The Onisiki Dual Sensor Port 540 Brushless Sensored Motor is a great option for 1/10 RC drift applications. Based on the original Onisiki motor design, this motor features a completely redesigned stator and rotor design. The dual sensor ports allow for easier sensor wire positioning within the chassis. Package includes one brushless motor and one sensor wire.
Features:
CNC machined motor can
High purity copper windings for maximum conductivity
High power solder tabs
Powerful sintered neodymium magnets
Adjustable timing
Specifications:Turn: 10.5TkV Rating: 3800
ONI4605, Onisiki 120 Amp Brushless Drift Electronic Speed Controller (Limited Edition)
Onisiki 120 Amp Brushless Drift Electronic Speed Controller. This ESC is a great option for RC drift applications due to its smooth throttle response and adjustable timing. The ESC is capable of 120A to keep performance consistent through the run. Onisiki gave this ESC their signature markings to best match the other available accessories. Package includes one ESC, five ESC wires, one fan, one fan shroud, one capacitor bank, one receiver wire and hardware.
NOTE: This ESC requires soldering. Please note the connections as A + B - C.
Features:
Designed for 1/10 or 1/12 Touring and Drifting
Full aluminum housing
Racing and reverse mode
Compatible with sensored and sensorless motors
Low-Voltage Cut-Off, Thermal and Signal Loss protections
Programmable via the Hobbywing Multifunction LCD Program Box (HWA30502001)
Specifications:
Voltage: 7.4-11.1V (2-3S LiPo)
Continuous Current: 120A
Peak Current: 720A
Motor Limit with 2S LiPo/5-6 NiMH: 3.5T
Motor Limit with 3S LiPo/8-9 NiMH: 8.5T
Fan Size: 25x25x10mm
Fan Voltage Range: 5-8V
Size: 40x30x21mm(w/o Fan)
Wire: 12AWG
This product was added to our catalog on May 11, 2022
ONI2804, Onisiki Daruma Aluminum Case High Performance Drift Gyro (Three-Axis)
Onisiki Daruma Aluminum Case High Performance Drift Gyro. This gyro is a great option for those needing a high performance gyro for anything from buggies to drift cars. The gyro gain is adjustable from both the gyro and from your transmitter if you have more than 2 channels on both your receiver and transmitter. The 3-Axos support makes this gyro even more precise allowing your RC model to be more predictable.
Features:
For Touring, Drift or F1 chassis
Full aluminum case
Gyro gain can be adjusted from a 3rd channel
Specifications:
Weight: 12g
Size: 25*26*10mm
Voltage: 5-8.4V
Current consumption: 20mA/6V
Working temperature: -10°C to +50°C
Support input signal: PWM (50-333Hz) / FUTABA S.BUS /SANWA SSR /SANWA SHR
Output servo signal: 1520uS (333Hz) /760uS (FUTABA SR) /SANWA SSR
Control System: PID Control System
This product was added to our catalog on May 11, 2022
