PTK-5141-22, ProTek RC 2S 50C 1100mAh Losi Mini T/B & JRX2 LiPo Battery w/EC2 Connector
The Protek R/C 2S 50C 1100mAh Losi Mini T/B and JRX2 LiPo Battery is built with performance in mind. Using Silicon Graphene technology this battery packs a punch with it's 50c discharge rating! Designed to work with the Losi Mini T, B and Mini JRX2 this pack offers extended runtimes with it's larger 1100mah capacity. Equipped with an EC2 style connector makes this a plug in option with no need to mess with adapters or to get out the soldering iron. With more time on the track and the ability to dish out the power this Protek battery pack is an excellent upgrade for your Mini T, B or JRX2 vehicles.
Features:
Direct fit for Losi Mini B, T and JRX2 vehicles
More runtime, with a dramatic increase in punch
Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery
Improved efficiency, lower operating temperatures, and lower internal resistance!
Factory installed EC2 plug
Battery Model
2s 50C 1100mAh
Application
Air, Ground
Type
Silicon Graphene
Voltage
7.4V nominal
Capacity @7.4V
1100mAh
Weight
68g
Connector Type
EC2
Balance Connector
XH Connector
Number of Cells
2 Cell
Configuration
2S1P
Dimensions (LxWxH)
58x32x20mm
Maximum Charge Rate
4C (4.4A)
Watt Hour @7.4V
8.14Wh
Includes:
(1) ProTek R/C Battery
This product was added to our catalog on September 1, 2022
RPM81662, RPM Losi Tenacity/Lasernut Front A-Arm (Black) (2)
These are the RPM Losi Tenacity/Lasernut Front A-Arms. Each pair of RPM A-arms is molded in a blend of nearly indestructible nylons and manufactured in the USA. These A-arms are designed to withstand even the toughest conditions, so you can push your vehicle to the limit without worrying about breakage. Performance has been improved by tightening the tolerances of the A-arm to create much smoother, more consistent suspension movement for reliable camber, caster, and toe angle settings. The suspension geometry is set to stock settings, which makes installing a set of RPM A-arms a simple swap with very little needed to be done to get back on the track.
RPM Tenacity and Lasernut A-arms feature a slim, aerodynamic shape that helps them transition up and over objects, rather than bluntly plowing into them. Designed with 30° leading and trailing edges, gives each A-arm a sleek look and feel. To provide additional strength where it's needed most, RPM has beefed up key areas such as the outer hinge pin support diameters by as much as 60%. This means that even less than perfect “incidents” won’t end your day of fun. Experience unparalleled performance on the track or off-road with these ultra strong, incredibly durable A-arms. Package includes two front A-arms with hardware.
NOTE:
RPM Front A-arms for the Losi Tenacity fit the following Tenacity platforms: U4 Lasernut, TT and DB. Also fits the following discontinued models: Pro, Monster Truck and T.
RPM Rear A-arms replace stock Losi LOS234016. Does not include metal tubes for outer hinge pins. Transfer of stock metal tubes to RPM a-arms is required.
This product was added to our catalog on November 25, 2023
RPM81092, RPM Losi Tenacity/Lasernut Rear A-Arm (Black) (2)
This product was added to our
These are the RPM Losi Tenacity/Lasernut Rear A-Arms. Each pair of RPM A-arms is molded in a blend of nearly indestructible nylons and manufactured in the USA. These A-arms are designed to withstand even the toughest conditions, so you can push your vehicle to the limit without worrying about breakage. Performance has been improved by tightening the tolerances of the A-arm to create much smoother, more consistent suspension movement for reliable camber, caster, and toe angle settings. The suspension geometry is set to stock settings, which makes installing a set of RPM A-arms a simple swap with very little needed to be done to get back on the track.
RPM Tenacity and Lasernut A-arms feature a slim, aerodynamic shape that helps them transition up and over objects, rather than bluntly plowing into them. Designed with 30° leading and trailing edges, gives each A-arm a sleek look and feel. To provide additional strength where it's needed most, RPM has beefed up key areas such as the outer hinge pin support diameters by as much as 60%. This means that even less than perfect “incidents” won’t end your day of fun. Experience unparalleled performance on the track or off-road with these ultra strong, incredibly durable A-arms. Package includes two rear A-arms with hardware.
NOTE:
RPM Rear A-arms for the Losi Tenacity fit the following Tenacity platforms: U4 Lasernut, TT and DB. Also fits the following discontinued models: Pro, Monster Truck and T.
RPM Rear A-arms replace stock Losi LOS234017.
This product was added to our catalog on November 21, 2023
RC Speed Secrets "Next Level" Hybrid Ceramic Wheel Bearing Set (Stainless) for TLR 22 5.0 ELITE
Features:
3g+ lighter than current chrome/steel Rc gearbox ceramics
Our Stainless vs Current Chrome/Steel materials- Stainless resists water/corrosion. Chrome/steel rusts:
The presence of a minimum of 10.5 % chromium in our stainless steel gives it the property of corrosion resistance
Significantly reduce natural drive train drag due to increased quality & efficiency of our Next Level bearing components
Reduced rotating mass
Increase drive train roll
Faster more efficient acceleration
Includes:
Set of 8 Ceramic Bearings to equip the front and rear axles with hybrid "Next Level" Ceramic bearings.
Compatibility:
TLR 22 5.0 ELITE
This product was added to our catalog on October 9, 2021
TLR6313, Team Losi Racing 3x.5x5.5mm Locknut (10)
This is a set of ten replacement Team Losi Racing 3x.5x5.5mm Lock Nuts, and are intended for use with the Team Losi Racing 22 and 22T 1/10 scale vehicles.
This product was added to our catalog on June 12, 2024
