The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability.
Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability.
In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation.
The ECO 2 Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone.
Have a look at the rest of our EMAX products, and our entire selection of motors!
Features
A brand new design with a rounded bell and stronger attachment points for increased durability.
Fully mirror-polished finish that shines and glistens with even the smallest hint of light.
Upgraded N25SH curved arc magnets for tighter airgap and better performance.
EZO 9mm bearing for unparalleled smooth operation.
Specifications
Includes
1x EMAX ECO II Series 2207 1700Kv Motor
The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability.Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability.In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation.The ECO II Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone.
Have a look at the rest of our EMAX products, and our entire selection of motors!
Features
A brand new design with a rounded bell and stronger attachment points for increased durability
Fully mirror-polished finish that shines and glistens with even the smallest hint of light
Upgraded N52SH curved arc magnets for tighter airgap and better performance
Precision NSK bearing for unparalleled smooth operation
Specifications
Kv: 2400
Input Voltage: 4-6S
Configuration: 12N14P
Motor Dimensions: 24.7*19.2mm
Stator Dimensions: 20*4mm
Shaft Diameter: 1.5mm
Wire Dimensions: 120mm 24awg
Mounting Pattern: 12*12mm
Weight (w/ wires): 18g
Includes
1x EMAX ECO II 2004 2400Kv Motor
EMAX is taking their ECO series into the micro class! Arguably the best qualty and performance from any "economy" motor our there, ECOs will give anything a run for their money!Check out all our micro motors and our EMAX gear!
Features
Precision durable ball-bearings
Steel shaft for high strength
Anodizing for finish and corrosion resistance
12x12mm hole pattern
Multi-strand copper windings
90mm 26 AWG silicone wire
Specifications
Framework: 9N12P
Length: 31.2mm
Diameter: 18.8mm
Propeller: 3" - 4"
Weight: 13.7g (W/O Silicone Wire)
Prop adapter: M5
Bearing Shaft: 2mm
Shaft Thread: CW
Includes
1x EMAX ECO 1407 4100Kv Micro Motor
EMAX is taking their ECO series into the micro class! Arguably the best qualty and performance from any "economy" motor our there, ECOs will give anything a run for their money!Check out all our micro motors and our EMAX gear!
Features
Precision durable ball-bearings
Steel shaft for high strength
Anodizing for finish and corrosion resistance
12x12mm hole pattern
Multi-strand copper windings
90mm 26 AWG silicone wire
Specifications
Framework: 9N12P
Length: 31.2mm
Diameter: 18.8mm
Propeller: 3" - 4"
Weight: 13.7g (W/O Silicone Wire)
Prop adapter: M5
Bearing Shaft: 2mm
Shaft Thread: CW
Includes
1x EMAX ECO 1407 3300Kv Micro Motor
The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability.Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability.In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation.The ECO II Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone.
Have a look at the rest of our EMAX products, and our entire selection of motors!
Features
A brand new design with a rounded bell and stronger attachment points for increased durability
Fully mirror-polished finish that shines and glistens with even the smallest hint of light
Upgraded N52SH curved arc magnets for tighter airgap and better performance
Precision NSK bearing for unparalleled smooth operation
Specifications
Kv: 2000
Input Voltage: 4-6S
Configuration: 12N14P
Motor Dimensions: 24.7*19.2mm
Stator Dimensions: 20*4mm
Shaft Diameter: 1.5mm
Wire Dimensions: 120mm 24awg
Mounting Pattern: 12*12mm
Weight (w/ wires): 18g
Includes
1x EMAX ECO II 2004 2000Kv Motor
EMAX is taking their ECO series into the micro class! Arguably the best qualty and performance from any "economy" motor our there, ECOs will give anything a run for their money!Check out all our micro motors and our EMAX gear!
Features
Precision durable ball-bearings
Steel shaft for high strength
Anodizing for finish and corrosion resistance
9x9mm hole pattern
Multi-strand copper windings
100mm 26 AWG silicone wire
Specifications
Framework: 9N12P
Length: 19.75mm
Diameter: 18.8mm
Propeller: 2.5" - 4"
Weight: 8.6g (W/O Silicone Wire)
Prop adapter shaft diameter: 1.5mm
Bearing Shaft: 2mm
Shaft Thread: CW
Includes
1x EMAX ECO 1404 3700Kv Micro Motor
Highest performance, smallest size, lightest weight - that is what the EMax Bullet 30 amp ESC offers. At a mere 3.9g (nearly half the weight of the closest competitor), and measuring 11.9 x 19.6mm, this ESC is TINY.
This ESC is capable of running all major protocols, including DShot 600, 300, and 150, and Multishot, and Oneshot 42/125. It comes pre-loaded with BLHeli 16.5, meaning you're ready to run out of the box.
Check out our ESC selection !
Features
The market's lightest and smallest ESC, designed specifically for high-level FPV racing.
Utilizing the latest BLHeli-S firmware (16.5), hardware PWM generates a signal to boost smoother throttle response and reduce noise.
Supports new digital signal: DSHOT, and analog signals: MULTISHOT, ONESHOT42, ONESHOT125.
Top quality MOSFET, ceramic capacitors. 3oz high TG PCB board, significantly improves heat dissipation and improves system efficiency.
New aluminum heat sink, offers protection from propeller strike damage.
Features high-temperature silicone signal cable for wire flexibility and ease of installation.
Specifications
Con.Current: 30A
Input Voltage: 2-4S
Weight: 3g
Includes
1x EMAX Bullet 2-4S DShot600 30A ESC
EMAX is taking their ECO series into the micro class! Arguably the best qualty and performance from any "economy" motor our there, ECOs will give anything a run for their money!Check out all our micro motors and our EMAX gear!
Features
Precision durable ball-bearings
Steel shaft for high strength
Anodizing for finish and corrosion resistance
9x9mm hole pattern
Multi-strand copper windings
100mm 26 AWG silicone wire
Specifications
Framework: 9N12P
Length: 19.75mm
Diameter: 18.8mm
Propeller: 2.5" - 4"
Weight: 8.6g (W/O Silicone Wire)
Prop adapter shaft diameter: 1.5mm
Bearing Shaft: 2mm
Shaft Thread: CW
Includes
1x EMAX ECO 1404 6000Kv Micro Motor
EMAX is taking their ECO series into the micro class! Arguably the best qualty and performance from any "economy" motor our there, ECOs will give anything a run for their money!Check out all our micro motors and our EMAX gear!
Features
Precision durable ball-bearings
Steel shaft for high strength
Anodizing for finish and corrosion resistance
12x12mm hole pattern
Multi-strand copper windings
90mm 26 AWG silicone wire
Specifications
Framework: 9N12P
Length: 31.2mm
Diameter: 18.8mm
Propeller: 3" - 4"
Weight: 13.7g (W/O Silicone Wire)
Prop adapter: M5
Bearing Shaft: 2mm
Shaft Thread: CW
Includes
1x EMAX ECO 1407 2800Kv Micro Motor
The Babyhawk O3 picks up where the Babyhawk II HD equipped with the Caddx Vista left off. Customers have loved the Babyhawk II platform, and we have heard the calls for a variant equipped with ExpressLRS and the DJI O3 Air Unit. This new version of Babyhawk is stronger than the previous generation and boasts a DJI O3 Air Unit, the new Babyhawk O3 can truly become a long-flying video capture acro drone for general use and fun as well as content creation. No more need to carry a GoPro, a big complaint of the Babyhawk II. Customers can now capture high-quality 4K video all with the onboard O3.
Check out all our pre-built quads, and all our EMAX gear!
Features
Improved video transmission with DJI O3 system
More durable frame redesigned for resilience.
Sub 250 grams
Specifications
Wheelbase: 155mm
Dry Weight: 154g
Frame Material: Carbon Fiber
Prop: Avan 3.5
Maximum size: 210mm
Input Voltage: 2-4S Lipo
Includes
1x EMAX BNF Babyhawk O3 w/ DJI O3 Air Unit - ELRS
The EMAX Avia NanoX props where designed for light and quick rippers like the Nanohawk X. But that doesn't mean that these props aren't perfect for your next build as well.
Check out the rest of our 3" props, and all our EMAX selection!
Specifications
Diameter: 3"
Blades: 2
Material: Polycarbonate
Hub Thickness: 5mm
Shaft Hole: 1.5mm
Weight: 0.7g
Includes
4x EMAX Avia Nano X Bi-Blade 3" Prop
Of the new Scimitar line from EMAX, the 3.0 is the most durable, most aggressively pitched. If you want more speed with insane durability to handle high powered motors, this is the prop to go for. This is a great choice for hard flying freestyle. The ultimate basher prop. There is no perfect prop. Check out the other Scimitar options, try some out and see how they suit your build and flying style.
Be sure to check out all our 5" props, and all our EMAX gear!
Features
Aggressive Pitch
Highly Durable
Specifications
Diameter: 5"
Pitch: 3"
Blades: 3
Moment of Inertia: 24.1 g*cm^2
Material: Polycarbonate
Weight: 5.4g
Includes
4x EMAX Avan Scimitar 5x3x3 Tri-Blade 5" Prop (2 CW, 2 CCW)
Of the new Scimitar line from EMAX, the 2.8 Quad-Blade set out to produce that quad blades do not mean "high amp draw." Using the Scimitar 2.8 design, this prop is a balance between each of the props with the addition of a super grippy design. If you prefer maximum control and grip in your racing or freestyle drone, this is the prop for you. There is no perfect prop. Check out the other Scimitar options, try some out and see how they suit your build and flying style.
Be sure to check out all our 5" props, and all our EMAX gear!
Features
Super Grippy
Maximum Control
Specifications
Diameter: 5"
Pitch: 2.8"
Blades: 4
Material: Polycarbonate
Weight: 6.2g
Includes
4x EMAX Avan Scimitar 5x2.8x4 Quad-Blade 5" Prop (2 CW, 2 CCW)
Replacement props for the EMAX BabyHawk R Pro 4" or any other high performance 4" build.
Be sure to check out all our 4" props, and all our EMAX gear!
Specifications
Diameter: 4"
Pitch: 2.8"
Blades: 3
Material: Polycarbonate
Weight: 3g
Includes
4x EMAX Avan Scimitar 4x2.8x3 Tri-Blade 4" Prop (2 CW, 2 CCW)
The Emax Avan Rush propeller 2.5x1.9x3 was designed for Babyhawk Race to maximize performance and flight time. This propeller is matched to Emax 1106 4500kv for 4s or the Emax 1106 6000kv on 3s. A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Utilizing thicker airfoils greatly increases durability and stiffness. Most of the weight is centralized near the hub creating a low moment of inertia of 1.24 grams*square centimeter which in turn makes a very responsive prop. The Avan Rush was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.
AVAN Rush 2.5 inch prop (2xCW 2xCCW) 1 set kit
Geometry:2.5 inch diameter1.9 inch pitch3 bladesInertial Properties:weight: 1.4 gramsMoment of Inertia: 1.24 g*cm^2
The Emax Avan Flow propeller 5x4.3x3 was designed to maximize control while remaining efficient. A true constant 4.3" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. With a special PC blend the Avan Flow weighs 4.3 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 13.4 grams*square centimeter which in turn makes a very responsive prop.
Best match for 2206 - 2207 - 2306 motors around 2400kv.
The Avan Flow was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints, aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds. A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller.
Be sure to check out all our 5" props, and all our EMAX gear!
Specifications
Size: 5"
Pitch: 4.3"
Blades: 3-Blade
Weight: 4.4 grams
Moment of Inertia: 13.4 g*cm^2
Includes
4x EMAX Avan FLOW 5x4.3x3 Tri-Blade 5" Prop (2CW, 2CCW)
EMAX has blessed us with another solid addition to our ever-growing selection of 2'' - 3'' gear! The Babyhawk series is a great selection for micro spec class racing so when you need to practice hard, you are going to need those extra props.
The Emax Avan Mini propeller 3x2.4x3 was designed for Babyhawk Race 3 inch to maximize flight time and performance. This propeller is matched to Emax 1106 4500kv for 3s and 4s flight. A true 2.4" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 3.05 grams*square centimeter which in turn makes a very responsive prop. The large blade chord makes the propeller very durable.
The Avan Mini was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.
A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.
Be sure to check out all our 3" props, and all our EMAX gear!
Specifications
3 inch diameter
2.4 inch pitch
3 blades
Weight: 1.25 grams
Moment of Inertia: 3.05 g/cm^2
Includes
12x EMAX Avan Mini 3x2.4x3 Tri-Blade 3" Prop (6CW, 6CCW)
Emax has entered the world of Express LRS products with its Aeris Link module. Available in both 915MHz or 2.4GHz for the best range and penetration! This module also features tons of output power and external power options, Choose Emax to feel confident in the skies using ELRS!
Check out all our ExpressLRS compatible gear, and our Emax Products!
Features
1000mW for 2.4GHZ ELRS
RGB fan displays battery level
OLED screen and joystick or LUA script friendly
2-5S operational voltages
Specifications
Module Bay Input Voltage: 5-12V
OLED Screen size: 1.29 " (Full size only)
OLED Screen resolution: 64 x 128 (Full size only)
Operating frequency: 2.4GHz ISM / 915MHz FCC
Output power: 10mW/25mW/50mW/100mW/250mW/500mW/1000mW
Refresh rate: 50Hz/100Hz/150Hz/250Hz/500Hz
Antennas: Moxon Directional Antenna (2.4GHz), RP-SMA connection
Configuration: Support signals of Crossfire Serial Data Protocol (CRSF) and OpenTX remote control
Interface: Type-C, JR interface
External Power: XT30 supporting 5-21V (2-5S) voltage input, 2S (8.4V) is recommended
Includes
1x Emax Aeris Link ELRS 2.4GHz Transmitter Module
The Emax Avan Blur propeller 2x1.9x3 was designed for Babyhawk Race 2 inch to maximize flight time and durability of the propeller without losing performance. This propeller is matched to Emax 1106 6000kv on 3s and 4s. A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Blur weighs 1.1 grams. Utilizing thicker airfoils greatly increases durability and stiffness. The hub diameter is also increased to thicken the root chord maximizing durability. Most of the weight is centralized near the hub creating a low moment of inertia of 0.77 grams*square centimeter which in turn makes a very responsive prop. The Avan Blur was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.
Be sure to check out all our 2" props, and all our EMAX gear!
Specifications
2 inch diameter
1.9 inch pitch
3 blades
weight: 1.1 grams
Moment of Inertia: 0.77 g*cm^2
Includes
4x EMAX Avan Blur 2x1.9x3 Tri-Blade 2" Prop (2CW, 2CCW)
Emax has entered the world of Express LRS products with its Aeris Link module. Available in both 915MHz and 2.4GHz for the best range and penetration! This module also features tons of output power and external power options, Choose Emax to feel confident in the skies using ELRS!
Check out all our ExpressLRS compatible gear, and our Emax Products!
Features
1000mW+ for 915MHz ELRS
RGB fan displays battery level
OLED screen and joystick or LUA script friendly
2-5S operational voltages
Specifications
Module Bay Input Voltage: 5-12V
OLED Screen size: 1.29 " (Full size only)
OLED Screen resolution: 64 x 128 (Full size only)
Operating frequency: 2.4GHz ISM / 915MHz FCC
Output power: 10mW/25mW/50mW/100mW/250mW/500mW/1000mW+
Refresh rate: 50Hz/100Hz/150Hz/250Hz/500Hz
Antennas: Moxon Directional Antenna (2.4GHz), RP-SMA connection
Configuration: Support signals of Crossfire Serial Data Protocol (CRSF) and OpenTX remote control
Interface: Type-C, JR interface
External Power: XT30 supporting 5-21V (2-5S) voltage input, 2S (8.4V) is recommended
Includes
1x Emax Aeris Link ELRS 900MHz Transmitter Module
Replacement 0802 II 15000kv Motor for Tinyhawk 3 with connector.
This moto can be used on other 1-2S builds!
Check out the rest of the Tinyhawk line and all our EMAX gear!
Includes
EMAX 0802 II 15000Kv Micro Motor for Tinyhawk III
Spare replacement motor for the EMAX Tiny Hawk II.
Tinyhawk II 0802 Brushless motor was updated from the original 08025 to be lighter weight and give greater performance. Giving the Tinyhawk II more control and lighter overall weight. This resulted in better flight characteristics and a more efficient system, while also giving better flight times by 20% depending on flight feel and use.
This motor has a plug
Check out all our TinyHawk parts, and EMAX gear!
Includes
1x EMAX 0802 16000Kv Micro Motor w/ Plug
All batteries must be shipped by a ground shipping method. New Packaging!
After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with BT2.0 connector in the current market, it has exclusive designed BT2.0 connector, which has broken through the bottle-neck of PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time and better performance, just need to simply modify its connector to BT2.0 connector.
BT2.0 Connector - the most significant revolution in 1S Whoop Drone.
We also carry 260mAh, 300mAh and 450mAh 1S BT2.0 packs!
Check out all our 1S batteries and our BetaFPV selection!
Not sure if it's worth to switch BT2.0? Check more from Joshua Bardwell'video- Proof that BT2.0 connector is better than PH 2.0
Since February 2019, we've got some feedback on Facebook about how eager they need the high quality of solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demand. BETAFPV always keeps moving forward with passion for breakthrough experiences.
After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with BT2.0 connector in the current market, it has exclusive designed BT2.0 connector, which has broken through the bottle-neck of PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time and better performance, just need to simply modify its connector to BT2.0 connector.
Features
BT2.0 connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector.
By solving the problem of voltage sag, the discharge of the 450mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning.
BT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with this BT2.0 450mAh 1S battery.
It is perfectly suitable for Emax Tinyhawk, it can provide stable and consistent power, which achieved dynamic balance and longer flight time. Just need to simply modify the PH2.0 connector to BT2.0 connector.
Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power.
High-end technology to guarantee high quality and consistent performance.
We released BT2.0-PH2.0 adapter cable, which is convenient to charge BT2.0 battery with stock PH2.0 charger. Meanwhile, we also release BT2.0 all-in-one battery Tester & charger for your need.
Specifications
Capacity: 450mAh
Rate: 30C/60C
Voltage: 4.35V
Dimension: 61x15x7.5mm
Connector: Betafpv BT2.0 connector
Weight: 12.7g(1pcs)
Includes
4x BT2.0 450mAh 1S 30C Battery
BT2.0 CONNECTOR
There is a graph of comparison between BT2.0 connector 1S 450mAh battery and Emax 1S 450mAh battery. The discharge current is 11A in this testing. You could see that it has longer time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.
All batteries must be shipped by a ground shipping method. Updated packaging.
BT2.0 Connector - the most significant revolution in 1S Whoop Drone. Since February 2019, we've got some feedback on Facebook about how eager they need the high-quality solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots' demands. BETAFPV always keeps moving forward with a passion for breakthrough experiences.After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with a BT2.0 connector in the current market, it has an exclusively designed BT2.0 connector, which has broken through the bottle-neck of the PH2.0 crappy crimped pins. What's more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time, and better performance, just need to simply modify its connector to BT2.0 connector.We also carry 260mAh, 300mAh and 450mAh 1S BT2.0 packs!
Check out all our 1S batteries and all our BetaFPV gear
Features
BT2.0 connector decreased the internal resistance of the connector effectively by upgrading the crimped pins to a 1.0mm banana connector and increasing the cross-sectional area of the 1.0mm banana connector.
BT2.0 300mAh 1S 30C Battery supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. With this BT2.0 300mAh 1S battery, all 1S brushless drones will gain powerful and perfect performance.
By solving the problem of voltage sag, the discharge of the 300mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without the disturbance of low voltage warnings.
Compared with the PH2.0 crimped pins, the BT2.0 connector is more durable and can discharge more currents in the same capacity and provide far more power. You can get a 2mins flight time in full throttle on Meteor65.
Specifications
Item: 1S battery
Capacity: 300mAh
Rate: 30C/60C
Voltage: 4.35V
Dimension: 67.3x11.8x6.1mm
Connector: Betafpv BT2.0 connector
Weight: 8.28g(1pcs)
BT2.0 Connector
There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 260mAh battery. The discharge current is 9A in this testing. You could see that it has longer discharge time and improvement in voltage sag with BT2.0 connector, which brings better flight performance.
Here is Betafpv Lab video to show you the best way to replace PH2.0 to BT2.0 connectors.
Includes
8x BT2.0 300mAh 1S 30C Battery
