Traxxas Kits
Traxxas 58014-4, Traxxas Slash 1/10 Electric 2WD Short Course Truck Kit
58014-4, Traxxas Slash 1/10 Electric 2WD Short Course Truck Kit This Traxxas Slash 1/10 Electric 2WD Short Course Truck Kit gives you a dynamic take on the popular Slash, letting you build your own short-course truck from the ground up. A clear Slash body give drivers the option of customizing their own unique paint scheme. Once built this kit includes the features drivers have come to know in the RTR, with 4-wheel independent suspension to deliver a real-world driving experience. All the required parts and electronics are included in the box, with battery and charger sold separately. You'll get a TQ 2.4GHz radio system, powerful Titan electric motor, and waterproof XL-5 electronic speed control. All the parts are organized neatly in labeled bags with a fully illustrated color manual to make building a low-stress exercise.NOTE: Built kit shown in photos is for illustrative purposes only. This is a model that requires assembly and additional items to complete. See needed to complete list below for a list of items required to complete the model. Features: Clear pre-cut body Includes window masking, decals, and custom masking decals Scale dimensions and looks of actual short course off-road race trucks The Slash reaches speeds in excess of 30mph using the included optional 23-tooth pinion gear and accessory 7-cell Power Cell battery (sold separately)* Powerful Titan 12T 550 modified motor with internal cooling fan TQ 2.4GHz Radio System Race in dirt, mud, water, and snow thanks to Traxxas' innovative water-sealed electronics XL-5 Waterproof Electronic Speed Control Innovative water-sealed design Forward/reverse/brake EZ-Set push-button setup Thermal shutdown protection LiPo and NiMH compatible with two-stage low-voltage detection Three easy-to-program drive profiles Equipped with Traxxas High-Current Connectors (patented) Backed by the Traxxas Lifetime Electronics Warranty Digital high-torque waterproof steering servo O-ring sealed watertight receiver box keeps the micro receiver dry Long-wheelbase fiber-composite monocoque chassis 13.2 inch wheelbase Over 3.5-inches of ground clearance Easy access battery compartment Adjustable battery hold down accepts 6- and 7-cell flat packs and 7-cell hump packs (sold separately) Chassis nerf bars absorb impact and support the body Scale front and rear tube-style bumpers Sturdy body mounts incorporate reinforced washers for additional body support Efficient Magnum 272 metal-gear transmission with ball bearings Sealed gearbox protects the transmission with beefed up motor guard for extra protection Torque-Control slipper clutch system External gear cover with easy slipper access Reliable composite planetary gear differential with a steel ring gear Heavy-duty telescoping U-joint driveshafts and yokes Adjustable steel turnbuckles and captured rod ends Precision hex hardware throughout Efficient rubber-sealed ball bearings Fully adjustable Ultra Shocks with X-ring technology Progressive rate white powder coated shock springs with race-tuned responsive spring rate Licensed BFGoodrich Mud Terrain T/A tires for superior on- and off-road traction Includes performance foam inserts and satin chrome 5-spoke wheels Specifications: Length: 22.36 inches (568 mm) Front Track: 11.65 inches (296 mm) Rear Track: 11.65 inches (296 mm) Weight: 76.2 ounces (2.16 kg) Height (overall): 8.43 inches (214 mm) Wheelbase: 13.2 inches (335 mm) Front Shock Length: Long Rear Shock Length: XX-Long Front Tires: BFGoodrich Mud-Terrain T/A Rear Tires: BFGoodrich Mud-Terrain T/A Front Wheels: 2.2" Satin-Finish Rear Wheels: 2.2" Satin-Finish Speed Control Type: Waterproof XL-5 ESC with low-voltage detection Motor (electric): Titan® 12T 550 (12-turn) Gear Ratio (internal): 2.72 (final drive: 12.58) Differential Type: Steel Composite Planetary Gear Pitch: 48-Pitch Transmission: Metal Gear Magnum 272™ Steering: Bellcrank Chassis Type: Modified Tub Chassis Material: Composite Nylon Center Ground Clearance: 3.5 inches (89 mm) Top Speed: 30+mph** Skill Level: 1 Radio System: TQ™ 2.4GHz Radio System (2-channel) *Battery Tray Dimensions: 165 mm x 49.5 mm x 23 mm, 25 mm Required Batteries: 4 "AA" (transmitter), Traxxas Power Cell Battery: (7-cell NiMH or 2-cell LiPo) Includes: Unassembled Slash 2WD chassis TQ™ 2.4GHz radio system Waterproof XL-5™ electronic speed control Titan® 12-Turn 550 motor Waterproof high-torque steering servo BFGoodrich Mud-Terrain T/A tires with foam inserts, mounted on satin chrome 5-spoke wheels Pre-cut clear Slash body with decals and window masking Includes custom masking decals for unique paint designs Full-color step-by-step assembly manual Needed to Complete: (1) 6-7 cell NiMH or 2-cell LiPo (1) Battery charger (4) AA Batteries (Transmitter) Polycarbonate Paint for body This product was added to our catalog on April 28, 2021
$229.99
Traxxas 82016-4, Traxxas TRX-4 1/10 Scale Trail Rock Crawler Assembly Kit w/TQi 2.4GHz Radio
82016-4, Traxxas TRX-4 1/10 Scale Trail Rock Crawler Assembly Kit w/TQi 2.4GHz Radio The Traxxas TRX-4 Scale and Trail Crawler chassis kit offers the same innovative features as the RTR vehicle, combined with the fun and excitement of building your own kit. Build your own portal axles, high/low range transmission, and remotely locking differentials. All the parts are organized neatly in labeled bags with waterproof electronics and pre-assembled shocks and suspension links. A fully illustrated color manual makes the kit as much fun to construct as it is to take off-road. Easy to Follow Assembly InstructionsThe TRX-4 Chassis Kit isn’t just for expert hobbyists. Traxxas goes the extra mile to make the full-color instruction book easy to follow and fun to use. Each section corresponds to a labeled bag with step-by-step assembly instructions. True-to-scale part illustrations and ruler charts make it easy to differentiate between different screws, bearings, and gears. Helpful assembly tips and clear illustrations take the frustration out of the assembly process. Have fun on the workbench and on the trail with the new TRX-4 Chassis Kit. Features: Easy to follow full-color assembly manual Trail-tuned XL-5 HV Waterproof Electronic Speed Control Powerful Titan™ 21T reverse rotation motor Portal Axles Rigid Steel Frame Full-time shaft driven 4-wheel drive Tough 6mm stub axles Steel front CV driveshafts Hardened steel rear axle shafts Remote locking steel gear differentials with cable-actuation Steel gear transfer case Innovative Battery Compartments Secondary battery mount over front axle for forward weight bias Two speed high/low range transmission with remote shifting Superior 45° steering angle Front — 3 link with panhard Rear — Triangulated 4 link Pre-assembled heavy-duty rod ends with steel hollow balls 5mm diameter steel link rods with 4mm threaded ends Coilover GTS shocks exclusive to TRX-4 chassis Silver-anodized aluminum bodies Threaded bodies with collars easily adjust ride height Silky smooth damping for the toughest trails O-ring cap seal and dual X-ring shaft seals Shock oil included in kit 1.9” Canyon Trail tires with trail-tuned foam inserts Tough black scale wheels Trail tuned S1 rubber compound 12mm steel hex Tire glue required TQi™ 2.4GHz 4-channel transmitter Patented O-Ring sealed watertight receiver box keeps the micro receiver dry Sealed Ball Bearings Hex hardware with rust-resistant black oxide coating Specifications: Length: 20.57 inches (523mm) Front Track: 9.78 inches (249mm) Rear Track: 9.78 inches (249mm) Ground Clearance: 3.14 inches (80mm) Weight: 6.42lb (2.91kg) Height: 10.47 inches (266mm) Wheelbase: 12.28 inches (312mm) Front Shock Length: 3.54 inches (90mm) Rear Shock Length: 3.54 inches (90mm) Approach Angle: 63.82° Departure Angle: 43.22° Breakover Angle: 58.93° Front Wheels: 1.9 x 1.02 inches (49 x 26mm) Rear Wheels: 1.9 x 1.02 inches (49 x 26mm) Front Tires: 4.64 x 1.89 inches (118 x 48mm) Rear Tires: 4.64 x 1.89 inches (118 x 48mm) Wheel Hex: 12mm Speed Control: XL-5™ HV Motor (electric): Titan® 21T Reverse Rotation Transmission: 2-speed Hi-Lo, Remote Shifting Gear Pitch: 32 Brake Type: Electronic “Hill Hold” Skill Level: 2 Battery Tray: 158.75 L x 47 W x 23/26mm H Includes: Unassembled TRX-4 Chassis Kit TQi™ 2.4GHz 4-channel radio system Steering Servo 3 Sub Micro Servos (2-speed & diff locks) XL-5 HV waterproof ESC Titan® 21T 550 motor Full-color step-by-step assembly manual Needed to Complete: TRX-4 compatible body (313mm wheelbase) (4) AA batteries for transmitter 6 or 7 cell NiMH or 2s or 3s LiPo battery pack with Traxxas High-Current Connector Battery charger Metric hex drivers (1.5mm, 2.0mm, 2.5mm) Basic hand tools (screwdrivers, needle nose pliers) CA glue Safety glasses This product was added to our catalog on May 27, 2022
$399.99
Traxxas 82010-4, Traxxas TRX-4 Sport 1/10 Scale Trail Rock Crawler Assembly Kit
82010-4, Traxxas TRX-4 Sport 1/10 Scale Trail Rock Crawler Assembly Kit The Traxxas TRX-4 Sport 1/10 Scale Trail Rock Crawler Assembly Kit combines all the technical capability of a TRX-4, with the flexibility to build it your way, for your terrain and off-road mission. The kit includes everything you need to assemble a complete roller, but allows you to choose your preferred electronics. This is the perfect kit for enthusiasts who want to customize the vehicle with their own choice of electronics. It also includes over $70 of highly detailed scale accessories that are sure to win points. Traxxas makes assembly easy with a full-color assembly guide with step by step instructions. Features: Unassembled kit Pre-cut clear TRX-4 Sport body Includes over $70 of scale accessories Full color step-by-step assembly manual Portal Axles Steel-gear single speed transmission Aluminum coilover GTS shocks 1.9” Canyon Trail S1 compound tires with trail-tuned foam inserts Rugged black 5-spoke wheels Includes: Expedition Rack with traction boards, shovel, axe, jack, fire extinguisher, and fuel cans (#8120X) LED-ready front grill with lenses (Light kit #8116, sold separately) LED-ready rear tail gate with lenses (Light kit #8117, sold separately) Snorkel with side mirrors (#8119) Tires and Wheels Needed to Complete: Transmitter & Receiver 1/10 Crawler ESC & Motor High Torque Steering Servo 2S to 3S LiPo Battery (158.75 L x 47 W x 23/26mm H Max) & Charger AA size Batteries for Radio System Paint for Body Tools for assembly This product was added to our catalog on April 17, 2021
$299.99