TRA1541, Traxxas Servo Rod Connector Set (2)
This is a replacement Traxxas Servo Rod Connector Set, and is intended for use with the Traxxas Blast and Villain EX boats.
This product was added to our catalog on May 7, 2021
TRA1844, Traxxas Large Servo Saver
This is a large servo saver from Traxxas. This servo saver mounts to the servo, and provides protection for your steering servo by allowing flex in the steering linkage during a crash.
This product was added to our catalog on September 7, 2021
TRA1951, Traxxas Half Shafts Long Truck (2)
This is a set of two replacement long half shafts from Traxxas. These half shafts go between the differential, and the rear axle stubs. Set includes two external splined shafts, two internal splined shafts, and four metal universal joints.
Fits:
Traxxas Nitro Rustler
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
This product was added to our catalog on April 12, 2021
TRA2065R, Traxxas Servo Sub-Micro Waterproof Metal Gear
Servo, sub-micro, waterproof, metal gearThe 2065R waterproof sub-micro servo adds the superior durability of all-metal gears for the best driving experience possible.
Accessory part for these models:
1/18 LaTrax® Desert Prerunner
1/18 LaTrax® Rally
1/18 LaTrax® Teton®
Summit
TRX-4M™ 1/18 Ford® Bronco®
TRX-4M™ 1/18 Land Rover® Defender®
TRX-4® 1979 Chevrolet® Blazer®
TRX-4® 1979 Ford® Bronco®
TRX-4® Chevrolet® K10 High Trail Edition™
TRX-4® Equipped with Traxx®
TRX-4® Ford® Bronco®
TRX-4® Ford® F-150® High Trail Edition™
TRX-4® Land Rover® Defender®
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
This product was added to our catalog on September 7, 2021
TRA2075, Traxxas 2075 Digital High Torque Waterproof Servo
This is a replacement Traxxas Digital High Torque Waterproof Servo.
Specifications:
Torque: 125 oz-in
Speed: 0.17 sec/60°
This product was added to our catalog on April 20, 2021
TRA2075X, Traxxas 2075X High Torque Metal Gear Waterproof Digital Servo
This is a replacement Traxxas 2075X Digital High Torque Metal Gear Waterproof Servo. This servo is included with the TRX4 as standard equipment.
Features:
Metal Gear, Ball Bearing
Digital High-torque 125 oz-in.
Transit Time .17 sec/60°
L=55mm, H= 42.75mm, W=21.5mm
Fits:
Traxxas 4-Tec 3.0
Traxxas Drag Slash
Traxxas E-Revo VXL 2.0
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas TRX-4
Traxxas TRX-4
Traxxas Unlimited Desert Racer
This product was added to our catalog on April 14, 2021
TRA2255, Traxxas 400 High Torque Metal Gear Waterproof Brushless Servo (Red) (High Voltage)
The Traxxas 400 High Torque Metal Gear Waterproof Brushless Servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit.
The Power to Perform
With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.
Waterproof Not "Water Resistant"
Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.
For TRX-4 Installation
The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit (TRA2262) and a steel servo horn (TRA8247X) is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.
NOTE:
*Compatible with most Traxxas 1/10 scale electric models
Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn
Compatible with Traxxas nitro models using rechargeable 5-cell battery packs
Not recommended for X-Maxx
Features:
Factory fit for drop-in installation into Traxxas Models
Fully waterproof, not “water resistant”
Compatible with Traxxas Stability Management™ (TSM)
400 oz-in torque at 6.0V
0.15 sec/60° at 6.0V
Metal gears
Dual ball bearings
Brushless motor technology
Aluminum center case
Specifications:
Motor Type: Brushless
Operating Voltage: 6.0 - 7.4V DC
Speed: 0.15 sec/60° at 6.0V
Torque: 400 oz-in at 6.0V
Weight: 64g
Gears: Metal
Output Spline: 25T
Case: Plastic top/bottom, anodized aluminum center
Controller: Digital
This product was added to our catalog on April 12, 2021
TRA2443, Traxxas 36mm Camber Link Turnbuckle Set (2)
Replacement part for these models:
Bandit VXL
Drag Slash
Accessory part for these models:
Bandit
This product was added to our catalog on September 7, 2021
TRA2455, Screws, 4x24mm button-head machine (hex drive) (6)
4x24 mm button-head machine header screws with hex drive heads. Set of six.
This item was added to our catalog March 13, 2024
TRA2458A, Traxxas Front Shock Spring (White) (2)
This is a replacement Traxxas White Front Shock Spring Set.
Fits:
Traxxas Bandit
Traxxas Drag Slash
Traxxas Nitro Rustler
Traxxas Nitro Slash
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
This product was added to our catalog on July 22, 2021
TRA2514, Traxxas Racing Sponsors Decal Sheet
The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker headers.
This product was added to our catalog on September 7, 2021
TRA2532, Traxxas Tie Bar Fiberglass
This is a fiberglass tie bar from Traxxas. This tie bar goes on the front of the bulkhead, and both front hinge pins go through it.
Fits:
Traxxas Drag Slash
Traxxas Nitro Rustler
Traxxas Nitro Slash
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
This product was added to our catalog on September 7, 2021
TRA2744X, Traxxas 3mm Flanged Nylon Nuts (Black) (8)
Traxxas 3mm Flanged Nylon Nuts. This is a replacement set of 3mm nuts used on the Traxxas Sledge. Package includes eight 3mm flanged nuts.
This product was added to our catalog or updated on April 4, 2022
TRA2754, Traxxas Stub Axle Pins (4)
This is a set of four replacement rear axle stub pins from Traxxas. These axle stub pins go through the axle stub, and lock into the wheel hubs.
This product was added to our catalog on April 12, 2021
TRA3025, Traxxas XL-5HV 3S Waterproof Electronic Speed Control
This is the Traxxas XL-5HV 3S Waterproof Electronic Speed Control. HV stands for compatibility with the high voltage 3S LiPo battery packs for greater efficiency and power. In addition to the three standard profiles (Sport, Race and Training Mode), the XL-5 HV features a Trail profile that serves up a little bit of drag brake for smooth intuitive driving for most of your adventures. A new Crawl profile introduces hill hold and instant reverse for extremely technical courses. Either will help you navigate the trail with ease.
This product was added to our catalog on April 7, 2021
TRA3063X, Traxxas Series Battery Wire Harness (NiMH Only)
Traxxas Series Battery Wire Harness. Use the series harness to combine battery voltage and unlock the 50+mph speed potential of your model. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries. Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.
This product was added to our catalog on May 7, 2021
TRA3232X, Traxxas Super-Duty Long Glow Plug (2.5 & 3.3)
The long/medium super-duty glow plug is a direct replacement for TRX 2.5, 2.5R, and 3.3 engines. Traxxas glow plugs are the only plugs recommended for our engines.
Replacement part for these models:
Jato®
Nitro Rustler®
Nitro Slash
Revo®
Slayer® Pro 4X4
T-Maxx®
TRX® 2.5R
TRX® 3.3
This product was added to our catalog on September 7, 2021
TRA6814, Traxxas VXL-3S Velineon Brushless Power System Combo (Waterproof)
The next generation of extreme brushless horsepower is here, Ready-To-Race® from Traxxas—and now waterproof! Velineon™ is the ultimate brushless system delivering the tire melting horsepower, supercharged speeds, and ease of use that you expect from Traxxas. Just plug it in and it works.
The key to the Velineon’s extreme power output is total system optimization. Each component, from the Traxxas high-current battery connector, to the powerful Velineon 3500 brushless motor, is carefully engineered to work with other system components to eliminate restriction and allow maximum power flow. High-frequency transistors and advanced circuit design delivers incredibly smooth and refined throttle control. The Velineon system accepts the widest range of battery types, including 3-cell Lithium Polymer packs (3S LiPo packs). Built-in low-voltage detection in the VXL-3s electronic speed control helps keep LiPo battery packs in top condition.
Traxxas’ exclusive waterproof technology allows the Velineon system to operate in wet conditions, including mud and snow, with no special precautions required. You decide where the Velineon powered adventure leads—the only limits are your imagination.
Key Features:
Now Waterproof
Compatible with brushed, brushless and sensored brushless motors
Auto-detects the motor type
Accepts NiCad, NiMH (4-10 cells), and LiPo (2-3cells) battery packs
Built-in-two-stage low-voltage detection for LiPo battery packs
3 drive profiles:Sport Mode, Race Mode, and Training Mode
Two-Stage Thermal shutdown protection
Velineon 3500 Brushless Motor
10-Turn, 3500kV
Optimized for extreme power and efficiency in 1/10 vehicles
This product was added to our catalog on May 7, 2021
TRA3355R, Traxxas VXL-3S Brushless ESC (Waterproof)
This is the Traxxas VXL-3S Brushless Electronic Speed Control. This Speed Control simplifies brushless technology with easy, built-in profiles and intuitive programming. Tri-mode operation auto detects the motor type for brushed, sensored, or sensorless brushless motors. The VXL-3s uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5 family of ESCs so there's no tricky new procedures to learn. Traxxas exclusive patented Training Mode is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3s is equipped with two-stage low voltage detection to allow LiPo battery use. The VXL-3s is manufactured by Traxxas to ensure the highest level of quality and support and is backed by the Traxxas Lifetime Electronics Warranty.
Features:
The VXL-3s auto-detects the motor type for brushless and sensored brushless motors.
Patented Traxxas High-Current Connector eliminates a common bottleneck and maintains pure, unrestricted power flow from the battery to the brushless power system.
Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold.
Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs (11.1 volt)
The patented Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3s by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action.
Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There's no need for additional sensor wiring and hardware complexity.
The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures.
The VXL-3s is programmable with three drive profiles:
Sport Mode – Fwd / Brake / Rev
Race Mode – Fwd / Brake
Training Mode**™ – 50% Fwd / Brake / 50% Rev
More Features:
Multi-color LED provides clear feedback
Since the VXL-3s allows experimentation with many kinds of motors, it is equipped with numerous failsafe features to help protect against common mishaps that can cause other systems to fail.
Two-stage thermal shutdown protection protects the VXL-3s from overheating.
Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound.
Sensor Phase Detection™ protects against improperly wiring aftermarket sensored motors.
Sensored Motor Backup protection causes the VXL-3s to switch to sensorless operation if a motor sensor fails or sensor wires become disconnected. Sensored motors can be used without connecting the sensor wires to the sensor port on the ESC.
Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded.
Water resistant case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
Micro-fin aluminum heatsink dissipates heat.
The built-in auxiliary fan output powers a snap-on accessory fan for increased cooling capacity during extreme use. A handy clasp on the speed control case keeps the wire neatly in place until you are ready to use it.
MOSFET design provides high-current output (320 amp peak) with incredibly low resistance (.00075 (ohm)).
Gold plated 3.5mm bullet connectors on 12-gauge Maxx® Cable flow full power to the motor without performance strangling resistance.
Specifications:
Input Voltage: NiCad/NiMH 4-9 Cells (4.8 to 10.8 Volts DC);
LiPo 2-3 Cells: (7.4 to 11.1 Volts DC)
Case Size: 39mmW x 55mmD x 33mmH
Weight: 90 grams
Motor Limit (Brushed/Brushless): No motor limit
On Resistance Forward: 0.00075 Ohms
On Resistance Reverse: 0.00075 Ohms
Peak Current - Forward: 320A
Peak Current - Reverse: 320A
Braking Current: 320A
Continuous Current: 200A
BEC Voltage: 6.0 V
BEC Current: 2.5A (with 6-cell NiMH)
Power Wire: 12-Gauge Maxx® Cable
Input Harness Wire: 26 Gauge / 100mm
Transistor Type: MOSFET
Low Voltage Detection: 2-Stage indicators, switchable (on or off)
Thermal Protection: 2-Stage thermal shutdown
Single-Button Setup: Yes, Traxxas EZ-Set®
Battery Input Connector : Traxxas High-Current Connector
Motor Types (Autodetect): Brushed, brushless, sensored brushless
Ports: RX Input, motor sensor, auxiliary fan
Documents and Resources for TRA3355R
Traxxas VXL-3S Waterproof ESC Manual
This product was added to our catalog on April 12, 2021
TRA3614, Traxxas Body Mount Set
Fits:
Traxxas Nitro Stampede
Traxxas Rustler 2wd
Traxxas Stampede 2wd
This product was added to our catalog on September 7, 2021
TRA3635, Traxxas Bumper Fr/Mnt/4X12ccs/4X22bcs/3X12bcs (for LED light kit installation)
Traxxas Bumper Fr/Mnt/4X12ccs/4X22bcs/3X12bcs
This product was added to our catalog on March 25, 2021
TRA3636G, Traxxas Aluminum Steering Blocks w/Ball Bearings (Green) (2)
This is a set of two optional green aluminum steering blocks with ball bearings from Traxxas. These steering blocks mount the the front uprights, and support the front axles. Traxxas aluminum steering blocks improve appearance, ruggedness, and control of the officially-licensed Grave Digger model, and can also be used on Stampede, Rustler, Slash, and Bandit. In addition to the strength and precision of the machined billet 6061-T6 aluminum steering blocks, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in red, blue or green anodizing. All the suspension parts feature the strength and precision of machined billet 6061-T6 aluminum.
Features:
High-strength 6061-T6 aluminum construction
Vivid green-anodized finish
Easy bolt-on installation
Traxxas Quality and Precision
Also Fits Rustler, Stampede, Slash, and Bandit
This product was added to our catalog on April 17, 2021
TRA3644, Traxxas 39mm Camber Link Turnbuckle (2) (69mm center to center)
This is a pack of two replacement Traxxas 39mm Camber Link Turnbuckles. These turnbuckles are 69mm center to center and are assembled with rod ends and hollow balls. Package includes one left and one right side.
This product was added to our catalog on September 7, 2021
TRA3644X, Traxxas Aluminum 39mm Camber Link Turnbuckle (Blue) (2)
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
This product was added to our catalog on May 7, 2021
TRA3652G, Traxxas Aluminum Stub Axle Carriers (Green) (2)
This is a set of two optional green Aluminum Stub Axle Carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms, and support the rear axles. Traxxas aluminum accessories improve the appearance, ruggedness, and control of the officially-licensed Grave Digger model, and can also be used on Stampede, Rustler, Slash, and Bandit. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in red, blue or green anodizing. Simple bolt-on installation that anyone can perform inspires confidence for future upgrades.
Features:
High-strength 6061-T6 aluminum construction
Vivid green-anodized finish
Easy bolt-on installation
Traxxas Quality and Precision
Also Fits Rustler, Stampede, Slash, and Bandit
This product was added to our catalog on April 6, 2021
TRA3655R, Traxxas Heavy Duty Suspension Arms (Black)
These arms fit the rear position of 2WD models or front and rear positions of 4X4 models. But are not compatible with Slash 2WD models.
Heavy-duty suspension arms for Slash 4X4, Stampede, and Rustler feature a design which incorporates latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next speed run, these arms were built for extreme punishment.
Replacement part for these models:
Hoss 4X4 VXL
Rustler 4X4 VXL
Rustler 4X4
Slash 4X4 Ultimate
XO-1
Accessory part for these models:
BIGFOOT No. 1 Officially Licensed Replica
Rustler VXL
Rustler
Slash 4X4 VXL
Slash 4X4
Stampede 4X4 Unassembled Kit
Stampede 4X4 VXL
Stampede 4X4
Stampede VXL
Stampede
This product was added to our catalog on May 7, 2021
TRA3725X, Traxxas Battery Expansion Kit (Rustler/Bandit/Stampede)
The battery expansion kit from Traxxas allows the installation of larger format battery packs into the Velineon® powered Rustler VXL, Bandit VXL, and Stampede VXL. The package includes hardware to raise the electronic speed control mount and battery posts allowing clearance for taller battery packs.
This product was added to our catalog on May 7, 2021
TRA3737, Traxxas 39mm Turnbuckle Camber Link (Red)
Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/hollow balls (2)(See part 3741X for complete camber link set)
This product was added to our catalog on September 7, 2021
TRA3739, Traxxas Screw Pin Set
This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot.
Fits:
Traxxas Bandit
Traxxas Hoss
Traxxas Nitro Slash
Traxxas Rally
Traxxas Rustler 2wd
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 2wd
This product was added to our catalog on April 12, 2021
TRA3760, Traxxas Ultra Shocks (Long) (Black) (2)
This is a set of two replacement long shocks from Traxxas. Includes all parts to build two shocks.
This product was added to our catalog or updated on April 4, 2022
TRA4146X, Traxxas Clutch shoes (2)/ spring
This is a set of replacement clutch shoes and clutch spring for the TRX 2.5 racing engines used in Traxxas vechiles. This is all the replacement shoes for the Traxxas Revo monster trucks.
This product was added to our catalog on May 1, 2021
