Traxxas Stampede 4X4 Kit
Hot Racing HRASJT254, Hot Racing Traxxas 32P Steel Spur Gear (Silver) (54T)
HRASJT254, Hot Racing Traxxas 32P Steel Spur Gear (Silver) (54T) This is the Hot Racing Steel 32 Pitch, 54 Tooth Spur Gear with Silver hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4. Features: CNC machined and lightened hardened steel construction Black oxide coating for durability and corrosion resistance Silver-colored countersunk washers Specifications: Number of Teeth: 54 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face width: 6mm (0.24 inch) Internal diameter: ~11mm (~0.43 inch) Includes: 54 tooth 32 pitch spur gear (3) mounting screws (3) silver-colored countersunk washers (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate) Requires: Hardened clutch bell or pinon gear Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential. This product was added to our catalog on May 16, 2021
$20.99
Hot Racing HRASLF288RCR, Hot Racing Slash 4x4 Rear Light Weight Metal CV Splined Drive Shaft Set
HRASLF288RCR, Hot Racing Slash 4x4 Rear Light Weight Metal CV Splined Drive Shaft Set Traxxas Rustler 4x4 Traxxas Slash 2wd Traxxas Slash 4x4 Traxxas Stampede 4x4 This is a replacement Hot Racing Slash Rear Light Weight Metal CV Splined Drive Shaft Set for the Slash, Slash 4X4, Stampede 4X4 and Rustler 4X4. Features: CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction Replaces factory plastic drive axles Hard Black Anodized Aluminum Slider Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement Design eliminated CV pin setscrew Hardened S2 Spring steel wheel shaft #45 Steel is black finish S2 spring in Brown finish Rubber dust boot to keep the Splined Drive for maximum protection against the elements Includes: (2) Rear Cv Splined Drive Shaft spline CVD shaft assemblies (2) M4x2.5x11mm screw shafts Specifications:Approximate overall collapsed length: 113mm NOTES: Replaces factory plastic Traxxas parts Replacement parts include: SLD425 (M4x2.5x11mm screw shafts) This product was added to our catalog on December 16, 2021
$54.99
Traxxas TRA7448, Traxxas Progressive Rate Long GTR Shock Springs (Blue - 0.892) (2)
TRA7448, Traxxas Progressive Rate Long GTR Shock Springs (Blue - 0.892) (2) This is a pack of two "Blue - 0.892 Rate" Traxxas Progressive Rate Long GTR Shock Springs. These are the stiffest progressive springs available for the Long shock (TRA7461X). Traxxas offers a wide variety of spring rates for the GTR shocks to provide almost limitless tuning possibilities. The springs are made from high-quality spring steel with durable powder-coated finishes, and the spring rate is indicated by colored dots on the end of the spring. Long Spring Rates: Softest TRA7440: Orange - 0.623 Rate TRA7441: Green - 0.653 Rate TRA7444: Black - 0.767 Rate TRA7445: Pink - 0.810 Rate TRA7448: Blue - 0.892 Rate Stiffest Effects of Shock Spring Changes Shock Spring Characteristic Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness This product was added to our catalog on May 13, 2021
$5.00
Pro-Line PRO1019010, Hyrax 2.8" Tires MTD Black 6x30 Stampede F/R
PRO1019010, Hyrax 2.8" Tires MTD Black 6x30 Stampede F/R Fits: Stampede® 2wd Stampede® 4x4 Other 1:10 Monster Trucks with 12mm Hexes
$47.99
Hot Racing HRASLF25SH06, Hot Racing Traxxas Slash/Stampede 4x4 Aluminum Lock Servo Arm (25T)
HRASLF25SH06, Hot Racing Traxxas Slash/Stampede 4x4 Aluminum Lock Servo Arm (25T)This product was added to our catalog on December 16, 2021
$10.99
Pro-Line PRO119210, Pro-Line Masher 2.8" Pre-Mounted w/Raid Electric Rear Wheels (2) (Black) (M2) w/Removable Hex
PRO119210, Pro-Line Masher 2.8" Pre-Mounted w/Raid Electric Rear Wheels (2) (Black) (M2) w/Removable Hex This is a set of two Pro-Line Masher 2.8 Tires Pre-Mounted on Raid Electric Rear Wheels. These pre-mounts are intended for use on the rear of the Traxxas electric Stampede and Rustler trucks. Pro-Line takes the guess work out of your glue job by doing the mounting for you so you can spend your time having fun! The Mashers ultra-modern Chevron Style tread digs deep into the roughest and toughest terrain and looks mean doing it. The side tread of this behemoth tire features a hook shape that craters the dirt and achieves unparalleled side traction. After fitting your truck with this massive Masher tread you'll be ready for back yard thrashing and mashing on any neighborhood terrain. The Masher 2.8” tire is perfect for the Traxxas Stampede 2WD and 4WD (Front and Rear) and Traxxas Rustler 2WD and 4WD (Front and Rear) and the JATO Rear. Impress your friends – Get a set of Pre-Mounted Mashers today! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO6335-00 Replacement Hexes) or even upgrading your wheels to 17mm wheel hexes (PRO6336-00 Sold Separately) for extreme use! These new Raid 2.8” wheels accomplish all of this and more by using Pro-Line’s unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! The Raid wheels feature a detailed 10-spoke design that recreates the latest in high performance full size forged racing wheels with the strength and durability to match the bold look. Molded-in bead-loc detail only adds to the realism. These wheels are proudly Made by Us in the USA and are destined to change the wheel game forever! Get your new Badlands MX28 2.8” Tires on Raid Removable Hex Wheels today! Tire Features: Ultra-Traction Chevron type Tread Adds Tough and Aggressive Monster Truck Styling to your Truck Designed to Tackle any Terrain Spend Less Time Gluing and More Time Having Fun Made in the USA, since 1982 Wheel Features: Removable Hexes Allow you to Change Wheel Offsets on the Fly Easily Replace Damaged Hexes or Upgrade to 17mm hexes The 2 Most Common Offsets are Included Fits any of Pro-Line’s 6x30 Removable Wheel Hexes Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 4.90" (124mm) Width: 2.78" (71mm) This product was added to our catalog on May 22, 2021
$51.24
RPM RPM70392, RPM Front Shock Tower, Black: SLH 4x4, ST 4x4
RPM70392, Front Shock Tower, Black: SLH 4x4, ST 4x4 Traxxas Rally Traxxas Slash 4x4 Traxxas Stampede 4x4 This product was added to our catalog on December 16, 2021
$10.95
