JCO3190-101021, JConcepts Twin Pins 2.2" Pre-Mounted Rear Buggy Carpet Tires (White) (2) (Pink) w/12mm Hex The JConcepts Twin Pins Carpet 2.2" Pre-Mounted Rear Buggy Tires deliver a ground-breaking design that has the competition scratching their heads. The Twin Pins feature a dual spike which is connected together to form a mini-mountain like silhouette. The Twins are rotated throughout the design to form a solid, pin rich environment so surface area is maximized. The tire carcass itself has been refined, slammed to low-profile, pre-mounted on JCO3348W or JCO3348Y wheels refined for high-speed standards and slimmed out to reduce weight in all possible areas. The center section of the tire is connected at the base by an ultra-low, winding “river walk” which strengthens pins near the base. The “river walk” can also extend the longevity of the tire once the pins are gone, the “walk” retains some height for emergency long distance main events. The outside of a tire can make or break side-bite, too much pin and the tire can be somewhat tippy, while not enough yields a squirrely vehicle. The very outside of the Twin Pins have legs which extend out to micro pins giving the racer all-important support turning high-speed corners. Features: Pre-Mounted JConcepts fit, finish and design Dual, connected pin with alternating positioning “River walk” of center pin support Sidewall legs with micro pins Carefully shaped profiled carcass for rolling speed Includes open cell inserts This product was added to our catalog on March 14, 2021

Read more less

The DS Racing Drift Element 6 Spoke Drift Wheels are a great option to add that custom look to your RC drift car. These wheels feature an adjustable offset allowing you to have a factory, tucked or even stanced look. Each wheel is broken down into five pieces: Inner wheel, Outer wheel, Wheel Face, Inner rivet ring and Outer rivet ring. DS Racing has made these components available in multiple color and style options allowing you to select the wheels that will best match your build.Assembly NOTE: The inner and outer rivet rings need to be glued together prior to final assembly. To change the offset, split the wheel and use the notches on the wheel face to select the desired offset in the outer wheel. Line up the inner wheel and install the included hardware. Features: Custom 6 spoke look Adjustable offset allows you to alter the fit and finish to your liking Multiple color options and styles are available to best match your build Specifications: Scale: 1/10 Drift Diameter: 2.04" (52mm) Width: 1.02" (26mm) Offset: 4-6-8-10-12mm (Changeable) Includes: (2) DS Racing Drift Element Wheels (12) 1.5x8mm Socket Head Screws This product was added to our catalog on May 13, 2022

Read more less

JCO3181-101011, JConcepts Pin Swag 2.2" Pre-Mounted 2WD Front Buggy Carpet Tires (White) (2) (Pink) w/12mm Hex These are the JConcepts Pin Swag 2.2" Pre-Mounted 2WD Front Buggy Carpet Tires. The JConcepts Pin Swag 2.2" 2wd slim front tires are designed to combine the outer lugs of the JConcepts Swagger front tire with a dense arrangement of pins. The Swag is split down the center to give a little individual control to contort to surfaces. In between, a stagger section with an angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimize wear across the carcass. Features: JConcepts original design, details, and materials Pre-mounted for convenience Low profile carcass layout Pin and Swag combo pin/lug arrangement Hefty base pin with crisp ends Dense layout to help minimize wear. Ultra-light weight scalloped tire beads. Available in bright white or fluorescent yellow colors This product was added to our catalog on June 20, 2022

Read more less

JCO3190-201021, JConcepts Twin Pins 2.2" Pre-Mounted Rear Buggy Carpet Tires (Yellow) (2) (Pink) w/12mm Hex The JConcepts Twin Pins Carpet 2.2" Pre-Mounted Rear Buggy Tires deliver a ground-breaking design that has the competition scratching their heads. The Twin Pins feature a dual spike which is connected together to form a mini-mountain like silhouette. The Twins are rotated throughout the design to form a solid, pin rich environment so surface area is maximized. The tire carcass itself has been refined, slammed to low-profile, pre-mounted on JCO3348W or JCO3348Y wheels refined for high-speed standards and slimmed out to reduce weight in all possible areas. The center section of the tire is connected at the base by an ultra-low, winding “river walk” which strengthens pins near the base. The “river walk” can also extend the longevity of the tire once the pins are gone, the “walk” retains some height for emergency long distance main events. The outside of a tire can make or break side-bite, too much pin and the tire can be somewhat tippy, while not enough yields a squirrely vehicle. The very outside of the Twin Pins have legs which extend out to micro pins giving the racer all-important support turning high-speed corners. Features: Pre-Mounted JConcepts fit, finish and design Dual, connected pin with alternating positioning “River walk” of center pin support Sidewall legs with micro pins Carefully shaped profiled carcass for rolling speed Includes open cell inserts This product was added to our catalog on March 14, 2021

Read more less

JCO31533035, Yellow Compound, pre-mounted: Hawk

Read more less

JCO2975, Mini-T 2.0 B Fin Titanium Turnbuckle St Black 6pc

Read more less

JCO3420W, JConcepts 9-Shot Short Course Wheels w/3mm Offset (2) (White) w/12mm Hex JConcepts 9-Shot Short Course Wheels offer unique styling for 1/10th SCT off-road and dirt oval racers. The 9 shot is 1:1 inspired to provide the ultimate performance to off-road racing vehicles around the world. The 9 spoke design, 2.2” x 3.0” mounting diameter, 12mm hex base design fits a huge assortment of vehicles competing in the market such as the Team Associated SC6 genre. The 9 shot features a deep 3D depth spoke with mock 5 lug bolt pattern to bring SCT trucks, SCT Late Model, A-Mod, and B-Mod vehicles to another level of scale inspiration on the racing scene. The JConcepts replacement wheels are available 2 pieces per package and available in white, black, and yellow color styles. The 9 shot wheels are the maximum size allowed under ROAR rules and make a statement with their large, open spoke appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability. Features: 1:1 inspired 9 shot styling and detail 2 wheels included per package Available in bright white, black, and fluorescent yellow colors Vent holes Advanced manufacturing process and durable material Fits a huge assortment of SCT off-road vehicles This product was added to our catalog on October 6, 2023

Read more less

JCO0362, JConcepts 1991 Ford Mustang Fox Body Street Eliminator Drag Racing Body (Clear) NOTE: This body will most likely require a custom fit, or modification, to fit most short course trucks. JConcepts has adapted the iconic 1991 Ford Mustang into a street eliminator machine. The Mustang is intended for street racing and drops to popular SCT conversions and drag racing builds currently in the market. JConcepts looked to build on the street eliminator class by adding the “Fox Body” to the line-up. With past success used as a guideline, the R&D team spent time breaking down the early model Mustangs and arrived at the roughly 13” wheel base and 10.75” width. The size accommodates the trend of utilizing SCT trucks as drag racing platforms. The end result has a low-slung appearance, tight wheel well openings, hood-scoop, bobbed tail and an extended front fascia. As an addition, JConcepts has included a rear spoiler option which attaches with an under / over technique. Each package also includes a the custom window mask, 1991 generation Ford Mustang specific decal sheet and clear polycarbonate body. The product is always backed by JConcepts customer service, supported and used trackside by the JConcepts world-wide racing team and developed by professionals with style and authenticity.  Note: The lower rear spoiler support is mounted carefully to the back of the trunk using double sided tape or shoe goo (not included). The upper wing section sits down on top of the base and is attached with the same technique described above. The rear spoiler provides the look and finishing touch to the street eliminator project. Specifications | Options The Ford Mustang measures a 13" wheelbase and the inside dimensions of the body are 10.75" wide front and 11.375" rear. The body is built for a 2wd SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart. It's helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the body. The JConcepts display vehicle is fitted with and available separately, Hotties tire (JCO3193 front) and (JCO3194 rear) made specifically for the 12mm hex StarTec wheels (JCO3387B) front and rear. The Hotties are purpose built drag racing tires that look the part and available in multiple compounds to suit demanding needs. The StarTec wheels are injected molded for durability and light-weight performance and available in the stealth black color.  Features: Officially licensed by Ford to JConcepts Body measures 10.75” in width and 13” wheelbase Two-piece rear spoiler for street elimination competition Fits an assortment of SCT length trucks with width modifications Scale inspired body, cab and window design 1:1 headlight and grill treatment Clear heavy-duty polycarbonate with protective film Window masks and detailed Ford Mustang decal sheet NOTE: Complete and painted model shown for illustrative purposes only and is not included. This product was added to our catalog on August 22, 2021

Read more less

JCO0395, JConcepts 1978 Chevy Camaro Street Stock Dirt Oval Body (Clear) This clear 1978 Chevy Camaro Street Stock Dirt Oval Body by JConcepts is a great compliment to an emerging entry level class on the dirt-oval racing scene. This body shell features a fastback roofline with built-in rear spoiler, traditional V-nose and grille with perched headlights. The rear is highlighted by large format taillight and turn signal combination lamps. In addition, the large format side-windows and wrap-around rear window scream late 70’s styling cues. If you’re far enough over the hill, you might recall the days when the coolest guys in town cruised the streets in a shiny new 1978 Camaro. In those days the classic pony car sported a flowing look and set a new record for annual sales for the Chevrolet brand. Today, the Camaro is the talk of the race track with all specific wheelbase and width to fit modern 1/10th off-road chassis converted to dirt-oval bandits. The Street Stock class is fun, exciting and now, with JConcepts, even better in appearance and performance. The 1978 Camaro debuted in May of 2019 at the inaugural JConcepts Spring Dirt Oval Nationals in Omaha, Nebraska to a thrilling reception. As with all JConcepts body shells, the set includes clear body, window mask, instruction sheet and decal sheet. Officially licensed to JConcepts by Chevrolet, the classic is also built, formed and designed in the U.S.A. with professional grade artisans. The body is built for a 2wd off-road buggy wheelbase and width and requires body mounting assistance or while using the B6, the JConcepts recommend shock towers (#2716, #2717) and Team Associated T6.1 body mounts. It's helpful to plan your build, take measurements and modify your platform to fit inside the boundaries of the body.  NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.  Feature: 1978 Chevy Camaro faithful representation Built-in rear spoiler for added rear down-force V-nose with perched headlights Fits an assortment of standard 1/10th buggies (with body mount applications) Decal sheet with Chevrolet, Camaro, Speed Shop and JConcepts badges. Officially licensed by Chevrolet to JConcepts. Specifications: Model: 1978 Chevy Camaro Wheelbase: 11" Inside Dimensions: Front:9.5" Rear: 9.75" Application: 2wd Off-road buggy Includes:  (1) Clear Camaro Body Window Masks Instruction Sheet Decal Sheet This product was added to our catalog on July 16, 2021

Read more less

JCO0384, JConcepts Arrma Kraton 6S BLX Finnisher Body (Clear) The JConcepts Arrma Kraton BLX Finnisher body is a great option to customize your Arrma Kraton kit. This body incorporates many design features to give it an aggressive stance with a highlight on performance. A wide front hood scoop allows plenty of clearance for the unique Kraton shock geometry, while an extended front chin spoiler, headlights and grill protect the front-end from unwanted up-drafts. A built-in air escape passage on the roof allows the customer to fine-tune the body for maximum outdoor performance. The clear polycarbonate body with protective film allows you to pick and apply your own paint design. A sheet of Finnisher decals is included. Body is sold clear and requires trimming. NOTE: Painted body shown in photos is for illustrative purposes only. The body you will receive is clear and unpainted.  Features: Original - JConcepts Finnisher design Drop-on fit for the Arrma Kraton BLX Blended wing / body design  Clear polycarbonate with protective film  Window masks and Finnisher decal sheet 2016 ROAR National Champion design 2017 Dirt Nitro Challenge Champion design 2018 Dirt Nitro Challenge Champion design This product was added to our catalog on June 2, 2022

Read more less

JCO2889, Analog Quick Reference Calipers JConcepts Analog Quick Reference Calipers allow users to reference dimensions quickly. Racers have asked over and over for a small footprint item that is able to measure small spaces accurately and quickly. The quick reference calipers are analog based and capable to be locked into place to secure or save dimensions for later or to copy side-to-side. The all-aluminum built and anodized item, built from 4 pieces, is a very technical and precise piece. The quick reference tool has the ability to measure inside surfaces and outside surfaces depending on which end is chosen for use. A metric graduated scale is laser etched onto the item to allow the user to measure in .5mm increments. A thumbscrew allows the sliding plane to be locked into place for quick comparisons and reference distances. A display window is machined into the upper slide where dimensions are shown up to an overall length of 80mm. A small overall size makes it ideal to place in to RC sized tool and lock boxes used routinely out in the field. Features: JConcepts design and function Highly detailed design, 4-piece construction Graduated scale measuring in .5mm increments to 80mm Lockable sliding plane to save reference dimensions This product was added to our catalog on May 22, 2021

Read more less

JCO24972, Motor/ Rotor box w/ foam liner-Black

Read more less