R/C Parts & Accessories
Futaba R304SB-E, Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver (EP Only)
R304SB-E, Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver (EP Only) The Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver is only compatible with Futaba T-FHSS telemetry compatible transmitters. The R304SB-E is very similar to the R304SB (FUTL7680) in that they both feature 4-channels, both feature S.Bus2, both are Telemetry enabled and both cost roughly the same price. However, the two receivers differ in two fundamental areas: this R304SB-E is only intended for electric vehicles and features the benefit of having a non-exposed built-in antenna. The R304SB is compatible with electric/nitro/gas applications and the antenna is fully exposed. NOTE: The R304SB-E receiver is recommended for electric powered models only. This is NOT recommended for use with nitro or gas powered models. Not compatible with the Futaba FHSS, S-FHSS, FASSTest or FASST transmitters. Features: T-FHSS System Telemetry Enabled 4-Channels Built-in Hidden Antenna Electric Vehicle Use Only Specifications: Futaba System: T-FHSS S.Bus2: Yes Channels: 4 Range: 70m (230ft) (at best conditions) Power Requirement Rated Voltage: 4.8-7.4V Usable Voltage: 3.5-8.4V Size: 1.38x0.91x0.33" (35.1x23.2x12.5mm) Weight: 0.23oz (6.7g) Number of Ports: 5 PWM Output: 4 SBUS Ports: 0 SBUS2 Ports: 1 FASST: No Telemetry: Yes (T-FHSS) S-FHSS: No High Speed: Yes High Voltage: Yes Connector: J (STND) Range: Only for Electric Powered Car Models NOTE: The R304SB-E receiver is recommended for electric powered models only. This is NOT compatible with nitro or gas powered models. Not compatible with the Futaba S-FHSS, FHSS, FASSTest or FASST transmitters. This product was added to our catalog on May 4, 2021
$69.99
Futaba FUT01004347-3, Futaba 3PV 3-Channel 2.4GHz FHSS/S-FHSS Radio System w/R304SB Receiver
FUT01004347-3, Futaba 3PV 3-Channel 2.4GHz FHSS/S-FHSS Radio System w/R304SB Receiver The Futaba 3PV Radio System is sophisticated, powerful and easy to use. Pick up the 3PV and instantly feel how lightweight it is. Once you access the programming menu on the easy-to-read screen, you will instantly recognize how sophisticated the programming is. But the real experience happens when you get to take advantage of the 3PV's super-fast response rate. This is a system that can make a difference on race day. You also get FHSS, S-FHSS and T-FHSS protocols, making it one of R/C's most versatile surface system. This version of the 3PV with R304SB telemetry receiver (FUTK3200) is for those that want to keep an eye on their receiver voltage. But the 3PV is also available with a high-voltage R203GF receiver (FUTK3201) that is perfect for brushless ESCs and digital servos. Features: FHSS/S-FHSS/T-FHSS* protocols 10-model memory Model Reset Model Name (4-Character) Low Battery Alarm Link Mode (T-FHSS only) DT3 Selection SW1 Steering Trim Throttle Trim Channel 4 Trim Sub Trim Steering Dual Rates Steering End Point Adjustment spacer Throttle End Point Adjustment Channel 3 End Point Adjustment Channel 4 End Point Adjustment 4WS/Brake Mixing Steering Servo Reversing Throttle Servo Reversing Channel 3 Servo Reversing Channel 4 Servo Reversing Steering Exponential Throttle Exponential Throttle Fail Safe ABS Function Model Data Copy Auto Power-Off after 10 minutes *NOTE: T-FHSS available only with R304SB receiver. Specifications: 3PV Transmitter: Type: 3-Channel FHSS/S-FHSS/T-FHSS* Includes: 3-Channel R304SB Receiver Requires: (4) "AA" alkaline batteries, or 6.6V 1900mAh LiFe battery (HCAM6521), or 6V NiMH Battery (FUTM1482) R304SB Receiver: Type: 3-Channel FHSS/S-FHSS/T-FHSS Input Power: 4.8V-7.4V Dimensions: 1.38 x 0.91 x 0.33 in (35.1 x 23.2 x 8.5 mm) Weight: 0.23 oz (6.6 g) This product was added to our catalog on July 14, 2021
$179.99
Futaba Futaba, R334SBS, (SR/T-FHSS/S.Bus2)
R334SBS – Super Response T-FHSS Telemetry 4-Channel ReceiverHigh Speed Response System For Surface Models (01102246-3) T-FHSS SRSIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:DC 3.7V-7.4V COMPATIBLE WITH THE T-FHSS/T-FHSS SYSTEM TRANSMITTERS.WHEN USING THE T-FHSS SR MODE, USE AN SR MODE SERVO. NORMAL SERVOS CANNOT BE USED. THE USE OF NORMAL SERVOS MAY CAUSE SERVO TROUBLE.
$99.99
Futaba FUT01004416-3, Futaba 4PM Plus 4-Channel 2.4GHz T-FHSS Radio System w/R304SB Receiver
FUT01004416-3, Futaba 4PM Plus 4-Channel 2.4GHz T-FHSS Radio System w/R304SB Receiver The Futaba 4PM Plus 4-Channel 2.4GHz T-FHSS Radio System brings great advancements to the 4PM platform. This combo includes an R304SB receiver. Features: T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS: In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry functions. *R304SB and R304SB-E are not compatible with SR system. T-FHSS MINIZ SYSTEM: By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated receiver RA-42 requires purchase separately. 01004397-3 comes with no receiver. FHSS MINIZ SYSTEM: By changing to the MI-FH system in the receiver setting menu, you can use Kyosho Mini – Z FH FS-RM005 module to connect to the non-Evo Mini-z. TELEMETRY SYSTEM: The T4PM+ transmitter has adopted the newly developed bidirectional communication system “T-FHSS”. 2.4GHz SS RADIO COMMUNICATION SYSTEM: Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes interference from other 2.4 GHz systems. MODEL MEMORY FOR 40 MODELS: Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created using the model copy function. 4 AXIS JOG BUTTON: The (JOG) button can be operated in 4 directions: up, down, left, and right. ESC-LINK FUNCTION (MC-LINK): This dedicated function allows you to set up the Link software so that your T4PM can control the variable frequency and other data changes in Futaba speed controllers (ESCs): MC970CR, MC850C, MC851C, MC602C, MC402CR, etc. S.BUS SERVO: This is a special function that allows the setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E. STEERING MIXING: Smooth cornering is possible by the independent left and right steering servo settings. BRAKE MIXING FOR LARGE CARS (BRAKE): Brake mixing of the front and rear wheels of 1/5 gas power cars and other large cars can be adjusted independently. GYRO MIXING (GYRO MIX): The sensitivity of Futaba car rate gyros can be adjusted from the T4PM. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS): This function can be used with crawlers and other 4WS-type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC): ESCs at the front and rear are controlled independently. CPS-1 MIXING (CPS MIX): LED lighting and flashing control using our CPS-1 channel power switch can only be matched to steering and throttle operation by a switch. ANTI-SKID BRAKING SYSTEM (TH A.B.S): This function applies the brakes so that the tires of gas-powered cars do not lose their grip on the road even when braking at corners. THROTTLE ACCELERATION (ACCEL): Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag. THROTTLE SPEED (SPEED): Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, the operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED (SPEED): When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. RACING TIMER (TIMER): The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling times are indicated by an audible alarm. An up timer is also provided. FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL): This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. TRIGGER POSITION CAN BE CHANGED: The position of the throttle trigger can be moved forward and backward. TENSION ADJUSTMENT FUNCTION: The tension of the steering wheel and throttle trigger springs can be adjusted from the outside. MECHANICAL ATL ADJUSTMENT: Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger. Specifications: Transmitter: Voltage: 4.5-6.6V Communication Method: Bidirectional protocol Maximum Range: 100m (Except the MINIT system) (Optimum condition) Frequency: 2.4GHz RF Power Output: 100mW EIRP Current Drain: 150 mA or less Transmission Antenna: 1/2(Lambda) di-pole Receiver: Dimensions: 35.1x23.2x8.5mm Voltage: 4.0-8.4V Weight: 6.6g Includes: (1) Futaba 4PM+ Transmitter (1) Dry Battery Holder (1) R304SB receiver (1) Mini Screwdriver Needed to Complete: (3) AA Batteries or (1) 6.6V LiFe Battery This product was added to our catalog on November 25, 2022
$299.99
Futaba R334SBS-E, Futaba T-FHSS SR S.Bus2 4-Channel 2.4GHz Receiver (Electric Models Only)
R334SBS-E,Futaba T-FHSS SR S.Bus2 4-Channel 2.4GHz Receiver (Electric Models Only) Futaba R334SBS-E T-FHSS SR S.Bus2 4-Channel 2.4GHz Receiver. This receiver is recommended for electric models only. NOTE: This receiver is not compatible with gas powered models. Gas powered models should use the R334SBS receiver (FUTL7688). SR mode servos must be used when using T-FHSS SR mode. Use of normal servos may cause servo trouble. Not compatible with the Futaba FHSS, S-FHSS, FASSTest or FASST transmitters. Features: Surface 4ch 2.4GHz T-FHSS SR Diversity 2.4GHz T-FHSS S.BUS2 Frequency 2.4GHz Surface Use 4 Channel Specifications: Input voltage: 4.8-7.4V Weight: 7.2g Dimensions: 33.9×22.3×11.3mm (3 × 2.5 × 1.5 in) This product was added to our catalog on May17, 2023
$99.99
Futaba 7PXR US Limited Edition - R334SBS (01004407-3)
7PXR US Limited Edition Transmitter – Super Response Digital Proportional RC System For Use with Surface Models (01004407-3) (01004406-3) FEATURES FULL COLOR TOUCH SCREEN LCD:T7PXR has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility. T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. (SR system does not support telemetry function.) UPDATEABLE SOFTWARE:Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved. MODEL MEMORY FOR 40 MODELS:Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. NFC COMMUNICATION:It is possible to update the T7PXR itself in the future by NFC communication. INTEGRAL TYPE DIAL SWITCH:A switch with both dial (DL1) and pus switch (PS6) functions. BRAKE MIXING FOR LARGE CARS:Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently. STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE:This function can be used with crawlers and other 4WS type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS:ESCs at the front and rear are controlled independently. GYRO MIXING:The sensitivity of Futaba car rate gyros can be adjusted from the T7PXR. TANK MIXING:This function is intended for vehicles such as tanks. CPS-1 MIXING:LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. MC-LINK:This dedicated function allows you set up the Link software so that your T7PXR can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. THROTTLE SPEED:Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED :When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. NON-TELEMETRY LED:When the telemetry function is OFF to confirm that the telemetry function is not operating. DIAL SELECT FUNCTION:This function assigns functions to dials (digital trim, drip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. SWITCH SELECT FUNCTION:This function assigns functions to 5 switches. The operating directions can also be set. WHEEL AND TRIGGER POSITION CAN BE CHANGED:The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward. TRIGGER BRAKE LEVER REPLACEMENT:The trigger brake lever is selected from a narrow nylon type and wide type. TRIM/DIAL LOCK FUNCTIONS:Lock functions which prohibit setting and operating by transmitter trim, and dials are provided. LEFT-HANDED SUPPORT:The left and right installation direction of the wheel section can be reversed. VIBRATOR BUILT INTO THE GRIP:The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen. CONTENTS YOUR T7PXR INCLUDES THE FOLLOWING COMPONENTS: -T7PXR Transmitter -R334SBS OR R334SBS-E Receiver -Dry Battery Holder -Wheel Offset Adapter -Wheel Adapter 32deg -Large Diameter Steering Wheel (54 mm) -Trigger Brake Lever (Narrow Type) -Miniature Screwdriver -Screen Protector -3 x Receiver Plugs TRANSMITTER SPECS WHEEL SYSTEM, 7 CHANNELS (S-FHSS SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS, FASST SYSTEM TRANSMITTING FREQUENCIES:2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP PROTOCOLS:T-FHSS SR/T-FHSS/S-FHSS/FASST-C2 POWER REQUIREMENT:Ni-MH – NT5F1800B (6 V)LiFe – FT2F1700BV2 (6.6 V) CURRENT DRAIN:350 mA or less (When the T-FHSS, Vibration off, back lighting on) TRANSMITTING ANTENNA:1/2λ dipole 4.3 INCH BACKLIGHTED COLOR TFT LIQUID CRYSTAL TOUCH PANEL**When you turn on your 7PXR, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology. RECEIVER SPECS R334SBS T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:DC 3.7V-7.4V R334SBS-E T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.2 g0.25 oz OPERATING VOLTAGE:DC 3.7V-7.4V
$699.99
Futaba HPS-CT700– S.Bus2 High-Voltage Low-Profile Surface Servo
HPS-CT700– S.Bus2 High-Voltage Low-Profile Surface Servo High Performance Servo with Brushless Motor (01102321-3) FEATURES:– Suitable for RC cars 1/10 scale on/off road and drifting.– Programmable/HV Brushless Servo.– Custom New high power Brushless Motor.– Supports SR mode with T7PX.– Programmable and compatible with S.Bus and S.Bus2 systems.– Can be connected to a PC using the CIU-2/-3 USB adapter sold separately.– Upper/middle/bottom: Aluminum Case Speed：0.07sec/60°(7.4V) ／ 0.08sec/60°(6.0V) Torque：30.0kgf・cm(7.4V) ／ 23.0kgf・cm(6.0V) Dimensions/Weight：40.5×21.0×26.2mm/54g RATED VOLTAGE:DC 6.0V-7.4V OPERATING VOLTAGE:DC 4.8-8.4V ONLY FOR RC CARS SMALLER THAN 1/5 SCALE
$259.99
Futaba 7PXR - R334SBS (#01004395-3) - Transmitter Systems, Surface Systems
7PXR Transmitter – Super Response Digital Proportional RC System For Use with Surface Models (01004395-3) (01004396-3) FEATURES FULL COLOR TOUCH SCREEN LCD:T7PXR has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility. T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. (SR system does not support telemetry function.) UPDATEABLE SOFTWARE:Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved. MODEL MEMORY FOR 40 MODELS:Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. NFC COMMUNICATION:It is possible to update the T7PXR itself in the future by NFC communication. INTEGRAL TYPE DIAL SWITCH:A switch with both dial (DL1) and pus switch (PS6) functions. BRAKE MIXING FOR LARGE CARS:Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently. STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE:This function can be used with crawlers and other 4WS type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS:ESCs at the front and rear are controlled independently. GYRO MIXING:The sensitivity of Futaba car rate gyros can be adjusted from the T7PXR. TANK MIXING:This function is intended for vehicles such as tanks. CPS-1 MIXING:LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. MC-LINK:This dedicated function allows you set up the Link software so that your T7PXR can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. THROTTLE SPEED:Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED :When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. NON-TELEMETRY LED:When the telemetry function is OFF to confirm that the telemetry function is not operating. DIAL SELECT FUNCTION:This function assigns functions to dials (digital trim, drip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. SWITCH SELECT FUNCTION:This function assigns functions to 5 switches. The operating directions can also be set. WHEEL AND TRIGGER POSITION CAN BE CHANGED:The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward. TRIGGER BRAKE LEVER REPLACEMENT:The trigger brake lever is selected from a narrow nylon type and wide type. TRIM/DIAL LOCK FUNCTIONS:Lock functions which prohibit setting and operating by transmitter trim, and dials are provided. LEFT-HANDED SUPPORT:The left and right installation direction of the wheel section can be reversed. VIBRATOR BUILT INTO THE GRIP:The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm. It sets it on each function screen. CONTENTS YOUR T7PXR INCLUDES THE FOLLOWING COMPONENTS: -T7PXR Transmitter -R334SBS OR R334SBS-E Receiver -Dry Battery Holder -Wheel Offset Adapter -Wheel Adapter 32deg -Large Diameter Steering Wheel (54 mm) -Trigger Brake Lever (Narrow Type) -Miniature Screwdriver -Screen Protector -3 x Receiver Plugs TRANSMITTER SPECS WHEEL SYSTEM, 7 CHANNELS (S-FHSS SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS, FASST SYSTEM TRANSMITTING FREQUENCIES:2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP PROTOCOLS:T-FHSS SR/T-FHSS/S-FHSS/FASST-C2 POWER REQUIREMENT:Ni-MH – NT5F1800B (6 V)LiFe – FT2F1700BV2 (6.6 V) CURRENT DRAIN:350 mA or less (When the T-FHSS, Vibration off, back lighting on) TRANSMITTING ANTENNA:1/2λ dipole 4.3 INCH BACKLIGHTED COLOR TFT LIQUID CRYSTAL TOUCH PANEL**When you turn on your 7PXR, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology. RECEIVER SPECS R334SBS T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:DC 3.7V-7.4V R334SBS-E T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.2 g0.25 oz OPERATING VOLTAGE:DC 3.7V-7.4V
$699.99
Futaba UBA0135, 2100 mAh LiFe Transmitter Battery (2-Cell)
UBA0135, 2100 mAh LiFe Transmitter Battery (2-Cell)
$89.99
Futaba Futaba, 4PM (#01004387-3) - Transmitter Systems, Surface Systems
Futaba 4PM 4-Channel 2.4GHz T-FHSS Radio System w/R334SBS Receiver Futaba R334SBS TFHSS SR S.Bus2 HV 4-Channel 2.4GHz Receiver DESCRIPTION 4PM Transmitter – Super Response Digital Proportional RC System For Use with Surface Models (01004387-3) (01004388-3) (01004397-3) FEATURES T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry function. *R304SB and R304SB-E are not compatible with SR system. T-FHSS MINIZ SYSTEM:By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated receiver RA-42 requires purchase separately. 01004397-3 comes with no receiver. TELEMETRY SYSTEM:The T4PM transmitter has adopted the newly developed bidirectional communication system “T-FHSS”. 2.4 GHZ SS RADIO COMMUNICATION SYSTEM:Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes the interference from other 2.4 GHz systems. MODEL MEMORY FOR 40 MODELS:Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function. 4 AXIS JOG BUTTON:The (JOG) button can be operated in 4 directions: up, down, left, and right. ESC-LINK FUNCTION (MC-LINK):This dedicated function allows you set up the Link software so that your T4PM can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. S.BUS SERVO:This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E. STEERING MIXING:Smooth cornering is possible by independent left and right steering servo setting. BRAKE MIXING FOR LARGE CARS (BRAKE):Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently. GYRO MIXING (GYRO MIX):The sensitivity of Futaba car rate gyros can be adjusted from the T4PM. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS):This function can be used with crawlers and other 4WS type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC):ESCs at the front and rear are controlled independently. CPS-1 MIXING (CPS MIX):LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only. ANTI-SKID BRAKING SYSTEM (TH A.B.S):This function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners. THROTTLE ACCELERATION (ACCEL):Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag. THROTTLE SPEED (SPEED):Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED (SPEED):When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. RACING TIMER (TIMER):The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided. FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL):This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. TRIGGER POSITION CAN BE CHANGED:The position of the throttle trigger can be moved forward and backward. TENSION ADJUSTMENT FUNCTION:The tension of the steering wheel and throttle trigger springs can be adjusted from the outside. MECHANICAL ATL ADJUSTMENT:Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger. CONTENTS YOUR T4PM INCLUDES THE FOLLOWING COMPONENTS: -T4PM Transmitter -R304SB OR R334SBS OR NO receiver -Dry Battery Holder -Mini Screwdriver TRANSMITTER SPECS T-FHSS SR/T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 4 CHANNELS COMMUNICATION METHOD:One-way operating system MAXIMUM OPERATING RANGE:100m (Except the MINIT system) (Optimum condition) FOR SAFETY:F/S, B-F/S, ID TRANSMITTER FREQUENCY:2.4 GHz band RF POWER OUTPUT:100mW EIRP POWER REQUIREMENT:(Dry Cell Battery) Penlight x 3 (4.5 V) CURRENT DRAIN:150 mA or less TRANSMISSION ANTENNA:1/2λ di-pole RECEIVER SPECS R304SB T-FHSS SIZE:35.1 mm x 23.2 mm x 8.5 mm WEIGHT:6.6 g OPERATING VOLTAGE:DC 4.8V-7.4V R334SBS T-FHSS SR SIZE:33.9 mm x 22.3 mm x 11.3 mm1.33 in x 0.88 in x 0.44 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:DC 3.7V-7.4V
$239.99
Futaba FUT01004361-3, Futaba 4YF 2.4GHz FHSS 4 Channel Radio System (Airplane) w/R2004GF Receiver
FUT01004361-3, Futaba 4YF 2.4GHz FHSS 4 Channel Radio System (Airplane) w/R2004GF Receiver This is the Futaba 4YF 2.4GHz FHSS 4-Channel Airplane Radio System, with an included R2004GF 4-Channel Receiver. Futaba quality, FHSS technology and an economical price make the 4YF 2.4GHz FHSS radio an excellent choice for cost-conscious modelers wanting an interference-free spread spectrum system for sport flying. The 4YF has always been a great value, and now Futaba has enhanced it with cutting-edge 2.4GHz performance and security! 2.4GHz FHSS TechnologyFrequency-hopping 2.4GHz FHSS technology results in a radio system that's as cutting-edge as it is easy to use! R2004GF ReceiverThe R2004GF receiver is compatible only with electronics created specifically for 2.4GHz FHSS systems. Features: Frequency Hopping Spread Spectrum (FHSS) eliminates signal interference and frequency pins The included R2004GF receiver features a flexible coaxial antenna that can be easily positioned inside the model for optimum reception Easy, convenient push-button transmitter/receiver linking, with no binding plugs Power Down Mode - reduces RF power for 90 seconds, simplifying ground checks for interference All-channel servo reversing for more installation options Power and servo reversing switches located out of the way to prevent accidental changes Battery meter with green and red LED for instant "go/no-go" status 4YF Transmitter Specifications: Band: 2.4GHz Operating System: 2-stick, 4-channel Power Supply: 6V (4 "AA" batteries) Current Drain: 90mA R2004GF Receiver Specifications: Band: 2.4GHz Power Requirements: 4.8V or 6V (shared with servo) Current Drain: 30mA (at no signal) Size: 1.54x1.02x0.39 inches (39x26x10mm) Weight: 0.49oz (14g) This product was added to our catalog on October 17, 2023
$139.99
Futaba FUT01004414-3, Futaba 4PM Plus 4-Channel 2.4GHz T-FHSS Radio System (No Receiver)
FUT01004414-3, Futaba 4PM Plus 4-Channel 2.4GHz T-FHSS Radio System (No Receiver) Features: T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS: In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry functions. *R304SB and R304SB-E are not compatible with SR system. T-FHSS MINIZ SYSTEM: By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated receiver RA-42 requires purchase separately. 01004397-3 comes with no receiver. FHSS MINIZ SYSTEM: By changing to the MI-FH system in the receiver setting menu, you can use Kyosho Mini – Z FH FS-RM005 module to connect to the non-Evo Mini-z. TELEMETRY SYSTEM: The T4PM+ transmitter has adopted the newly developed bidirectional communication system “T-FHSS”. 2.4GHz SS RADIO COMMUNICATION SYSTEM: Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes interference from other 2.4 GHz systems. MODEL MEMORY FOR 40 MODELS: Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created using the model copy function. 4 AXIS JOG BUTTON: The (JOG) button can be operated in 4 directions: up, down, left, and right. ESC-LINK FUNCTION (MC-LINK): This dedicated function allows you to set up the Link software so that your T4PM can control the variable frequency and other data changes in Futaba speed controllers (ESCs): MC970CR, MC850C, MC851C, MC602C, MC402CR, etc. S.BUS SERVO: This is a special function that allows the setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E. STEERING MIXING: Smooth cornering is possible by the independent left and right steering servo settings. BRAKE MIXING FOR LARGE CARS (BRAKE): Brake mixing of the front and rear wheels of 1/5 gas power cars and other large cars can be adjusted independently. GYRO MIXING (GYRO MIX): The sensitivity of Futaba car rate gyros can be adjusted from the T4PM. 4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS): This function can be used with crawlers and other 4WS-type vehicles. DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC): ESCs at the front and rear are controlled independently. CPS-1 MIXING (CPS MIX): LED lighting and flashing control using our CPS-1 channel power switch can only be matched to steering and throttle operation by a switch. ANTI-SKID BRAKING SYSTEM (TH A.B.S): This function applies the brakes so that the tires of gas-powered cars do not lose their grip on the road even when braking at corners. THROTTLE ACCELERATION (ACCEL): Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag. THROTTLE SPEED (SPEED): Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, the operation can be performed smoothly and easily. It also suppresses battery consumption. STEERING SPEED (SPEED): When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted. RACING TIMER (TIMER): The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling times are indicated by an audible alarm. An up timer is also provided. FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL): This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital. TRIGGER POSITION CAN BE CHANGED: The position of the throttle trigger can be moved forward and backward. TENSION ADJUSTMENT FUNCTION: The tension of the steering wheel and throttle trigger springs can be adjusted from the outside. MECHANICAL ATL ADJUSTMENT: Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger. Specifications: Voltage: 4.5-6.6V Communication Method: Bidirectional protocol Maximum Range: 100m (Except the MINIT system) (Optimum condition) Frequency: 2.4GHz RF Power Output: 100mW EIRP Current Drain: 150 mA or less Transmission Antenna: 1/2(Lambda) di-pole Includes: (1) Futaba 4PM+ Transmitter (1) Dry Battery Holder (1) Mini Screwdriver Needed to Complete: (3) AA Batteries or (1) 6.6V LiFe Battery This product was added to our catalog on November 25, 2022
$249.99
Futaba FUT01004415-3, Futaba 4PM Plus w/R304SB-E 4-Channel 2.4GHz T-FHSS Radio System w/R304SB-E Receiver (Futaba)
FUT01004415-3 Futaba 4PM Plus w/R304SB-E 4-Channel 2.4GHz T-FHSS Radio System w/R304SB-E Receiver
$299.99
Futaba 01102289-1, Futaba, SBS-01V External Battery Voltage Sensor
01102289-1, Futaba, SBS-01V External Battery Voltage Sensor
$49.99
Futaba UBB1108, Futaba, SBS-01TE Electric Device Temperature Sensor
UBB1108, Futaba, SBS-01TE Electric Device Temperature Sensor
$44.99
Futaba 01102213-1, Futaba, SBS-01T Temperature Sensor
01102213-1, Futaba, SBS-01T Temperature Sensor
$69.99
Futaba FUT01102212-1, Futaba SBS-01RO Optical RPM Sensor
FUT01102212-1, Futaba SBS-01RO Optical RPM Sensor This is the Futaba SBS-01RO Optical RPM Sensor. Getting the performance information you want has never been easier, lighter or more convenient! This sensor plugs into the S.Bus2 slot on telemetry-enabled receivers, and transmits the data directly to FASSTest systems. Specifications: Displays: revolutions per minute. Range: 360-300,000 Weight: 0.17 oz (4.9 g) This product was added to our catalog on February 25, 2022
$49.99
Futaba UBB1138, Futaba, SBS-01RB Brushless RPM Sensor
UBB1138, Futaba, SBS-01RB Brushless RPM Sensor
$34.99
Futaba UBB1164, Futaba, SBS-01C Current/Capacity Monitoring Sensor
UBB1164, Futaba, SBS-01C Current/Capacity Monitoring Sensor
$69.99
Futaba UBB0160, Futaba, 6-Port S.Bus Terminal Box
UBB0160, Futaba, 6-Port S.Bus Terminal Box
$17.99
Futaba 01102161-1, Futaba, GYC441 All-Purpose Car Gyro
01102161-1, Futaba, GYC441 All-Purpose Car Gyro
$89.99
Futaba CIU-3-USB Interface For Communication Between Link-Supported Devices (01102291-1)
CIU-3-USB Interface For Communication Between Link-Supported Devices (01102291-1) INTERFACE:USB Rev 2.0 Compliant USB CONNECTOR:USB Series A Connector DIMENSIONS:18.2 mm x 56.5 mm x 9.0 mm0.72 in x 2.22 in x 0.35 in WEIGHT:7.5 g0.26 oz OPERATING VOLTAGE:5.0 V ± 0.2 V (USB Bus Power) OPERATING ENVIRONMENT:Temperature -10 ~ 45° C CURRENT DRAIN (AT CONNECTION, IDLE):5.8 ± 1.7 mA APPLICABLE OS:Windows 10 / 8 / 7 / Vista A PC-LINK ADAPTER (DOUBLE EXTENSION CORD K500) IS SUPPLIED WITH CIU-3
$49.99
Futaba R203GF (S-FHSS) 2.4 GHz System 3-Channel Receiver
R203GF (S-FHSS) 2.4 GHz System 3-Channel Receiver For EP Car Models (01102202-3) S-FHSS/FHSS (Auto Detection) SIZE:39 mm x 26 mm x 10 mm1.54 in x 1.02 in x 0.39 in WEIGHT:8 g0.28 oz OPERATING VOLTAGE:DC 4.8V-7.4V NOTE: FUTABA S-FHSS/FHSS SYSTEM DOES NOT WORK WITH CURRENT FUTABA FASST SYSTEM. FASST SYSTEM AND S-FHSS/FHSS SYSTEM ARE NOT COMPATIBLE WITH EACH OTHER.
$49.99
