Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

Associated Electrics Vehicles, Parts & Accessories

143 products


  • ASC302, Reedy AA Alkaline Batteries

    Associated Electrics ASC302, Reedy AA Alkaline Batteries

    22 in stock

    ASC302, Reedy AA Alkaline Batteries

    22 in stock

    $4.50

  • 5463, FT Silicone Diff Fluid, 500,000 cSt

    Associated Electrics 5463, FT Silicone Diff Fluid, 500,000 cSt

    2 in stock

    5463, FT Silicone Diff Fluid, 500,000 cSt

    2 in stock

    $15.99

  • 27221, Reedy T-Plug Charge Lead, 4 mm

    Associated Electrics 27221, Reedy T-Plug Charge Lead, 4 mm

    5 in stock

    27221, Reedy T-Plug Charge Lead, 4 mm

    5 in stock

    $8.99

  • KIM149, Kimbrough 48P Spur Gear (90T) KIM149, Kimbrough 48P Spur Gear (90T)

    Kimbrough KIM149, Kimbrough 48P Spur Gear (90T)

    1 in stock

    KIM149, Kimbrough 48P Spur Gear (90T) Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model.NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on December 19, 2021

    1 in stock

    $6.00

  • KIM148, Kimbrough 87 Tooth Spur Gear 48 Pitch

    Kimbrough KIM148, Kimbrough 87 Tooth Spur Gear 48 Pitch

    6 in stock

    KIM148, Kimbrough 87 Tooth Spur Gear 48 Pitch

    6 in stock

    $6.00

  • ASC29263, Team Associated Sense Innovations ESS-Dual+ Engine Sound Simulator System ASC29263, Team Associated Sense Innovations ESS-Dual+ Engine Sound Simulator System

    Associated Electrics ASC29263, Team Associated Sense Innovations ESS-Dual+ Engine Sound Simulator System

    1 in stock

    ASC29263, Team Associated Sense Innovations ESS-Dual+ Engine Sound Simulator System The Sense Innovations ESS-Dual+ Engine Sound System features two opposing speakers to provide a balanced sound and better diffusion. Lightweight and compact in size, the ESS-Dual+ is easy to install with your choice of four mounting holders included in the box. Plus, the output is circuit, overload and thermally protected, making this the most durable and capable ESS system ever. Applicable to a variety of vehicles: drift, crawler, rally, etc. This product was added to our catalog on December 22, 2021

    1 in stock

    $89.99

  • ASC27201, Reedy 324-S Compact AC Balance Charger

    Associated Electrics ASC27201, Reedy 324-S Compact AC Balance Charger

    1 in stock

    ASC27201, Reedy 324-S Compact AC Balance Charger New! Reedy 324-S Compact Balance ChargerEasy to use and in a compact package, Reedy's 324-S is specifically designed to balance charge LiPo and LiFe batteries in 2-4S configurations making it suitable for a variety of applications that use modern battery technology.Charging is as simple as selecting your battery type and charge rate, and then connecting your battery. Once connected, the charging process begins automatically! Convenient LEDs provides useful charging information and also display error codes should you encounter a faulty battery or poor connections.The Reedy 324-S is an economical solution for your LiPo and LiFe charging needs. Features: AC 100-240V power input LiPo/LiFe compatible 1A/2A/3A selectable charge rate LED charge status indicators 4mm output ports T-plug charge lead included Specifications: AC Input 100-240V, 50-60Hz Battery Type LiPo/LiFe Cell Count 2-4 Series Charger Circuit Power 30W Charge Rate 1A/2A/3A Selectable Dimensions (mm) 110.7 x 69.4 x 40.5 Item First Received: 02/26/2022

    1 in stock

    $65.99

  • ASC5465, Team Associated Silicone Differential Fluid (2oz) (1,000,000cst)

    Team Associated ASC5465, Team Associated Silicone Differential Fluid (2oz) (1,000,000cst)

    1 in stock

    ASC5465, Team Associated Silicone Differential Fluid (2oz) (1,000,000cst) This is a 2oz bottle of a bottle of Team Associated Silicone Differential Fluid. Made in the USA exclusively for Team Associated by Lucas Oil Products. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds. Changing the differential oil in your diffs is one of the most important tuning options for off-road vehicles. Choose from a variety of weights from the pull down menu. This product was added to our catalog on May 11, 2021

    1 in stock

    $19.99

  • KIM147, Kimbrough 48P Spur Gear (84T) KIM147, Kimbrough 48P Spur Gear (84T)

    Kimbrough KIM147, Kimbrough 48P Spur Gear (84T)

    6 in stock

    KIM147, Kimbrough 48P Spur Gear (84T) Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers. Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model. NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on December 19, 2021

    6 in stock

    $6.00

  • 5459, FT Silicone Diff Fluid, 100,000 cSt

    Associated Electrics 5459, FT Silicone Diff Fluid, 100,000 cSt

    3 in stock

    5459, FT Silicone Diff Fluid, 100,000 cSt

    3 in stock

    $13.99

  • ASC9653, Team Associated 48P Spur Gear (81T) ASC9653, Team Associated 48P Spur Gear (81T)

    Associated Electrics ASC9653, Team Associated 48P Spur Gear (81T)

    2 in stock

    ASC9653, Team Associated 48P Spur Gear (81T) Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed. This product was added to our catalog on January 29, 2022

    2 in stock

    $6.00

  • KIM150, Kimbrough 48P Spur Gear (69T) KIM150, Kimbrough 48P Spur Gear (69T)

    Kimbrough KIM150, Kimbrough 48P Spur Gear (69T)

    3 in stock

    KIM150, Kimbrough 48P Spur Gear (69T) Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers. Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count choices to allow you to fine tune the torque and top speed of your model. NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on December 19, 2021

    3 in stock

    $6.00

  • ASC9611, Team Associated Slipper Pads V2 ASC9611, Team Associated Slipper Pads V2

    Associated Electrics ASC9611, Team Associated Slipper Pads V2

    3 in stock

    ASC9611, Team Associated Slipper Pads V2 Team Associated Slipper Pads V2. These are the replacement V2 type slipper pads. Package includes two slipper pads. This product was added to our catalog on March 21, 2021

    3 in stock

    $10.00

  • ASC31383, Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10) ASC31383, Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10)

    Associated Electrics ASC31383, Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10)

    1 in stock

    ASC31383, Team Associated 5.5x2.0mm Aluminum Ball Stud Washer (Blue) (10) This is a pack of ten Team Associated 5.5x2.0mm Aluminum Ball Stud Washers in Blue color. These washers are great to have on hand for a variety of applications.  These small outside diameter shims, common for on-road, are now available separately. Great for all 1/10 scale vehicles.  This product was added to our catalog on April 28, 2021

    1 in stock

    $9.99

  • ASC9648, Spur Gear, 69T 48P

    Associated Electrics ASC9648, Spur Gear, 69T 48P

    5 in stock

    ASC9648, Spur Gear, 69T 48P Team Associated 48 Pitch "Brushless" Spur Gear. These spur gears are compatible with a variety of Team Associated slipper clutch equipped vehicles. Featuring a smaller design, these gears moves the motor forward for better balance and more predictable handling, and allow the use of smaller pinion gears. They allow gear ratios that are optimized for 17.5, 13.5, and 10.5 motors. Features: Smaller design for gear ratios used with 17.5, 13.5 and 10.5 brushless motors. Allows the use of smaller sized pinion gears. Moves motor forward for better balance and more predictable handling. 69T, 72T and 75T available (48 pitch).

    5 in stock

    $6.00

  • ASC91466, Team Associated Diff & Idler Gear Set ASC91466, Team Associated Diff & Idler Gear Set

    Associated Electrics ASC91466, Team Associated Diff & Idler Gear Set

    4 in stock

    ASC91466, Team Associated Diff & Idler Gear Set Team Associated Diff & Idler Gear Set. Package includes replacement gear diff case, and idler gear.  This product was added to our catalog on April 26, 2021

    4 in stock

    $17.99

  • ASC27233, Reedy 1-2S 4mm/5mm Pro Charge Lead

    Associated Electrics ASC27233, Reedy 1-2S 4mm/5mm Pro Charge Lead

    2 in stock

    ASC27233, Reedy 1-2S 4mm/5mm Pro Charge Lead This product was added to our catalog on December 16, 2021

    2 in stock

    $26.99

  • ASC91436, CVA/Wheel Hex Pins

    Associated Electrics ASC91436, CVA/Wheel Hex Pins

    5 in stock

    ASC91436, CVA/Wheel Hex Pins

    5 in stock

    $2.99

  • ASC91150, Team Associated M4 Low Profile Serrated Steel Wheel Nuts (10) ASC91150, Team Associated M4 Low Profile Serrated Steel Wheel Nuts (10)

    Team Associated ASC91150, Team Associated M4 Low Profile Serrated Steel Wheel Nuts (10)

    Out of stock

    ASC91150, Team Associated M4 Low Profile Serrated Steel Wheel Nuts (10) This is a replacement set of Team Associated M4 Low Profile Serrated Steel Wheel Nuts. Package includes ten M4 nuts. This product was added to our catalog on October 20, 2021

    Out of stock

    $7.99

  • ASC5448, Team Associated Silicone Differential Fluid (2oz) (80,000cst) ASC5448, Team Associated Silicone Differential Fluid (2oz) (80,000cst)

    Associated Electrics ASC5448, Team Associated Silicone Differential Fluid (2oz) (80,000cst)

    6 in stock

    ASC5448, Team Associated Silicone Differential Fluid (2oz) (80,000cst) This is a 2oz bottle of a bottle of Team Associated Silicone Differential Fluid. Made in the USA exclusively for Team Associated by Lucas Oil Products. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds. Changing the differential oil in your diffs is one of the most important tuning options for off-road vehicles. Choose from a variety of weights from the pull down menu. This product was added to our catalog on May 9, 2021  

    6 in stock

    $13.99

  • JCO0455, 1968 Pontiac Firebird Pro: The Machine, Clear Body

    JConcepts JCO0455, 1968 Pontiac Firebird Pro: The Machine, Clear Body

    1 in stock

    JCO0413, 2002 Chevy S10 drag truck, Street Eliminator body

    1 in stock

    $60.00

  • ASC20160, DR28 Drag Race Car RTR

    Team Associated ASC20160, DR28 Drag Race Car RTR

    Out of stock

    ASC20160, DR28 Drag Race Car RTR Team Associated's DR28 1:28 scale electric 2WD RTR Drag Race Car may be small in size, but it's packed full of features and ready for fun right out of the box. The DR28 is a no-nonsense pint-sized Drag Car that looks great and drives smooth thanks to a powerful electric motor and capable drivetrain. No need to prep or build your racer; just charge it and you're ready to drive! The included 2.4GHz transmitter allows complete control, enabling you to navigate around, through and over obstacles with ease! The DR10-inspired wheels and body make for a great-looking package that will also perform well on the staggered-size foam tires. When the DR28's integrated LiPo battery becomes discharged, the convenient built-in transmitter charger makes it easy to get back to full power and ready to run in less than an hour. A built-in rechargeable LiPo battery and 4 AA's are included, making the car ready to go right out of the box! Features: Everything included in the box–just charge and go! Drag car-inspired body and wheels 2.4GHz 2-channel radio with integrated charger Integrated ESC/Receiver unit Integrated proportional servo

    Out of stock

    $87.99$69.99

  • ASC9003132C, Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo w/2.4GHz Radio, DVC & Battery & Charger ASC9003132C, Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo w/2.4GHz Radio, DVC & Battery & Charger

    Team Associated ASC9003132C, Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo w/2.4GHz Radio, DVC & Battery & Charger

    5 in stock

    ASC9003132C, Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo w/2.4GHz Radio, DVC & Battery & Charger The Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo includes a Reedy Compact Balance Charger (ASC27201) and Reedy 7.4V 2S LiPo Battery with T-plug (ASC751). This buggy was engineered using Team Associated's vast knowledge and success in the 1:10 scale 2WD racing category. Since the introduction of the RC10 in 1984, the Team Associated RC10 buggy platform has won 13 of the 18 I.F.M.A.R. World Championships contested since the class began. You now have the chance to drive a buggy derived from this race-winning heritage with the beginner-friendly, capable and powerful RB10. The RB10 buggy roars to life with a water-resistant high-power Reedy brushless speed control, 3300kV brushless motor, a 2.4GHz 2-channel radio system and the Drive Vehicle Control (DVR) receiver with a built in gyro. The DVR system is able to be tuned to different settings that will allow for more or less gyro control. The RB10 is equipped with the Reedy metal-gear, digital high-torque servo, and a water-resistant enclosed receiver box. All of this sits under the outstanding factory-finished off-road buggy body with wing. The RB10 will keep you accelerating and cornering with the included aggressive off-road treaded tires and lightweight 12mm hex wheels. The RB10 will perform on most surfaces you throw it at, from asphalt to dirt as well as any prepared track surfaces. This buggy makes for a great basher and a good platform to try your skills out on the track. Features: Combo includes a Reedy Compact Balance Charger (ASC27201) and Reedy 7.4V 2S LiPo Battery with T-plug (ASC751) 2.4GHz 2-channel radio with a DVC (Dynamic Vehicle Control) receiver featuring a built-in adjustable gyro High-torque, metal-gear Reedy servo with spring style servo saver Powerful Reedy 3300kV brushless motor Water-resistant, high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff Water-resistant, enclosed receiver box Factory-finished off-road buggy body and wing, with two color schemes to choose from (blue and red) Off-road buggy race car-inspired dish wheels High-grip, off-road tires with aggressive tread pattern Aluminum 12mm big bore coil-over shock absorbers Durable and lightweight aluminum top shaft Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S and 3S LiPo battery packs Rear CVA driveshafts for more durability 2.6:1 ratio gearbox with heavy-duty sealed gear differential and extremely adjustable slipper clutch Rugged steel turnbuckles for adjustable camber and front toe-in Adjustable suspension geometry Vertical ball ends for roll center adjustments, front and rear Metric hardware throughout 22 precision rubber-sealed ball bearings Many Factory Team options already available! Specifications: Scale: 1:10 Power Source: Electric Terrain: Off-Road Body Style: Buggy Assembly Level: Assembled Power: Electric Length: 400mm (15.75”) Width: 248mm (9.76”) Wheelbase: 277.8mm (10.94") Weight: 1405g (3.1lb) Drive: 2WD Transmission Ratio: 2.6:1 Includes: (1) Team Associated RB10 RTR 2WD Buggy (1) 2.4GHz 2-channel Radio (1) Reedy Charger (1) Reedy 2S Lipo Battery Needed to Complete: (4) AA Batteries for Transmitter This product was added to our catalog on May 11, 2023

    5 in stock

    $329.99

  • 5452, FT Silicone Diff Fluid, 3,000 cSt

    Associated Electrics 5452, FT Silicone Diff Fluid, 3,000 cSt

    Out of stock

    5452, FT Silicone Diff Fluid, 3,000 cSt

    Out of stock

    $9.99

  • JCO0267, 1/10 1972 Chevy C10 Clear Body, requires JCO2173: Traxxas Slash JCO0267, 1/10 1972 Chevy C10 Clear Body, requires JCO2173: Traxxas Slash

    JConcepts JCO0267, 1/10 1972 Chevy C10 Clear Body, requires JCO2173: Traxxas Slash

    1 in stock

    JCO0267, 1972 Chevy C10 Clear Body, requires JCO2173: SLH 1/10 1972 Chevy C10 Clear Body, requires JCO2173: Traxxas Slash

    1 in stock

    $43.00

  • 91786, RC10B6.1 Gear Differential Kit 91786, RC10B6.1 Gear Differential Kit

    Associated Electrics 91786, RC10B6.1 Gear Differential Kit

    5 in stock

    91786, RC10B6.1 Gear Differential Kit

    5 in stock

    $44.99

  • 5461, FT Silicone Diff Fluid, 200,000 cSt

    Associated Electrics 5461, FT Silicone Diff Fluid, 200,000 cSt

    1 in stock

    5461, FT Silicone Diff Fluid, 200,000 cSt

    1 in stock

    $13.99

  • KIM207, Kimbrough 64P Precision Spur Gear (100T) KIM207, Kimbrough 64P Precision Spur Gear (100T)

    Kimbrough KIM207, Kimbrough 64P Precision Spur Gear (100T)

    7 in stock

    KIM207, Kimbrough 64P Precision Spur Gear (100T) Kimbrough Products 64 Pitch precision spur gears have been used to set all of the unlimited speed records for R/C 1/10 scale electric cars in the U.S., and are used by a majority of the top professional R/C car racers around the world. The best drivers in the world trust Kimbrough gears, so you know you can too! Kimbrough spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers. Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count options to allow you to fine tune the torque and top speed of your model. NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on November 18, 2021

    7 in stock

    $6.00

  • 91609, FT Clamping Wheel Hexes, 5.0 mm offset

    Associated Electrics 91609, FT Clamping Wheel Hexes, 5.0 mm offset

    7 in stock

    91609, FT Clamping Wheel Hexes, 5.0 mm offset

    7 in stock

    $16.00

  • KIM228, Kimbrough 64P Precision Spur Gear (90T) KIM228, Kimbrough 64P Precision Spur Gear (90T)

    Kimbrough KIM228, Kimbrough 64P Precision Spur Gear (90T)

    Out of stock

    KIM228, Kimbrough 64P Precision Spur Gear (90T) Kimbrough Products 64 Pitch precision spur gears have been used to set all of the unlimited speed records for R/C 1/10 scale electric cars in the U.S., and are used by a majority of the top professional R/C car racers around the world. The best drivers in the world trust Kimbrough gears, so you know you can too! Kimbrough spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better then any other color - and high temperatures are not good for thermo-setting plastics. This plastic is almost three times tougher and will withstand operating temperatures 75° to 125° higher than plastics used by other R/C car gear manufacturers.Kimbrough spur gears are full width, because a narrow or profiled plastic gear can deform under load, is weaker and less efficient. This can cause drag in the gear train and waste horsepower. The wider a gear is, the more load it can handle. The only time gear engineers narrow gears, is when there is a space limitation. Kimbrough Racing Products gears run quiet because they have the correct tooth shape and don't have to be narrowed. Choose from a variety of tooth count options to allow you to fine tune the torque and top speed of your model.NOTE: The use of full width pinion gears is highly recommended. This product was added to our catalog on December 22, 2023

    Out of stock

    $6.00

  • ASC92014, Team Associated Arm Mount Inserts

    Team Associated ASC92014, Team Associated Arm Mount Inserts

    7 in stock

     Team Associated Arm Mount Inserts. These are the replacement inserts for the RC10 B6 and B6D buggies. Includes Arm Mount Insert (4) 0, 0 (4) 0, 0.35 (4) 0, 0.7 (4) 0.35, 0.35 (4) 0.7, 0.7 This product was added to our catalog on October 28, 2023

    7 in stock

    $9.99

  • KIM378, 78 Tooth Spur Gear 48 Pitch

    Kimbrough KIM378, 78 Tooth Spur Gear 48 Pitch

    2 in stock

    KIM378, 78 Tooth Spur Gear 48 Pitch

    2 in stock

    $6.00

  • ASC91438, Team Associated CVA Rebuild Kit ASC91438, Team Associated CVA Rebuild Kit

    Team Associated ASC91438, Team Associated CVA Rebuild Kit

    2 in stock

    ASC91438, Team Associated CVA Rebuild Kit This is a replacement Team Associated CVA Rebuild Kit. This package includes two CVA couplers and two CVA pins. This product was added to our catalog on March 13, 2021

    2 in stock

    $6.99

  • 91047, Heavy-duty Ballstuds, 6 mm, long neck

    Associated Electrics 91047, Heavy-duty Ballstuds, 6 mm, long neck

    2 in stock

    91047, Heavy-duty Ballstuds, 6 mm, long neck

    2 in stock

    $15.99

  • 71195, SR10 Rear Wheels with Street Stock Tires, mounted

    Associated Electrics 71195, SR10 Rear Wheels with Street Stock Tires, mounted

    14 in stock

    71195, SR10 Rear Wheels with Street Stock Tires, mounted

    14 in stock

    $39.99

  • 6943, FT Locknuts, 8-32, blue aluminum

    Associated Electrics 6943, FT Locknuts, 8-32, blue aluminum

    2 in stock

    6943, FT Locknuts, 8-32, blue aluminum

    2 in stock

    $5.99

  • 5453, FT Silicone Diff Fluid, 5,000 cSt

    Associated Electrics 5453, FT Silicone Diff Fluid, 5,000 cSt

    1 in stock

    5453, FT Silicone Diff Fluid, 5,000 cSt

    1 in stock

    $9.99

  • JCO0418, 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear) JCO0418, 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear)

    JConcepts JCO0418, 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear)

    2 in stock

    JCO0418, JConcepts 2019 Cadillac ATS-V Street Eliminator Drag Racing Body (Clear) The JConcepts 2019 Cadillac ATS-V Street Eliminator Drag Racing Body is a great way to add customization and a personalized flair to your Street Eliminator set-up. The ATS-V is Cadillac's vigorous, brawny contender, eager to represent against all other performance rides. JConcepts took on recommendations from racers and dove into a project utilizing the coupe style vehicle for the drag racing community. The Cadillac features a V-forged front-end with details chiseled into the headlight area which draws up the fender and over the hood. Undercuts throughout the nose culminate at the bottom with built-in splitter and recess vents. The included front hood-scoop brings a drag racing flair and blends up to the gradually shaped windshield. The roof is slightly railed, channeling the air over the rear-end and coupe section down to the trunk-lid. Fender flares protrude from the main body shape blend into the railed and splitter along the rocker-panels. The rear trunk cover fits and flows around the back to a recessed center section and allows perfect positioning of the rear taillights. The included taillight decals fold around the individual sections of the quarter-panels to provide that all-important Cadillac look. An included lower support structure and upper top wing is included to bring out another side to the Cadillac which is a drag racing animal. Included in each body set, a 2019 Cadillac ATS-V decal sheet and the paint mask for all windows. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Features: 2019 Cadillac ATS-V faithful representation Direct fit for Team Associated DR10 Sized for an assortment of SCT length trucks with width modifications Rear trunk deck spoiler with lower support structure Decal sheet with Cadillac and JConcepts badges. Officially licensed by Chevrolet to JConcepts. Specifications: Wheelbase: 13.00" Inside Dimensions:  Front: 11.50"  Rear: 12.00” This product was added to our catalog on December 16, 2021

    2 in stock

    $60.00

  • 91814, 12mm Shock Caps and Spring Cups

    Associated Electrics 91814, 12mm Shock Caps and Spring Cups

    10 in stock

    91814, 12mm Shock Caps and Spring Cups

    10 in stock

    $12.99

  • rc10 bulkhead rc10 bulkhead

    Associated Electrics rc10 bulkhead

    5 in stock

    91673, RC10B6 Front Suspension Arms, gull wing Team Associated B6 "Gullwing" Front Arms. These are the replacement gullwing front arms for the RC10 B6D, but when combined with the gullwing front shock tower (ASC91663) are compatible with the B6 as well. Compatibility Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B6.2 Team Associated RC10 B6.2D Team Associated RC10 B6D This product was added to our catalog on August 11, 2021

    5 in stock

    $9.99