ARA310949, Arrma BLX 4x4 HD Mod 0.8 Slipper Set (57T)
This is an optional Arrma 57T HD Mod 0.8 Slipper Set, pre-built and ready to install in your BLX 4x4 BigRock, Granite, Senton and Typhon vehicles.
Features:
Precision manufactured aluminum slipper hubs
Durable composite 57T 0.8 module spur gear for reliable power handling capability
Castellated slipper pads for assured location into spur gear
Stainless steel slipper plate
Supplied assembled and set, ready to install into your vehicle
This product was added to our catalog on October 12, 2021
ARA310951, 39T MOD1 Spool Gear (8mm Bore)
This 39T Mod1 Spool Gear allows you to fine tune the gearing of your vehicleFeaturesStrong and durable steel for long-lasting performance in extreme RC conditions - Precision manufactured tooth profile for smooth operation - Precision manufactured set screw holes for the fit of screws either side of the spool shaft for extra secure fit - To fit to 8mm diameter shaftIncludes1 x 39T MOD1 SPOOL GEAR (8mm BORE)1 x M4 x 4mm Set Screw1 x M4 Screw Pin
This item was added to our catalog June 3, 2022
ARA310956, Arrma Mega/3S BLX Pre-Assembled Differential Set (37T)
The Arrma Mega/3S BLX Pre-Assembled Differential Set is a replacement differential intended for select Arrma 3S BLX/4x4 550 models. This differential come prefilled with 10,000cSt oil and is ready to bash. Package includes one assembled differential.
This product was added to our catalog on March 3, 2021
ARA310957, Arrma Mojave 6S BLX Front/Rear Differential Set
This is a single replacement Arrma Front/Rear Diff Set, intended for use with the Mojave, Kraton, Notorious, Outcast and Talion BLX kits. This Front or Rear Spiral Cut Diff Set provides a pre-assembled replacement unit for servicing your vehicle.
Features:
Factory assembled and filled with 10k cSt silicone oil for fast and efficient servicing
Tough steel internal gears for long-lasting durability in all conditions
Strong composite diff case
43T spiral cut steel main gear for increased durability under extreme loads
Metal Cross Shafts and inserts for increased efficiency of fit and long-lasting durability
Includes bearings for fast and efficient fit to your vehicle
Includes:
(1) Factory Assembled Front or Rear Diff, 43T Spiral Cut Gear and 10k cSt Silicone Oil
This product was added to our catalog on December 30, 2021
ARA310958, Arrma Limitless/Infraction Front/Rear Differential w/Straight Cut Gear (43T)
This is a replacement Arrma 43T Front/Rear Diff Set with Straight cut gear, intended for use with BLX and Roller models of the Infraction, Limitless and Typhon kits.
This product was added to our catalog on April 3, 2024
ARA310959, Center Diff Set 50T 100k Oil
This is a single replacement Arrma Center Diff Set, intended for use with the Mojave, Kraton, Notorious, Outcast, Typhon and Talion BLX kits. This Center Diff Set provides a pre-assembled replacement unit for servicing your vehicle.Features:Factory assembled and filled with 100k cSt silicone oil for fast and efficient servicingTough steel internal gears for long-lasting durability in all conditionsStrong composite diff case50T steel spur gear for increased durability under extreme loadsMetal Cross Shafts and inserts for increased efficiency of fit and long-lasting durabilityIncludes bearings for fast and efficient fit to your vehicleIncludes:(1) Factory Assembled Center Diff, 50T Steel Spur and 100k cSt Silicone Oil
This item was added to our catalog March 2, 2022
ARA310973, Arrma Outcast 8S CVD 136mm Driveshaft
This is a replacement Arrma Outcast 8S CVD 136mm Driveshaft, intended for use with the 8S BLX Outcast. This high-quality 136mm CVD Driveshaft is the perfect replacement part for your ARRMA vehicle.
Features:
Tough steel for long-lasting durability and low wear
Precision manufactured dogbone pin for smooth operation in all conditions
Precision engineered CVD coupling for ultra-smooth power transfer and low-maintenance
This product was added to our catalog on May 15, 2021
ARA310978, Spur Gear 50T Plate Diff for 29mm Diff Case
This is a replacement Arrma 50T Spur Gear, a strong and durable replacement for your Kraton, Mojave, Notorious, Outcast and Talion 6S kits.
Features:
Strong steel for long-lasting durability in extreme RC conditions
Precision manufactured tooth profile for consistent mesh with pinion gear and smooth operation
50T, 1 module gear tooth configuration
For use with 29mm diff case differential
Includes:
(1) 50T Steel Spur Gear
This product was added to our catalog on March 2, 2022
ARA310979, Arrma Kraton EXB GP4 Spiral Cut Main Input Gear (10T)
Arrma Kraton EXB Spiral Cut GP4 Main Input Gear. This is a replacement for the Kraton 6S EXB model, but can be used with the standard 6S BLX Kraton, Mojave, Notorious, Outcast, and Talion kits as an optional upgrade when combined with the GP4 main diff gear (ARA310980) and additional 29mm diff case parts.
Arrma Big Rock 6S BLX
Arrma Fireteam 6S BLX
Arrma Kraton 6S BLX
Arrma Mojave 6S BLX
Arrma Notorious 6S BLX
Arrma Outcast 6S BLX
Arrma Talion 6S BLX
Features:
Constructed from tough steel material for long-lasting durability and consistent performance
Wide tooth profile increases torque handling capabilities
Precision manufactured gear teeth for smooth operation in extreme RC conditions
GP4 configuration to be used with GP4 Main Diff Gear
NOTE: Must be paired with ARA310980 - MAIN DIFF GEAR 43T SPIRAL GP4 5mm (FITS 29mm DIFF CASE).
This product was added to our catalog on September 15, 2023
ARA310980, Arrma Kraton EXB Spiral Cut Main Differential Gear (43T).
This is a replacement Arrma Kraton EXB 43T Spiral Cut Main Diff Gear. This is a replacement for the Kraton 6S EXB model, but can be used with the standard 6S BLX Kraton, Mojave, Notorious, Outcast, and Talion kits as an optional upgrade.
NOTE: Must be used with ARA310979 - MAIN INPUT GEAR 10T SPIRAL CUT GP4 5mm. Requires 29mm diff case differentials (ARA310983 or ARA311061).
Features:
Machined from tough steel for long-lasting durability and consistent performance
Spiral-cut, wide tooth profile increases torque handling capabilities
Precision manufactured gear teeth for smooth operation in extreme RC conditions
GP4 configuration to be used with GP4 Main Input Gear
Fits on 29mm Diff Case
This product was added to our catalog on August 13, 2021
ARA310994, Arrma Mega/3S BLX Slipper Pad (4)
This is a pack of four replacement Arrma Slipper Pads for the 3S BLX and MEGA 4X4 vehicles.
This product was added to our catalog on March 12, 2021
Product Details
This tough steel 18T 0.8 Module Safe-D Pinion Gear is the perfect part to carry in your RC tool box
Features
Strong and durable steel for long-lasting performance in extreme RC conditions - Precision manufactured wide tooth profile for smooth operation - 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out - Suits 5mm motor shaft diameter - Precision manufactured threaded set-screw hole - E-clip supplied for motor shaft pinion retention
Includes
1 x 18T 0.8 Module Safe-D Pinion Gear
1 x Set Screw - M4 x 4mm
1 x E-Clip - 3.2mm
ARA311002, Arrma Safe-D5 Steel Mod 0.8 Pinion Gear (19T)
Arrma Safe-D5 Steel Mod 0.8 Pinion Gears feature a D shaped hole that locks onto the motor shaft and helps to prevent the loss of drive and brakes if the set screw backs out. These gears are machined from steel for durability and fit 5mm motor shafts.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 5mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
0.8 Module Safe-D Pinion Gear
(1) Set Screw - M4 x 4mm
(1) E-Clip - 3.2mm
This product was added to our catalog on January 19, 2021
ARA311007, Arrma Safe-D5 Steel Mod 0.8 Pinion Gear (24T)
Arrma Safe-D5 Steel Mod 0.8 Pinion Gears feature a D shaped hole that locks onto the motor shaft and helps to prevent the loss of drive and brakes if the set screw backs out. These gears are machined from steel for durability and fit 5mm motor shafts.
Fits:
Arrma Big Rock 3S BLX
Arrma Granite 3S BLX
Arrma Senton 3S BLX
Arrma Typhon 3S BLX
Arrma Vendetta 3S BLX
Arrma Vorteks 3S BLX
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 5mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
0.8 Module Safe-D Pinion Gear
(1) Set Screw - M4 x 4mm
(1) E-Clip - 3.2mm
This product was added to our catalog on April 18, 2021
Product Details
This tough steel 27T 0.8 Module Safe-D Pinion Gear is the perfect part to carry in your RC tool box
Features
Strong and durable steel for long-lasting performance in extreme RC conditions - Precision manufactured wide tooth profile for smooth operation - 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out - Suits 5mm motor shaft diameter - Precision manufactured threaded set-screw hole - E-clip supplied for motor shaft pinion retention
Includes
1 x 27T 0.8 Module Safe-D Pinion Gear
1 x Set Screw - M4 x 4mm
1 x E-Clip - 3.2mm
ARA311013, 30T 0.8Mod Safe-D5 Pinion Gear
Product Details
This tough steel 30T 0.8 Module Safe-D Pinion Gear is the perfect part to carry in your RC tool box
Features
Strong and durable steel for long-lasting performance in extreme RC conditions - Precision manufactured wide tooth profile for smooth operation - 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out - Suits 5mm motor shaft diameter - Precision manufactured threaded set-screw hole - E-clip supplied for motor shaft pinion retention
Includes
1 x 30T 0.8 Module Safe-D Pinion Gear
1 x Set Screw - M4 x 4mm
1 x E-Clip - 3.2mm
Product Specifications
Part Type
Gears
ARA311016, Arrma Felony 6S GP5 Main Input Gear (15T)
This is an Arrma 15T Felony 6S GP5 Main Input Gear, intended for use with Felony 6S and Limitless kits. This high quality 15T GP5 Main Input Gear (gear profile 5) is the perfect part to carry in your RC tool box.
Features:
Constructed from hard-wearing steel for long-lasting durability and consistent performance
Straight-cut tooth profile
15 precision manufactured gear teeth for smooth operation in extreme RC conditions
GP5 configuration to be used with matching GP5 Main Diff Gear
This product was added to our catalog on September 25, 2021
ARA311017, Arrma Felony 6S GP5 Main Differential Ring Gear (42T)
The Arrma GP5 42T Main Diff Ring Gear, is a replacement for the Arrma Felony and Infraction V2 models.
Features:
Machined from strong steel for long-lasting durability and consistent performance
Straight-cut tooth profile
42 precision manufactured gear teeth for smooth operation in extreme RC conditions
GP5 (gear profile) configuration to be used with GP5 Main Input Gear
Note:
Combine with ARA311016 - MAIN INPUT GEAR 15T GP5
Fits on ARA310433 - DIFF CASE SET (1pc)
This product was added to our catalog on January 29, 2022
ARA311019, Main Diff Gear 45T GP6
This is an optional Arrma GP6 Main Diff Gear, intended for use with the Felony and Infraction V2 models.
Features:
Machined from strong steel for long-lasting durability and consistent performance
Straight-cut tooth profile
45 precision manufactured gear teeth for smooth operation in extreme RC conditions
GP6 (gear profile) configuration to be used with GP6 Main Input Gear
Fits on ARA310433 - DIFF CASE SET
Needed to Complete:
ARA311018 - MAIN INPUT GEAR 14T GP6
AR310433 - DIFF CASE SET (1)
This product was added to our catalog on March 2, 2022
ARA311031, Arrma BLX 4X4 HD Input Gear (13T)
This is a replacement Arrma 13T BLX 4X4 HD Input Gear, an ideal replacement for your BLX and Mega 4x4 BigRock, Granite, Senton and Typhon kit supplied parts.
Features:
Manufactured from tough, durable materials for a long service life
Precise dimensions for excellent fit and smooth operation
Hybrid construction combines a composite gear molded on to a metal splined shaft
13 tooth bevel gear
1.35 Module tooth profile
Note: To be used with ARA310956 Diff set
This product was added to our catalog on November 24, 2021
ARA311033, Arrma Slipper Clutch Maintenance Set
This replacement Arrma Slipper Clutch Maintenance Set is used in BLX 4x4 models of the BigRock, Granite, Senton and Typhon kits.
Features:
High-quality thrust race for smooth operation
Precisely manufactured spring for consistent slipper pressure
Accurately molded composite nut-locks holds the screw in place for consistent slipper setting
Longer 25mm cap head machine thread screw for fine adjustment
Molded end-cap to keep dirt away from the thrust race
Includes:
(1) Thrust Race
(1) Slipper End Cap
(1) Slipper Lock Nut
(1) Slipper Spring
(1) M2.5 x 25mm Cap Head Screw
This product was added to our catalog on March 18, 2021
ARA311034, HD 57T Slipper Set (0.8Mod)
This is an Arrma Mega/BLX 4x4 HD 57 Tooth 0.8Mod Slipper Set, intended for use with Mega and BLX 4x4 Arrma kits. This set is supplied pre-built and ready to install in your vehicle.
Features:
Precision manufactured aluminum slipper hubs
Durable composite 57T 0.8 module spur gear for reliable power handling capability
Castellated slipper pads for assured location into spur gear
Stainless steel slipper plate
Molded composite lock nut holds the screw in place for consistent slipper setting
Supplied assembled and set, ready to install into your vehicle
This product was added to our catalog on April 10, 2022
