43.5g with 1x 450mAh 1S battery
Frame Material: Polypropylene
Motors
Stator Size: 0802
Kv: 16000kv
Propeller Mount: Push-On Avan TH-style
Propeller: Avan Turtlemode 4-Blade
All-In-One (AIO) Flight Controller
Flight Controller: F4 (MATEKF411RX Firmware)
ESC: 4-in-1 5A BlHeli_S
Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode)
Battery Connector: JST-PH2.0
FPV System
VTX Power: 25/100/200mw Switchable
Channels: 37CH incl. Raceband
Camera: RunCam Nano 2 1/3" 700TVL CMOS
Smart Audio Connected
Includes
1x Tinyhawk II FPV Racing Drone
1x EMAX Transporter 5.8G FPV Goggles
1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging
1x EMAX E6 Transmitter
1x EMAX 450mAh 1S HV Battery
1x EMAX 300mAh 2S HV Battery
2x CCW + 2x CW Spare Props
1x 1S-2S USB LiPo Charger
1x Screwdriver + Hardware Kit
1x Micro USB Charging Cable
1x Faux Carbon Fiber Carrying Case
