TRA9580, Traxxas Sledge Pre-Assembled Front/Rear Differential
Complete differential comes assembled and ready to install in your Sledge®. Includes differential pinion gear and bearings.
This product was added to our catalog or updated on April 4, 2022
TRA9583, Traxxas Sledge Front/Rear Differential Output Cup
Traxxas Sledge Front/Rear Differential Output Cup. This replacement output cup is intended for the front or rear differential of the Traxxas Sledge. Package includes one output cup and one pin.
This product was added to our catalog on July 19, 2022
TRA3463, Traxxas Cooling Fan Kit w/Shroud
This is a replacement Traxxas Cooling Fan Kit with Shroud, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck and uses the Velineon 540XL motor.
This product was added to our catalog or updated on April 4, 2022
TRA9541, Traxxas Sledge 4X67mm Suspension Pins (2)
Two 4x67 mm hardened steel inner suspension pins fit front or rear
This product was added to our catalog or updated on April 4, 2022
TRA9530, Traxxas, SUSPENSION ARM FRNT RGHT BLK
Product Information:
TRA9530, Traxxas, SUSPENSION ARM FRNT RGHT BLK
Traxxas Vehicles, Parts & Accessories
Traxxas
UPC: 020334953001
This product was added to our catalog or updated on April 4, 2022
TRA9548, Traxxas, CAMBER LINKS REAR
Product Information:
TRA9548, Traxxas, CAMBER LINKS REAR
Traxxas Vehicles, Parts & Accessories
Traxxas
UPC: 020334954800
This product was added to our catalog or updated on April 4, 2022
TRA9547, Traxxas Sledge Front Camber Links w/Hollow Balls
Product Information:
TRA9547, Traxxas Sledge Front Camber Links w/Hollow Balls
Traxxas Vehicles, Parts & Accessories
Traxxas
UPC: 020334954701
This product was added to our catalog or updated on April 4, 2022
TRA7897, Traxxas, TOE LINKS FRONT BLK ALUM
Product Information:
TRA7897, Traxxas, TOE LINKS FRONT BLK ALUM
Traxxas Vehicles, Parts & Accessories
Traxxas
UPC: 020334789709
This product was added to our catalog or updated on April 4, 2022
TRA9549, Traxxas, TOE LINKS FRONT
Product Information:
TRA9549, Traxxas, TOE LINKS FRONT
Traxxas Vehicles, Parts & Accessories
Traxxas
UPC: 020334954909
This product was added to our catalog or updated on April 4, 2022
TRA9543, Traxxas Sledge Rear Outer Suspension Pins
Two 3.5x56.7 mm hardened steel outer rear suspension pins with flanged nylon locknuts (2)
This product was added to our catalog or updated on April 4, 2022
TRA4685, Traxxas Nitro Slipper Friction Pegs
Friction pegs, slipper (12)
Slipper clutch friction pegs (12)
This product was added to our catalog or updated on April 4, 2022
TRA8945R, Traxxas, SKIDPLATE CENTER
Skidplate, center/ 4x20 CCS (4)/ 3x10 CS (4) (fits Maxx® with extended chassis (352mm wheelbase))
Center skid plate for V2 (352 mm wheelbase) Maxx® includes 4x20 mm screws (4) and 3x10 mm screws (4)
This product was added to our catalog or updated on April 4, 2022
TRA9660, Traxxas, SHOCK GT-MAXX ALUM BLUE
Product Information:
TRA9660, Traxxas, SHOCK GT-MAXX ALUM BLUE
Traxxas Vehicles, Parts & Accessories
Traxxas
tra9660
UPC: 020334966001
This product was added to our catalog or updated on April 4, 2022
44056-3, Traxxas Nitro Slash 3.3 1/10 2WD RTR SC Truck w/TQ 2.4GHz Radio, TSM, Battery & DC Charger
Hard-Charging 50+mph Pro 2WD Short Course Performance!
This is the Traxxas Nitro Slash 3.3 1/10 2WD RTR Short Course Truck with an included TQ 2.4GHz Radio System, TSM (Traxxas Stability Management), EZ-Start Engine Starter, EZ-Start Battery, DC Battery Charger and Hawaiian Edition body.
CHARGER NOTE: The included charger requires a cigarette lighter socket found in full size vehicles to charge. If this is not your preference, Traxxas offers an adapter allowing you to charge from a standard home AC electrical socket (TRA2976).
As only Traxxas can, heavyweight horsepower is combined with a lightweight 2WD chassis to deliver astounding performance and over-the-top fun. The award-winning TRX 3.3 engine gives the Nitro Slash tire-melting thrust that is far more than any driver needs--and exactly what every driver wants. It takes Traxxas-Tough durability and a stout drivetrain to handle the TRX 3.3’s outrageous output. Nitro Slash delivers with proven components that have made the Slash the standard for durability, and fun. The extra large capacity of the 150cc fuel tank keeps the action running longer between fill ups and the exclusive EZ-Start electric starting system makes starting as easy as pressing a button.
Traxxas Stability Management
Traxxas Stability Management (TSM) allows you to experience all the extreme power, speed, and acceleration that was engineered into your E-Revo making it much easier to control on common slippery surfaces. Punch it off the line and TSM goes to work sensing the vehicle’s direction and making steering corrections to provide straight-ahead full-throttle acceleration without fishtailing, spinouts, and loss of control. TSM also works during cornering, first making intuitive corrections to maintain your line, and then allowing you to hammer the throttle earlier in the turn for much faster exit speeds. Braking is dramatically improved as TSM works to keep you arrow straight until you come to a complete stop.
Features:
Traxxas Stability Management
High-revving TRX 3.3 Racing Engine for proven championship-winning horsepower and speed
TQi 2.4GHz radio system
Officially Licensed Race Replica Bodies: Mark Jenkins Edition (#25 Traxxas), Chad Hord Edition (#9 BOSS Snowplow), Robby Gordon Edition (#7 Speed Energy), and Traxxas Blue Edition
Scale dimensions and looks of actual short course off-road race trucks
Scale front and rear tube-style bumpers
50+ mph top speed out of the box
Large capacity 150cc fuel tank extends run time
High-torque steering and throttle servos
High-volume dual-stage air filter
Double deck 6061-T6 aluminum and composite chassis
Enclosed receiver box protects against water and fuel
Integrated throttle servo mount with air filter support
Magnum 281 transmission with ball bearings
Large diameter disc brake
Tuned pipe exhaust system
EZ-Start push-button electric starting
Planetary differential with steel gears
Heavy-duty driveshafts
Rubber-sealed ball bearings
SCT chrome-center wheels with color-molded beadlock-style trim ring
Nitro Slash is backed by unparalleled Traxxas support and parts availability
Specifications:
Length: 22.24 Inches (565mm)
Front Track: 11.65 Inches (296mm)
Rear Track: 11.65 Inches (296mm)
Weight (no fuel): 5.76lbs (2.61kg)
Height (overall): 7.40 Inches (188mm)
Wheelbase: 13.07 Inches (332mm)
Front Shock Length: Long Ultra Shock
Rear Shock Length: XXLong Ultra Shock
Front Tires: Slash SCT 2.2" (Pre-Glued with Inserts)
Rear Tires: Slash SCT 2.2" (Pre-Glued with Inserts)
Front Wheels: 2.2" Short Course Race Replica
Rear Wheels: 2.2" Short Course Race Replica
Wheel Diameter: 2.2 Inches (56mm) Outer; 3.0 Inches (76mm) Inner
Gear Ratio: 2.81
Transmission: Nitro Magnum 281
Differential Type: Steel Composite Planetary
Chassis Structure/Material: 2.5mm, 6061-T6 Blue-Anodized Aluminum
Brake Type: Steel Disc with semi-metallic pads
Drive System: Shaft-Driven 2WD
Steering: Bellcrank with integrated servo saver
Radio System: TQi 2.4GHz with TSM
Engine (fuel-powered): TRX® 3.3 Racing Engine with EZ-Start®
Fuel Tank Capacity: 150cc
Top Speed: 50+mph
Skill Level: 4
Included Accessories:
EZ-Start Power Cell
2-amp Peak Detecting Fast Charger
Fuel Bottle
Extra Glow Plug
Air Filter
Precision Tool Set
Needed To Complete:
(8) "AA" Batteries
Nitro Fuel
This product was added to our catalog on October 1, 2021
TRA9558, Traxxas Sledge Steel Front Driveshaft
Replacement 5x133.5 steel front driveshaft
This product was added to our catalog or updated on April 4, 2022
68386-4, Traxxas Slash 4X4 VXL HD
Clipless ProGraphix® Painted Body
Pre-painted body with applied decals
Scale dimensions and looks of actual short course race trucks
Chassis nerf bars absorb impact and support the body
Scale front and rear tube-style bumpers
Extreme Heavy Duty Upgrade Kit Installed
Strengthened C-hubs, axle carriers, steering blocks, and shock towers
Maxx duty® driveshafts
Oversize diameter
6 mm axles
Steel wheel hexes
VXL-3s™ Waterproof Electronic Speed Control
Three programmable drive profiles:
Sport Mode - Forward / Brake / Reverse
Race Mode - Forward / Brake
Training Mode™ - 50% Forward / Brake / 50% Reverse (patented)
Traxxas EZ-Set® one-button setup
Large heat sink
Built-in two-stage low-voltage detection for LiPo batteries
NiMH battery packs: 6-9 cells (7.2 to 10.8 volts)
LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
Velineon® Brushless Motor
Ultra high-temperature sintered Neodymium magnets
Optimized for power and efficiency in 1/10th scale vehicles
Low-maintenance, unique Traxxas design
Efficient, high-speed ball bearings
Precision-balanced rotor
3500kV
Brilliant blue-anodized finish
Traxxas Stability Management® (TSM)
Improves straight line acceleration and braking on low-traction surfaces
Maintains steering composure to allow throttle-on powerslides
Never dulls throttle or slows the truck
Adjusts from off to 100% assistance from the transmitter
TQi™ 2.4 GHz High Output Radio System
TQi 2-channel transmitter
5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
Compatible with optional TQi Traxxas Link Wireless Module (6511) to access full Traxxas Link app functionality (sold separately)
Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
Programmable multi-function knob
Adjustable steering and throttle percentage (dual rates)
Adjustable steering and throttle sensitivity (exponential)
Adjustable steering and throttle end points
Patented waterproof receiver box
Tough Fiber-Composite Modular Chassis
Modular chassis makes maintenance quick and easy
Long 12.75″ wheelbase for increased stability
Easy motor access with single-screw motor plate attachment
All electronics securely fastened to chassis
Easy Access Battery Compartment
Adjustable battery hold down
Accepts 6- and 7-cell flat packs and 7-cell and 8-cell hump packs
Accepts many 2s and 3s LiPo battery configurations
Transmission and Driveline
Full-time shaft-driven 4WD
Blue-anodized aluminum center driveshaft
Heavy-duty slipper clutch & large 32-pitch gears
Sealed, silicone-filled differentials with steel gears
Steering
Digital high-torque 2075 waterproof steering servo
Dual bellcrank steering system with integrated servo saver
Suspension
Heavy-duty composite suspension arms
Adjustable steel turnbuckles
Captured rod ends won't pop off
Springs and Shocks
Fully adjustable oil-filled Ultra Shocks™ with X-ring technology
Race-tuned progressive rate white powder-coated springs
Wheels and Tires
Pre-glued BFGoodrich® Mud Terrain T/A® tires with performance foam inserts
2″ outer diameter, 3″ inner diameter dual-profile SCT wheels
Rubber-Sealed Ball Bearings
Precision Hex Hardware
Backed by Unparalleled Traxxas Support and Parts Availability
Requires Battery and Charger (Sold Separately)
This product was added to our catalog or updated on September 6, 2024
TRA1994, Traxxas Slipper Tension Spring
This is a replacement slipper tension spring from Traxxas. Includes spur gear bushing, slipper tension spring, and 4mm locknut.
Traxxas E-Maxx
Traxxas Nitro Rustler
Traxxas Nitro Slash
Traxxas Nitro Stampede
This product was added to our catalog or updated on April 4, 2022
44096-3, Traxxas Nitro Rustler 1/10 RTR Stadium Truck w/TQi 2.4GHz, TSM, EZ Start, Battery & DC Charger
This is the Traxxas Nitro Rustler 1/10 Scale RTR Stadium Truck, with an included TQi 2.4GHz Radio System, TSM Stability System, TRX 2.5 Racing Engine, 2 AMP Peak Detecting DC Charger and blue body.
CHARGER NOTE: The included charger requires a cigarette lighter socket found in full size vehicles to charge. If this is not your preference, Traxxas offers an adapter allowing you to charge from a standard home AC electrical socket (TRA2976).
The Nitro Rustler is the first name in high performance 2WD nitro stadium trucks. Powered by the proven performance of the TRX 2.5 Racing Engine, Nitro Rustler totally out-muscles the competition with top speeds beyond 50 mph! The TRX 2.5 also pumps out the torque for brutal, wheel-standing launches and absolutely ruthless acceleration. The body design cheats the wind with its smooth curves and low-slung stance, while the outrageous graphics dominate with style. The separate wing securely bolts to the body with precise aluminum hex hardware. Chrome 2.8 Twin Spoke rims are wrapped with pre-glued Alias step-pin tires in the rear and Alias ribbed tires up front. The high-tech rubber compound ensures great grip on a variety of surfaces. Grey-molded composite parts are thoughtfully integrated to enhance the look of the chassis. Fast, light, and loaded with power, Nitro Rustler's power-sliding, dirt roosting attitude will have you reaching for the throttle again and again.
Features:
TRX 2.5 Racing Engine
Low-profile body, ProGraphix paint scheme
Alias tires pre-glued on Twin-Spoke wheels
Powder coated white springs with gray shock bodies
Bolt-on rear wing with aluminum hardware
Rubber-sealed ball bearings
EZ-Start electric starting system
Tuned pipe exhaust system
TQi 2.4GHz radio system
TSM Technology
Double deck 6061-T6 aluminum and composite chassis
Magnum 281 transmission with ball bearings
Adjustable, easy-to-change gear ratios
X-Tra long, fiber-composite, suspension arms
Planetary differential with steel gears
Powerful disc brake
Telescoping, U-joint driveshafts
High-volume, oil-filled Ultra Shocks
Specifications:
Length: 17.25" (438mm)
Front Track: 12.5" (318mm)
Rear Track: 12.375" (314mm)
Weight (no fuel): 73oz (2kg)
Height (overall): 6" (152mm)
Wheelbase: 11.312" (287mm)
Gear Ratio (internal): 2.81
Differential Type: Planetary Gear
Gear Pitch: 32-Pitch
Radio System: Traxxas TQi 2.4GHz (2-Channel), w/TSM Technology
Engine (fuel-powered): TRX 2.5 Racing Engine w/ EZ-Start
Brake Type: Disc
Fuel Tank Capacity: 75cc
Top Speed: 50+mph
Includes:
Nitro Ruster RTR Vehicle
2.4GHz TQi Radio System w/TSM Technology
TRX 2.5 Racing Engine
EZ-Start Starting System
EZ-Start Battery Pack
2 AMP Peak Detecting DC Charger
Extra Glow Plug
Fuel Dispensing Bottle
Foam Air Filter Oil
Needed to Complete:
(4) AA Batteries for Transmitter
(4) AA Batteries for Receiver OR Traxxas Rechargeable Receiver Battery
Nitro Fuel
This product was added to our catalog on May 11, 2021
TRA5675, Traxxas, MOTOR TITAN 775 10-TURN Product Information:
TRX5675, Traxxas, MOTOR TITAN 775 10-TURN
Traxxas Vehicles, Parts & Accessories
Traxxas
trx5675
UPC: 020334567505
This product was added to our catalog or updated on April 4, 2022
TRA9664X, Traxxas Sledge Aluminum Gt-Maxx Shock Caps (Blue) (4)
Traxxas Sledge Aluminum Gt-Maxx Shock Caps. These optional shock caps are designed to provide a layer of durability and style to the Traxxas Sledge.
Package includes four shock caps and four shock cap inserts.
This product was added to our catalog or updated on April 4, 2022
TRA9633, Traxxas Sledge Front Left/Right Suspension Arm Covers (Black)
Add a high-tech look to your Sledge® front suspension arms and keep them clean of debris with these colorful front left and right suspension arm covers. Includes 2.5x8 mm mounting screws (12).
This product was added to our catalog on April 4, 2022
TRA8963T, Traxxas, SHOCK SHAFT GT-MAXX 72MM
Product Information:
TRA8963T, Traxxas, SHOCK SHAFT GT-MAXX 72MM
Traxxas Vehicles, Parts & Accessories
Traxxas
UPC: 020334896377
This product was added to our catalog or updated on April 4, 2022
TRA5359, Traxxas, ROCKER ARM SET PROGRESSIVE-3
Product Information:
TRX5359, Traxxas, ROCKER ARM SET PROGRESSIVE-3
Traxxas Vehicles, Parts & Accessories
Traxxas
trx5359
UPC: 020334535900
This product was added to our catalog or updated on April 4, 2022
TRA9555, Traxxas Sledge 4x88mm Front Center Driveshaft 4mmX88mm
Traxxas Sledge 4x88mm Front Center Driveshaft. This replacement driveshaft is intended for the center front of the Traxxas Sledge. Package includes one driveshaft.
This product was added to our catalog or updated on April 4, 2022
TRA9581, Traxxas Sledge Carrier Differential
Replacement differential carrier with O-rings (2) and ring gear gasket fits front, rear, or center differentials.
This product was added to our catalog or updated on April 4, 2022
TRA9536, Traxxas Sledge Rear Bumper w/Skidplate & Tie Bar Mount
Traxxas Sledge Rear Bumper with Skidplate and Tie Bar Mount. This is a replacement intended for the Traxxas Sledge. Package includes one rear bumper, one skidplate, one tie bar mount and mounting hardware.
This product was added to our catalog or updated on April 4, 2022
TRA9513X, Traxxas Sledge Center Body Support Set
The Sledge® full body support comes assembled with front and rear latches, roof skids, and body reinforcements.
This product was added to our catalog or updated on April 4, 2022
TRA8918A, Traxxas WideMaxx Replacement Body Blue
Product Information:
TRA8918A, Traxxas, BODY MAXX PAINTED BLUE
Traxxas Vehicles, Parts & Accessories
Traxxas
tra8918a
UPC: 020334891891
This product was added to our catalog or updated on April 4, 2022
TRX5223, Traxxas Front and Rear Engine Ball Bearings (TRX 2.5, 2.5R and 3.3)
This is a pack of replacement engine ball bearings for the Traxxas TRX 2.5, TRX 2.5R and TRX 3.3 engines. Included is one front ball bearing (7x17x5mm) and one rear ball bearing (12x21x5mm).
This product was added to our catalog or updated on April 4, 2022
TRA9623, Traxxas Sledge Chassis Skid Plate (Black)
Protect Sledge's aluminum chassis from scrapes and damage with this tough composite skid plate. Available in several bright colors, the heavy-duty skid plate aligns perfectly with the existing mounting holes for a perfect factory fit. Longer attachment screws come in the kit and must be used when mounting the skid plate to the chassis.
This product was added to our catalog on May 10, 2021
TRA6737X, Bumper, rear / bumper mount (fits 4WD Rustler®) (for LED light kit installation)
Traxxas Bumper Rr/Mount 4Wd Rustler Led Kit
This product was added to our catalog or updated on February 15, 2024
TRA8931, Traxxas Body Maxx Rock N Roll Painted Decals (fits Maxx® with extended chassis (352mm wheelbase)
This product was added to our catalog on December 19, 2021
TRA9576T, Traxxas Sledge Pre-Assembled Wheelie Bar (Orange)
Traxxas Sledge Orange Wheelie Bar Assembled. This is an optional upgrade for the Traxxas Sledge helping to keep the vehicle from backflipping during hard acceleration. Package includes one wheelie bar assembly.
This product was added to our catalog on July 19, 2022
TRA9554X, Traxxas Sledge Stub Axles Hardened Steel #9557
Give your Sledge® the ultimate driveline upgrade with these hardened steel rear stub axles. Built for maximum strength and durability, these stub axles fit the standard 9557 driveshaft. Sold in pairs. (Not compatible with 9654X rear CV driveshafts or 9557X rear shafts)
This product was added to our catalog on November 1, 2022
