Flywoo

These props are an exact replacement for the Flywoo 1s Nano quad but are perfect for any 40mm whoop. They provide an enhanced flight feel and a good punch for your little ripper. Check out the rest of our micro props, and all our Gemfan selection! Specifications Diameter: 40mm Pitch: 1" Blades: 2 Material: Polycarbonate Hub Thickness: 5mm Shaft Hole: 1mm Weight: 0.25g Includes 8x Gemfan Bi-Blade 40mm Props For Flywoo 1S Nano - Clear Gray (1mm Shaft)

Read more less

These props are an exact replacement for the Flywoo 1s Nano quad but are perfect for any 40mm whoop. They provide an enhanced flight feel and a good punch for your little ripper. Check out the rest of our micro props, and all our Gemfan selection! Specifications Diameter: 40mm Pitch: 1" Blades: 2 Material: Polycarbonate Hub Thickness: 5mm Shaft Hole: 1.5mm Weight: 0.25g Includes 8x Gemfan Bi-Blade 40mm Props For Flywoo 1S Nano - Clear Blue (1.5mm Shaft)

Read more less

GOKU Versatile F405 PRO FC is a versatile and powerful flight control equipped with the smallest but most powerful f405 BGA Chipsets instead of ordinary QFP (Big Size) MCUs. Perfect for any 20x20 / 30.5 x30.5 build. DJI Plug & Play plug (Older Air Unit and the DJI O3 Air Unit) and so many UARTs that most people wouldn't even use them all. Compatible with digital and analog FPV, onboard Barometer for possible long-range flights, and much more. Check out all our 30x30 and 20x20 FCs and all our Flywoo products! Features Perfect for any 20x20mm, 30.5x30.5mm build. The FC has super big pads, very easy to solder everything Including a barometer, black box, 6 complete hardware serial ports, I2C functionality. Dual BEC 5V 2A / 10V 2A Universal USB Type C connector instead of micro USB Support Betaflight \ INAV \ Autopilot Connections to both the older Air Unit and the O3 Air Unit Specification MCU: STM32F405BGA GYRO: ICM42688 UARTS: 6 Uarts I2C: SCL/SDA Barometer: BMP280 BEC: 5V 2A / 10V 2A Blackbox: 16M Input Voltage: 2-6S Firmware: FLYWOOF405PRO Mounting: 20x20mm M3 / 30.5x30.5mm  ESC Soft: Dshot300/600 ESC Telemetry: Yes LED Controller: BF LED USB: TYPE USB F.Port: Yes RSSI: Yes Buzz: Yes Input: 2~6S Lipo (8.4~25.2V) TVS Protection: Yes Weight: 5.5g Includes 1x Flywoo Versatile F405 PRO 2-6S 20x20 / 30x30 Flight Controller for DJI O3 2x Connecting Wires 8x Grommets

Read more less

Flywoo 1G2-1G3 VRX boasts a wide 9CH range from 1080-1360MHz and two Y-shaped 1.2G antennas for stable signal connectivity. Alongside, the included Notch Filter (868/915 MHz) which filters out other similar frequencies for clear FPV visuals. Compatible with DJI V2 goggles, allowing for a high-quality video feed and an immersive flying experience. Check out our FPV Wing Gear, as well as the rest of our Flywoo selection!  Features Wide Receiving Frequency Range: The FLYWOO1.2/1.3GHz Dual VRX Video Receiver has a receiving frequency range of 9CH, covering a wide range from 1080MHz to 1360MHz. Dual Antenna Design: With two Y-shaped 1.2G antennas, the Flywoo receiver module ensures stable and reliable signal reception for an uninterrupted FPV experience. Notch Filter Included: The FLYWOO 1.2GHz VRX Notch Filter (868/915 MHz) included in the box helps eliminate interference from other devices operating at similar frequencies, ensuring a clear video feed. Compatible with DJI V2 goggles: The FLYWOO 1.2/1.3GHz Dual VRX Video Receiver is compatible with DJI V2 goggles, allowing for a high-quality video feed and an immersive flying experience. Specifications Receiving Frequency: 9CH (1080MHz to 1360MHz) RX Sensitivity: -95dBm Dual Input: 7-26V/2-6S Button Control: Lock and Select Frequency Channel LED: 9CH LED RSSI LEDs: RSSI0/RSSI1 Regulator Output: 5V 2A Current Consumption: 0.4A @5V/0.2A @12V Video Format: NTSC or PAL Video Output Impedance: 75Ω, Typ. Audio Subcarrier Frequency: 6.5MHz & 6.0MHz ANT. Input Impedance: 50Ω, Typ. RF Connector: SMA Product User Guide Press and hold the LOCK button for 3 seconds to unlock the channel. The UNLOCK LED will light up and the buzzer will sound once. Press the CHANNEL button to select the frequency. The LED will light up and the buzzer will sound once. The RSSI0/RSSI1 LEDs respectively display the signal strength of the two receiver modules. The new frequency will be saved if no button action is taken within 3 seconds. Includes 1x Flywoo VRX 1G2-1G3 Dual 9CH 1.2/1.3GHz Analog Goggle Receiver Module (Compatible with DJI Goggles V2) 2x Flywoo 1.2GHz VRX Notch Filter (868/915 MHz) 2x Flywoo 1.2GHz Antennas 1x Power Cable 1x Video Cable

Read more less

Flywoo 1G2-1G3 VRX boasts a wide 9CH range from 1080-1360MHz and two Y-shaped 1.2G antennas for stable signal connectivity. Alongside, the included Notch Filter (868/915 MHz) which filters out other similar frequencies for clear FPV visuals. Check out our FPV Wing Gear, as well as the rest of our Flywoo selection!  Features Wide Receiving Frequency Range: The FLYWOO1.2/1.3GHz Dual VRX Video Receiver has a receiving frequency range of 9CH, covering a wide range from 1080MHz to 1360MHz. Dual Antenna Design: With two Y-shaped 1.2G antennas, the Flywoo receiver module ensures stable and reliable signal reception for an uninterrupted FPV experience. Notch Filter Included: The FLYWOO 1.2GHz VRX Notch Filter (868/915 MHz) included in the box helps eliminate interference from other devices operating at similar frequencies, ensuring a clear video feed. Specifications Receiving Frequency: 9CH (1080MHz to 1360MHz) RX Sensitivity: -95dBm Dual Input: 5V/2.54 9 PIN socket, compatible with FATSHARK/SKYZONE FPV Goggles Button Control: Lock and Select Frequency Channel LED: 9CH LED RSSI LEDs: RSSI0/RSSI1 Current Consumption: 0.4A @5V Video Format: NTSC or PAL Video Output Impedance: 75Ω, Typ. Audio Subcarrier Frequency: 6.5MHz & 6.0MHz ANT. Input Impedance: 50Ω, Typ. RF Connector: SMA Product User Guide Press and hold the LOCK button for 3 seconds to unlock the channel. The UNLOCK LED will light up, and the buzzer will sound once. Press the CHANNEL button to select the frequency. The LED will light up, and the buzzer will sound once. The RSSI0/RSSI1 LEDs, respectively display the signal strength of the two receiver modules. The new frequency will be saved if no button action is taken within 3 seconds. Includes 1x Flywoo VRX 1G2-1G3 Dual 9CH 1.2/1.3GHz Analog Goggle Receiver Module 2x Flywoo 1.2GHz VRX Notch Filter (868/915 MHz) 2x Flywoo 1.2GHz Antennas

Read more less

Replacement motor for the Firefly DC16 or a new motor to style out your next micro build with this purple and gold micro motor from Flywoo. Rated with a stator 1002 and Kv of 23,500, giving you great power for your whoop builds.  Check out our Micro Motors and Flywoo gear selection! Specifications  KV: 23500 Stator: 1002 Motor Bolt Pattern: 6mm Tri-Mount Configuration: 9N12P Stator Diamter: 10mm Stator Length: 2mm Shaft Diameter: 1.5mm Motor Dimension(Dia.xLen): Φ13.5x7.75mm Weight(g): 2.5(5cm wire) Idle current(5)@5V(A): 1.5 No.of Cells(Lipo): 1S Max Continuous Power(W)3S: 52 Internal Resistance: 75mΩ Max Current(3S): 14A Max Efficiency Current: (2-4A)>84% Includes 1x Flywoo Robo 1002 23500Kv Micro Motor

Read more less

The Flywoo Robo 1003 motor provides an efficient power output and smooth operation in a lightweight package. It's constructed of top-grade 7075 aviation aluminum and boasts a dual bearing design, high-efficiency magnetic circuit design, dual color oxidation, and wire soldering pad for reliable control. It's an ideal choice for whoop and toothpick models. Check out our Micro Motors and Flywoo gear selection! Specifications Brand: FLYWOO Model: RB1003 Brushless motor Configuration: 9N12P Magnet: N52H Stator Diameter: 10MM Stator Height: 3MM Output Shaft Diameter: 1.50MM Dimensions: 13.5mm x 9.2mm Rated Voltage: 1-2S Mounting Hole: 3xM1.4-D6.6 Weight: 3.3g (4cm wire) Includes 1x Flywoo Robo 1003 14,800Kv Micro Motor - Gold/Purple

Read more less

Replacement motor for the Firefly DC16 or a new motor to style out your next micro build with this purple and gold micro motor from Flywoo. Rated with a stator 1002 and Kv of 19,800, giving you great power for your whoop builds.  Check out our Micro Motors and Flywoo gear selection! Specifications  KV: 19800 Stator: 1002 Motor Bolt Pattern: 6mm Tri-Mount Configuration: 9N12P Stator Diameter: 10mm Stator Length: 2mm Shaft Diameter: 1.5mm Motor Dimension(Dia.xLen): Φ13.5x7.75mm Weight(g): 2.5(5cm wire) Idle current(5)@5V(A): 1.3 No.of Cells(Lipo): 1S Max Continuous Power(W)3S: 44 Internal Resistance: 89mΩ Max Current(3S): 11.8A Max Efficiency Current: (2-4A)>84% Includes 1x Flywoo Robo 1002 19800Kv Micro Motor 

Read more less

The A30 high current connectors are an ideal fit for high-performance drones, providing a reliable connection with minimal resistance. This 5-pack of A30 Pigtails has each measuring 80mm. Get improved performance and reliability with the ability of up to 15A of continuous current - far higher than the 4.5A of PH2.0 connectors. Discharging more current in the same capacity than PH2.0 crimped pins, A30 connectors provide significantly more power - leading to extended flight time at full throttle on 1S whoop drones. Upgrade to A30 connectors for better performance and reliability. Check out all our pigtails and connectors as well as our products from Flywoo! Flywoo factory images say 20awg, but 1st batch shipped are actually 22awg. Specifications Wire Length: 80mm Wire Gauge: 22AWG Weight: 1.2g (ea.) Connector: A30 Female Includes 1x  Flywoo Pigtail A30-F 22AWG 80mm - 5 Pack

Read more less

This adapter pigtail allows for quick and easy charging of batteries with A30 connectors using chargers equipped with PH2.0 connectors. It provides a convenient solution to all your charging needs. Check out all our pigtails and connectors as well as our products from Flywoo! Specifications Wire Length: 60mm Wire Gauge: 22AWG Weight: 1.3g (ea.) Connector: A30 Female & PH2.0 Includes 1x Flywoo Pigtail A30-F to PH2.0 Male Charge/Discharge Adapter 22AWG 60mm - 5 Pack

Read more less

Co- Brand Dave_C & Flywoo Nin 1404 V2 Motors were made to the highest standards for ultralight builds. Available in multiple Kv options. Check out all our Micro Motors and our Flywoo gear selection! Features Precision CNC 7075 Aluminum Alloy High Strength Iron Shaft Special Electroplating Process 24AWG Silicone Cable NSK Bearings N52H Arc Magnets Heat Resistant Pacific Copper Windings Specifications Kv: 2750Kv Input Voltage: 4-6S Stator diameter: 14mm Stator height: 4mm Bearings: NSK Wire Length: 24AWG 150 mm Shaft size: M1.5 Mounting Screw Pattern: 12×12 mm Weignt: 8.7g Includes 1x Flywoo NIN 1404 2750Kv Micro Motor

Read more less

Flywoo designed the O3 Ultra CNC modification kit, reducing weight by 50% respectively. This enables micro-drones to unlock their video creation potential and improves visual and control experience. Pilots can enjoy high-definition real-time transmission and smooth control in tight spaces. The modification ensures stability and reliability, providing greater maneuverability and extended flight time. Flywoo aims to meet the demands of drone enthusiasts, delivering excellent visual and control experience. Included with this kit is the naked O3 camera, naked O3 Ultra VTX, antenna, clear UV lens, and hardware.  Overall, the Flywoo Naked O3 Lite/Ultra Air Unit is an excellent product for those who looking to shave off some weight from their DJI O3 Air Unit. There are 3D printed alternatives, but the ease of use, precision and robustness of CNC parts are probably better bets. The design is well thought-out, and the conversion process is straightforward. Check out our Flywoo selection and check out our other DJI O3 Products! Features Equipped with high-definition real-time transmission and video recording functions, with the advantage of low latency transmission. Lightweight, solves the weight problem of micro drones, reducing up to 37%~50% of the weight. Lightweight 7075 aluminum alloy fixed frame, sturdy and reliable. Improves the control experience of micro drones and increases flight time. Can also create 4K high-definition videos in indoor or small spaces. Specifications Product Dimensions:  21.2x20x17.9mm(CAM)/29.8x28.8x13.3mm (VTX) Transmission Resolution:  1080/4K 120FPS Product Model:  FLYWOO O3 Ultra Product Weight: 18.3g (O3 Ultra) Input Voltage: 7V-26V Recommended (Not Included) Flywoo Naked O3 ND Filter Set - ND4/ND8/ND16 Includes 1x Flywoo Naked O3 Ultra Air Unit (w/ camera module & antennas)

Read more less

Naked GoPro mount for the Flywoo Explorer LR V2 4" Frame and the Flywoo Hexplorer. Check out all our Flywoo products! Includes 1x Flywoo Naked GoPro 5/6/7 Mount for Explorer LR V2 and Hexplorer Frames

Read more less

Flywoo designed the O3 Ultra CNC modification kit, reducing weight by 50% respectively. This enables micro-drones to unlock their video creation potential and improves visual and control experience. Pilots can enjoy high-definition real-time transmission and smooth control in tight spaces. The modification ensures stability and reliability, providing greater maneuverability and extended flight time. Flywoo aims to meet the demands of drone enthusiasts, delivering excellent visual and control experience. Included with this kit is the naked O3 camera, naked O3 Lite VTX, antenna, clear UV lens, and hardware.  Overall, the Flywoo Naked O3 Lite/Ultra Air Unit is an excellent product for those who looking to shave off some weight from their DJI O3 Air Unit. There are 3D printed alternatives, but the ease of use, precision and robustness of CNC parts are probably better bets. The design is well thought-out, and the conversion process is straightforward. Check out our Flywoo selection and check out our other DJI O3 Products! Features Equipped with high-definition real-time transmission and video recording functions, with the advantage of low latency transmission. Lightweight, solves the weight problem of micro drones, reducing up to 37%~50% of weight. Lightweight 7075 aluminum alloy fixed frame, sturdy and reliable. Improves the control experience of micro drones and i