Brushless Motors

14 products


  • TRITEP2023, Slot Machine 21.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Trinity TRITEP2023, Slot Machine 21.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Out of stock

    Slot Machine 21.5T Race Spec Brushless Motor w/TEP1119 Rotor After months of hard work and testing we are proud to show off the all new Slot Machine. They say that you should never forget where you come from. Here at Team Trinity we always like to take a good trip down memory lane to never forget where we came from. With that said, we are happy to bring back the Slot Machine name with our newest spec motor!The Slot Machine picks up exactly where the X-Factor left off but goes a few steps further. The Slot Machine has a brand new, ground up, stator design that was designed with speed, durability, and efficiency all in mind. Both ends feature CNC machined end plates not only for looks, but functionality as well. With tons of space for heat to escape, you can be confident that your Slot Machine is staying cool in even the hottest of conditions. Having an open stator design not only helps with heat, but also allows for the use of long screws. The long screws go through both end plates as well as the new stator with new, reformulated, epoxy specially designed for strength as well as heat dissipation. Both durability and efficiency all in one! Not only that but, all new 90 degree solder tabs make soldering up your brand new Slot Machine a breeze! Features: New 90 degree solder tabs 2pc CNC Machined Aluminum can allows for more accurate deviation readings X-Flow Cooling which pulls more air through the can, reducing motor temps Infinite timing adjustment capabilities Modular Design with whole-can length hardware and replaceable end caps All new stator design with an immense amount of low end torque without skimping on efficiency

    Out of stock

    $109.99

  • TRIPUN1002, Punisher 17.5 Turn Spec Class Sensored Brushless Motor

    Trinity TRIPUN1002, Punisher 17.5 Turn Spec Class Sensored Brushless Motor

    Out of stock

    TRIPUN1002, Punisher 17.5 Turn Spec Class Sensored Brushless Motor Features: Infinite Timing Adjustment True Zero Point Updated Sensor Board Design Open Bearing On Sensor End For Easy Cleaning and Oiling Lower Resistance Solder Tabs Maximized Can Cooling Vents

    Out of stock

    $99.99

  • TRITEP2023T, Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor (21.5T) TRITEP2023T, Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor (21.5T)

    Trinity TRITEP2023T, Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor (21.5T)

    Out of stock

    TRITEP2023T, Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor (21.5T) This is the Team Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor. Using an updated stator design gives this motor more speed, durability and efficiency. Adding to this the highly CNC milled motor case reduces weight and allows heat to escape easily. With high quality construction, innovative internal components and looks that will make your friends envious, the Team Trinity Revtech "Slot Machine" motor is a must have.This Team Spec edition is in the top 5% of the batch of motors. Every team motor goes through rigorous inspection process and only the top 5% get to become Team Spec motors.Features: Updated 90 degree solder tabs  2pc CNC Machined Aluminum can allows for more accurate deviation readings X-Flow Cooling which pulls more air through the can, reducing motor temps  Infinite timing adjustment capabilities  Modular Design with whole-can length hardware and replaceable end caps  Updated stator design with an immense amount of low end torque without skimping on efficiency Reformulated thermal Epoxy for best in class thermal dissipation  Ultra-Rare Earth material magnets for heat resistance and longevity   Same proven sensor board as X-Factor Modified  Sealed bearings for durability and high performance  TRITEP1119 12.5x25.5mm Rotor Included!  Designed well within ROAR, EFRA, and BRCA standards  Team Spec Edition Features: Top 5% of all stators Marked Resistance numbers in the box Visually inspected for imperfections  Includes: (1) 21.5T Team Trinity Revtech "Slot Machine" ROAR Team Spec Class Brushless Motor (1) Sensor cable This product was added to our catalog on October 25, 2022.

    Out of stock

    $119.99

  • TRITEP2022, Slot Machine 17.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Trinity TRITEP2022, Slot Machine 17.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Out of stock

    After months of hard work and testing we are proud to show off the all new Slot Machine. They say that you should never forget where you come from. Here at Team Trinity we always like to take a good trip down memory lane to never forget where we came from. With that said, we are happy to bring back the Slot Machine name with our newest spec motor!The Slot Machine picks up exactly where the X-Factor left off but goes a few steps further. The Slot Machine has a brand new, ground up, stator design that was designed with speed, durability, and efficiency all in mind. Both ends feature CNC machined end plates not only for looks, but functionality as well. With tons of space for heat to escape, you can be confident that your Slot Machine is staying cool in even the hottest of conditions. Having an open stator design not only helps with heat, but also allows for the use of long screws. The long screws go through both end plates as well as the new stator with new, reformulated, epoxy specially designed for strength as well as heat dissipation. Both durability and efficiency all in one! Not only that but, all new 90 degree solder tabs make soldering up your brand new Slot Machine a breeze! Features: New 90 degree solder tabs 2pc CNC Machined Aluminum can allows for more accurate deviation readings X-Flow Cooling which pulls more air through the can, reducing motor temps Infinite timing adjustment capabilities Modular Design with whole-can length hardware and replaceable end caps All new stator design with an immense amount of low end torque without skimping on efficiency

    Out of stock

    $109.99

  • Sale -33% TRIDM35, Drag Master 3.5T Holeshot Brushless Motor

    Trinity TRIDM35, Drag Master 3.5T Holeshot Brushless Motor

    Out of stock

    TRIDM35, Drag Master 3.5T Holeshot Brushless Motor

    Out of stock

    $199.99$134.39

  • Sale -33% TRIDM30, Drag Master 3.0T Holeshot Brushless Motor

    Trinity TRIDM30, Drag Master 3.0T Holeshot Brushless Motor

    Out of stock

    TRIDM30, Drag Master 3.0T Holeshot Brushless Motor

    Out of stock

    $199.99$134.39

  • Sale -33% TRIDM25, Drag Master 2.5T Holeshot Brushless Motor

    Trinity TRIDM25, Drag Master 2.5T Holeshot Brushless Motor

    Out of stock

    TRIDM25, Drag Master 2.5T Holeshot Brushless Motor Designed for all out power and speed needed for Extreme - Drag Racing, Pan Cars & Touring CarsStandard Race SPEC Features:Aluminum based sensor board for true sensor alignmentInfinite Timing Adjustment2mm Copper TabsThicker Pure Copper Solder Tabs and CollectorThermal Stator Coating for the best heat dissipation possibleTurbine style vented noseMore Vents for More Cooling220C wire coatingCertified Gauge High Temperature WireShort Stack Stator DesignStator MaterialGrade 5 Ball BearingsUses all D3.5, D4 and 24K Rotors10,000Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number.* MAX Voltage 11.1v 3 Cell Lipo Battery

    Out of stock

    $199.99$134.39

  • TRIDM20, Drag Master 2.0T Holeshot Brushless Motor

    Trinity TRIDM20, Drag Master 2.0T Holeshot Brushless Motor

    1 in stock

    TRIDM20, Drag Master 2.0T Holeshot Brushless Motor Designed for all out power and speed needed for Extreme - Drag Racing, Pan Cars & Touring CarsStandard Race SPEC Features:Aluminum based sensor board for true sensor alignmentInfinite Timing Adjustment2mm Copper TabsThicker Pure Copper Solder Tabs and CollectorThermal Stator Coating for the best heat dissipation possibleTurbine style vented noseMore Vents for More Cooling220C wire coatingCertified Gauge High Temperature WireShort Stack Stator DesignStator MaterialGrade 5 Ball BearingsUses all D3.5, D4 and 24K Rotors10,000+Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number.* MAX Voltage 11.1v 3 Cell Lipo Battery

    1 in stock

    $199.99

  • TRIPUN1001, Punisher 13.5 Turn Spec Class Sensored Brushless Motor

    Trinity TRIPUN1001, Punisher 13.5 Turn Spec Class Sensored Brushless Motor

    Out of stock

    TRIPUN1001, Punisher 13.5 Turn Spec Class Sensored Brushless Motor Features: Infinite Timing Adjustment True Zero Point Updated Sensor Board Design Open Bearing On Sensor End For Easy Cleaning and Oiling Lower Resistance Solder Tabs Maximized Can Cooling Vents

    Out of stock

    $99.99

  • TRITEP2111, Double Down 6500KV 4 Pole Drag Motor

    Trinity TRITEP2111, Double Down 6500KV 4 Pole Drag Motor

    1 in stock

    Drag racing has proven to be one of the most demanding disciplines in the RC industry. With how powerful the cars are, some manufacturers are struggling to keep up with the demand of new parts and releases. Luckily for you, we at Team Trinity are staying at the forefront! Don't let that make you think they are rushing out products like their competitors though, with months of testing under their belts they are proud to bring the Double Down 4 Pole Drag Motor to market!The Double Down 4 Pole is a special design for drag racing. On each side of the stator are Gold and Black CNC endplates that not only look incredible but offer tons of space for airflow to get through. This design also allows for long, full length, screws that will keep the motor together even at the highest of vibrations. The stator uses a thermal epoxy to stay cool as well as strong. All this houses a rotor with special metal jacket for protection in the hardest of environments and an 1/8in shaft. The Double Down also uses their 90 degree solder tabs for easy soldering! When looking at the tabs you'll also notice that their 4-pole has adjustable timing options! Chances are if you're not running a Double Down, you're chasing one! Features:   90 degree solder tabs 2pc CNC Machined Aluminum can allows for more accurate deviation readings X-Flow Cooling which pulls more air through the can, reducing motor temps Adjustable timing capabilities Modular Design with whole-can length hardware and replaceable end caps Reformulated thermal Epoxy for best in class thermal dissipation  

    1 in stock

    $159.99

  • TRITEP2021, Slot Machine 13.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Trinity TRITEP2021, Slot Machine 13.5T Race Spec Brushless Motor w/TEP1119 Rotor

    Out of stock

    After months of hard work and testing we are proud to show off the all new Slot Machine. They say that you should never forget where you come from. Here at Team Trinity we always like to take a good trip down memory lane to never forget where we came from. With that said, we are happy to bring back the Slot Machine name with our newest spec motor!The Slot Machine picks up exactly where the X-Factor left off but goes a few steps further. The Slot Machine has a brand new, ground up, stator design that was designed with speed, durability, and efficiency all in mind. Both ends feature CNC machined end plates not only for looks, but functionality as well. With tons of space for heat to escape, you can be confident that your Slot Machine is staying cool in even the hottest of conditions. Having an open stator design not only helps with heat, but also allows for the use of long screws. The long screws go through both end plates as well as the new stator with new, reformulated, epoxy specially designed for strength as well as heat dissipation. Both durability and efficiency all in one! Not only that but, all new 90 degree solder tabs make soldering up your brand new Slot Machine a breeze! Features: New 90 degree solder tabs 2pc CNC Machined Aluminum can allows for more accurate deviation readings X-Flow Cooling which pulls more air through the can, reducing motor temps Infinite timing adjustment capabilities Modular Design with whole-can length hardware and replaceable end caps All new stator design with an immense amount of low end torque without skimping on efficiency

    Out of stock

    $109.99

  • TRIPUN1000, Punisher 10.5 Turn Spec Class Brushless Motor

    Trinity TRIPUN1000, Punisher 10.5 Turn Spec Class Brushless Motor

    Out of stock

    TRIPUN1000, Punisher 10.5 Turn Spec Class Brushless Motor Features: Infinite Timing Adjustment True Zero Point Updated Sensor Board Design Open Bearing On Sensor End For Easy Cleaning and Oiling Lower Resistance Solder Tabs Maximized Can Cooling Vents

    Out of stock

    $99.99

  • TRIREV1114, X Factor 5.0T Modified Sensored Brushless Motor

    Trinity TRIREV1114, X Factor 5.0T Modified Sensored Brushless Motor

    Out of stock

    TRIREV1114, X Factor 5.0T Modified Sensored Brushless Motor Features: 10% Lighter than Previous Motors Weight (158g avg) New Sensor Board Design. 0 - 60 Degrees of Timing adjustment Revolutionary timing ring & locking end plate systems saves weight Only 6 short screws X-Flow Cooling which pulls more air through the can, reducing motor temps 2pc CNC Machined Aluminum can allows for more accurate deviation reading NEW 90 Degree Solder Tabs The X-Factor Modified Series come assembled with TEP1151 Rotor.

    Out of stock

    $149.99

  • Sale -33% TRIDM40, Drag Master 4.0T Holeshot Brushless Motor

    Trinity TRIDM40, Drag Master 4.0T Holeshot Brushless Motor

    Out of stock

    TRIDM40, Drag Master 4.0T Holeshot Brushless Motor Designed for all out power and speed needed for Extreme - Drag Racing, Pan Cars & Touring Cars Standard Race SPEC Features: Aluminum based sensor board for true sensor alignment Infinite Timing Adjustment 2mm Copper Tabs Thicker Pure Copper Solder Tabs and Collector Thermal Stator Coating for the best heat dissipation possible Turbine style vented nose More Vents for More Cooling 220C wire coating Certified Gauge High Temperature Wire Short Stack Stator Design Stator Material Grade 5 Ball Bearings Uses all D3.5, D4 and 24K Rotors 8150Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in KV's due to the fact that timing and voltage can effect the KV number. * MAX Voltage 11.1v 3 Cell Lipo Battery

    Out of stock

    $199.99$134.39

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account