Great Service - Great Selection - Great Prices
Hobby Interests: Aircraft, Helicopters and Multirotor, Cars, Trucks and Surface Vehicles, Boats and Marine, General Hobby, Plastic & Diecast Models
Tamiya R/C Vehicles
Tamiya TAM58518, Tamiya 1/10 Super Clod Buster 4WD Monster Truck Kit
Overview Key Features The Super Clod Buster body has been reproduced in injection-molded plastic Highly-durable bathtub type monocoque chassis frame Front/rear trailing arm suspension with 8 coil spring dampers Front/rear sealed gearboxes are equipped with differential gears Kit includes TEU-103BK ESC. (Original kit included a mechanical speed controller) Two 540 motors included Sticker sheet included Needed To Complete 2-channel radio system 7.2 volt battery and charger Tamiya synthetic lacquer spray paint to complete Overview The Super Clod Buster is back! This monster truck features a body that was inspired by classic pick-up trucks from the 1980’s, giving it a realistic appearance. The front grille, air intake and roll bar are recreated with metal-plated parts. The truck also features a twin-motor dual gearbox 4WD drivetrain, 8 coil spring dampers and massive 165mm diameter tires, as well as a 4-wheel drive steering system to help the model navigate tight corners. Specifications Completion Level: Kit Drivetrain: 4WD Power Type: Electric Receiver: Sold Separately Scale: 1/10 Speed Control: Sold Separately Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World." Now Tamiya is offering more than 300 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies. The leader in hobby products around the world Made using the highest quality components and materials Test for durability and safety
$412.00$288.40
Tamiya TAM47458-60A, Tamiya Thunder Dragon 2021 1/10 4WD Off-Road Electric Buggy Kit
The Tamiya Thunder Dragon 2021 is a re-issue of the classic 1988 Thunder Dragon buggy. The buggy utilizes shaft-driven 4WD and smooth, ground hugging suspension to create a super-fun driving experience. The stylish Thunder Dragon body which appeared in a classic R/C comic in Japan, is an exciting re-release for R/C fans of all ages and abilities. This specific kit includes a Hobbywing THW-1060 Brushed ESC for incredible performance. NOTE: Finished kit shown in photos is for illustrative purposes only. This is a kit that requires assembly. See needed to complete list below for a list of items required to complete the model. Features: 1/10 scale R/C model assembly kit The chassis is based around an ABS plastic bathtub frame for excellent durability and ease of maintenance 4-wheel double wishbone suspension uses CVA oil shock-dampers and a front stabilizer for a superior ride Features shaft-driven 4WD with front and rear die-cast 3-bevel differentials for smooth, superior handling feel Semi-pneumatic spike tires give great grip, and are paired with large-diameter ABS wheels Thunder Dragon body is molded in polycarbonate, with non-canopy sections pre-painted in silver, pre-cut for convenience Includes a Hobbywing THW-1060 Brushed ESC Includes 540 brushed type motor Specifications: Length: 390mm Width: 240mm Height: 130mm Wheelbase: 260mm Adjustable Gear Ratio: Fixed Bearings Plastic: bushing Body Material: Polycarbonate Body Stickers: Included Chassis Material: ABS Plastic Construction Type: Assembly Kit Differential Type: Gear Drive Type: 4WD Motor: 540-brushed type Scale: 1/10 Shock Damper: CVA Oil Filled Suspension: 4-wheel fully independent double wishbone Terrain Use: Off-Road Needed to Complete: 2 channel radio system Steering servo 7.2 - 7.4 volt battery Compatible Charger
$412.00$189.99
Tamiya TAM58613, 1/10 Toyota Supra 4WD TT-02D Drift Spec Kit
TAM58613, 1/10 Toyota Supra 4WD TT-02D Drift Spec Kit Product Details One of the most recognized Japanese sports cars around the world is the Toyota Supra. It has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Tamiya brings this well-known machine in the form of a Drift Kit on the TT-02D Drift Spec chassis. The Supra depicted in this kit is that of the Mark IV A80, which ceased to be produced in 2002. The TT-02 chassis is an entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine. Key Features Features separately-molded side mirror and rear wing parts. Includes carbon pattern decals for engine hood and rear wing. The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. Features 24mm width drift-spec tires on metal-plated mesh wheels. Sport-tuned motor and aluminum motor heat sink included. Fully independent double wishbone suspension In The Box (1) 1/10 Toyota Supra 4WD TT-02D Drift Spec Kit Needed to Complete 2 Channel Radio & Receiver ESC Battery Pack and Charger Product Specifications Speed Control Sold Separately Vehicle Type On-Road Completion Level Kit Drivetrain 4WD Power Type Electric Motor Size 540 Motor Type Brushed Receiver Sold Separately Scale 1/10
$256.00$199.99
Tamiya TAM58703-A, RC AU TOM'S GR Supra TT02
This R/C model recreates the Toyota GR Supra GT500. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons from 2017 to 2019. With the streamlined car design of the roadgoing GR Supra, this racing car features a carbon monocoque frame, dedicated aerodynamic components and transmission, plus a 2,000cc inline 4-cylinder direct injection turbo-charged engine "RI4AG." The accurately depicted au Tom's GR Supra body is made of polycarbonate and ABS plastic wing and mirror pieces, which sits on top of our most builder user friendly TT-02 entry-level on-road chassis. TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels and slick tires make for a racy finish. Specifications: 1/10 scale R/C model assembly kit. Length: 466mm, width: 188mm, height: 125mm. Wheelbase: 257mm. The body is made of lightweight, rigid polycarbonate with separate polycarbonate front light cases (LEDs are not attachable) and canards. Separate black ABS resin parts realistically depict distinctive side mirrors and a large rear wing. The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability. 12-spoke gun metal wheels are paired with racing slick tires. Includes motor and THW-1060 ESC.
$189.99
Tamiya TAM58613-60A, Tamiya Toyota Supra 1/10 4WD Drift Spec Kit (TT-02D)
This is a Tamiya 1/10 Toyota Supra 4WD TT-02D Drift Spec Kit. One of the most recognized Japanese sports cars around the world is the Toyota Supra. It has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Tamiya brings this well-known machine in the form of a Drift Kit on the TT-02D Drift Spec chassis. The Supra depicted in this kit is that of the Mark IV A80, which ceased to be produced in 2002. TT-02 Drift Chassis Enjoy the thrill of drifting with this specially tuned drift spec version of the TT-02 chassis. The chassis also features drift spec parts such as 24mm width drift tires (fitted to stylish matte-finish metal-plated wheels), and CVA shock units on the 4-wheel double wishbone suspension. Full ball bearings, an aluminum motor heat sink, and a sport-tuned motor come as standard. Of course, the chassis retains the original TT-02's excellent drivability, ease of maintenance, and adaptability.NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Bathtub-type Frame Shaft Driven 4WD Front/Rear 4-Bevel Resin Differentials 3-Piece Steering Tie-Rod 4-Wheel Double Wishbone Suspension Front/Rear CVA Oil Shocks 540 Sport-Tuned Motor Full Ball Bearings Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S) Specifications: Length: 457mm Width: 186mm Height: 125mm Wheelbase: 257mm Tire Width/Diameter (Front & Rear): 24/63mm Gear Ratio: 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) Needed to Complete: 2 channel radio system Steering servo Polycarbonate paint for body 7.2V - 7.4V Battery w/Tamiya Connector (Must use round type battery pack. Square shaped batteries will not fit battery compartment.) Compatible Battery Charger
$256.00$209.99
Tamiya TAM58518A, Tamiya 1/10 Super Clod Buster 4WD Monster Truck Kit
Product Details In The Box (1) 1/10 Super Clod Buster 4WD Truck Kit (1) HobbyWing THW 0880 Brushed Dual Motor ESC (2-4S) (2) 540-brushed type motors (1) Body Stickers (1) Product Manual Needed to Complete 2-channel radio Steering servo 7.2volt battery & battery charger Tamiya TS paint Features The Super Clod Buster body has been reproduced in injection-molded plastic Highly-durable bathtub type monocoque chassis frame Front/rear trailing arm suspension with 8 coil spring dampers Front/rear sealed gearboxes are equipped with differential gears Two 540 motors included Sticker sheet included Overview Tamiya is proud to present the Super Clod Buster as an assembly kit. This monster truck features an American pick-up truck like body that gives it a realistic appearance. Front grill, air intake and roll bar have been recreated with metal plated parts. The Super Clod Buster features a twin-motor dual gearbox 4WD drive train, a durable link-arm, 8 coil springs and massive 165mm dia. tires for powerful and efficient running to overrun any obstacle. Want to enjoy monster truck running? The Super Clod Buster is made for you! Two motors and 4WS system: The Super Clod Buster is equipped with two motors and tightly sealed gearboxes that have been molded as one piece with axle housing. Minimum power loss and smooth cornering are obtained thanks to a gear train transmission and differentials. The included Dual Motor ESC provides ample power to get your truck over obstacles. Furthermore, this monster truck is also equipped with a 4WS system for 4-wheel drive steering. This feature makes tight cornering with such a big machine easy! Product Specifications Completion Level Kit Charger Sold Separately Battery Sold Separately
$319.99
Tamiya TAM58618, RC Tamiya Monster Beetle 2015
RC MONSTER BEETLE 2015 The Tamiya Monster Beetle was a classic R/C phenomenon from the 1980's. After a long absence it is back as an updated assembly kit ready to traverse back yards across the country. The model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted with big tires for rough-and-tumble off-road fun. This updated version promises to be great fun for both beginners and Tamiya R/C kit veterans alike!
$274.00$192.00
Tamiya TAM56302, 1/14 Semi Box Trailer Kit
TAM56302, 1/14 Semi Box Trailer Kit Product Details Key Features Hard anodized aluminum panels for the utmost in durability & realism Rear gate doors that are opened with realistic latches and hinges Retractable support legs that automatically retract when the trailer is hitched to the truck Chrome wheels with rubber tires (eight of each--for dual wheels) Rubber wheel chocks Realistic suspension with leaf springs and coil shocks Aluminum frame, gate, gate frame and metal hinges for the rear gates (doors) In The Box Decal sheet ("Intercontinental Express", license plates, numbers, "Tamiya") Illustrated instructions Metal wheel bushings (8) Needed to Complete Building equipment only: Hobby knife, Phillips screwdriver, thread lock, CA glue. Overview This Box Trailer can be hitched-up to a Tamiya 1/14 scale R/C tractor truck. This trailer uses hard-anodized aluminum panels for the utmost durability and realism. Rear gate doors are open-able, just as seen on full-sized trailers. Product Specifications Chassis Aluminum Ladder Completion Level Kit Power Type Electric Motor Type Brushed Scale 1/14 Suspension Solid axle Vehicle Type Semi Trailer
$507.00$354.90
Tamiya TAM56306, 1/14 Semi Flatbed Trailer Kit
TAM56306, 1/14 Semi Flatbed Trailer Kit Product Details This highly realistic 1/14 scale flatbed semi-trailer model is for use in combination with Tamiya's 1/14 R/C tractor truck. A scale appearance is achieved by using authentic components such as aluminum chassis/frame, wood-floored platform and actual chains Product Specifications Receiver Sold Separately Scale 1/14 Power Type Electric Completion Level Kit Suspension Solid axle Speed Control Sold Separately Vehicle Type Semi Trailer Chassis Aluminum Ladder
$329.00$230.30
Tamiya TAM56344, 1/14 Grand Hauler 4WD Semi Tractor Kit
Product Details Overview The Grand Hauler resembles a classic customized American tractor truck. The included 540 motor drives a 3-speed transmission, which has no problem turning the dual rear axles. Leaf spring and shocks keep the axles suspended to the metal C-Channel ladder frame, which keeps the power to the pavement. This customized beauty, sports some new hardware. Front Bumper Grille Visor Stretched Chassis Side Steps Rear Fenders Rear Bumper Driver figure Custom fat exhaust stacks And more... Whether by itself or coupled to an optional trailer, the Grand Hauler is sure to turn heads. Product Specifications Completion Level Kit Drivetrain 4WD Power Type Electric Motor Type Brushed Receiver Sold Separately Scale 1/14 Speed Control Sold Separately Vehicle Type Semi Tractor
$580.00$406.00
Tamiya TAM56041, 1/16 U.S. Main Battle Tank M1A2 Abrams Full-Option Kit
Overview Key Features The angular Abrams form is accurately recreated Take control of forward/reverse movement, a range of turns and pivots, turret rotation and gun elevation. Gun recoil and vehicle kickback are also recreated Authentic gas turbine engine and firing sounds are coordinated with model actions Gun barrel control system factors in the model movement and elevation changes keep main gun trained in a direction set via the transmitter Compatible with separately sold 4-channel transmitter BONUS! U.S. kit version includes 32 850-size ball bearings that replace the included brass bushings for the road wheels! Needed To Complete Radio Charger Battery Paint 8 AA Batteries Glue Tools Overview This large-scale Big Tank Series R/C model assembly kit recreates the formidable modern U.S. Main Battle Tank M1A2 Abrams. The M1 Abrams was formally adopted in 1980, and features highly recognizable flat surfaces and angular form, plus a powerful gas turbine engine. It was designed to be upgrade friendly, and various modifications throughout its service life have seen it remain at the cutting edge of military technology into the present day. One upgraded variant was the M1A1HA, which supported a 120mm smoothbore gun and depleted uranium armor on the turret and hull; the M1A2 evolved this design further with technological advancements such as the CITV thermal imaging sight, a Positive/Navigation System and integrated sights for the commander and the driver. Its IVIS system allows advanced communication and information sharing between friendly vehicles. The M1A2 appeared in 1992 and in 2003 it saw its first action, in operations in Iraq. Specifications Completion Level: Kit Drivetrain: 2WD Motor Type: Brushed Power Type: Electric Receiver: Sold Separately Scale: 1/16 Speed Control: Sold Separately Vehicle Type: Military
$1,186.50