Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

RC4WD R/C Vehicles

2 products


  • RC4VVJD00034, 1/14 8X8 Tonnage Heavy Haul Truck (FMX)

    RC4WD RC4VVJD00034, 1/14 8X8 Tonnage Heavy Haul Truck (FMX)

    Out of stock

    Product Details Features Hard Plastic European Style Front Cab Full Metal 2 Speed Transmission (Planetary Gears) Transfer Case (Billet Aluminum) Scale Fuel Tank (Billet Aluminum) Super Scale Leaf Spring Suspension Setup Scale Wheels (Billet Aluminum) Remote Lockable Rear Axle (Locking Differential) Full Metal Front and Rear Axle Housing Steel Scale Drive Shaft Realistic Front Cab Latch Retractable Steel Ladder Realistic Front Cab Latch Retractable Steel Ladder Molded Functional Fuel Tank Rear Light Guard (Protects Against Rocks) Scale Light Buckets (Fits 3-5mm LED) Maximum Mass Load: 176lbs / 80kg Brushed Electric Motor Basic 6 Channel 2.4Ghz Radio Professionally Pre-assembled Manufactured by JDCustoms 30 Days Limited Warranty Needed to Complete LiPo Battery: RC4WD Z-S1718 Earth Digger/Earth Mover 3S 11.1V 25C 6500mAh with XT60 Connector AA Batteries: Four for transmitter What's in the Box? (1) RC4WD 1/14 Scale Electric Powered Assembled 8x8 Tonnage Heavy Haul Truck (FMX) Hard Plastic European Style Front Cab Realistic Front Cab Latch Scale Wheels (Billet Aluminum) and King of the Road 1.7" (43.18mm) inner diameter, hard rubber semi truck compound tires. Rear Light Guard (Protects Against Rocks) Scale Fuel Tank (Billet Aluminum) and Molded Functional Fuel Tank Retractable Steel Ladder Notes Must turn on the transmitter before starting the ESC ESC Supports XT60 Connector. The ESC does not have lipo cut off. While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply thread lock to some of the hardware. Use good quality hex drivers to avoid stripping screw heads. Use thread lock when putting metal screws into metal parts. Do not over-tighten screws, or you may strip the thread. Do not use larger than 3S battery. (11.1 volt(s)). This product is for experienced R/C users. Not recommended for beginners. The axle hubs can be removed, but may require additional force. Speaker included, but sound unit sold separate. Product Specifications Approximate Assembly Time No assembly required Ball Bearings Full set Battery Tray Dimensions 6.01 x 1.87 x 1.4" (153 x 47.5 x 35.5mm) Body Hard plastic European style front cab Charger Sold Separately Completion Level Ready-To-Run Differential Remote lockable rear axle (locking diff) Drivetrain 8WD Power Type Electric Internal Gear Ratio 2.6:1 Motor Type Brushed Outer Diameter 3.42 in (87mm) Product Height 10.9" (278mm) Product Length 26.3" (669mm) Product Weight 17.8lbs (8.1kg) Product Width 9.05" (230mm) Radio Included Receiver Included Scale 1/14 Speed Control Included Suspension Super scale leaf spring Tire Compound Hard rubber semi truck compound Tire Tread Hard Rubber Vehicle Type Semi Tractor Water-Resistant Yes Wheel Type Billet aluminum

    Out of stock

    $2,885.57$2,345.99

  • Z-RTR0049, RC4WD Trail Finder 2 RTR w/ 1985 Toyota 4Runner Hard Body Set (Limited Edition) Z-RTR0049, RC4WD Trail Finder 2 RTR w/ 1985 Toyota 4Runner Hard Body Set (Limited Edition)

    RC4WD Z-RTR0049, RC4WD Trail Finder 2 RTR w/ 1985 Toyota 4Runner Hard Body Set (Limited Edition)

    Out of stock

    Product Details Key Features R3 Single Speed Aluminum Transmission Twister High Torque Metal Gear Digital Servo Stamped Steel 1.7" Beadlock Wagon Wheels (Chrome) Falken Wildpeak M/T 1.7" Tires Outcry III Waterproof ESC In The Box (1) 1x RC4WD Trail Finder 2 RTR w/ 1985 Toyota 4Runner Hard Body Set (Limited Edition) (1) Product Manual Introduction Introducing the officially licensed 4Runner body as a Trail Finder 2 RTR! This 4Runner can take on any trail with its beefy, Falken Wildpeak M/T 1.7" scale tires mounted on the shiny OEM 6-Lug Stamped Steel 1.7" wheels. Our 4Runner RTR has both scaled detailed styling and aggressive performance. Keeping the 4Runner moving along the trails is it's R3 Single Speed Transmission, 540 Crawler Brushed Motor, RC4WD Ultimate Scale Shocks, and Outcry III Waterproof ESC to ensure a smooth ride. Add a custom, personalized touch to your TF2 4Runner RTR with our wide array of upgrades and accessories from some of the hottest aftermarket off-road brands like ARB 4x4 Accessories, WARN Industries, KC HiLiTES and so much more! Features Custom designed for true to scale looks Realistic billet aluminum ladder frame chassis R3 single speed transmission Center mounted realistic hammer transfer case Yota II ultimate scale cast axles Twister high torque metal gear digital servo RC4WD ultimate scale shocks OEM stamped steel 1.7" beadlock wheels (chrome) Falken wildpeak m/t 1.7" scale tires 540 crawler brushed motor 45t Outcry III waterproof esc Drivetrain The R3 Single Speed Transmission comes with a tough cast metal case and wider gears to allow for more abuse along with a Delrin Spur with Slipper Clutch. It also features a sturdy billet aluminum motor mount for durability. The 4Runner RTR includes the Hammer Transfer Case. Packed with detail, the Hammer features a cast metal exterior and heavy duty .8 Mod widened gears for durability. Drawing on the success of the RC4WD MOA gear sets, the TF2 RTR Drivetrain has the most durable gears RC4WD has to offer so the 4Runner RTR will stay on the trail, day after day. The most scale accurate axles on the market, the RC4WD Yota II Ultimate Scale Cast Axles feature innovative 8 degree round knuckles, unique removable diff covers, lower mounting points and a compact offset pumpkin in the front. The Punisher Shafts for the TF2 feature bulletproof steel universals and a high quality plastic shaft for great driveline angles and durability on the trail. Suspension The 4Runner RTR Chassis features a molded fuel cell that doubles as an electronics storage box plus an aluminum frame mounted under cab electronics tray for multiple electronics mounting options. The 4Runner RTR includes a set of RC4WD Ultimate Scale Shocks. Designed with scale looks and ultimate performance. The shocks are machined from billet aluminum and internally sprung. The 4Runner RTR Chassis is a machined billet aluminum ladder frame design with leaf springs, scale shock hoops, chassis servo mounts and hard body mounts. 4-link conversion available! The 4Runner RTR includes a set of OEM 6-Lug Stamped Steel 1.7" Beadlock Wagon Wheels (Chrome). These are a stamped steel construction with a clear coat finish. Every off-road truck needs a tough set of tires, and the 4Runner RTR comes equipped with Falken Wildpeak M/T 1.7" Scale Tires in an X2S3 compound to deliver the traction needed to get you through the roughest terrain. Details The 4Runner RTR has an awesome assortment of scale details including mirrors, door handles, vents and a grill to match the 1:1 real vehicle. The 4Runner Body Set features a plethora of scale characteristics including opening doors, a removable top, and an ultra detailed Yota 22RE Engine Bay. Comprised of over 20 parts, the 4Runner Body interior comes in durable, molded hard plastic that is professionally painted to match a full scale vehicle. The vents, steering wheel, shift knobs and door handles are all present to show the realism. The 4Runner has a complete molded plastic engine bay that comes painted and fully decaled for an extremely scale appearance. The interior of the 4Runner is complete with LED light buckets, and an operational tailgate. The interior is painted to match the exterior. Electronics The 4Runner RTR includes a quality XR3 3 channel 2.4Ghz radio system. Use the third channel to control a winch and add even more fun to your scale adventure! The 4Runner RTR is powered by the nearly indestructible RC4WD 45 Turn Crawler Motor. With its sealed endbell for increased durability and long lasting performance, you’re sure to get where you’re going. The 4Runner RTR features the popular RC4WD Outcry III Waterproof ESC Brushed Speed Controller with built-in drag brake for reliable, constant power on demand. Anytime. A great truck needs a great servo to get you out of those tough spots and the 4Runner RTR features the Twister. A high torque metal gear digital servo to handle all your steering duties. Featuring a massive 277.6oz@6V of torque and a full metal geared drivetrain, the RC4WD Twister Metal Gear Digital Servo has the power and performance you need when the turning gets tough. Product Specifications Completion Level Ready-To-Run Power Type Electric Ground Clearance 59.8mm (2.36") Internal Gear Ratio 1.78:1 Motor Type Brushed Product Height 8.9" (226 mm) Product Width 8.07" (205 mm) Radio Included Receiver Included Servos Included Speed Control Included Vehicle Type Rock Crawler Water-Resistant Yes Wheelbase 11.3" (287 mm)

    Out of stock

    $701.09$569.99

© 2023 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account