97074-1, TRX-4M Scale and Trail Crawler with Ford Bronco Body: 1/18-Scale 4WD Electric Truck with TQ 2.4GHz Radio System
The Traxxas TRX-4M 1/18 Electric Rock Crawler with Ford Bronco Body is an adventure-driven micro crawler that can be found at your local hobby shop! The highly detailed ABS bodyshell features clipless mounting to the rigid C-channel frame. This frame is supported by four oil-filled GTM shocks to add control and keep the body from bouncing around. Scale straight axles are connected to the frame using full 4-link suspension. Adding to the performance, this truck features up to 45° steering angle to help tackle the trail ahead. Head over to your local hobby shop and inquire about the Traxxas TRX-4M Rock Crawler!
While your local hobby shop will have the truck, here at AMain we have a wide array of option parts available to make your TRX-4M a fully capable crawling machine! Check out awesome screw kits, scale wheels and tires, and much more from some of your favorite brands in RC!
Features:
Highly detailed licensed body shell made of durable ABS
Triangulated 4-link front and rear suspension
Oil-filled GTM shocks
Wheels and tires mounted to 7mm hex
Full-time shaft-driven 4-wheel drive
Low-CG Battery Tray
Superior 45° steering angle
Direct steering (no servo saver)
Powerful Titan® 87-turn brushed motor
ECM-2.5 Electronic Control Module incorporates ESC, receiver, and LED controller
Fully waterproof for all-weather fun
Includes transmitter, battery and charger for out of the box fun
Specifications
Scale: 1/18
Length: 10.3 inches (262mm)
Wheelbase: 6.10 inches (155mm)
Track Width: 4.9 inches (124mm)
Height: 4.6 inches (117mm)
Ground Clearance: 1.12 inches (29mm)
Weight (w/o battery): 1.03lbs (468g)
Approach Angle: 54°
Breakover Angle: 45°
Departure Angle: 48°
Shock Length (front and rear): 2.0 inches (51mm)
Hex Size: 7mm
Wheels: 1.0 x 0.49 inches (25.4 x 12.5mm)
Tires: 2.2 x 1.0 inches (57 x 25.4mm)
Motor: Brushed 180-Size 87T
Differential Type: Fully Locked; 2:1 Axle Ratio
Battery Tray: 50.5x31mm (LxW)
Includes:
(1) Traxxas TRX-4M Micro Rock Crawler with:
(1) Officially Licensed ABS Hard Body
(1) Titan 180 87-turn motor
(1) ECM-2.5 Electronic Control Module
(1) TQ transmitter
(1) 7.4 volt 750mAh 2-cell LiPo battery
(1) 2-amp USB fast charger with iD
Tools for maintenance
Needed to Complete:
(4) AA Alkaline Batteries
This product was added to our catalog on January 19, 2023
98044-1, Traxxas TRX-4MT Ford F-150 1/18 Scale 4X4 Monster Truck
Traxxas delivers solid-axle monster truck performance and durability to 1/18 scale fans with the new TRX-4MT. A factory-installed Long Arm Lift Kit with eight shocks and large Terra Groove tires give TRX-4MT unrivaled capabilities and towering ground clearance. Available with a highly detailed Ford F-150 body, TRX-4MT sets the standard for authentic monster truck performance in a convenient, take-anywhere size.
MODEL 98044-1: TRX-4MT with Ford F-150 pickup body: 1/18 scale 4X4 monster truck, fully-assembled, Ready-To-Drive, with TQ 2.4 GHz 2-channel transmitter, and ECM-2.5 waterproof electronics.
This product was added to our catalog on May 1, 2024
98064-1, Traxxas TRX-4MT Chevrolet K10 1/18 Scale 4X4 Monster Truck
Traxxas delivers solid-axle monster truck performance and durability to 1/18 scale fans with the new TRX-4MT. A factory-installed Long Arm Lift Kit with eight shocks and large Terra Groove tires give TRX-4MT unrivaled capabilities and towering ground clearance. Available with a highly detailed Chevrolet K10 body, TRX-4MT sets the standard for authentic monster truck performance in a convenient, take-anywhere size.
MODEL 98064-1: TRX-4MT with Chevrolet K10 pickup body: 1/18 scale 4X4 monster truck, fully-assembled, Ready-To-Drive®, with TQ 2.4 GHz 2-channel transmitter, and ECM-2.5 waterproof electronics.
This product was added to our catalog on May 1, 2024
Blackbeard the Bloodthirsty Pirate 1/10 Plastic Model Kit
1/10 Scale. This is a reissue and comes from tooling made back in 2013 by Atlantis. Based on the Classic Aurora kit. This kit comes molded in light gray and brown with the new square box and a decal sheet for his treasure chest. Plastic Parts are molded in China. Decals, instructions and packaging are made in the USA. Includes Blackbeard figure with weapons, ships deck and wheel, treasure chest with waterslide decals with blackbear nameplate.
Within the rogue’s gallery of 16th Century pirates, there were few as fearedas Blackbeard. Born as Edward Teach in 1680 Bristol, England, he trolled theWest Indies and the east coast of Britain’s North American colonies in search ofill-gotten booty.
Upon sight of his ominous sailing ship, “Queen Anne’s Revenge,” most merchantships, as well as would-be opponents, would reverse course and retreat lest theybecome engaged in vicious confrontation with the bloodthirsty sea bandit.
Besides his full and flowing beard from which he coined his imposing sailingname, Blackbeard was also known for his coveted buried treasure, that whichhas yet to be found, even to this day.
AANA145, S2F Hunter Killer Plastic Model Airplane Kit
Plastic Model Kit molded in white and clear with waterslide decals
Made in the USA
Builds into an impressive model.
Officially licensed by the Department of the Navy
A Beautiful plane complete with Display Stand
1/48 Scale. Highly detailed kit comes from the Aurora tooling. Complete with small decal sheet, detailed instructions, rubber tracks and 4 figures. Skill level 2.The Type 97 Chi-Ha was a medium tank used by the Imperial Japanese Army during the Second Sino-Japanese War, the Battles of Khalkhin Gol against the Soviet Union, and the Second World War. It was the most widely produced Japanese medium tank of World War II. A total of 1,162 units were produced from 1938 through 1942.It was equipped with a 57mm main gun, a short-barreled weapon with a relatively low muzzle velocity, designed for infantry support. The main gun had no elevation gear, therefore, the gunner used his shoulder to elevate it! The 170 hp Mitsubishi air-cooled diesel engine was a capable but slow tank engine in 1938.The Type 97's low silhouette and semicircular radio antenna on the turret distinguished the tank from its contemporaries. After 1941, the tank was less effective than most Allied tank designs. In 1942, a new improved version of the Chi-Ha was produced with a larger three-man turret, and a high-velocity Type-1 47mm tank gun. It was designated the Type 97-Kai or Type 97 Shinhoto Chi-Ha.After World War II the Type 97 tanks captured by the Soviets were turned over to the Communists Chinese army. They remained in use under the new ownership, during the Chinese Civil War. After victory, the Chinese People's Liberation Army (PLA) continued to use them in their inventory.
This kit comes molded in 4 colors Red, Black, Silver and clear for the windshield. Features detailed chassis and engine with interior tin. Easy snap construction. Waterslide Decals. Skill level 1.Russell James Liberman was an American funny car drag racer, nicknamed "Jungle Jim." In 2001, he was named #17 on the list of the Top 50 NHRA drivers of all time and is in the International Drag Racing Hall of Fame. Liberman was known for driving backwards at 100 miles per hour after doing his burnout.Liberman was a flamboyant showman who primarily toured the United States at drag racing match race events. During his career, he averaged an estimated 100 events per year during the 1970s. He was regarded by many as the "greatest showman the drag strip has ever experienced." He drove a Vega funny car, in three distinct incarnations. The first Vega, painted candy blue, appeared in August 1972, the 2nd was a darker blue, and the third version (similar to this model) made its debut in 1974.
1/32 Snap Tom McEwen Rail Dragster Plastic Model Kit
1/32 Snap Tom McEwen Rail Dragster Plastic Model Kit
1/32 Scale. Snap assembly. This kit comes molded in 3 colors, Red, Black and Silver. Features detailed Hemi engine, rolling wheels, removable top section, and waterslide decals. Officially licensed. Skill level 1. 8 inches LongTom McEwen was an American drag racer and a winner of the National Hot Rod Association (NHRA) U.S. Nationals. His racing career spanned 45 years. He is ranked at number 16 on a list of the 50 most significant drivers of NHRA�s first 50 years. He received the nickname "the Mongoose" in 1964 from engine builder Ed Donovan. It was originally used as a device to entice Don "the Snake" Prudhomme into a high-exposure match race.In 1972, McEwen won his first major event when he dominated the Top Fuel field at the Bakersfield March Meet. A year later, he scored his first NHRA national event victory by topping the Funny Car field at the SuperNationals at Ontario Motor Speedway.He went on to win four more national events, including his dramatic U.S. Nationals Funny Car victory over Prudhomme in 1978. The win came only a few days after the death of his son Jamie, who had battled leukemia.McEwen won the AHRA World Finals at Spokane Raceway Park in 1982, the prestigious Big Bud Shootout in 1984, and Top Fuel at the 1991 Summernationals at Englishtown, New Jersey.He retired from racing in 1992, and was inducted into the Motorsports Hall of Fame of America in 2001.
1/32 1956 Cadillac Eldorado with Glass Plastic Model Kit
This kit comes from the old amt/revell tooling. Includes chrome plated parts and newly tooled glass. 2 figures, multi piece body and detailed endinge and interior. Skill level 2. Officially licensed from general motors.
