PTK-5232, ProTek RC EC3 Style to Large Tamiya Style Plug Adapter (Male EC3/Female Tamiya)
This is a male EC3 style plug to female Tamiya style plug adapter from ProTek R/C.
This product was added to our catalog on December 16, 2021
PTK-130T, ProTek RC 130T Standard Digital "High Torque" Metal Gear Servo (High Voltage)
This is the ProTek R/C 130T Digital Hi-Torque Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 130T High Voltage Hi-Torque servo delivers an incredible 288 oz-in of torque with a 0.10 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 355 oz-in and 0.08! Spec's like these make this servo an excellent choice for any 1/10 to 1/8 scale vehicle application. Other features include a full metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, a coreless motor and an aluminum middle case that helps to dissipate heat and helps to increase efficiency.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Warning! This ProTek R/C servo requires that you use a m3x10mm screw to attach the servo horn to the output shaft. If you choose to use another screw, be sure to use a 10mm length screw. Use of a shorter screw can cause failure and will void your warranty.
Features:
Ideal for any 1/10 to 1/8 scale vehicle application
Aluminum middle case
High voltage circuitry
0.10 transit speed, and 288 oz-in of torque @ 6.0V
0.08 transit speed, and 355 oz-in of torque @ 7.4V
Aluminum single arm servo horn
Full metal gears and dual ball bearings
200mm long 22awg connector wire w/gold plated connectors
Coreless motor
Servo Model
130T
Recommended Application
1/10 to 1/8 scale surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.10/60° sec
Operating Speed @ 7.4V
0.08/60° sec
Dynamic Torque @ 6.0V
288 oz-in (20.7 kg-cm)
Dynamic Torque @ 7.4V
355 oz-in (25.6 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
61g
Pulse/Frequency
1520?s / 333hz
This product was added to our catalog on December 16, 2021
PTK-1540, ProTek RC "TruShield" RC Car Detail Spray (13oz)
This is a 13 ounce can of ProTek R/C "TruShield" RC Car Detail Spray. ProTek R/C understands that how your ride looks is as important as how well it performs. We all want to shine, but a clean car is not all about showing off; dirt and grime can slow a car down, kill bearings and lower overall performance. Sometimes running at your peak can just be a wash away.
The ProTek R/C TruShield is a one step easy to use product that provides a quick detail shine. Designed to be used on all surfaces of your dirt machine, TruShield provides a glossy protective coating that is dry to the touch when used as directed. It can be sprayed on plastic, metal, rubber and chrome. The product is user friendly, simple to use, dries fast and will not leave an oily residue or sticky finish. Simply spray on a cloth or vehicle and wipe to a shine! It’s the fastest and easiest way to detail and shine your dirt machines. TruShield thoroughly and effectively shines and promotes luster, and will not attract dirt, dust or general grime.
Use Recommendations:
Use as the final step after cleaning your car or when you want to add a "Tru" shine to your equipment. Shake well and spray a light coat onto your surface, or spray onto clean cloth and allow to penetrate for a few minutes. Wipe off to leave an even film. Remove any excess residue.
When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what.
This product was added to our catalog on December 16, 2021
PTK-5201, ProTek RC T-Style Ultra Plug Male Device Pigtail (10cm, 14awg wire) (1)
This is a male T-style ultra plug pigtail from ProTek R/C. The ultra plug is connected to 10cm of 14awg silicone wire.
This product was added to our catalog on October 29, 2007
PTK-160TBL, ProTek RC 160TBL "Black Label" Low Profile High Torque Brushless Servo
Brushless servo technology has improved by leaps and bounds. Finally, brushless servos can deliver holding power, speed and precision that can compete with a coreless servo. Combine that with the superior efficiency and lifespan of a brushless motor and you have a servo that hits all the marks, with the performance and quality required for a pro level build.
A black anodized aluminum case with aluminum and gold accents give this servo a stealthy look that sets it apart from the rest. The aluminum upper case provides bomb proof durability and the heat sink center case offers efficient heat dissipation and helps to reduce weight. An aluminum, single arm clamping servo horn is included, as well as a full set of servo mounting washers for a rock solid and durable installation.
NOTE: If you experience glitching or poor performance while using a Futaba transmitter, you must turn off BLS mode. BLS mode is only compatible with Futaba BLS type servos.
Features:
Used by Ryan Maifield to win the 2019 Roar 4wd Off-Road National Championships
Ideal for any 1/10 to 1/8 surface application that can benefit from a low profile configuration
Full aluminum black anodized case
High voltage circuitry
0.08 transit speed, and 230 oz-in of torque @ 6.0V
0.06 transit speed, and 290 oz-in of torque @ 7.4V
Includes aluminum single arm clamping servo horn and servo mounting washers for a rock solid installation
140mm long servo lead
Full metal gears and dual ball bearings
Brushless motor
Servo Model
160TBL
Recommended Application
1/10 to 1/8 Scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.08/60° sec
Operating Speed @ 7.4V
0.06/60° sec
Dynamic Torque @ 6.0V
230 oz-in (16.5 kg-cm)
Dynamic Torque @ 7.4V
290 oz-in (20.9 kg-cm)
Motor Type
Brushless
Output Shaft
25 Tooth
Gears
Metal
Weight
55g
Pulse/Frequency
1520?s / 333hz
Dimensions
39.5x20x30.6mm
Length (Bottom to Mount)
19.35mm
This product was added to our catalog on May 23, 2023
PTK-160T, ProTek RC 160T Low Profile High Torque Metal Gear Servo High Voltage/Metal Case
This is the ProTek R/C 160T Low Profile Digital "High Torque" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 160T High Voltage Low Profile servo delivers an incredible 216 oz-in of torque and 0.08 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 274 oz-in and 0.06! Spec's like these make this servo an excellent choice for any 1/12 to 1/10 scale vehicle application. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 160mm long 22awg connector wire with gold plated connectors, and a coreless motor.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. And for additional rigidity, four blue aluminum servo ear guides are included as alternatives to the rubber grommets. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Features:
Low-Profile case saves space and weight
Ideal for any 1/12 to 1/10 scale vehicle application
Full aluminum case
High voltage circuitry
0.08 transit speed, and 216 oz-in of torque @ 6.0V
0.06 transit speed, and 274 oz-in of torque @ 7.4V
Aluminum single arm servo horn
Full metal gears and dual ball bearings
160mm long 22awg connector wire w/gold plated connectors
Coreless motor
Servo Model
160T
Recommended Application
1/12 to 1/10 scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.08/60° sec
Operating Speed @ 7.4V
0.06/60° sec
Dynamic Torque @ 6.0V
216 oz-in (15.5 kg-cm)
Dynamic Torque @ 7.4V
274 oz-in (19.7 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
54.5g
Pulse/Frequency
1520?s / 333hz
Dimensions
39.5x20x30.3mm
Length (Bottom to Mount)
19.10mm
This product was added to our catalog on December 16, 2021
The ProTek RC Mini Magnetic Parts Bowl is a great option to help keep your pit area or work station organized. Make maintenance easier by giving yourself a convenient place to lock in hardware, hinge pins, bearings and more! The bowl features a polished finish with a laser etched ProTek logo for killer looks. A rubber coating on the magnetic base prevents scratching up finished surfaces. Pick up the ProTek RC Magnetic Parts Bowl and help keep your parts in check.Features:
Great for pit/work area organization
Magnetic base allows for convenient storage of hardware, hinge pins and more!
Polished finish with laser etched ProTek logo for a classy finish
Specifications:Outer Lip Diameter: 3" (76.2mm)Base Diameter: 2" (50.8mm)
PTK-5213, ProTek RC Receiver Charge Lead (Futaba Female to 4mm Banana Plugs)
This is one receiver charge lead lead from ProTek R/C. This charge lead has a Futaba style battery connector on one end that will accept both Futaba and JR/Airtronics style battery connectors, connected to 4mm banana plugs with high quality 22awg silicone wire.This product was added to our catalog on July 6, 2021
PTK-5611, ProTek RC 10awg Black Silicone Hookup Wire (1 Meter)
The ProTek RC Silicone Hookup Wire is an excellent option for use in a variety of applications. Made from a high strand count, this wire is designed to be flexible during use and to resist work hardening. This wire is available in multiple colors and gauges. Please select the gauge wire you need from the list above. Package includes one length of wire.
This product was added to our catalog on April 16, 2021
PTK-160SS, ProTek RC 160SS Low Profile Super Speed Metal Gear Servo High Voltage/Metal Case
This is the ProTek R/C 160SS Low Profile Digital "Super Speed" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 160SS High Voltage Low Profile servo delivers an incredible 127 oz-in of torque and 0.05 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 152 oz-in and 0.04! Spec's like these make this servo an excellent choice for any 1/12 to 1/10 scale vehicle application. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 160mm long 22awg connector wire with gold plated connectors, and a coreless motor.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. And for additional rigidity, four blue aluminum servo ear guides are included as alternatives to the rubber grommets. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Features:
Low-Profile case saves space and weight
Ideal for any 1/12 to 1/10 scale vehicle application
Full aluminum case
High voltage circuitry
0.05 transit speed, and 127 oz-in of torque @ 6.0V
0.04 transit speed, and 152 oz-in of torque @ 7.4V
Aluminum single arm servo horn
Full metal gears and dual ball bearings
160mm long 22awg connector wire w/gold plated connectors
Coreless motor
Servo Model
160SS
Recommended Application
1/12 to 1/10 scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.05/60° sec
Operating Speed @ 7.4V
0.04/60° sec
Dynamic Torque @ 6.0V
127 oz-in (9.1 kg-cm)
Dynamic Torque @ 7.4V
152 oz-in (11 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
54.5g
Pulse/Frequency
1520?s / 333hz
This product was added to our catalog on March 19, 2021
PTK-5072, ProTek RC QS8 Anti-Spark Connector (1 Female)
ProTek RC QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.
The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage. NOTE: T-style connector shown in photos is for size reference only, and is not included.
Features:
Anti-Spark Technology Increases Lifespan of Connector
110A Constant/300A Peak Current Rating
8.0mm Gold Plated Brass Bullet
Great for all High Voltage Applications
Nylon/Fiber Composite Housing
Package Includes One Female Connector & Wire Cap
Specifications:
Connector Diameter: 8.00mm
Metal Material: Gold Plated Brass
Plastic Material: Fiber Nylon Composite
Flame retardant rating: UL94 V2
Temperature Range: 200C Max
Rated Voltage: 600V DC
Continuous Current: 110A
Peak Current: 300A
Weight: 20g ea (40g Male+Female Set)
Length: 37.5mm w/end cap
Width: 28mm
Total Length When Connected: Approx 70mm (Male & Female w/End Cap)
Max Wire Gauge: 6awg
Includes:
(1) QS8 Female Anti-Spark Connector
(1) Wire Cap
This product was added to our catalog on March 24, 2021
1UP190436, 1UP Racing Heatsink Bullet Plug Grips w/5mm Bullets (Black/Red)
The 1UP Racing 5mm Bullets w/Heatsink Bullet Plug Grips are perfect for adding a little extra bling and improved grip to your battery leads. Easy setup and secure locking make for a perfect alternative to standard bullet connectors.
Includes:
(2) 5mm bullets
(2) Plug grips
(2) 3mm set screws
This product was added to our catalog on December 16, 2021
PTK-2114, ProTek RC 2 Pin JST Extension Lead to JR Servo Style Plug (200mm) (Male/Female)
The ProTek R/C 2 Pin JST Extension Lead to JR Servo Style Plug is a replacement for ProTek Aluminum Fans (PTK-2111 & PTK-2112). This can also be used to adapt any JST female connector to a 3-pin JR style connector for connection to a receiver or other applications. Package includes one 200mm long extension adapter cable.
This product was added to our catalog on March 2, 2022
PTK-5073, ProTek RC 8.0mm "Super Bullet" Solid Gold Connectors (2 Male)
The ProTek RC 8.0mm "Super Bullet" Solid Gold Connectors. The ProTek R/C "Super Bullet" Solid Gold Connectors are an absolute must for high current / high voltage applications! With lower resistance than a typical T-style plug and traditional spring-type bullet connectors, they are the standard for brushless applications. Package includes two bullet connectors.
This product was added to our catalog on June 15, 2022
PTK-5322, ProTek RC Heavy Duty T-Style Ultra Plug RACE Lead (Female Plug to 5mm Bullet)
This is a ProTek R/C Heavy Duty Ultra Plug™ RACE Lead, with a genuine Female Ultra Plug™ to 5mm Bullet Plugs. Use this lead to connect any battery with 5mm sockets to an ESC with a Deans plug. Using a genuine Deans Ultra Plug™, ProTek R/C 5.0mm "Super Bullet" Solid Gold Connectors and 10awg wire, this pre-built lead will provide you with a low resistance connection for any 2S race and bashing application.
This product was added to our catalog on December 16, 2021
PTK-5022, ProTek RC 5.0mm "Super Bullet" Solid Gold Connectors (4 Male)
This is a pack of four male ProTek R/C 5.0mm "Super Bullet" Solid Gold Connectors. The ProTek R/C "Super Bullet" Solid Gold Connectors are an absolute must for high current / high voltage applications! With lower resistance than a typical T-style plug and traditional spring-type bullet connectors, they are the new standard for brushless applications. They can be used for battery connectors that require a 5mm bullet, as well as motor to speed control connectors.
This product was added to our catalog on December 16, 2021
PTK-1630, ProTek RC "TruGrip" Light Traction Tire Compound (4oz)
This is a 4 ounce bottle of ProTek R/C "TruGrip" Light Traction Tire Compound. There is no such thing as too much grip and ProTek R/C is here to provide it with their specially formulated TruGrip line of tire traction compounds. Available in three different compounds to suit a variety of conditions, TruGrip has you covered with their Light, Medium and Maximum compounds for you to choose from. For on-road, off-road, rubber or foam tires, TruGrip is the sauce for your winning recipe.
The ProTek R/C TruGrip Light Compound is ideal for mild applications when a slight increase in traction is desired. It is a great solution for hard, fast tracks and hotter outdoor ambient temperatures; great for loose, dusty and sandy conditions. The Light compound is the least "potent" of the three compounds.
ProTek RC "TruGrip" Traction Compounds For RC Tires: AMain Hobbies' RC Talk
TruGrip Compounds:
Light: Hotter temperatures, hard-packed fast dry dusty tracks
Medium: Moderate temperatures, marginal tracks, light moisture or dry slick conditions
Maximum: Cool temperatures, damp or wet extra slick tracks
When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what.
This product was added to our catalog on December 16, 2021
PTK-8416, ProTek RC "TruTorque SL" Metric Hex Driver Set (4) (1.5mm, 2.0mm, 2.5mm, 3.0mm)
Features:
CNC machined knurled aluminum handle with relief holes
Rotating aluminum end cap
Durable, precision cut, 80mm long HSS Steel tip
Tip size is etched in three places on the handle for easy identification
Includes:
(1) 1.5mm Hex Driver
(1) 2.0mm Hex Driver
(1) 2.5mm Hex Driver
(1) 3.0mm Hex Driver
This product was added to our catalog on December 16, 2021
PTK-7650, ProTek RC NiZn USB Battery Charger (4 Slots) (AA/AAA)
Introducing the ProTek RC Nickel-Zinc (NiZn) USB Battery Charger. This charger is designed for charging up to four AA or AAA NiZn batteries simultaneously. Specifically designed for NiZn batteries, it ensures proper charging and battery maintenance. NiZn batteries are known for their higher voltage compared to traditional NiMH batteries, so using a charger specifically for NiZn is important for safety and efficiency. This charger is equipped with red and green LED indicators for ease of use, letting you know in real time when your batteries are fully charged and ready for action. The USB design makes it convenient to plug into wall adapters, USB cubes, and even power banks which gives you the option for on-the-go charging.
Note: This charger is specifically designed for NiZn batteries and is not compatible with NiMH or NiCD type batteries. Please do not use this charger with any other type of battery except NiZn AA & AAA.
Features:
Charges up to four AA or AAA NiZn batteries simultaneously
USB connection allows flexibility in using various power sources
Specifically designed for NiZn batteries, ensuring safe and efficient charging
Red and green LED indicator lights for real time charging updates
Lightweight and portable design makes it easy to transport
Specifications:
Input Voltage: 5V
Output Voltage: 1.88V
Compatibility: AA/AAA (NiMH or NiCD)
Charging Indicator: LED (Red/Green)
Includes:
(1) NiZn USB Battery Charger
(1) USB Cable
Needed to Complete:
(1) USB Outlet Adapter or USB Power Bank
This product was added to our catalog on March 24, 2021
PTK-5012, ProTek RC Female T-Style Ultra Plugs (4)
This is a pack of female T-style ultra plugs from ProTek R/C. There are total of four female connectors in the package, along with one piece of heat shrink tubing.These connectors are designed to easily handle in excess of 50A of continuous current.ProTek R/C is an AMain Sports & Hobbies brand.
This product was added to our catalog on December 16, 2021
