New Bee Drones

40 products


  • BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL

    RaceDayQuads BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL

    31 in stock

    M03 VTX, an ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer-range flying. Check out all our Micro/Nano VTXs and all our BetaFPV gear! Features With the 25-350mW output power, the M03 VTX provides a stable image and strong transmission. Only 1.1g and a tiny size for drones like 65-85mm whoop drones. The screw mounting holes pattern is suitable with BETAFPV micro canopy. The camera connector JST-0.8 is suitable for the BETAFPV C02 camera. Comes with IPX type of antenna, just plug and play, no extra solder work needed.  M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend using it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G). Diagram Below is the diagram of the M03 VTX. The camera connector is JST-0.8 and it is compatible with cameras like BETAFPV C01, BETAFPV C02, and NewBeeDrone BeeEye. How to connect with the Flight Controller Here is the diagram about how to connect the M03 VTX with F4 1S 5A FC (ELRS 2.4G) board. Here is the diagram about how to connect the M03 VTX with F4 1S 12A FC (ELRS 2.4G) board. Change Band & Band & Chnanel & Power M03 VTX could only use the Smart Audio port to change the band and channel.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -> VTX SA to change the frequency point and power. Switchable power includes 25mW, 100mW, 200mW and 350mW. Except for the method via OSD menu as show above, the output power could be changed via the power button. Specifications Item: M03 5.8G VTX Output power: 25/100/200/350mW (adjustable) Supply voltage range: 4.5-5.5V Weight: 1.1g (antenna not included) VTX internal size: 18X14mm Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz Channel SEL: SmartAudio Modulation type: FM Frequency control: PLL All harmonic: Max -50dBm Frequency stability: ±100KHz (Typ.) Frequency precision: ±200KHz (Typ.) Channel carrier error: ±1.5dB Antenna port: 50 Ω Operating temperature: -10℃~+80℃ Camera connector: JST-0.8, compatible with cameras like BETAFPV C01, BETAFPV C02 and NewBeeDrone BeeEye. Includes 1x BetaFPV M03 25-350mW 5.8G Micro VTX - U.FL 5x 30AWG silicone wire (30mm)

    31 in stock

    $25.99

  • Omni-Directional 5.8GHz Articulated SMA "Rubber Ducky" Antenna - Linear Omni-Directional 5.8GHz Articulated SMA "Rubber Ducky" Antenna - Linear

    RaceDayQuads Omni-Directional 5.8GHz Articulated SMA "Rubber Ducky" Antenna - Linear

    50 in stock

    Used to be everyone had a pile of these laying around. If you're flying a linear dipole on your whoop and wondering where your old rubber ducky flew off to, we've got you covered! NewBeeDrone explains it simply in their Honey Patch listing: "If you are using a linear whip antenna on your micro quad and using a circular antenna to receive you would be experiencing a 3db loss due to the mixed polarization signals, for each 3db drop in signal that is a half in power so effectively your 25mW vtx will only be seen as transmitting 12.5mW." Just a simple linear omni antenna, these work great when paired with a linear patch like the NewbeeDrone Honey Patch or the Menace Bandicoot on your diversity module. The downside of linear polarization is its susceptibility to multi-path interference. Locations with lots of metal and hard surfaces will tend to reflect lots of RF causing a noisy FPV feed. The ImmersionRC rapidFIRE module is terrific at handling this type of interference. Check out all our linear antennas as well as the entire receiver antenna selection! Features 360° rotation and 90° bend articulation of easy mounting and positioning Knurled SMA for easy installation and removal Cheap! Specifications Gain: 3 dBi Type: Omni-directional Dipole Polarization: Linear Vertical VSWR: 1.8:1 Frequency: 5100~5800MHz Size: L105xW10xH10mm Weight: 14g Includes 1x Omni-Directional 5.8GHz Articulated SMA "Rubber Ducky" Antenna - Linear

    50 in stock

    $2.99

  • NewBeeDrone Smoov V2 2306.5 2450Kv Motor NewBeeDrone Smoov V2 2306.5 2450Kv Motor

    RaceDayQuads NewBeeDrone Smoov V2 2306.5 2450Kv Motor

    8 in stock

    Ring Magnets for an FPV drone? Yes! Team NewBeeDrone put in countless hours to figure out how they could improve upon the Smoov-Certified freestyle motor which provides super smooth performance for freestyle and cinematic FPV while maintaining the durability and precision machining you've come to expect from NewBeeDrone. NBD are proud to say that we have done just that... again!The 2306.5 Smoov V2 ring magnet motor has not only improved upon our very successful V1 motor, it is now 3 grams lighter! It's constructed with 7075 aluminum alloy unibell design for the best structural rigidity and comes with fully molded ring-style magnets. Ring motors are also easier to clean than traditional motors. Unlike traditional square magnet motors, the Smoov ring magnets have no physical spacing between the magnets to allow for quick and easy removal of dirt, grime, or anything you can manage to get into them.Making a fully molded ring magnet with high magnetic flux density is at the heart of the design. NBD has developed a ring magnet that can hold up to N48SH levels! Ring magnets are typically used in camera gimbals because they need to operate silky smooth. Traditional gimbal motors are super smooth but they lack punch and power. The Smoov V2 motors have both, along with improved balancing and better performance. The Smoov V2 ring magnet motors have more punch, less weight, higher strength, and they're Smoover than ever! This motor is also available in 1750Kv! Check out our vast brushless motors selection, and all our NewBeeDrone products! Features Single-winding with 0.15mm lamination stator. Ring Magnet N48SH NdFeB V2 Super Smoov performance for freestyle and cinematic purpose Japanese NSK Bearing 7075 Aluminum 6" prop compatible with Motor Limit Settings in BetaFlight Specifications Input Voltage: 4S Stator Diameter: 23mm Stator Height: 6.5mm Shaft Diameter: 5mm Motor Dimension (Dia.*Len): Ø29.4mm*31.6mm Weight: 36g(include cable) Wire Size: 20AWG 150mm Bearing: NSK/NMB 684ZZ  Ø9×Ø4×L4mm Includes 1x NewBeeDrone Smoov 2306.5 2450Kv Motor 1x Hardware Pack

    8 in stock

    $24.99

  • Sale -32% NewBeeDrone Smoov V2 2306.5 1750Kv Motor NewBeeDrone Smoov V2 2306.5 1750Kv Motor

    RaceDayQuads NewBeeDrone Smoov V2 2306.5 1750Kv Motor

    Out of stock

    Ring Magnets for an FPV drone? Yes! Team NewBeeDrone put in countless hours to figure out how they could improve upon the Smoov-Certified freestyle motor which provides super smooth performance for freestyle and cinematic FPV while maintaining the durability and precision machining you've come to expect from NewBeeDrone. NBD are proud to say that we have done just that... again!The NewBeeDrone Smoov V2 2306.5 1750Kv Motor has not only improved upon our very successful V1 motor, it is now 3 grams lighter! It's constructed with 7075 aluminum alloy unibell design for the best structural rigidity and comes with fully molded ring-style magnets. Ring motors are also easier to clean than traditional motors. Unlike traditional square magnet motors, the Smoov ring magnets have no physical spacing between the magnets to allow for quick and easy removal of dirt, grime, or anything you can manage to get into them.Making a fully molded ring magnet with high magnetic flux density is at the heart of the design. NBD has developed a ring magnet that can hold up to N48SH levels! Ring magnets are typically used in camera gimbals because they need to operate silky smooth. Traditional gimbal motors are super smooth but they lack punch and power. The Smoov V2 motors have both, along with improved balancing and better performance. The Smoov V2 ring magnet motors have more punch, less weight, higher strength, and they're Smoover than ever! This motor is also available in 2450Kv! Check out our vast brushless motors selection, and all our NewBeeDrone products! Features Single-winding with 0.15mm lamination stator. Ring Magnet N48SH NdFeB V2 Super Smoov performance for freestyle and cinematic purpose Japanese NSK Bearing 7075 Aluminum 6" prop compatible with Motor Limit Settings in BetaFlight Specifications Input Voltage: 6S Stator Diameter: 23mm Stator Height: 6.5mm Shaft Diameter: 5mm Motor Dimension (Dia.*Len): Ø29.4mm*31.6mm Weight: 36g(include cable) Wire Size: 20AWG 150mm Bearing: NSK/NMB 684ZZ  Ø9×Ø4×L4mm Includes 1x NewBeeDrone Smoov V2 2306.5 1750Kv Motor 1x Hardware Pack

    Out of stock

    $24.99$16.99

  • NewBeeDrone Nitro Nectar Gold 3.8V 1S 300mAh 40/80C LiHV Whoop/Micro Battery - Choose Version NewBeeDrone Nitro Nectar Gold 3.8V 1S 300mAh 40/80C LiHV Whoop/Micro Battery - Choose Version

    RaceDayQuads NewBeeDrone Nitro Nectar Gold 3.8V 1S 300mAh 40/80C LiHV Whoop/Micro Battery - Choose Version

    105 in stock

    All batteries must be shipped by a ground shipping method. NBD is excited to introduce the Nitro Nectar Gold Series HV Lipo Battery Series! They use a different battery packaging technology that provides a better discharging rate for those who like to push the limit! They tested these batteries with their powerhouse 1S craft, the AcroBee BeeBrain BL BNF and they are built to keep up with the demand of raw thrust!  After 3 months testing, NewBeeDrone is ready to bring them to the market for whoop pilots across the world! Lightweight, durable and plenty of power to bring home the Gold! Check out our 1S battery selection, and all our NewBeeDrone gear! NOTE: These packs are designed to deliver a major amount of power!  With the discharge rate that gives these packs such power, you will feel pack sag much later than normal packs.  We suggest setting the low voltage reading to 3.5v and bringing it in to land at 3.3v.  You are able to fly below 3.3v but that may result in battery degradation. You will need a high voltage capable charger, such as our brand new Nectar Injector portable USB powered charger. Specifications Cell count: 1 Nominal voltage: 3.8V Max voltage: 4.35V Capacity: 300mah Continuous discharge rating: 40C Max discharge rating: 80C Dimensions: 62mm x 10.5mm x 6.5mm Weight: 8.10g (+/-1%) Plug: PH 2.0 or GNB27 Wire Length: PH2.0 None, GNB27 50mm Watt hours: 1.14 Wh Includes 1x Nitro Nectar Gold 3.8V 1S 300mAh 30/60C LiHV Whoop/Micro Battery

    105 in stock

    $6.99

  • NewBeeDrone Nectar Pigtail Connector Gold Plated Solid Pin PH2.0 26AWG 45mm Red Battery Lead - 5 Pack NewBeeDrone Nectar Pigtail Connector Gold Plated Solid Pin PH2.0 26AWG 45mm Red Battery Lead - 5 Pack

    RaceDayQuads NewBeeDrone Nectar Pigtail Connector Gold Plated Solid Pin PH2.0 26AWG 45mm Red Battery Lead - 5 Pack

    5 in stock

    The Nectar Connector Gold Plated Solid Pin features brass pins coated with a 24K gold layer. This design ensures an optimized power conversion for top-notch performance. With a continuous current of 9A at 4V, the pin temperature remains stable at 60°C after 5 minutes and can withstand up to 15A for 10 seconds with a max temperature of 120°C. This continuous power supply reduces power losses caused by heat and stops your board from overheating, making for smoother and longer-lasting flights. Check out all our pigtails and connectors as well as the rest of our NewBeeDrone products! Specifications Wire Length: 45mm Wire Gauge: 26AWG Weight: 0.6g (ea.) Connector: PH2.0 - Red Includes 1x NewBeeDrone Nectar Pigtail Connector Gold Plated Solid Pin PH2.0 26AWG 45mm Red Battery Lead - 5 Pack

    5 in stock

    $2.99

  • NewBeeDrone Nectar Connector PH2.0 Clear Battery Lead

    RaceDayQuads NewBeeDrone Nectar Connector PH2.0 Clear Battery Lead

    8 in stock

    Plagued with the current generic 2.0 plugs on the market, we got tired of being able to plug the connector in backward and possibly ruin your FC, so we made the best one possible.The Nectar Connector is a custom mold design with thicker plug walls that makes it literally impossible to plug a lipo in backward without breaking the battery side plug first. Never again will you fear if you have plugged in the right way and risk burning your FC. The transparent plug design gives a great style and also lets you see the condition of your pins when troubleshooting power issues. If you even look closely enough you can see the NBD letters! Check out all our pigtails and connectors as well as the rest of our NewBeeDrone selection! Includes 1x NewBeeDrone Nectar Connector PH2.0 Clear Battery Lead

    8 in stock

    $1.99

  • NewBeeDrone Max Comfort Foam Cushion for Fatshark HDO2 Goggles NewBeeDrone Max Comfort Foam Cushion for Fatshark HDO2 Goggles

    RaceDayQuads NewBeeDrone Max Comfort Foam Cushion for Fatshark HDO2 Goggles

    Out of stock

    Have you experienced any discomfort with the stock foam cushion on your HDO2 goggles?  Try the NewBeeDrone MaxComfort goggle cushion! Your old stock foam is beat and tired, experience the soft touch of their new foam! Check out our other FPV goggles and accessories, and our NewBeeDrone selection! Includes 1x NewBeeDrone Max Comfort Foam Cushion for Fatshark HDO2 Goggles  

    Out of stock

    $9.99

  • NewBeeDrone Max Comfort Foam Cushion for HDZero Goggles NewBeeDrone Max Comfort Foam Cushion for HDZero Goggles

    RaceDayQuads NewBeeDrone Max Comfort Foam Cushion for HDZero Goggles

    Out of stock

    Introducing the NewBeeDrone Max Comfort Foam Cushion for HDZero Goggles, designed to provide comfort and optimal functionality. With the foam's increased height at both sides eliminates light leakage while its high compressibility maintains an optimal distance between your lens and your eyes. It also has an ergonomic shape to conform to your face and provide a snug fit, plus added height at the bottom to distribute the weight across your face instead of your nose. Enjoy clear visuals and a comfortable fit with the HDZero Goggles cushion. Check out our other FPV goggles and accessories, and all our NewBeeDrone products! Features Easy to apply and remove. Made out of extra comfortable, Soft Touch NewBeeDrone Comfort Foam. Perfectly sculpted to fit all faces. The perfect thickness for comfort and goggle balance. Specifications 8.5mm thickness Color: Black Includes 1x NewBeeDrone Max Comfort Foam Cushion for HDZero Goggles

    Out of stock

    $11.99

  • NewBeeDrone Max Comfort Foam Cushion for Fatshark Goggles NewBeeDrone Max Comfort Foam Cushion for Fatshark Goggles

    RaceDayQuads NewBeeDrone Max Comfort Foam Cushion for Fatshark Goggles

    7 in stock

    Are you looking to upgrade the feel of your new Fat shark HDOs, HD3s, Dominators, or Attitudes? Try the NewBeeDrone MaxComfort goggle cushion! Your stock foam not cutting it, or beaten and tired? Experience the soft touch of NewBeeDrone's new foam. Check out our other FPV goggles and accessories! Specifications Foam Thickness: 11mm Includes 1x NewBeeDrone Max Comfort Foam Cushion for Fatshark Goggles

    7 in stock

    $9.99

  • NewBeeDrone Mark3 Micro FPV Camera & 25mW VTX w/ Goober Canopy AIO - Black NewBeeDrone Mark3 Micro FPV Camera & 25mW VTX w/ Goober Canopy AIO - Black

    RaceDayQuads NewBeeDrone Mark3 Micro FPV Camera & 25mW VTX w/ Goober Canopy AIO - Black

    Out of stock

    Check out the NewBeeDrone Mark3 Camera w/ Goober Canopy, as this micro camera comes with a micro canopy to protect your camera from a harsh crash!  However not just any canopy as the Goober canopy is one of the most durable and heavy canopies on the market. The Goober canopy was made for maximum protection for your hardware, and has very high durability, which comes with a bit more weight. With all this protection can you rest assured the safety for this new camera. An upgrade a to a design based on the Mark 2 Camera, The Hummingbird Camera Mark 3, with 25mW of true power output to provide the best performance for racing.   Be sure to check out all our Micro FPV cameras and our entire NewBeeDrone selection!  Features Steady and Undisrupted 25mW  No Blowouts Only sharp video for sharp flights Plug-N-Play Connector Wide Input Voltage Range Specifications VTX: 25mW  Camera: BeeEye Camera Weight: 5.0g Includes 1x NewBeeDrone Mark3 Camera w/ Goober Canopy - Black Wiring Diagram 

    Out of stock

    $39.99

  • NewBeeDrone Max Comfort Foam Cushion for DJI Goggles 2 NewBeeDrone Max Comfort Foam Cushion for DJI Goggles 2

    RaceDayQuads NewBeeDrone Max Comfort Foam Cushion for DJI Goggles 2

    13 in stock

    Are you tired of the stock DJI goggle foam that leaks light or is just plain uncomfortable?  Introducing the NewBeeDrone Max Comfort Foam Cushion for DJI Goggles 2, designed to provide comfort and optimal functionality. With the foam's increased height at both sides eliminates light leakage while its high compressibility maintains an optimal distance between your lens and your eyes. It also has an ergonomic shape to conform to your face and provide a snug fit, plus added height at the bottom to distribute the weight across your face instead of your nose. Enjoy clear visuals and a comfortable fit with the Goggles 2 max comfort foam cushion. Check out our other FPV goggles and accessories, and all our NewBeeDrone products! Features Easy to apply and remove. Eliminates light leak with included, optional V Pad for the bridge of the nose. Made out of extra comfortable Soft Touch NewBeeDrone Comfort Foam. Perfectly sculpted to fit all faces. The perfect thickness for comfort and goggle balance. Specifications 23mm at its thickest. 14mm at its thinnest. Color: Grey Includes 1x  NewBeeDrone Max Comfort Goggle Foam for DJI Goggles 2

    13 in stock

    $11.99

  • NewBeeDrone Azi Tri-Blade 40mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color NewBeeDrone Azi Tri-Blade 40mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color

    RaceDayQuads NewBeeDrone Azi Tri-Blade 40mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color

    26 in stock

    Introducing 40mm AZI props! NewBeeDrone is dedicated to providing the best FPV drone products in the industry. The Azi Props come from a 9-month project with NewBeeLabs to create micro props for flight time, speed, & control. After many iterations and tests, their team has developed light, well-rounded props for freestyle and racing. They boast linear throttle control, quicker spool-up times, cornering grip, higher top-end speed, bottom-end grunt, and efficient performance.  Check out the rest of our Micro Props, and the rest of our NewBeeDrone products. Specifications  Material: Polycarbonate Diameter: 40mm Pitch: 37.9mm Shaft Hole: 1mm 0.3g ea. Hub Thickness: 5mm Includes  1x NewBeeDrone Azi Tri-Blade 40mm Micro/Whoop Prop 4 Pack (1mm Shaft) - Choose Your Color

    26 in stock

    $3.99

  • NewBeeDrone Max Comfort Foam Cushion for DJI Goggles NewBeeDrone Max Comfort Foam Cushion for DJI Goggles

    RaceDayQuads NewBeeDrone Max Comfort Foam Cushion for DJI Goggles

    10 in stock

    Are you tired of the stock DJI goggle foam that leaks light or is just plain uncomfortable? Have you tried other aftermarket DJI goggle foams that don't fit right or make it difficult to breathe from your nose? We've tried them all too and none of them come close to the quality and comfort of the NewBeeDrone Max Comfort Goggle Foam for DJI Goggles.  Created from Soft Touch NewBeeDrone Comfort Foam, our goggle foam is perfectly sculpted to fit all face shapes.  Some foams are too thin and make goggles uncomfortable.  Others are too thick and make goggles stick out too far, throwing off the balance and making them feel heavy. The NewBeeDrone Max Comfort Goggles Foam is the perfect compromise at 23mm at its thickest and 14mm at its thinnest. We named them Max Comfort for a reason. Also included is an optional V Pad to eliminate that last little bit of light leak around the bridge of the nose that plagues some pilots. Throw out that old, sweaty, ill-fitting goggle foam and get the NewBeeDrone Max Comfort Goggle Foam for DJI Goggles. Check out our other FPV goggles and accessories! Specifications 23mm at its thickest. 14mm at its thinnest. Includes 1x  NewBeeDrone Max Comfort Goggle Foam for DJI Goggles 1x V Pad 1x Set of V Pad Velcro Squares

    10 in stock

    $12.99

  • NewBeeDrone Flow 0702 29,000Kv Dual Ball Bearing Micro Motor 4 Pack NewBeeDrone Flow 0702 29,000Kv Dual Ball Bearing Micro Motor 4 Pack

    RaceDayQuads NewBeeDrone Flow 0702 29,000Kv Dual Ball Bearing Micro Motor 4 Pack

    5 in stock

    Introducing the NewBeeDrone Flow 0702 motor, designed for Whoop racing. It weighs only 1.58g (1.38g without cables) and is equipped with double ball bearings for a smooth, durable performance. Crafted with 7075 aluminum, it stands strong against the toughest racing conditions. Experience peak performance and thrill with this ultimate motor choice. Get yours today and experience the thrill of racing like never before! Check out our other micro motors and all our NewBeeDrone products!  Specifications  Motor KV: 29000 (Designed for 1S) Internal Resistance (mΩ): 275 Stator Resistance (mΩ): 7 Stator Height (mm): 2 No.of Stator Slots: 9 No.of Rotor Poles: 12 Dynamic balance (mg): ≤10mg NO-Load Current(A):P 0.90A Maximum Power (W) 15.2 Maximum Current (A): 3.8 Overall Dimension(mm): Ø1xL12.2 Shaft Diameter(mm):30AWGxL40 ESC(A): 5 Rated Voltage(V): 4.2(1S) Includes 1x NewBeeDrone Flow 0702 29000Kv Dual Ball Bearing Micro Motor 4 Pack 4x JST1.25 Whoop Motor Plug Replacement 16x M1.4x3 Screws

    5 in stock

    $45.99

  • NewBeeDrone JST 1.25 Motor Plug Conversion Kit

    RaceDayQuads NewBeeDrone JST 1.25 Motor Plug Conversion Kit

    Out of stock

    A set of whoop motor plugs to solder onto motors and plug into whoop flight controllers.  JST 1.0 fits NewBeeDrone flight controllers while JST 1.25 fits all other flight controllers. Included are 2x red plugs and 2x black plugs. 50 mm length Check out all our pigtails and connectors as well as the rest of our NewBeeDrone selection! Includes 1x NewBeeDrone JST 1.25 Motor Plug Conversion Kit

    Out of stock

    $2.99

  • NewBeeDrone Flow 0702 27,000Kv Dual Ball Bearing Micro Motor 4 Pack NewBeeDrone Flow 0702 27,000Kv Dual Ball Bearing Micro Motor 4 Pack

    RaceDayQuads NewBeeDrone Flow 0702 27,000Kv Dual Ball Bearing Micro Motor 4 Pack

    10 in stock

    Introducing the NewBeeDrone Flow 0702 motor, designed for whoop racing. It weighs only 1.58g (1.38g without cables) and is equipped with double ball bearings for a smooth, durable performance. Crafted with 7075 aluminum, it stands strong against the toughest racing conditions. Experience peak performance and thrill with this ultimate motor choice. Get yours today and experience the thrill of racing like never before! Check out our other micro motors and all our NewBeeDrone products!  Specifications  Motor KV: 27000 (Designed for 1S) Internal Resistance (mΩ): 285 Stator Resistance (mΩ): 7 Stator Height (mm): 2 No.of Stator Slots: 9 No.of Rotor Poles: 12 Dynamic balance (mg): ≤10mg NO-Load Current(A):P 0.80A Maximum Power (W) 15.2 Maximum Current (A): 3.8 Overall Dimension(mm): Ø1xL12.2 Shaft Diameter(mm): 30AWGxL40 ESC(A):5 Rated Voltage(V): 4.2(1S) Includes 1x NewBeeDrone Flow 0702 27000Kv Dual Ball Bearing Micro Motor 4 Pack 4x JST1.25 Whoop Motor Plug Replacement 16x M1.4x3 Screws

    10 in stock

    $45.99

  • NewBeeDrone Flow 0802 27,000Kv Dual Ball Bearing Micro Motor 4 Pack NewBeeDrone Flow 0802 27,000Kv Dual Ball Bearing Micro Motor 4 Pack

    RaceDayQuads NewBeeDrone Flow 0802 27,000Kv Dual Ball Bearing Micro Motor 4 Pack

    Check out NewBeeDrone's Flow 0802 dual ball bearing whoop motor 27000kv (Set of 4) NewBeeDrone's FLOW series now gets a 0802 motor. These 0802 27,000kv motors were selected to give an option to those who want that "FULL SEND" raw power on their 1S whoops. These brushless motors bring everything to the next level.  Check out our other 0802 motors, and all our NewBeeDrone selection! Specifications Motor KV: 27400 Maximum Current: 6.2Amp Internal Resistance: 142mΩ Maximum Power: 24.8W Stator Diameter: 8.4mm Overall Dimension:Φ11.6 x 12.2mm Stator Height: 2mm Shaft Diameter: Φ1 x 4.2mm No.of Stator Slots: 9 Lead Wire Size: 30AWG x 50mm ESC(A): 10Amp Dynamic Balance: ≤10mg Rated Voltage: 4.2V(1s) NO-Load Current: 1.60Amp Includes 4x NewBeeDrone Flow 0802 27000Kv Dual Ball Bearing Micro Motor 4 pack 4x JST1.25 Whoop Motor Plug Replacement 16x M1.4x3 Screws

    $45.99

  • NewBeeDrone Flow 0802 25,000Kv Micro Motor 4 pack NewBeeDrone Flow 0802 25,000Kv Micro Motor 4 pack

    RaceDayQuads NewBeeDrone Flow 0802 25,000Kv Micro Motor 4 pack

    Out of stock

    NewBeeDrone's FLOW series now gets a 0802 motor. These 0802 25,000kv motors were selected to give an option to those who want that "FULL SEND" raw power on their 1s whoops. These brushless motors bring everything to the next level.  Check out our other 0802 motors, and all our NewBeeDrone selection! Specifications 0802 Motor Size 25,000kv (Designed for 1S) 1mm Shaft size Lead wire solder pads JST-1.0 Plugs installed 50mm cable length 2.16g each Includes 4x NewBeeDrone Flow 0802 25000Kv Micro Motors 4x JST1.25 Whoop Motor Plug Replacement 16x M1.4x3 Screws

    Out of stock

    $39.99

  • NewBeeDrone Cricket200 V2 F722 3-6S 20x20 Dual BMI270 Flight Controller NewBeeDrone Cricket200 V2 F722 3-6S 20x20 Dual BMI270 Flight Controller

    RaceDayQuads NewBeeDrone Cricket200 V2 F722 3-6S 20x20 Dual BMI270 Flight Controller

    4 in stock

    Experience top-tier flight performance with the NewBeeDrone Cricket200 V2 F722 3-6S 20x20 Dual BMI270 Flight Controller. This controller features a 3-6S power range, 20x20 mounting, and dual BMI270 processing power for a stable, reliable flight experience. Get ready for smooth, long-distance flight with this advanced drone controller. Check out our 20x20 FCs, and all our NewBeeDrone products! Features  Built-in 4 IN 1 ESC socket (including ESC telemetry, External current sensor) JST1.0 8Pin Plug and plug with NBD Cricket200 ESC/Infinity200 ESC. Also compatible with most of the ESC on the market. Built-in solder pads for ESC signal output and power Printed layout instructions ON the board - no need for instructions! DJI FPV Air Unit socket (use UART1 and UART6) 6 UARTS on board. Specifications  MCU:STM32F722 - 216MHz Gyro: 2 BMI270 BEC: 5V/3A Interface:6 Mounting Size: 20x20mm Size: 31.5x27mm Input Power:  3-6S Additional Infomation  3V3 100mA 9V 2A 18W Design for DJI FPV Air Unit 5V Camera Power BetaFlight OSD UART1 (Only RX, Air Unit connector) UART2 (Free) UART3 (Free) UART4 (TX and RX connected together for F.Port) UART5 (Only RX, ESC Telemetry) UART6 (MSP/Configuration Port for Air Unit) Firmware can be downloaded HERE. Includes  1x NewBeeDrone Cricket200 V2 F722 3-6S 20x20 Dual BMI270 Flight Controller 4x Grommets short 4x Grommets Long 1x Cricket200 FC to DJI Air module cable 70mm Wiring Diagram  

    4 in stock

    $69.99

  • NewBeeDrone F411 OpenLager Mini External Blackbox Module NewBeeDrone F411 OpenLager Mini External Blackbox Module

    RaceDayQuads NewBeeDrone F411 OpenLager Mini External Blackbox Module

    5 in stock

    NewBeeDrone smallest OpenLager F411 gives the capability of black box recording to any drone that doesn't have it. This is fantastic for tuning and finding issues in your system ! Check out our other flight controller accessories, and NewBeeDrone Selection.  Specifications Dimensions: 15x15mm Weight: 1.3g without cable Includes 1x NewBeeDrone F411 OpenLager Mini External Blackbox Module 1x Wiring cables Wiring Diagram  

    5 in stock

    $19.99

  • NewBeeDrone 75mm Cockroach Brushless Extreme-Durable Whoop Frame - Choose Color NewBeeDrone 75mm Cockroach Brushless Extreme-Durable Whoop Frame - Choose Color

    RaceDayQuads NewBeeDrone 75mm Cockroach Brushless Extreme-Durable Whoop Frame - Choose Color

    Out of stock

    NewBeeDrone Cockroach Brushless Extreme-Durable Frame 75mm Design Intent: For this frame, we worked to develop a platform that would neither fall below expectations nor limit the creativity of the FPV community. The Cockroach 75mm is lightweight and versatile. We improved durability and worked to deliver a vibrational signature that made tuning easier so you can get the most performance out of NewBeeDrone flight controllers and motors. Every gram of frame material was either added or taken away to ensure that what was left was there for a reason. Lightweight and Durable: We found a more forgiving and resilient material that doesn't sacrifice in weight or stiffness. Struts and other key support components have been redesigned to distribute and dissipate stress from crashes and falls with a total weight of 6.98g. Traditional Looks and Geometry: This 75mm Cockroach frame has adaptable FC locations and a multitude of additional mounting points across the frame. We delivered a frame that has 2 board locations with 1x1inch or 25.4x25.4mm hole spacing. One mounting location on the top and another below to mount an additional board like a DVR or a 4K HD recording board. The 2-board mounting adaptability allows for the possibility for a pusher-style flying configuration to be used as well. 1mm Carbon Fiber Plate A 1mm carbon plate is included for increased durability insurance. Though the frame can be flown without it, the carbon allows for additional adaptability and opens the frame's use for exciting opportunities in a pusher-style configuration. Flip the frame over and install it. Please be aware, the motor screws that come with the 75mm frame are expected to be used with carbon fiber. If you choose to use them without the carbon fiber plate – the screws may contact the motor PCB. This 75mm frame does not come with just one limiting battery mounting solution. We understand that depending on the utility and flying style, many people want to run one or two 300mah Nitro Nector Golds in the traditional battery position or in a ‘toilet-tank’ position. We have developed several printable, TPU battery mount solutions to use with the frame and are always open to your suggestions. Included are 4 3D printed mounting tabs. Use 2 to mount one Nitro Nectar Gold 1s Battery and all 4 to mount 2x Nitro Nectar Gold 1s Batteries. When using 2 batteries, you can choose to run them in either series (2s) to increase voltage or parallel (1s) to increase capacity. Easy and Inexpensive.  None of this is any good if it's super difficult to use and/or super expensive. So we made sure we set out to make something affordable. Key tolerances have also been fine-tuned to make installation and removal much easier. Any of our other whoop BNFs can be directly dropped in into the 75mm frame. Check out the rest of our micro frames and the rest of our NewBeeDrone products! Specifications Motor Mount Pattern: Tri 6mm Weight: 3.71g Includes 1x NewBeeDrone 75mm Cockroach Brushless Extreme Durable Whoop Frame

    Out of stock

    $3.99

  • NewBeeDrone M10Q Micro GPS w/ Compass (10th Gen) NewBeeDrone M10Q Micro GPS w/ Compass (10th Gen)

    RaceDayQuads NewBeeDrone M10Q Micro GPS w/ Compass (10th Gen)

    3 in stock

    Introducing the NewBeeDrone M10Q Micro GPS w/ Compass (10th Gen)'s advanced navigation capabilities, featuring wide-range precision GPS/compass technology. Improved accuracy, compact size, and lightweight design (17mmx12mmx5mm, 2.16g) make it ideal for navigating difficult terrain. Perfect for projects requiring space and weight conservation. The NewBeeDrone M10Q Micro GPS (10th Gen) is the ideal outdoor navigation tool. With its built-in compass, you'll be able to track your location while navigating remote areas with confidence accurately. Grab one of the newest, smallest, and most powerful FPV GPS on the market right now, brought to you by great people at NewBeeDrone.  Check out our other GPS options and all our NewBeeDrone products! Features 10th generation GPS Only weighing 2.16g Super tiny     Specifications Ceramic Antenna 2DB  Frequency: GPS L1, GLONASSL1, BDS B1, GALILEOE1, SBAS L1, QZSS L1 Compass: QMC5883 Baud Rate: 115200DPS Output Frequency: 1HZ-10HZ, Default 10HZ Power Supply: 5V  Speed Accuracy: 005M/S Weight: ~2.61g Includes 1x NewBeeDrone M10Q Micro GPS w/ Compass (10th Gen) 1x JST 0.8 6pin cable

    3 in stock

    $19.99

  • NewBeeDrone JST 1.0 Motor Plug Conversion Kit

    RaceDayQuads NewBeeDrone JST 1.0 Motor Plug Conversion Kit

    6 in stock

    A set of whoop motor plugs to solder onto motors and plug into whoop flight controllers.  JST 1.0 fits NewBeeDrone flight controllers while JST 1.25 fits all other flight controllers. Included are 2x red plugs and 2x black plugs. 50 mm length Check out all our pigtails and connectors as well as the rest of our NewBeeDrone selection! Includes 1x NewBeeDrone JST 1.0 Motor Plug Conversion Kit

    6 in stock

    $2.99

  • NewBeeDrone Infinity305 F4 3-6S 30x30 Flight Controller NewBeeDrone Infinity305 F4 3-6S 30x30 Flight Controller

    RaceDayQuads NewBeeDrone Infinity305 F4 3-6S 30x30 Flight Controller

    1 in stock

    Premium Controller with Quality Parts and FeaturesFeaturing F4 Processor and 45Amp BLheli32 with NewBeeDrone Smoov-certified hardware design that supports up to 3-6S batteries to provide the best and most reliable quality and performance for either freestyle or racing. Designed to support the DJI Air Unit.Though DJI Air Unit can only support up to 4S, the Infinity300 Stack can make the DJI Air Unite compatible with 6S batteries by providing a 9V 16W clean power for the DJI Air Unit. Plug-and-Play. No need to solder tiny wires.The Infinity300 Stack includes a bundle of wires to connect the Flight Controller and ESC and a bundle of wires to connect the Flight Controller to the DJI Air Unit. No need to solder any tiny wires, making it simple and clean to build. Check out our other flight Controllers and all our NewBeeDrone products! Specifications MCU: STM32F405 CPUE @ 168mhz, can be overclocked IMU: MPU6000 OSD: Betaflight OSD w/ AT7456Ev UART Ports: 6 UARTS USB: Micro USB Input: 3-6S Installing Hole: 30x30mm M3 Weight: 14g Includes 1x NewBeeDrone Infinity305 F4 3-6S Flight Controller 4x Grommets short 4x Grommets Long 1x Infinity305 FC to DJI Air module cable 40mm 1x Infinity305 FC to DJI Air module cable 100mm 1x Infinity305 FC to DJI Air module cable 150mm Wiring Diagram

    1 in stock

    $49.99

  • NewBeeDrone Grommets and Screws for BeeBrain Whoop FC

    RaceDayQuads NewBeeDrone Grommets and Screws for BeeBrain Whoop FC

    8 in stock

    A spare set of hardware for your BeeBrain or regular Inductrix flight control board. Check out our AIO flight controllers, as well as the rest of our NewBeeDrone selection! Includes 5x Grommets 5x Screws

    8 in stock

    $3.99

  • NewBeeDrone Infinity V2 PRO 3-6S 30x30 AIO Flight Controller w/ 55A 32bit ESC NewBeeDrone Infinity V2 PRO 3-6S 30x30 AIO Flight Controller w/ 55A 32bit ESC

    RaceDayQuads NewBeeDrone Infinity V2 PRO 3-6S 30x30 AIO Flight Controller w/ 55A 32bit ESC

    Out of stock

    NewBeeDrone Infinity AIO V2 is the next generation of Infinity AIO Flight Controller. NBD has invested an immense amount of R&D time to optimize the hardware between high current and signal processing layout to make the board extremely compact and with no interference. Additionally, by sealing every component inside the aluminum heatsink which acts like a shield to protect from dust and other conditions, NBD maximizes the physical toughness of the AIO stack. The NewBeeDrone Infinity AIO V2 Pro is upgraded from AIO V2. Now it comes with Dual BMI270 Gyro. Better performance on handling noise and better reliability. Dual-Gyros allows device redundancy and also measurement redundancy. Having two gyros mounted to each other, the flight controller is able to cancel out the effects of a noisy axis on one of the IMUs to better handle strong winds and gusts, allowing smoother flight capabilities for filming aerial views. Check out our AIO flight controllers, as well as the rest of our NewBeeDrone selection! Specifications Voltage Input: 3-6S MCU: STM32F745VEH6 Gyro: 2xBMI270 Blackbox: 16MB UARTs: 5 ESC MCU: SMT32G071 BLHELI32  Max Continuous Current: 55A  Max Burst Current: 65A BEC: 10V 3A 30W Design for DJI FPV Air Unit Betaflight OSD support Analog build I2C: SCL & SDA ready Buzzer: Yes LED: Yes 5V 3A Power supply for external LED or GPS module Mounting Pattern: 30.5x30.5  Weight: 22g Includes 1x NewBeeDrone Infinity V2 PRO 3-6S 30x30 AIO Flight Controller w/ 55A 32bit ESC 1x Infinity AIO V2 PRO to DJI Air Module Cable 100mm (Silicon wire) 1x Infinity AIO V2 PRO to DJI Air Module V2 Cable 100mm (Silicon wire) 2x Infinity AIO V2 PRO8 16Pin Cable 150mm (Teflon wire) 13x Nylon Lock Nut 5x Steel Screw M3x14 4x Grommets Short 4x Grommets Long 1x 470uf 35v Electrolytic Capacitor 1x XT60 Cable

    Out of stock

    $149.99

  • NewBeeDrone HummingBird F4 V2 AIO 1S Whoop Flight Controller (F4 FC / 12A 4in1 ESC) - ELRS 2.4GHz NewBeeDrone HummingBird F4 V2 AIO 1S Whoop Flight Controller (F4 FC / 12A 4in1 ESC) - ELRS 2.4GHz

    RaceDayQuads NewBeeDrone HummingBird F4 V2 AIO 1S Whoop Flight Controller (F4 FC / 12A 4in1 ESC) - ELRS 2.4GHz

    Out of stock

    We heard you asking for it, so we got it, the HummingBird F4 V2 Flight Controller, these AIO whoop style FCs are meant as replacements and upgrades for whoops/toothpick builds. This board is also the direct replacement board for NewBeeDrone BNF Hummingbird F4 V2.1 1S Brushless Whoop.  Check out all of our AIO Flight Controllers and our NewBeeDrone products for sale at RaceDayQuads! Specifications STM32F411 MCU (for the main controller (Preloaded with Betaflight) Support 1S battery ONLY Current sensor onboard ESC-12A Per Motor Channel BB21 MCU BlHeliS Support DShot(150 300 600) Multishot Gyro- BMI270 Onboard Sideway RGB LED controlled by Betaflight Support BeeSign signal compatible with NBD VTX-Camera System Onboard Diversity SPI SX1280 Receiver(EXPRESSLRS) MotorPlug JST1.0 NBD OSD(Betaflight OSD Compatible) 5V 2A Power support for external VTX Camera Or Receiver. Includes 1x BeeBrain BLV4 Flight Controller 4x Grommet 1x Mounting Kit 1x Receiver Antennas 1x VTX Antenna Wiring Diagram

    Out of stock

    $59.99

  • NewBeeDrone Flow 2207 2050Kv Race Motor NewBeeDrone Flow 2207 2050Kv Race Motor

    RaceDayQuads NewBeeDrone Flow 2207 2050Kv Race Motor

    2 in stock

    Check out the NewBeeDrone Flow 2207 2050Kv Brushless Race Motor. This motor has been through the works by professional drone pilots. Racers, especially the good racers knows what's up with having next-level parts. NewBeeDrone's fastest team has designed and tested the hell out of these motors to give us hence you, the next potential king of racing motors out there. Classic 2207 stator size, rated with 2050Kv for BEAST power for your 6S builds. Best of all, is the clean metal polish aesthetic on the motors, allowing guys to look perfect on any build. Check out our vast brushless motors selection, and all our NewBeeDrone products! Specifications Input Voltage: 6S Shaft Size: 5mm Weight: 33.3g Mounting Pattern: 16x16mm M3 Includes 1x NewBeeDrone Flow 2207 2050Kv Brushless Race Motor 1x Hardware Set

    2 in stock

    $19.99

  • NewBeeDrone Flow 0802 19,000Kv Micro Motor 4 pack NewBeeDrone Flow 0802 19,000Kv Micro Motor 4 pack

    RaceDayQuads NewBeeDrone Flow 0802 19,000Kv Micro Motor 4 pack

    Out of stock

    NewBeeDrone's FLOW series now gets a 0802 motor. These 0802 19,000kv motors were selected to give an option to those who want that "FULL SEND" raw power on their 1s whoops. These brushless motors bring everything to the next level.  Check out our other 0802 motors, and all our NewBeeDrone selection! Specifications 0802 Motor Size 19,000kv (Designed for 1s) 1mm Shaft size Lead wire solder pads JST-1.0 Plugs installed 50mm cable length 2.16g each Includes 4x NewBeeDrone Flow 0802 19000Kv Micro Motors 4x JST1.25 Whoop Motor Plug Replacement 16x M1.4x3 Screws

    Out of stock

    $39.99

  • NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC

    RaceDayQuads NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC

    5 in stock

    The NewBeeDrone Cricket200 V2 is a 55A 3-6S BLHeli_32 4-in-1 20x20 ESC, upgraded to include a full aluminum shield for protection. This new configuration brings an optimized layout, improved power support, and a double-sided heatsink and aluminum shield, which improves protection and heat dissipation from the previous single-sided version. Check out the rest of our 20x20 ESCs, and the rest of our NewBeeDrone products. Features Upgraded version of the first-generation Cricket200 ESC  Double-sided heatsink for improved heat dissipation Optimized layout and power support Enhanced durability and reliability Full aluminum shield coverage Heatsink design 8 Layer PCB with 2Oz Copper Signal plug JST1.0 8pin plug with NBD Cricket200FC  Specifications Weight: 13.0g  Deminsions: 39x29.5x8mm ESC Programming: BLHeli32 Mounting Holes: 20x20mm LiPo Power Input: 3-6S Burst Current: 65Ax4 Cont.Current: 55Ax4 Includes 1x NewBeeDrone Cricket200 V2 32Bit 55A 3-6S 20x20 4in1 ESC 1x Cricket200 FC to Cricket200 ESC cable 30mm 1x Cricket200 FC to Cricket200 ESC cable 50mm 1x Cricket200 FC to Cricket200 ESC cable 85mm 4x Short Grommets & 4x Long Grommets 1x 470uf 35v Electrolytic capacitor 5x Steel Screw 25mm 13x Nylon Nuts

    5 in stock

    $99.99

  • NewBeeDrone DJI O3 Air Unit 20x20 Adapter Mount NewBeeDrone DJI O3 Air Unit 20x20 Adapter Mount

    RaceDayQuads NewBeeDrone DJI O3 Air Unit 20x20 Adapter Mount

    1 in stock

    NewBeeDrone's DJI O3 AirUnit adapter mount is made of CNC Aluminum, and it can dissipate heat from the O3 Air Unit at the same time provide a strong mounting solution for the Air Unit.  Come see our other adapters and connectors as well as all of our NewBeeDrone Products that we sell at RaceDayQuads! Specifications Material: 6061 Aluminum Alloy  Mount to air unit: 25.5x25.5 O3 AirUnit mount screw M1.6 X8mm Mount to Drone frame: 20x20 M2  Thickness: 3mm Includes 2x CNC Aluminum Parts 5x M1.6 x 8mm Stainless steel screw Philips head

    1 in stock

    $6.99