Sign up for our newsletter
Subscribe to our emails
HRASJT253, Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T) This is the Hot Racing Steel 32 Pitch, 53 Tooth Spur Gear with grey hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4. Features: CNC machined and lightened hardened steel construction Black oxide coating for durability and corrosion resistance Grey-colored countersunk washers Specifications: Number of Teeth: 53 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face width: 6mm (0.24 inch) Internal diameter: ~11mm (~0.43 inch) Includes: 54 tooth 32 pitch spur gear (3) mounting screws (3) grey-colored countersunk washers (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate) Requires: Hardened clutch bell or pinon gear Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential. This product was added to our catalog on December 16, 2021
$23.99
HRASSLF254D, Hot Racing Steel Center Diff Spur Gear 32P 54T 0.8m This is the Hot Racing 54 Tooth Center Diff Spur Gear for the 1/10 scale Traxxas Slash 4x4, or Stampede with Center Diff. Traxxas Slash 4x4 Traxxas TRX-4 This product was added to our catalog on December 16, 2021
$14.99
HRASTE256, Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T) Hot Racing Traxxas 32P Steel Pinion & Spur Gear Set (Purple) (18T/56T) (Slash, Rustler, Stampede, Bandit) This is an optional Hot Racing 32 Pitch Steel Pinion and Spur Gear Set for use with the following Traxxas 2WD models: Bandit, Rustler, Slash and Stampede. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur gear Rugged 0.8 Module/32pitch teeth for total reliability on brushless power Aluminum pinion sleeve to allow for either 1/8 inch or 5mm motor shafts Black oxide coated gear for durability and corrosion resistance Purple anodized countersunk aluminum washers High strength hardware Specifications: Number of Teeth: 18T/56T Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face width: ~5mm Includes: (1) 18 tooth 32 pitch (0.8 Mod) pinion gear (1) 56 tooth 32 pitch (0.8 Mod) spur gear (3) mounting screws (3) purple anodized countersunk washers (1) pinion adapter sleeve (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate) This product was added to our catalog on March 16, 2021
$25.99
HRASTE250, Hot Racing Traxxas 32P Steel Spur Gear (Orange) (50T) This is an optional Hot Racing Traxxas 32P 50T Steel Spur Gear with Orange hardware for the 1/10 Traxxas Bandit, Rustler, 2WD Slash, 2WD Stampede, and Telluride vehicles. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur gear Rugged 0.8 Module/32pitch teeth for total reliability on brushless power Black oxide coated gear for durability and corrosion resistance Orange anodized countersunk aluminum washers High strength hardware Specifications: Number of Teeth: 50 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face width: ~5mm Includes: (1) 50 tooth 32 pitch (0.8 Mod) spur gear (3) mounting screws (3) orange anodized countersunk washers (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate) This product was added to our catalog on December 16, 2021
$19.99
HRASTE252, Hot Racing Traxxas 32P Steel Spur Gear (Red) (52T) This is an optional Hot Racing Traxxas 32P 52T Steel Spur Gear with Red hardware for the 1/10 Traxxas Bandit, Rustler, 2WD Slash, 2WD Stampede, and Telluride vehicles. Features: CNC machined and lightened hardened steel construction Replaces stock nylon spur gear Rugged 0.8 Module/32pitch teeth for total reliability on brushless power Black oxide coated gear for durability and corrosion resistance Red anodized countersunk aluminum washers High strength hardware Specifications: Number of Teeth: 52 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face width: ~5mm Includes: (1) 52 tooth 32 pitch (0.8 Mod) spur gear (3) mounting screws (3) red anodized countersunk washers (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate) This product was added to our catalog on May 4, 2021
$19.99
This is the Hot Racing 65 Tooth, 32 Pitch / 0.8Mod Hardened Steel Spur Gear in Black anodize. Features: CNC machined and lightened hardened steel construction Upgrades factory plastic gear Black oxide coating for durability and corrosion resistance Gunmetal/black anodized countersunk washers Specifications:Number of Teeth: 65Gear Pitch: 32 pitch (0.8 module)Mounting Holes: 3Tooth Face width: 6mm (0.24 inch) Includes: (1) 65 tooth 32 pitch (0.8mod) spur gear (3) mounting screws (3) washers (3) gunmetal/black anodized countersunk washers This product was added to our catalog on December 16, 2021
$23.99
Subscribe to our emails