TRA7174A, Traxxas Pre-Mounted Talon Tires w/Gemini Wheels (Black Chrome) (2)
Tires & wheels, assembled, glued (Gemini black chrome wheels, Talon tires, foam inserts) (2)The Talon's unique tread pattern and soft compound rubber delivers excellent grip on a variety of surfaces. The Gemini chrome 2.2″ wheels provide responsive handling with a low-profile tire sidewall. Tires come pre-glued and ready to mount with matching foam inserts. Fits 12 mm wheel hubs.
This product was added to our catalog on September 7, 2021
TRA6493, Traxxas Steel Mod 1.0 Pinion Gear w/5mm Bore (34T)
Traxxas Mod 1 Pinion Gear. These gears are intended for use with the Traxxas XO-1 and are available in a variety of tooth count options to fine tune torque and top speed. Package includes one pinion gear and one set screw.
This product was added to our catalog on May 7, 2021
TRA3456, Traxxas Hoss Cooling Fan Kit w/Shroud (fits #TRA351R and #TRA3461 motors) (requires #TRA3458 heat sink to mount)
This product was added to our catalog on May 7, 2021
TAM51004, Tamiya TT-01 "G Parts" Gear Set
This is a replacement Tamiya TT-01 "G Parts" Gear Set.
This product was added to our catalog on December 16, 2021
HRASHS88M, Hot Racing CNC Aluminum Medium Duty Servo Saver
Hot Racing CNC Aluminum Medium Duty Servo Saver. Includes medium tension spring and insert adapters to accommodate 23, 24 and 25T splines.
Features:
CNC 6061-T6 aluminum construction
Blue anodized
Multiple inserts to accommodate many different servo splines
This product was added to our catalog on March 16, 2021
KIM149, Kimbrough 48P Spur Gear (90T)
Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.NOTE: The use of full width pinion gears is highly recommended.
This product was added to our catalog on December 19, 2021
TRA8946, Traxxas Maxx Steering Bellcranks
This is a replacement pack of Traxxas Maxx Steering Bellcranks, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck.
Includes:
(2) Steering Bellcranks
(1) Bellcrank support
(1) Servo saver
(1) Servo saver spring
(1) Draglink
(2) 3x20mm shoulder screws
This product was added to our catalog on May 7, 2021
ARAC4022, AR310872, Arrma 3S BLX Differential Case Set (37T)
This is a replacement Arrma 37 Tooth 3S BLX Differential Case Set. This high-quality Diff Case 37T Main Gear set provides replacement parts for your kit supplied items.
Features:
Tough composite material for durability and consistent performance under extreme operating conditions
Precision manufactured gear tooth configuration for smooth and trouble-free gear operation
High-quality diff case molding ensures a reliable diff seal
Integrated ring gear and diff case for strong construction
Includes:
(1) Ring Gear with Integrated Diff Case
(1) Diff Case Cap
This product was added to our catalog on October 11, 2021
TRA6832, Traxxas Caster Block Set
This is a replacement Traxxas Caster Block Set, and is intended for use with the Traxxas Slash 4x4 short course truck.
This product was added to our catalog on September 7, 2021
TRA6834, Traxxas Front/Rear Suspension Pin Set (8)
Suspension pin set, complete (front and rear)
Complete front and rear suspension pin set
This product was added to our catalog on September 7, 2021
ARA310780, Arrma 4x4 Composite Front Slider Driveshaft Set
Fits:
Arrma Big Rock 3S BLX
Arrma Granite 3S BLX
Arrma Granite 4x4 550
Arrma Granite 4x4 Mega
Arrma Senton 3S BLX
Arrma Senton 4x4 550
Arrma Senton Mega
Arrma Typhon 3S BLX
Arrma Typhon 4X4 550
Arrma Vorteks 3S BLX
This is a replacement Arrma 4x4 Composite Front Slider Driveshaft Set.
This product was added to our catalog on October 3, 2021
TRA8654, Traxxas 17mm Splined Wheel Hub Hex (Blue) (4)
This is a pack of two replacement Traxxas 17mm Splined Wheel Hub Hexes, in Blue anodize. Also included are four 4x5mm set screws and four 3x14mm pins.
NOTE: Maxx users, TRA8980X or TRA8996X drive shafts are required for use.
Fits:
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas Sledge
This product was added to our catalog on May 7, 2021
PTK-5114-22, ProTek RC 2S 130C Low IR Si-Graphene + HV Shorty LiPo Battery (7.6V/6400mAh) w/5mm Connectors (ROAR Approved)
The ProTek R/C 2S 130C Graphene + HV 6400mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. Weighing only 219 grams, the HV Shorty is lighter than a standard shorty pack, with a massive increase in capacity. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage.
This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. This pack is also a great choice for 1/8 e-buggies that want to run a lightweight 2x2S saddle pack configuration. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike.
Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best.
Features:
Lighter than a hardcase 2S LiPo pack of equal capacity
More runtime, with a dramatic increase in voltage and punch
Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery
Improved efficiency, lower operating temperatures, and lower internal resistance!
Perfect for stock class racers looking to shave grams
10C max charge rates - 1C charge rate recommended for longest life
NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.
This product was added to our catalog on January 2, 2024
GEA8502S60E2, Gens Ace 2S LiPo Battery 60C (7.4V/850mAh) w/EC2 Connector (Losi Mini-B)
GensAce batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All GensAce batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery.
Specifications:
Nominal Voltage: 7.4V (2S)
Capacity: 850mAh
Maximum Charge Rate: 1C (0.85A)
Discharge Rate:
Continuous: 60C
Peak: (Not Available)
Cell Configuration: 2S1P
Watt Hours: 6.29Wh
ROAR Approved: No
Connector:
Battery: EC2
Balance: XHR
Dimensions (LxWxH): 2.28x1.26x0.79in (58x32x20mm)
Weight: 2.01oz (57g)
This product was added to our catalog on April 4, 2023
YEA-MG-48033-038, Yeah Racing Hard Coated 48P Aluminum Pinion Gear Set (33, 34, 35, 36, 37, 38T)
The Yeah Racing Hard Coated 48P Aluminum Pinion Gear Set is a great option for fine tuning your 1/10 chassis. These pinions are titanium coated 7075 aluminum. This allows for a super smooth pinion for better drivetrain efficiency.Features:
Perfect for 1/10 scale using a 540 motor
Made from 7075 aluminum
Includes:
(1) 48P 33T Pinion
(1) 48P 34T Pinion
(1) 48P 35T Pinion
(1) 48P 36T Pinion
(1) 48P 37T Pinion
(1) 48P 38T Pinion
(1) Carrying Case
This product was added to our catalog on December 16, 2021
PTK-5071, ProTek RC QS8 Anti-Spark Connector (1 Male)
ProTek RC QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage. NOTE: T-style connector shown in photos is for size reference only, and is not included.
Features:
Anti-Spark Technology Increases Lifespan of Connector
110A Constant/300A Peak Current Rating
8.0mm Gold Plated Brass Bullet
Great for all High Voltage Applications
Nylon/Fiber Composite Housing
Package Includes One Male Connector & Wire Cap
Specifications:
Connector Diameter: 8.00mm
Metal Material: Gold Plated Brass
Plastic Material: Fiber Nylon
Flame retardant rating: UL94 V2
Temperature Range: -20C to +100C
Rated Voltage: 600V DC
Continuous Current: 110A
Peak Current: 300A
Weight: 20g ea (40g Male+Female Set)
Length: 35.9mm w/end capWidth:
Width: 29.5mm
Total Length When Connected: Approx 70mm (Male & Female w/End Cap)
Max Wire Gauge: 6awg
Includes:
(1) QS8 Male Anti-Spark Connector
(1) Wire Cap
This product was added to our catalog on March 24, 2021
RPM80382, Rear Bearing Carriers, Black: RU, ST, BA, SLH
Product Details
Key Features
Strong and durable
Overview
Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit owners to install massive 5mm x 11mm bearings (not included) that will not only improve performance, but will increase the time interval between maintenance periods. In addition, our front and rear bearing carriers are molded in black from RPM’s killer blend of bulletproof nylons and are guaranteed not to break!
Product Specifications
Refinement Color
Black
Material
Plastic
TRA3975, Traxxas Titan 550 Size Motor (21T)
The Titan 550 is a 21-turn fan-cooled 550 size motor capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size motor for extreme monster torque.
This product was added to our catalog on September 7, 2021
TRA2530, Traxxas Front Bulkhead
This is a replacement Traxxas Front Bulkhead, and is intended for use with the Rustler, Stampede, Nitro Stampede, Nitro Sport and Slash vehicles.
This product was added to our catalog on September 7, 2021
TRA6814, Traxxas Pre-Built Center Differential Kit (Slash 4x4)
The optional center differential transfers power to the front and rear differentials independently for smooth power delivery in rough conditions and maximum corner speed. The sealed differential can be adjusted by using different fluid viscosities for specific driving conditions. The center differential comes fully assembled and ready to install with 50-T, 52-T, and 54-T spur gears. (Center differential kit requires 32-pitch pinion gear.) For off-road use with NiMH and 2-cell LiPo batteries only. For 3-cell LiPo compatibility, Traxxas recommends the 6780 center differential kit.
This product was added to our catalog on May 7, 2021
HADMCL4156, Maclan EC5 Connectors (4 Male)
Maclan EC5 Male Connectors. These are genuine EC5 connectors and are compatible with any application that uses a female EC5. Standard applications for the male connector recommend that the male end be used in ESC or battery charger applications. Package includes four connector housings and eight male 5mm bullets.
This product was added to our catalog on October 3, 2021
HRAXMX48A06, Hot Racing Traxxas X-Maxx Aluminum Steering Servo Horn Arm (Blue)
The Hot Racing Traxxas X-Maxx Aluminum Steering Servo Horn Arm is an aluminum steering rack upgrade for the Traxxas X-Maxx.
Features:
CNC machined 6061 aluminum, anodized blue
Replaceable lock nut to help prevent loosening of fasteners
Retains stock double shear design for ultimate reliability
Fits Traxxas 2085 servos
This item replaces Traxxas factory plastic servo horn TRA7747
This product was added to our catalog on March 16, 2021
YOKRP-6313W6A, Yokomo 12mm Hex Racing Performer High Traction RWD Drift Wheels (White) (2) (6mm Offset)
These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm offset. These high traction type RP wheels are freshly designed, pursuing to the limit of traction and tracking ability on low grip road surfaces.
By maintaining high circularity accuracy and giving it moderate flexibility, it induces "deflection" during throttle operation, greatly improving traction performance. The rib on the back side of the wheel is also a bold cut, reducing interference with the arm, realizing more stable steering control.
The design which treated the rim part black is 1 inch down size, fits street style bodies.
NOTE: These wheels cannot be mounted on resin/plastic/composite disk wheel hubs of standard drift packages. Please use aluminum clamp type hub hexes
This product was added to our catalog on May 13, 2022
PTK-7805, ProTek RC Aluminum Servo Horn (25T-Futaba, Orion, Savox and ProTek)
This is a ProTek R/C Aluminum Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a 3mm thick arm for durability, has 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles.
Features:
19mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
3mm thick arm
27.25mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Orion/Savox/ProTek Output Shaft
Note: Due to manufacturer tolerances, this servo horn may be a tight fit with certain servo brands.
This product was added to our catalog on December 16, 2021
TRA7573R, Traxxas LaTrax Pre-Mounted Slick Tires & 12-Spoke Wheels (Blue Chrome) (2)
This is a pack of two optional LaTrax Pre-Mounted Slick Tires & 12-Spoke Wheels. Change up the look of your LaTrax Rally with these high traction slick tires, pre-mounted on custom blue chrome wheels.
This product was added to our catalog on September 7, 2021
