TRA3760, Traxxas Ultra Shocks (Long) (Black) (2)
This is a set of two replacement long shocks from Traxxas. Includes all parts to build two shocks.
This product was added to our catalog or updated on April 4, 2022
RCE6412, Racers Edge Li-Ion 7.4V 1300mAh Battery Pack (TYPE 18500) w/T-Plug for Blackzon Slyder
This product was added to our catalog on October 28, 2021
PTK-5350, ProTek RC Heavy Duty EC5 Charge Lead Adapter (Male EC5 to Female XT60)
The ProTek R/C Heavy Duty EC5 Charge Lead Adapter features a "male" EC5 connector with male bullets, connected to a female XT60. Thanks to the 4 inch long 14awg wire, this adapter can be used for heavy duty charging and can handle charge rates more than 20 amps. This adapter can also be used for ESC to battery connections in some applications, allowing you to connect your EC5 equipped battery to an ESC with an XT60.
This product was added to our catalog on December 16, 2021
TRA2998, Traxxas EZ-Peak Live 4S "Completer Pack" Multi-Chemistry Battery Charger w/One Power Cell 4S Batteries (6700mAh)
Traxxas EZ-Peak Live 4S "Completer Pack" Multi-Chemistry Battery Charger that includes One Power Cell 4S Battery. The pack includes one 4-cell 6700mAh iD LiPo battery. Traxxas iD batteries are the easiest and safest LiPo charging solution when used with Traxxas exclusive iD chargers. You just plug in your iD battery and press start. The iD charger handles all the settings and quickly gives you an optimized charge every time.
Features:
Charger Features:
75-Watt 8-amp high output
Easy to use interface with charge progress indicator and audible alerts
Automatically recognizes Traxxas iD® batteries for optimal charger settings
Optimized for faster LiPo balance charging
One-button LiPo storage charge protects your battery investment
Advanced high-resolution peak detection delivers a perfect charge
Built-in cooling fan
Advanced Mode for full manual control of charger settings
Built-in balance port for conventional LiPo batteries
Charges 5-8-cell NiMH Traxxas iD® Batteries
Charges 2S, 3S, and 4S LiPo Traxxas iD® Batteries
Battery Features:
Traxxas High-Current Connectors
Integrated LiPo Balance Charging Wires
Semi-Rigid Construction for efficient packaging
Oversized Discharge Tabs for minimum resistance
Hard-wired 12-gauge Maxx Cable soldered to cells
Center Wire Exit for guaranteed proper fitment
Charger Specifications:
AC Input: 100-240V, 50-60Hz, 1.2A
Charge Current Range: Up to 8A
Discharge Current Range: 500mA
Current Drain for Balance Ports: 500mA
NiMH Battery Cell Count: 5-8 Cells
LiPo Cell Count: 2-4 Cells
Net Weight: 365g
Dimensions: 121 x 161 x 54 mm
Includes:
(1) TRA2981 EZ-Peak Plus 4S Multi-Chemistry Battery Charger
(1) TRA2890X 6700mAh 14.8V 4-cell 25C LiPo battery
This product was added to our catalog on May 15, 2021
TRA5352X, Traxxas Revo Slipper Clutch Rebuild Kit
This is a replacement slipper plate and slipper clutch shoes for the Traxxas Revo and T-Maxx monster trucks.
This product was added to our catalog on May 7, 2021
TRA3642X, Traxxas 3x12mm Shoulder Screws (Ultra Shocks) (6)
This is a pack of six replacement Traxxas 3x12mm Shoulder Screws. These are the screws used with Traxxas Ultra shocks.
This product was added to our catalog on September 7, 2021
1747G - Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)
TRA1747G, NUTS 4MM FLANGED LOCK GREEN
This product was added to our catalog on September 7, 2021
TRA9495A, Traxxas Magnum 272R Assembled Transmission
QUICK FEATURES ON PRO SERIES MAGNUM 272R TRANSMISSION (9495A)
Redesigned transmission case
Reinforced for added strength and rigidity
Low-CG design for improved handling
Ultra-rigid wheelie bar mount
3.2 mm Aluminum Motor Plate
Increases structural rigidity
Improves heat dissipation
Compatible with fixed gear mesh system
Hardened-steel top shaft
Press-fit top gear for superior strength and durability
Sealed differential
Hardened-steel beveled gears
Tunable with silicone differential oil
Easy access differential
Simple removal for tuning and maintenance
This product was added to our catalog on October 19, 2021
BlackZon Slyder Monster Truck (MT) Turbo 1/16 4WD RTR 2S Brushless
4WD Shaft Driven Truck
Independent Double Wishbone Suspension
Adjustable Coilover Shocks
4-Gear Differentials Front & Rear
Metal Rear Drive Shafts
Gear Cover To Keep Debris Away From The Spur Gear
Dual Point Bell Crank Steering System
Servo Saver Built into Servo Horn
Complete Set of Ball Bearings
Splashproof Electronics
3800KV Brushless Motor
2.4GHz Radio with 2 in 1 Brushless ESC/Receiver - 2S Capable
2S 7.4V 1000mAh LiPo Battery w/ T-Plug connector
USB Charger
Speed Limiter using Speed Dial on Transmitter
Front LED Lights included in box (customer to fit if desired)
Wheelie Bar included in box (customer to fit if desired)
Notes:
2S Capable
Different model to Brushed car - Increased Range and Steering D/R
Features:
ESC: 2in1 Brushless ESC
Motor: 3800KV Brushless Motor
Servo: 3 Wire
Radio: 2.4GHz 2 Channel
Battery: 2S 7.4V LiPo - 1000mAh 25C
Charger: USB
Specifications:
Length (mm): 270
Width (mm): 215
Height (mm): 130
Wheelbase (mm): 175
This product was added to our catalog on November 11, 2023
PTK-8485, ProTek RC Exactness High Grip Hobby Knife (#11 Blade)
The ProTek RC Exactness High Grip Hobby Knife is a great option for cutting or trimming plastic, polycarbonate, rubber, paper and wood. The soft handle has a hex nut on the adjusting end to keep the handle from rolling away but still allowing for a comfortable round handle. Using number 11 blades, this hobby knife also features a blade cover for safe storage and transport. Package includes one hobby knife and one blade.
Features:
Sharp, Long lasting #11 blade
Soft, no slip handle
Non-roll design
Replacement blades available (PTK-8487)
This product was added to our catalog on September 30, 2022
TRA1726, Traxxas Antenna Kit (Blue)
This is a replacement antenna tube for Traxxas vehicles, such as the Traxxas Revo monster truck.
Included is one blue antenna tube, one black antenna cap and one black piece of tubing to hold the excess receiver antenna wire against the antenna tube.
This product was added to our catalog on July 19, 2021
HRAAC03EZ07, Hot Racing 1/10 Aluminum EZ Pulls w/Body Clips (Purple) (4)
The Hot Racing 1/10 Aluminum EZ Pulls with Body Clips are an optional accessory for any 1/10 scale to upgrade the body clips and add a little pop of color. The pulls are CNC machined from durable Aluminum for lasting performance and anodized a variety of colors for added strength and style. Attach the pulls to the included body clips to minimize the fumbling and struggle of removing the body from the mounting posts.
Features:
CNC Machine from durable Aluminum
Anodized a variety of colors
Remove body clips with ease
Specifications:
EZ pulls: 0.4 x 0.71 (10 x 18mm)
Body clips: 0.35 x 1.02 (08 x 22mm)
Includes:
(4) EZ Pulls
(8) Body clips
This product was added to our catalog on December 16, 2021
TRA8619, Traxxas E-Revo 2.0 Steel Heavy-Duty Steering Link Push Rods (2)
Traxxas E-Revo 2.0 Steel Heavy-Duty Steering Link Push Rods. Package includes two factory assembled push rods with rod ends and steel pivot balls.
Replacement part for these models:
E-Revo® VXL Brushless
This product was added to our catalog on May 7, 2021
TRA2922X, Traxxas Power Cell 6-Cell Stick NiMH Battery Pack w/iD Connector (7.2V/3000mAh)
This is the Traxxas "Power Cell" 6-Cell 3000mAh Stick NiMH Battery Pack with a Traxxas iD Connector. Traxxas iD Power Cell NiMH batteries are available in standard, 6-cell "flat" configuration, as well as 7-cell flat and "hump"-style packs to fit all Traxxas models. NiMH batteries are the standard battery type for radio control, and iD-equipped Power Cell NiMH packs are included with Traxxas electric models for excellent runtime and power delivery. Traxxas Power Cell Series 4 and 5 NiMH batteries offer increased capacity for even greater runtime and higher sustained voltage under load.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling.
Charging with a Traxxas iD Charger
The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus (TRA2970) recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus does all the work for you.
Features:
High-current connector
Gold-plated copper terminals
MAXX cable high-efficiency 12-gauge silicone jacketed wire
This product was added to our catalog on September 7, 2021
TRA5120, Traxxas 12X18X4mm Ball Bearing (2)
This is a set of replacement blue rubber shielded 12x18x4mm ball bearings for Traxxas vehicles.
This product was added to our catalog on May 7, 2021
TRA2971, Traxxas EZ-Peak Live Multi-Chemistry Battery Charger w/Auto iD (4S/12A/100W)
This is the Traxxas EZ-Peak Live Multi-Chemistry Battery Charger, with iD Auto Battery Identification. There has never been an easier or safer way to charge your batteries than with the Traxxas iD system. Now you can bring that technology to bear using your smartphone or tablet! Connect to the EZ-Peak Live app on your mobile device to experience a high definition graphical user interface. Your mobile device now becomes a powerful tool to check battery cell voltage, monitor charge status, create and store battery profiles, receive alerts, and access advanced user functions and information.
The EZ-Peak Live charger recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and the EZ-Peak Live does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Live Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Advanced high-resolution peak detection deliver a perfect charge every time. Parental lock function for worry-free iD-only charging, or full manual control through the free Traxxas EX-Peak Live app.
NOTE: Accessing some charger features requires a mobile device with Bluetooth® capability (sold separately) and the Traxxas EZ-Peak Live Application. Available here for iOS and here for Android.
Features:
Charger:
100-Watt 12-amp output
Recognizes Traxxas iD-equipped batteries to automatically program and optimize charger settings
LED charge progress indicator
Optimized for faster LiPo balance charging
One button LiPo storage charge protects your battery investment
Advanced high-resolution peak detection delivers a perfect charge
Easy to use interface
Supports Traxxas EZ-Peak Live Application
Audible alerts
Built-in cooling fan
Advanced Mode for full manual control through EZ-Peak Live App
Legacy support for all Traxxas High-Current Connectors
Built-in balance port for conventional LiPo batteries
Charges 5-8-cell NiMH batteries
Charges 2s, 3s, and 4s LiPo Batteries
EZ-Peak Live App:
Check battery cell voltage, estimated time remaining, and mAh added
Configure charge settings with an easy-to-use graphical interface
Recognizes and remembers settings for up to 4 connected chargers
Pass code lock prevents access to manual mode
Create Battery Profiles and store commonly used settings
Upload firmware updates to charger to get the latest features
Remote monitoring and alerts for up to 4 chargers
iD mode may be switched off through the EZ-Peak Live Application for charging first-generation Traxxas batteries with non-iD High-Current Connectors
Click here for iOS App
Click here for Android App
Specifications:
AC Input: 100–240 Volts, 50-60Hz, 1.5A
Charge Current Range: 1.0-12.0A
Discharge Current Range: 665mAh
Current Drain For Balance Ports: 665mAh
NiMH Battery Cell Count: 5–8 Cells
LiPo Cell Count: 2–4 Cells
Net Weight: 526g
Dimensions: 133 x 169 x 55mm
This product was added to our catalog on May 7, 2021
PRO279403, Pro-Line Showtime+ Wide Drag Spec Rear Drag Racing Wheels (2) w/12mm Hex (Black)
Pro-Line Showtime+ Wide Drag Spec Rear Drag Racing Wheels are a perfect fit for Pro-Line's new Reaction+ HP Wide SC tires (PRO10188-203), but this wheel is also designed to fit standard width 2.2"/3.0" SC tires using the extra inner bead channel. Showtime+ wheels are strong and lightweight 12mm hex wheels making them the ideal choice for performance drag racing. The wheel offset is ideal for Losi 22S No Prep Drag Car, 2wd Slash trucks converted to no-prep Drag Racing cars and the AE DR10. The Showtime+ Wide SC Drag wheel and every other wheel that Pro-Line makes is proudly Made in the USA.
Features:
Wide SC Format Wheel Perfect Size for Pro-Line's Reaction+ HP Wide SC Tires (PRO10188-203)
Also fits Standard Width 2.2"/3.0" SC tires Using the Extra Inner Bead Channel
Scale Spoke Detail that Mimics Full-Size Drag Wheels
Strong and Lightweight for Maximum Performance
12mm Hex Wheel for Use with Losi® 22S™ No Prep Drag Car, Slash® and AE DR10
Made in the USA, since 1982
Specifications:
Height: 3.22" (82mm)
Width: 1.90" (48mm)
Includes:
(2) Showtime+ Wide SC / Standard SC 2.2"/3.0" Black Rear Wheels
This product was added to our catalog on June 21, 2021
TRA8378, Traxxas 4-Tec 2.0 1.9" Front & Rear Pre-Mounted Drift Tires (Black Chrome) w/12mm Hex Split-Spoke Wheels (4)
Tires and wheels, assembled, glued (split-spoke black chrome wheels, 1.9" Drift tires) (front and rear)
1.9” hard-compound plastic tires provide the perfect combination of durability and breakaway potential for any drifting surface. Tough enough for carpet, concrete, and even asphalt, these tires hold up battle after battle. Drift tires come pre-mounted and glued on black chrome Split-Spoke front and rear wheels. Sold as a set of four.
Accessory part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Ford® GT
Ford® Mustang GT
This product was added to our catalog on September 7, 2021
TRA7794, Traxxas X-Maxx/XRT Transmission Cush Drive Elastomer Damper
This is the Traxxas Transmission Cush Drive Elastomer Damper for the Traxxas X-Maxx or XRT. This system requires the Cush Input Shaft (TRA7786X).
This product was added to our catalog on May 7, 2021
TRA7792, Traxxas X-Maxx/XRT Heavy Duty Ring Gear Gear (35T)
This is a replacement 35-tooth heavy duty differential ring gear for the Traxxas X-Maxx or XRT. Designed for use with front or rear heavy duty 11-tooth differential pinion gears (#TRA7790 & #TRA7791). Package contains one ring gear.
This product was added to our catalog on September 7, 2021
TRA6449X, Traxxas Mod 1.0 Spur Gear (54T)
Replacement part for these models:
X-Maxx®
Accessory part for these models:
Maxx®
This product was added to our catalog on September 7, 2021
TRA5119A, Traxxas 10x15x4mm Ball Bearing (2)
Traxxas 10x15x4mm Ball Bearing. These bearings are used in a variety of Traxxas models. Package includes two rubber sealed bearings.
Traxxas Hoss
Traxxas Maxx
Traxxas Rally
Traxxas Rustler 4x4
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas TRX-4
Traxxas TRX-4
Traxxas Telluride 4x4
This product was added to our catalog on September 7, 2021
TRA7641, Traxxas LaTrax Spur Gear (61T)
This is a replacement Traxxas LaTrax 61 Tooth Spur Gear for use with the LaTrax 1/18 Desert Runner and 1/18 Teton.
This product was added to our catalog on September 7, 2021
TRA5261, AIR FILTER INSERT FOAM (3)
Air filter inserts, foam (3) (pre-oiled) (TRX® 2.5, 2.5R, 3.3)
This product was added to our catalog on September 7, 2021
DSC-CS3-LF1, DS Racing Competition III Slick Drift Tires (4) (LF-1)
The DS Racing Competition III Slick Drift Tires are precision made to be more round and better balanced. These tires are available in different compounds allowing you to tune the tire to your driving surface. Package includes four tires and four foam inserts.
Features:
Precision made for better tolerances
Includes foam inserts
Specifications:
Width: 25mm
Compounds:
LF-5T - Smooth Asphalt or Terrazzo (Hardest)
LF-4 - Polish Concrete and Carpet (Hard)
LF-3 - P-Tile, Painted Floor and Epoxy (Medium)
LF-2 - Tile, Epoxy and Asphalt (Medium-Soft)
LF-1 - Smooth Asphalt, Tile and Epoxy (Soft)
LF-1T - Smooth Asphalt, Tile and Epoxy (Soft)
This product was added to our catalog on May 13, 2022
HWA30112003, Hobbywing Xerun XR10 Justock G3 1/10 Sensored Brushless ESC
The Hobbywing XERUN XR10 Justock G3 1/10 Sensored Brushless ESC is the next level in zero timing spec racing. The timing in this ESC has been fixed to a permanent 0° to comply with stock class racing. Package includes one Justock ESC.
Features:
Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
Programmable via OTA Bluetooth module or 3in1 program box
Built-in capacitor module eliminates the need for external capacitors and unwanted space
RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
Calibration or preforming a factory-reset can be achieved by using this SET button. Simple and easy to use
Supports both CCW (counterclockwise) and CW (clockwise) motor directions
Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
Supports ESC firmware upgrades
User-friendly and convenient for set-up
Specifications:
Continuous Current: 60A
Burst Current: 380A
Battery: 2S Lipo (Only 2S)
Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
ESC programming: Independent programming port
Motor Supported: Sensor and sensorless brushless motor
Motor Limit: 10.5T 3650 Motor
Application: 1/10, 1/12 On-road and Off-road
Cooling Fan: Powered by BEC
Size: 40.9x33.9x32.1mm (LxWxH)
Weight: 75.4g (Including weight of wire)
This product was added to our catalog on May 3, 2023
TRA7758A, Traxxas Sledge/X-Maxx/E-Revo VXL 17mm Splined Wheel Nut (Black) (4)
Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with Traxxas-tough durability.
This product was added to our catalog on September 7, 2021
TRA8672, Traxxas Talon EXT 3.8" Pre-Mounted E-Revo 2.0 Tires w/17mm Hex (2) (Black)
This is a pack of two replacement Traxxas Talon EXT 3.8" Tires, Pre-Mounted to Black wheels with a splined 17mm hex. These tires have been glued to the wheel and include an inner foam insert. Just install and go! TSM Rated.
NOTE: These wheels only fit the Traxxas Splined 17mm Axle Hexes; they will not work with standard 17mm hexes.
This product was added to our catalog on May 7, 2021
TRA6842, Traxxas .8 Mod Spur Gear (50T) (Slash 4x4)
Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
Accessory part for these models:
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
This product was added to our catalog on September 7, 2021
TRA2065A, Traxxas Servo, Sub-Micro, Waterproof
Replacement part for these models:
1/18 LaTrax® Desert Prerunner
1/18 LaTrax® Rally
1/18 LaTrax® Teton®
Summit
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-4® 2021 Ford® Bronco
TRX-4® Mercedes-Benz® G 500® 4X4²
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
Accessory part for these models:
TRX-4® Equipped with Traxx®
TRX-4® Sport Unassembled Kit
TRX-4® Sport
This product was added to our catalog on September 7, 2021
TRA8715X, Traxxas Speed Bit 1/4" Drive Hex Driver Set (4)
This is a Traxxas 4-Piece Speed Bit 1/4" Hex Driver Set.
This set includes:
1.5mm
2.0mm
2.5mm
3.0mm
This product was added to our catalog on July 30, 2021
TRA5042, Traxxas Differential Oil (1,000,000cst)
This differential oil can be used for a variety of vehicle types. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds. Changing the oil in your differentials is one of the most important tuning options for off-road buggies. Please select the weight you need from the list above.
This product was added to our catalog on August 12, 2021
HRASJT253, Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T)
This is the Hot Racing Steel 32 Pitch, 53 Tooth Spur Gear with grey hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.
Features:
CNC machined and lightened hardened steel construction
Black oxide coating for durability and corrosion resistance
Grey-colored countersunk washers
Specifications:
Number of Teeth: 53
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: 6mm (0.24 inch)
Internal diameter: ~11mm (~0.43 inch)
Includes:
54 tooth 32 pitch spur gear
(3) mounting screws
(3) grey-colored countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
Requires:
Hardened clutch bell or pinon gear
Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
This product was added to our catalog on December 16, 2021
