ProTek RC
ProTek RC PTK-5048, ProTek RC Tamiya Connector Set (1 Male/1 Female)
PTK-5048, ProTek RC Tamiya Connector Set (1 Male/1 Female)This product was added to our catalog on December 16, 2021
$1.99
ProTek RC PTK-5055, ProTek RC 4" Tamiya Plug w/Pigtail (1 Male) (14awg)
PTK-5055, ProTek RC 4" Tamiya Plug w/Pigtail (1 Male) (14awg)This product was added to our catalog on December 16, 2021
$1.99
ProTek RC PTK-8066, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (13T)
PTK-8066, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (13T) This product was added to our catalog on December 16, 2021
$5.99
ProTek RC PTK-8067, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (14T)
PTK-8067, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (14T)This product was added to our catalog on December 16, 2021
$5.99
ProTek RC PTK-8072, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (19T)
PTK-8072, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (19T)This product was added to our catalog on December 16, 2021
$5.99
ProTek RC PTK-5550, ProTek RC 1S High Capacity Sanwa M17 LiPo Transmitter Battery (3.7V/5500mAh)
PTK-5550, ProTek RC 1S High Capacity Sanwa M17 LiPo Transmitter Battery (3.7V/5500mAh)This product was added to our catalog on December 16, 2021
$57.99
ProTek RC PTK-2034, ProTek RC Aluminum Turnbuckle Wrench Set (3, 3.2, 3.5, 3.7, 4, 5, 5.5 & 6mm)
PTK-2034, ProTek RC Aluminum Turnbuckle Wrench Set (3, 3.2, 3.5, 3.7, 4, 5, 5.5 & 6mm) This product was added to our catalog on December 16, 2021
$39.99
ProTek RC PTK-7823-BK, ProTek RC Aluminum Flat Clamping Servo Horn (Black) (25T-ProTek)
PTK-7823-BK, ProTek RC Aluminum Flat Clamping Servo Horn (Black) (25T-ProTek) This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place, increasing your chances of finishing the race! Plus, the horn has a 3.5mm thick arm for durability, with 16.5mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one black anodized servo horn, 3x10mm button head screw, 2x7.5mm clamp screw and a star lock washer. Features: Clamp design 16.5mm and 20mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center) 3.5mm thick arm 31mm Overall length Linkage holes threaded for 3mm hardware 25T Spline ProTek Output Shaft This product was added to our catalog on December 16, 2021
$11.99
ProTek RC PTK-5365, ProTek RC 2S Charge/Balance Adapter (5mm Bullet Connectors to Female XT90) (12awg) (7pin XH balance plug)
PTK-5365, ProTek RC 2S Charge/Balance Adapter (5mm Bullet Connectors to Female XT90) (12awg) (7pin XH balance plug) ProTek RC 2S Charge Balance Adapter. This adapter is designed to work with the Junsi iCharger 456DUO and 458DUO for charging 2S 5mm bullet batteries. Package includes one charge lead. This product was added to our catalog on February 27, 2024
$9.99
Exclusive R/C ERC8-DC-1035, Exclusive RC Non Functional Drag Racing Parachute (Black)
ERC8-DC-1035, Exclusive RC Non Functional Drag Racing Parachute (Black) The Exclusive RC Non Functional Drag Racing Parachute is an accurately scaled down replica of a 1:1 drag racing parachute. Manufactured with real chute bag material, and an included chute tag, this is a great way to finish off the back end of your street eliminator/no prep car. Available in multiple colors. Installation requires the Exclusive RC Drag Chute Mount (not included). A variety of mounts are available to mount various body types and styles. Specifications:Dimensions:Length: 30mmWidth: 30mmHeight: 30mm This product was added to our catalog on February 2,2024
$47.24
ProTek RC PTK-7825, ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T)
PTK-7825, ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T) The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 20mm and 16mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one standard length servo horn, one 3x10mm button head screw and one 2x7.5mm clamp screw.Features: Clamp design 20mm & 16.0mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center) 4.0mm thick arm 33mm Overall End to End length Linkage holes threaded for 3mm hardware 25T Spline Futaba/Savox/ProTek Output Shaft Unique Mounting Screw: PTK-H-1218 This product was added to our catalog on September 2, 2022
$12.99
ProTek RC PTK-5206, ProTek RC Heavy Duty 60cm (24") Servo Extension Lead (Male/Female)
PTK-5206, ProTek RC Heavy Duty 60cm (24") Servo Extension Lead (Male/Female)This product was added to our catalog on December 16, 2021
$3.69
ProTek RC PTK-5014, ProTek RC 5.5mm "Super Bullet" Solid Gold Connectors (3 Male/3 Female)
PTK-5014, ProTek RC 5.5mm "Super Bullet" Solid Gold Connectors (3 Male/3 Female)This product was added to our catalog on December 16, 2021
$5.99
ProTek RC PTK-5308, ProTek RC 2S Charge/Balance Adapter Cable (XT60 Plug to 4mm Bullet Connector)
PTK-5308, ProTek RC 2S Charge/Balance Adapter Cable (XT60 Plug to 4mm Bullet Connector) This is a "TruCurrent" XT60 Plug to 4mm Bullet Connector 2S balance adapter cable from ProTek R/C. ProTek R/C "TruCurrent" XT60 connectors ensure a mechanically solid, low resistance, high-amp capacity connection and are the ideal power connector for high current applications. This product was added to our catalog on December 16, 2021
$8.99
ProTek RC PTK-8202, ProTek RC "TruTorque" 4-in-1 Multi-Wrench
PTK-8202, ProTek RC "TruTorque" 4-in-1 Multi-WrenchThis product was added to our catalog on December 16, 2021
$16.79
ProTek RC PTK-8245, ProTek RC "TruTorque" Power Tool Tip (1.5mm)
PTK-8245, ProTek RC "TruTorque" Power Tool Tip (1.5mm)This product was added to our catalog on December 16, 2021
$8.49
ProTek RC PTK-8246, ProTek RC "TruTorque" Power Tool Tip (2.0mm)
PTK-8246, ProTek RC "TruTorque" Power Tool Tip (2.0mm)This product was added to our catalog on December 16, 2021
$8.39
ProTek RC PTK-5037, ProTek RC 4.5mm "TruCurrent" XT90 Polarized Battery Connectors (4 Female)
PTK-5037, ProTek RC 4.5mm "TruCurrent" XT90 Polarized Battery Connectors (4 Female) This product was added to our catalog on December 16, 2021
$6.39
ProTek RC PTK-5039, ProTek RC 4.5mm "TruCurrent" XT90 Polarized Connectors (2 Male/2 Female)
PTK-5039, ProTek RC 4.5mm "TruCurrent" XT90 Polarized Connectors (2 Male/2 Female) This product was added to our catalog on December 16, 2021
$6.29
ProTek RC PTK-7809, ProTek RC 4mm Aluminum Short Clamping Servo Horn (Blue) (23T-JR/Sanwa/KO)
PTK-7809, ProTek RC 4mm Aluminum Short Clamping Servo Horn (Blue) (23T-JR/Sanwa/KO)This product was added to our catalog on December 16, 2021
$12.99
ProTek RC PTK-5319, ProTek RC Receiver Balance Charge Lead (2S to 4mm Banana w/4S Adapter)
PTK-5319, ProTek RC Receiver Balance Charge Lead (2S to 4mm Banana w/4S Adapter)This product was added to our catalog on December 16, 2021
$11.99
ProTek RC PTK-1620, ProTek RC "TruGrip" Medium Traction Tire Compound (4oz)
PTK-1620, ProTek RC "TruGrip" Medium Traction Tire Compound (4oz)This product was added to our catalog on December 16, 2021
$9.59
ProTek RC PTK-7800-BK, ProTek RC 4mm Aluminum Long Clamping Servo Horn (Black) (25T)
PTK-7800-BK, ProTek RC 4mm Aluminum Long Clamping Servo Horn (Black) (25T) This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances of finishing the race! Additionally, the arm is 4mm thick for durability, has 19.75mm & 24.25mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles. Features: Clamp design 19.75mm & 24.25mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center) 4mm thick arm 35.5mm Overall length Linkage holes threaded for 3mm hardware 25T Spline Futaba/Orion/Savox/ProTek Output Shaft This product was added to our catalog on December 16, 2021
$12.99
ProTek RC PTK-7808-BK, ProTek RC 4mm Aluminum Short Clamping Servo Horn (Black) (25T)
PTK-7808-BK, ProTek RC 4mm Aluminum Short Clamping Servo Horn (Black) (25T) This product was added to our catalog on December 16, 2021
$12.99
ProTek RC PTK-2109, ProTek RC Braided Brushless Motor Sensor Cable (300mm)
PTK-2109, ProTek RC Braided Brushless Motor Sensor Cable (300mm) This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness. The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a free moving and shock absorbing sensor cable while ensuring smooth, consistent and reliable data transfer between your ESC and motor. This product was added to our catalog on March 16, 2021
$5.99
ProTek RC PTK-5335, ProTek RC 2S-6S 4-Battery Parallel Charger Board (T-Style/JST-XH)
PTK-5335, ProTek RC 2S-6S 4-Battery Parallel Charger Board (T-Style/JST-XH) This is the ProTek R/C 2S-6S 4-Battery Parallel Charger Board. Do you have a lot of batteries that take forever to charge? The ProTek R/C Parallel Charge Board will charge up to four LiPo batteries simultaneously, and also balance the individual cells of each battery during the charge process. If charging four batteries simultaneously doesn't satisfy demands, two Parallel Charge Boards can be daisy chained to charge eight batteries at once! Be Advised: Some newer batteries (like some GensAce) come with balance plug protectors which are slightly bulky and do not properly fit this board. You will need to remove the protector or find an alternative method. The Parallel Charger Board is also compatible with Li-Ion and LiFe Batteries. Of course, the battery charger must be compatible for the chosen battery chemistry and only that battery chemistry can be charged at once with the board (example: don't mix LiPo's with LiFe's). Additionally, the parallel charge process only works when charging batteries of the same cell count, similar age and of similar discharge states. But as long as these needs are met, plug in your batteries' T-Style/Deans power connector (or adapter) and the XH balance plug to the Parallel Charge Board, and let the juice flow. Other features include an impact resistant custom molded plastic hard case, replaceable DC input fuse, replaceable battery port fuses, and self-resetting polyfuses protecting all balance ports. Important Parallel Charging Rules: Only the same battery chemistry can be charged at once (don't mix LiPo's with LiFe's, etc.) Only same celled Lithium batteries can be charged at once (don't mix 4S with 6S, etc.) Only charge batteries with similar states of discharge (within 0.2V) Always program the charger to the total capacity of all attached batteries (if charging four 5000mAh batteries, set the charger to 20,000mAh, etc. It is ok to charge batteries with different mAh capacities) Features: Charge four batteries at once Charge from 2S to 6S Lithium batteries Balances each individual cell of each battery Daisy chain multiple boards for additional charging Convenient T-Style battery connector 4mm gold bullet input connectors 40A max current Replaceable DC input fuse Replaceable battery port fuses Self-resetting polyfuses protect balance circuits Impact resistant custom molded plastic hard case Specifications: Voltage: 0-22.2V DC Max Current: 40A Batteries: 4 packs (must be same capacity & cell count) Battery Connector: T-Style/JST-XH Input Connector: 4mm Gold Bullet/JST-XH Input Connector Length: 6.75in (17.1cm) Dimensions (LxWxH*): 6.8x3.9x0.75in (17.2x9.9x1.9cm) *Height is 1.25 inches from the top of fuses Note: When using the Parallel Charge Board you will lose the ability to monitor each pack independently. The information the charger displays will be an average of all the cells attached. This product was added to our catalog on December 16, 2021
$23.99
ProTek RC PTK-7821-BK, ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Black) (24T-Hitec)
PTK-7821-BK, ProTek RC Aluminum Team Associated 1/10 Clamping Servo Horn (Black) (24T-Hitec)This product was added to our catalog on December 16, 2021
$14.49
ProTek RC PTK-8020, ProTek RC Aluminum 1/10 Pinion Gear Caddy
PTK-8020, ProTek RC Aluminum 1/10 Pinion Gear CaddyThis product was added to our catalog on December 16, 2021
$13.99
ProTek RC PTK-5044, ProTek RC 4mm Low Profile "Super Bullet" Solid Gold Connectors (2 Male)
PTK-5044, ProTek RC 4mm Low Profile "Super Bullet" Solid Gold Connectors (2 Male)This product was added to our catalog on December 16, 2021
$4.29
ProTek RC PTK-8290, ProTek RC 6" Digital Caliper w/LCD Display & Hard Case
PTK-8290, ProTek RC 6" Digital Caliper w/LCD Display & Hard Case ProTek RC 6" Digital Calipers feature a high-contrast LCD display, stainless steel construction and guaranteed accuracy to 0.001"/0.02mm, making them a must have for any enthusiasts tool box! The tool delivers accurate readings of inside, outside, step and depth measurements that are useful in a variety of applications. Additionally, a plastic storage case is included to keep the tool safe during storage, and two LR44 batteries are included so that you don't need to find another battery when the first one dies! Features: Corrosion resistant stainless steel Convenient auto-off feature Dual mode LCD display - Inches and Metric Inside, outside, depth & step measurements Accuracy: +/- 0.001" +/- 0.02mm Power Source: 1 LR44/SR44 battery (two included) NOTE: For replacement batteries see part PTK-5199. This product was added to our catalog on December 16, 2021
$30.00
ProTek RC PTK-2553, ProTek RC N3 Hot Standard Glow Plug (.12, .15 and .18 Engines)
PTK-2553, ProTek RC N3 Hot Standard Glow Plug (.12, .15 and .18 Engines) The ProTek R/C N3 Hot Standard Glow Plug is a great plug option for .12-.15 to .18 size engines used in monster trucks such as the original and newer 2.5 and 3.3 Traxxas T-Maxx trucks. This plug is recommended for hotter/humid conditions and will provide a more stable idle and crisp acceleration when compared to a cold plug. This plug is recommended for low nitro content fuels (10-20%). NOTE: For Traxxas applications, use one washer. For O.S. engines use two washers. This product was added to our catalog on December 16, 2021
$8.99
ProTek RC PTK-5627, ProTek RC Male T-Style Ultra Plugs (2)
PTK-5627, ProTek RC Male T-Style Ultra Plugs (2) This product was added to our catalog on December 16, 2021
$3.99
ProTek RC PTK-8032, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (14T)
PTK-8032, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (14T)This product was added to our catalog on December 16, 2021
$4.49
ProTek RC PTK-8035, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (17T)
PTK-8035, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (17T)This product was added to our catalog on December 16, 2021
$4.49
ProTek RC PTK-8048, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (30T)
PTK-8048, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (30T)This product was added to our catalog on December 16, 2021
$4.99
ProTek RC PTK-8044, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (26T)
PTK-8044, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (26T)This product was added to our catalog on December 16, 2021
$4.99
ProTek RC PTK-8046, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (28T)
PTK-8046, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (28T)This product was added to our catalog on December 16, 2021
$4.99
ProTek RC PTK-8053, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (35T)
PTK-8053, ProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (35T)This product was added to our catalog on December 16, 2021
$4.99
ProTek RC PTK-8070, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (17T)
PTK-8070, ProTek RC Steel Mod 1 Pinion Gear (5mm Bore) (17T)This product was added to our catalog on December 16, 2021
$5.99
ProTek RC PTK-8417, ProTek RC "TruTorque SL" Metric Ball End Hex Driver Set (4)
PTK-8417, ProTek RC "TruTorque SL" Metric Ball End Hex Driver Set (4) Features: CNC machined knurled aluminum handle with relief holes Rotating aluminum end cap Durable, precision cut, 80mm long HSS Steel tip Tip size is etched in three places on the handle for easy identification Includes: (1) 1.5mm Ball End Hex Driver (1) 2.0mm Ball End Hex Driver (1) 2.5mm Ball End Hex Driver (1) 3.0mm Ball End Hex Driver This product was added to our catalog on December 16, 2021
$57.99
ProTek RC PTK-8616, ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear (3.17mm Bore) (29T)
PTK-8616, ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear (3.17mm Bore) (29T) This product was added to our catalog on December 16, 2021
$5.50
ProTek RC PTK-7823, ProTek RC Aluminum Flat Clamping Servo Horn (Blue) (25T-ProTek)
PTK-7823, ProTek RC Aluminum Flat Clamping Servo Horn (Blue) (25T-ProTek)This product was added to our catalog on December 16, 2021
$11.99
ProTek RC PTK-5364, ProTek RC 2S Charge/Balance Adapter (4mm Bullet Connectors to Female XT90) (12awg) (7pin XH balance plug)
PTK-5364, ProTek RC 2S Charge/Balance Adapter (4mm Bullet Connectors to Female XT90) (12awg) (7pin XH balance plug) ProTek RC 2S Charge Balance Adapter. This adapter is designed to work with the Junsi iCharger 458DUO and 456DUO for charging 2S 4mm bullet batteries. Package includes one charge lead. This product was added to our catalog on February 27, 2024
$9.99
ProTek RC PTK-5367, ProTek RC 2S Charge/Balance Adapter (4mm Bullet Connectors to Female XT90) (12awg) (9pin XH balance plug)
PTK-5367, ProTek RC 2S Charge/Balance Adapter (4mm Bullet Connectors to Female XT90) (12awg) (9pin XH balance plug) ProTek RC 2S Charge Balance Adapter. This adapter is designed to work with the Junsi iCharger 458DUO for charging 2S 4mm bullet batteries. Package includes one charge lead. Note: This Charge lead has a 9pin XH balance plug and is not compatible with the Junsi 456DUO This product was added to our catalog on February 27, 2024
$9.99
ProTek RC PTK-1KTBL, ProTek RC 1KTBL Black Label Ultra High Torque Brushless Waterproof Crawler Servo (High Voltage/Metal Case) (Digital)
PTK-1KTBL, ProTek RC 1KTBL Black Label Ultra High Torque Brushless Waterproof Crawler Servo (High Voltage/Metal Case) (Digital) The ProTek 1KTBL was developed to satisfy the needs of torque thirsty enthusiasts. With the ability to deliver over 1000 oz-in of torque and .11 transit speeds at 8.4V, there aren't many servo options that can compete. Competition rigs, heavy scalers and bashers can take advantage of what the 1KTBL delivers. Even large scale surface models and airplanes can benefit from the insane torque the 1KTBL can produce. All this power means nothing without durability - and the Protek 1KTBL punches far outside its weight class. This servo offers the power, reliability and durability needed to keep the competition on the ropes. The proven gasket system allows waterproof protection up to 1-meter, so it will go the distance in any condition. A full steel gear train, 25T output shaft and full aluminum machined heat sink case finish off the package to create a tough servo that is perfect for demanding applications. The 1KTBL delivers power in excess - with the durability and reliability that make ProTek R/C servos a an easy choice for enthusiasts that expect the most from their rigs. NOTE: For best results, and peak performance, we recommend you power this servo with a BEC. If you experience glitching or poor performance while using a Futaba transmitter, you must turn off BLS mode. BLS mode is only compatible with Futaba BLS type servos. Requires a servo extension lead for a drop-in TRX-4 fit. Features: Ideal for a variety of applications Waterproof up to 1 meter 880 oz-in of torque @ 6.0V, and .16 transit speed 1080 oz-in of torque @ 8.4V, and .11 transit speed Brushless motor High voltage circuitry Full steel gears Full aluminum black anodized heat sink case Dual ball bearings 260mm servo lead Servo Model 1KTBL Recommended Application Crawlers, Bashers & Large Scale Operating Voltage 4.8V - 8.4V Operating Temperature 14° to 140° F (-10 to +60° C) Operating Speed @ 6.0V 0.16/60° sec Operating Speed @ 8.4V 0.11/60° sec Dynamic Torque @ 6.0V 880 oz-in (63.6 kg-cm) Dynamic Torque @ 8.4V 1080 oz-in (77.7 kg-cm) Stall Current @ 6.0V 7.7A Stall Current @ 8.4V 8.3A Motor Type Brushless Digital Output Shaft 25 Tooth Gears Steel Weight 81g Pulse/Frequency 1520s / 333hz Dimensions 41x21x39.5mm Length (Bottom to Mount) 30mm This product was added to our catalog on June 17, 2023
$189.99
ProTek RC PTK-5217, ProTek RC Heavy Duty (14awg) Charge Lead (Alligator Clips to 4mm Banana Plugs)
PTK-5217, ProTek RC Heavy Duty (14awg) Charge Lead (Alligator Clips to 4mm Banana Plugs)This product was added to our catalog on December 16, 2021
$7.19
ProTek RC PTK-5607, ProTek RC 18awg Black Silicone Hookup Wire (1 Meter)
PTK-5607, ProTek RC 18awg Black Silicone Hookup Wire (1 Meter)This product was added to our catalog on December 16, 2021
$3.49
ProTek RC PTK-5229, ProTek RC Heavy Duty EC3 Style Male Pigtail (14awg)
PTK-5229, ProTek RC Heavy Duty EC3 Style Male Pigtail (14awg)This product was added to our catalog on December 16, 2021
$3.99
You have seen 192 out of 1073 products