PTK-5344, ProTek RC "Squid" Multi Connector Charge Lead
This is the "Squid" multi connector charge lead from ProTek R/C. This lead connects to your charger with standard 4mm banana plugs, and allows you to charge nearly any battery. This charge lead includes a XT60 connector, T-Style Ultra Plug connector, JST connector, Futaba connector, two different transmitter charge connectors, and even has a loop soldered in that you can cut to add two of your own specialized connectors. So if you are looking for one charge lead that does it all this is the charge lead for you.
This charge lead also includes caps for the exposed charge leads for the DC transmitter leads and T-Style plug.
This product was added to our catalog on December 16, 2021
PTK-5106-22, ProTek RC 4S 120C Low IR Si-Graphene + HV LiPo Battery (15.2V/6500mAh) w/5mm Connector (ROAR Approved)
The ProTek R/C 4S 120C Graphene + HV 6500mAh LiPo Battery is a great battery option for anyone looking for a high capacity, high output 4S battery. Weighing 578 grams, the 4S HV is lighter than a standard 4S pack, with much higher capacity. This provides more runtime, and a dramatic increase in voltage and punch over the course of a run.
This battery is designed to have improved power to weight ratios while maintaining a low CG. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 120C Packs deliver the power needed by serious racers and enthusiasts alike.
Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 120C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 120C Graphene + packs are perfect for racers and bashers that demand the absolute best.
NOTE: This battery is not recommended for high current draw 8S applications.
Features:
Lighter than a hardcase 4S LiPo pack of equal capacity
Improved power to weight ratio and a lower overall CG
More runtime, with a dramatic increase in voltage and punch
Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery
Improved efficiency, lower operating temperatures, and lower internal resistance!
Increased run time, increased cycle life and increased voltage!
More capacity gram for gram when compared to standard LiPo cells
Perfect for stock class racers looking to shave grams
10C max charge rates - 1C charge rate recommended for longest life
15.2V nominal voltage
5mm bullets and 5mm to 4mm bullet adapters included
Replacement XH4S balance adapter also available separately (PTK-5331)
NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack.
Battery Model
4S HV LiPo
ROAR Approved
Yes
Type
Silicon Graphene
Voltage
15.2V nominal
Capacity @7.4V
6150mAh
Capacity @7.6V
6500mAh
Weight
578 g
Connector Type
5mm Bullet
Balance Connector
5 pin XH
Number of Cells
4 Cell
Configuration
4S2P
Dimensions (WxLxH)
48x138x48mm
Maximum Charge Rate
10C (65A)
Burst Current
120C
Watt Hour @7.6V
98.8 Wh
Includes:
(1) ProTek R/C LiPo Battery
(2) 5mm Bullet Connectors
(2) 5mm to 4mm Reducer Bullet Connectors
(1) 4S Balance Lead
LITHIUM POLYMER SAFETY INFORMATION
IMPORTANT:
DO NOT leave the battery in your model when charging
DO NOT leave unattended when charging
LALWAYS balance charge the battery
ALWAYS use a LiPo charging bag
YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)
YOU MUST not over discharge the Li-Poly battery pack
READ & UNDERSTAND the instructions carefully before operating this battery
NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.
Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.
This product was added to our catalog on January 24, 2022
PTK-5238, ProTek RC 2S Charge/Balance Adapter (T-Style Ultra Plug to 4mm Bullet)
This is a 2S balance/charge adapter from ProTek R/C. This adapter is designed for 2S Li-Poly hard packs that use two 4mm bullet connectors for the main power connection, and a 2mm bullet connector for the balance connector. This adapter is approximately 16" long tip to tip, has bullet connectors on the battery end, a female ultra plug to attach to your charge lead, and an XH style balance connector to connect to your balancer on the other end.
This product was added to our catalog on December 16, 2021
PTK-7808, ProTek RC 4mm Aluminum Short Clamping Servo Horn (Blue) (25T)
This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances of finishing the race! Additionally, the arm is 4mm thick for durability, has 15mm and 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles.
This servo horn is an excellent upgrade for any Axial rig that uses the Axial AXI30836 servo horn, including the SCX10 II, RR10 Bomber, Wraith and Yeti vehicles. The horn is identical in size and specifications to the Axial AXI30836 servo horn, but the ProTek uses larger 2.5mm clamp screws, compared to the smaller 2mm clamp screws included with the Axial horn.
Features:
Same hole positions and overall dimensions as Axial AXI30836 servo horn! But ProTek uses larger 2.5mm clamp screws instead of the smaller 2mm clamp screws included with the Axial horn.
Clamp design
15mm and 19mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
4mm thick arm
30.5mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Orion/Savox/ProTek Output Shaft
This product was added to our catalog on December 16, 2021
PTK-211, ProTek RC "iChecker 3.0" LCD LiPo Battery Cell Checker (2-8S)
This is the ProTek R/C "iChecker 3.0" LCD Battery Checker. The "iChecker 3.0" provides you with an affordable way to monitor the condition of your batteries and allows you to easily see the total voltage, capacity, individual cell voltage, lowest & highest cell voltage, as well as the voltage difference between cells on 2S to 8S Lithium batteries with a simple tap of the buttons.
The "iChecker 3.0" is also great for monitoring the total voltage of Nickel chemistry batteries from 4 to 8 cells, testing servo operation, and testing ESC operation! With an "iChecker 3.0" in your toolbox, you'll never have to question the condition of your batteries ever again.
Features:
Monitor total voltage, capacity, individual cell voltage, lowest & highest cell voltage, and voltage difference between Lithium cells
Monitor total voltage of NiCd or NiMH batteries
Lithium balance discharging
Servo tester
ESC tester
2-8S LiPo, LiFe or Li-Ion batteries
4-8-cell NiCd or NiMH batteries
2.1" LCD screen
NOTE: This unit is compatible with 2-8S JST-EH and JST-XH battery balance connectors. Batteries that use Thunder Power/Flight Power, or Polyquest type balance connectors will require a balance adapter board and cable.
This product was added to our catalog on December 16, 2021
PTK-140T, ProTek RC 140T Low Profile High Torque Metal Gear Servo (High Voltage)
This is the ProTek R/C 140T Low Profile Digital "High Torque" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 140T High Voltage Low Profile servo delivers an impressive 185 oz-in of torque and 0.10 transit speed at 6.0V, and when you bump the voltage to 7.4V the spec's increase to 215 oz-in and 0.08 transit speed! This servo does not stop there, when cranked up to 8.4V you can see 230 oz-in and 0.07 transit speed. These specs make for an excellent choice for 1/12 or 1/10 scale RC vehicles. Other features include a plastic case with an aluminum center band for heat dissipation, a metal gear train with dual ball bearings, 160mm long 22awg connector wire and a coreless motor.
As most 1/12 or 1/10 scale vehicles come with, or require, a specific servo horn, this servo comes ready to be equipped with a servo horn of your needing (Not included). Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Features:
Low-Profile case saves space and weight
Ideal for any 1/12 to 1/10 scale vehicle application
Plastic case with aluminum center band
High voltage circuitry
0.10 transit speed, and 185 oz-in of torque @ 6.0V
0.08 transit speed, and 215 oz-in of torque @ 7.4V
0.07 transit speed, and 230 oz-in of torque @ 8.4V
Full metal gears and dual ball bearings
160mm long 22awg connector wire
Coreless motor
Servo Model
140T
Recommended Application
1/12 to 1/10 scale Surface
Operating Voltage
4.8V - 8.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.10/60° sec
Operating Speed @ 7.4V
0.08/60° sec
Operating Speed @ 8.4V
0.07/60° sec
Dynamic Torque @ 6.0V
185 oz-in (13.3 kg-cm)
Dynamic Torque @ 7.4V
215 oz-in (15.5 kg-cm)
Dynamic Torque @ 8.4V
230 oz-in (16.6 kg-cm)
Motor Type
Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
49.8g
Pulse/Frequency
1520Us / 333hz
Dimensions
39.5x30.5x20mm
This product was added to our catalog on August 18, 2021
ERC8-DC-1035, Exclusive RC Non Functional Drag Racing Parachute (Black)
The Exclusive RC Non Functional Drag Racing Parachute is an accurately scaled down replica of a 1:1 drag racing parachute. Manufactured with real chute bag material, and an included chute tag, this is a great way to finish off the back end of your street eliminator/no prep car. Available in multiple colors.
Installation requires the Exclusive RC Drag Chute Mount (not included). A variety of mounts are available to mount various body types and styles.
Specifications:Dimensions:Length: 30mmWidth: 30mmHeight: 30mm
This product was added to our catalog on February 2,2024
PTK-7819, ProTek RC Aluminum Clamping Servo Horn (Blue) (25T-ProTek)
This is replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place, increasing your chances of finishing the race! Plus, the horn has a 3.5mm thick arm for durability, with 16.5mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one blue anodized servo horn, 3x10mm button head screw, 2x7.5mm clamp screw and a star lock washer.
Features:
Clamp design
16.5mm and 20mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
3.5mm thick arm
31mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline ProTek Output Shaft
This product was added to our catalog on December 16, 2021
PTK-2107, ProTek RC Braided Brushless Motor Sensor Cable (90mm)
This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness.
The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a free moving and shock absorbing sensor cable while ensuring smooth, consistent and reliable data transfer between your ESC and motor. Choose from between 90mm and 300mm lengths.
This product was added to our catalog on December 16, 2021
PTK-5343, ProTek RC XT30 Charge Lead (Male XT30 to 4mm Banana Plugs) (6" / 15.24cm)
This is the ProTek R/C XT30 Charge Lead, featuring a male XT30 on one end connected to a serrated 4mm banana plugs with high quality 16awg silicone wire. The lead length measures 6.0 inches (15.24cm) end to end.
This product was added to our catalog on December 16, 2021
PTK-5356, ProTek RC Heavy Duty QS8 Charge Lead (Male QS8 to Female XT60)
This is the ProTek RC Heavy Duty QS8 Charge Lead, featuring a male QS8 on one end connected to XT60 with high quality 10awg silicone wire. Package includes one charge lead.
This product was added to our catalog on December 30, 2022
PTK-8000, ProTek RC P-8 1/8 Buggy Super Hauler Bag (Plastic Inner Boxes)
This is the ProTek R/C P-8 1/8 Scale Buggy Super Hauler Bag. The P-8 Super Hauler Bag has evolved, and now features a variety of improvements that make the P-8 a durable, high quality, easier to use piece of luggage. These improvements include plastic interior framing and additional velcro surfaces that secure the shelves on the sides and rear, to prevent the shelves from sagging and causing the drawers to hang up when they are being pulled out or slid into position. Protective zipper tabs have been added to the front cover to help protect the zippers during transportation, and a solid velcro strip has been added to the entire length of the lower portion of the front cover to help keep the cover secured. When the cover is rolled up there are now five velcro tabs (instead of three), that will help to prevent the cover from coming loose when its rolled up. Finally, the graphic on the front features the ProTek R/C checkered flag graphic, with a ProTek R/C logo on the rear flap.
The ProTek R/C P-8 super hauler bag was designed from the ground up for 1/8th scale buggy racers. The bag has space on top under a covered flap for storing all your tools, a place on the back for your setup board and storage compartments on the side for storing your setup equipment or other tools.
Inside the bag has three layers of drawers, with four split draws on the bottom (two each side by side above each other) and one large drawer on the top. These are the newer style Hauler Bags that have plastic inner boxes. The large drawer on the top is large enough to hold a 1/8th scale buggy with wing and wheels attached!
In addition, it is also very easy to tow the bag around the track as it features a heavy duty retractable handle and smooth trolley wheels. Also included is a carrying strap that can be moved out of the way to access tools in the top compartment, or adjusted to provide easy carrying of the bag.
Specifications:
Overall Bag Dimensions (WxHxD): 21.65x23.22x13.77"
Large Drawer Dimensions (WxHxD): 19.5x7.5x12.5"
Medium Drawer Dimensions (WxHxD): 9.5x4.5x12.5"
Small Drawer Dimensions (WxHxD): 8.5x4.5x12.5"
*Dimensions may vary slightly due to manufacturers tolerances.
This product was added to our catalog on December 16, 2022
PTK-5188, ProTek RC LiFe Futaba Transmitter Battery Pack (6.6V/2100mAh) (3PV/4PK/4PM/4PLS/4PX/4PV/7PX/7PXR/10PX/16SZ)
This is the ProTek R/C LiFe Car Transmitter Battery Pack, and is intended for use with the Futaba 3PV, 4PK, 4PM, 4PV, 4PLS, 4PX, 7PX, 10PX, 16SZ, and 18SZ Transmitters. Lithium battery technology is evolving. With cell dimensions that fit anywhere a standard Li-Po battery will and rapidly increasing capacity, LiFe chemistry will soon set the standard that all others are judged by. With the ability to deliver 1000+ usable cycles, and a life span up to 4 times longer than Li-Poly batteries (when cycled under the same discharge conditions), these batteries offer the user an excellent balance of performance and value. LiFe batteries are more durable than Li-Poly and are able to handle a higher level of abuse when compared to Li-Poly without the risk of pre-mature failure. Unlike Li-Poly, LiFe cells can be stored in a fully charged state with little to no loss in stored power, and can be discharged deeper with less risk of damage to the cells. Most importantly, LiFe batteries are SAFE! There is no risk of combustion! LiFe cells will not catch fire or explode when over charged, or after a deep discharge.
What about the voltage?
A 2 Cell LiFe battery produces 6.6 volts nominal, which is almost a full volt less than a 2 Cell LiPo battery. The LiFe battery is not meant to replace the performance of a Li-Po battery, it is simply another option. LiFe offers the user a battery with a good discharge curve that is better than that of a NiMH battery, but without the risk of damage or fire that exists when a LiPo battery is abused.
NOTE: Brand new LiFePO4 batteries have been found to fail prematurely if they are deep discharged below below 33% capacity too early. A break-in period of 20 cycles is currently recommended. While testing has shown that this battery can be charged at up to 3C rates, it is recommended that this battery not be charged at rates higher than 1C to maximize the lifespan of the battery. Additionally, LiFe batteries should not be discharged below 2.5V per cell to avoid pre-mature failure and maximize battery life span.
We also recommend you REMOVE the batteries from your cars or radios when you are done, or at least unplug them to avoid accidental over discharge if the unit is left on.
Features:
Safe chemistry will not explode or catch fire
More mAh per gram compared to NiMH cells, meaning lighter models, and longer runtime
Virtually no "self discharge", so the battery is always ready to go even weeks after charging.
Superior voltage performance under load compared to NiMH cells, with consistent torque and speed.
Fast charge time
Specifications:
Voltage: 6.6V
Capacity: 2100mah
Chemistry: LiFePO4
Balance Charge Plug: XH
Charge Rate: 1C
Compatibility: Futaba 3PV, 4PK, 4PM, 4PV, 4PLS, 4PX, 7PX, 10PX, 16SZ, and 18SZ
Discharge Plug: JR/Futaba
Dimension (LxWxH): 76x41x17mm
Weight: 105g
This product was added to our catalog on December 16, 2021
PTK-5326, ProTek RC 2S Charge/Balance Adapter (4mm to 5mm Bullet Connectors)
This is a heavy duty 2S hard case lithium polymer battery charge/balance adapter lead from ProTek R/C. This 13" long charge lead allows you to plug a 2S battery with 5mm female bullet connectors directly to your charger, eliminating the need for a balance board!
This adapter lead features 4mm banana plugs on the charger end, and 5mm banana plugs on the battery end, connected with 14awg wire. The balance wires include a 2mm banana plug on the battery end, with a 7-pin XH plug connected with 22awg wire for balancing that is plugged directly into the 6S balance port in the charger.
This charge lead is specifically designed to connect a ProTek R/C 2S LiPo hard pack with 5mm connectors to ProTek R/C chargers, but will also work with any charger that uses 4mm bullet connectors for output, and has a 7-pin (6S) XH balance port.
This product was added to our catalog on December 16, 2021
PTK-7823-BK, ProTek RC Aluminum Flat Clamping Servo Horn (Black) (25T-ProTek)
This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place, increasing your chances of finishing the race! Plus, the horn has a 3.5mm thick arm for durability, with 16.5mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one black anodized servo horn, 3x10mm button head screw, 2x7.5mm clamp screw and a star lock washer.
Features:
Clamp design
16.5mm and 20mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
3.5mm thick arm
31mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline ProTek Output Shaft
This product was added to our catalog on December 16, 2021
ECP-2060, EcoPower Flame Resistant LiPo Charging Bag (Large, 23x30cm)
This is the EcoPower Flame Resistant Lithium Polymer Charging Bag, and is intended to reduce the chance of damage or injury in the event of a LiPo fire.
The EcoPower LiPo Safe Charging Bag is rated up to 30 watt-hours and is made of high tech space-age materials that will help to contain a lithium polymer battery fire. Place your lithium polymer battery inside the LiPo Safe Charging Bag and extend the charging wires through the top flap. Charge your LiPo batteries in the LiPo Safe Charging Bag for peace of mind and a higher level of safety. In the event of a lithium polymer battery mishap, the LiPo Safe Charging Bag’s fire-resistant material reduces the severity of the fire inside and vents the smoke outside of the LiPo Safe Bag. The Charging Bag is sealed with a thick, industrial strength Velcro flap and can also be used for safe transportation and storage of your Lithium Polymer batteries.
Due to the volatile nature of Lithium chemistry batteries, charging bags such as the EcoPower Lithium Polymer Flame Resistant Storage Bag are required by many tracks, flight clubs and at ROAR sanctioned events.
WARNING:
Never leave charging battery unattended
Always ensure the battery is on a non-flammable surface
Ensure flap is sealed while charging
This EcoPower lithium charging bag is intended to reduce the chance of damage in the event of a LiPo fire
Not recommended for batteries exceeding 30 watt-hours
Instructions: 1. Ensure that charger rate is properly set and polarity is correct 2. Attach charging leads to battery 3. Place battery toward the bottom of the LiPo Safe Bag 4. Place the LiPo Safe Bag on a non-flammable surface 5. Route charge leads through either vent at the sides of the flap top seam of the LiPo Safe Bag 6. Close top flap of the LiPo Safe Bag and press hook and loop closure fully closed 7. Charge battery using proper charging practices
Dimensions: 230x300mm (9x11.8 inches)
This product was added to our catalog on September 6, 2024
PTK-7825, ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T)
The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 20mm and 16mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one standard length servo horn, one 3x10mm button head screw and one 2x7.5mm clamp screw.Features:
Clamp design
20mm & 16.0mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
4.0mm thick arm
33mm Overall End to End length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Savox/ProTek Output Shaft
Unique Mounting Screw: PTK-H-1218
This product was added to our catalog on September 2, 2022
PTK-5308, ProTek RC 2S Charge/Balance Adapter Cable (XT60 Plug to 4mm Bullet Connector)
This is a "TruCurrent" XT60 Plug to 4mm Bullet Connector 2S balance adapter cable from ProTek R/C. ProTek R/C "TruCurrent" XT60 connectors ensure a mechanically solid, low resistance, high-amp capacity connection and are the ideal power connector for high current applications.
This product was added to our catalog on December 16, 2021
PTK-2109, ProTek RC Braided Brushless Motor Sensor Cable (300mm)
This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness.
The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a free moving and shock absorbing sensor cable while ensuring smooth, consistent and reliable data transfer between your ESC and motor.
This product was added to our catalog on March 16, 2021
