Overview
Key Features
The Super Clod Buster body has been reproduced in injection-molded plastic
Highly-durable bathtub type monocoque chassis frame
Front/rear trailing arm suspension with 8 coil spring dampers
Front/rear sealed gearboxes are equipped with differential gears
Kit includes TEU-103BK ESC. (Original kit included a mechanical speed controller)
Two 540 motors included
Sticker sheet included
Needed To Complete
2-channel radio system
7.2 volt battery and charger
Tamiya synthetic lacquer spray paint to complete
Overview
The Super Clod Buster is back! This monster truck features a body that was inspired by classic pick-up trucks from the 1980’s, giving it a realistic appearance. The front grille, air intake and roll bar are recreated with metal-plated parts. The truck also features a twin-motor dual gearbox 4WD drivetrain, 8 coil spring dampers and massive 165mm diameter tires, as well as a 4-wheel drive steering system to help the model navigate tight corners.
Specifications
Completion Level: Kit
Drivetrain: 4WD
Power Type: Electric
Receiver: Sold Separately
Scale: 1/10
Speed Control: Sold Separately
Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World." Now Tamiya is offering more than 300 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.
The leader in hobby products around the world
Made using the highest quality components and materials
Test for durability and safety
Product Details
In The Box
(1) 1/10 Super Clod Buster 4WD Truck Kit
(1) HobbyWing THW 0880 Brushed Dual Motor ESC (2-4S)
(2) 540-brushed type motors
(1) Body Stickers
(1) Product Manual
Needed to Complete
2-channel radio
Steering servo
7.2volt battery & battery charger
Tamiya TS paint
Features
The Super Clod Buster body has been reproduced in injection-molded plastic
Highly-durable bathtub type monocoque chassis frame
Front/rear trailing arm suspension with 8 coil spring dampers
Front/rear sealed gearboxes are equipped with differential gears
Two 540 motors included
Sticker sheet included
Overview
Tamiya is proud to present the Super Clod Buster as an assembly kit. This monster truck features an American pick-up truck like body that gives it a realistic appearance. Front grill, air intake and roll bar have been recreated with metal plated parts. The Super Clod Buster features a twin-motor dual gearbox 4WD drive train, a durable link-arm, 8 coil springs and massive 165mm dia. tires for powerful and efficient running to overrun any obstacle. Want to enjoy monster truck running? The Super Clod Buster is made for you!
Two motors and 4WS system: The Super Clod Buster is equipped with two motors and tightly sealed gearboxes that have been molded as one piece with axle housing. Minimum power loss and smooth cornering are obtained thanks to a gear train transmission and differentials. The included Dual Motor ESC provides ample power to get your truck over obstacles. Furthermore, this monster truck is also equipped with a 4WS system for 4-wheel drive steering. This feature makes tight cornering with such a big machine easy!
Product Specifications
Completion Level
Kit
Charger
Sold Separately
Battery
Sold Separately
TAM58571A, 1/10 Porsche 911 Carrera RSR TT02 On Road 4WD Kit with Hobbywing ESC
Product Details
In The Box
(1) 1/10 Porsche 911 Carrera RSR TT02 On Road 4WD Kit
(1) HobbyWing THW 1060 Brushed ESC (2-3S)
(1) 540-brushed type motor
Needed to Complete
2-channel radio
Steering servo
7.2volt battery & battery charger
Tamiya PS paint
Overview
1973 was a dream year for the Porsche 911 Carrera RSR. The legendary Group 4 car won no fewer than 3 international races to go along with 7 domestic wins, and a glorious 12 months was capped with victory in the famed Targa Florio race held in Sicily. This is an R/C model assembly kit recreating the car, and the polycarbonate body accurately replicates its unmistakable form with wide front and rear fenders. The famous marking scheme can be recreated using paints and the included decals to depict the Martini stripes, numbers, sponsor logos and more. Front and rear 2-piece assembly wheels are mounted with racing slick tires for assured handling.Adaptable TT-02 Chassis offers balanced shaft driven 4WD. The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Product Specifications
Ball Bearings
Plastic bushing
Battery
Sold Separately
Body
Polycarbonate
Brakes
Integral with ESC
Bushing Material
Plastic
This product was added to our catalog on December 16, 2021
TAM58577, Tamiya Novafox 1/10 Off-Road 2WD Buggy Kit
The Tamiya Novafox 1/10 Off-Road 2WD Buggy Kit is an updated version of the popular Novafox 2WD buggy. The Novafox was a compliment to the famous Hotshot in the late 1980s. The slim polycarbonate body replicates the look of a full-size racing buggy, and its markings take inspiration from the original model. Bright gold color metal-plated wheels are fitted with front ribbed and rear oval block tires for excellent off-road performance. The model includes a driver figure to finish off the cockpit.
Updated Rear-Wheel 2WD Off-Road Chassis
This classic model retains the highly dust-resistant monocoque frame and 4-wheel independent double suspension, but has been updated to make it better suited to the modern R/C world. Dog-bone type drive shafts have been added, as well as a stabilizer to help neutralize chassis roll. A sealed gearbox and rear uprights now include a total of 8 ball bearings included as standard equipment, providing even more effective and efficient power transfer.
Features:
Durable ABS resin monocoque frame
Dual CVA dampers at the rear and 1 horizontally-placed CVA damper at the front
Gold-colored metal-plated wheels
4-Wheel Double Wishbone Suspension
CVA Oil Dampers x3 (Front & Rear Total)
Includes TEU-105BK ESC & 540-brushed type motor
Specifications:
Length: 425mm
Height: 133mm
Width: 225mm
Weight: 1,140g (Not including R/C equipment and battery pack)
Wheelbase: 260mm
Tread: 198mm (Front), 183mm (Rear)
Tire Width/Diameter: 23/83mm (Front), 38/88mm (Rear)
Gear Ratio: 8.7:1, 7.25:1
Needed to Complete:
2-channel Radio with high torque steering servo
7.2V 6-cell stick pack with Tamiya connector
Polycarbonate safe paint
This product was added to our catalog on December 16, 2021
This is a Tamiya 1/10 Toyota Supra 4WD TT-02D Drift Spec Kit. One of the most recognized Japanese sports cars around the world is the Toyota Supra. It has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Tamiya brings this well-known machine in the form of a Drift Kit on the TT-02D Drift Spec chassis. The Supra depicted in this kit is that of the Mark IV A80, which ceased to be produced in 2002.
TT-02 Drift Chassis
Enjoy the thrill of drifting with this specially tuned drift spec version of the TT-02 chassis. The chassis also features drift spec parts such as 24mm width drift tires (fitted to stylish matte-finish metal-plated wheels), and CVA shock units on the 4-wheel double wishbone suspension. Full ball bearings, an aluminum motor heat sink, and a sport-tuned motor come as standard. Of course, the chassis retains the original TT-02's excellent drivability, ease of maintenance, and adaptability.NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
Bathtub-type Frame
Shaft Driven 4WD
Front/Rear 4-Bevel Resin Differentials
3-Piece Steering Tie-Rod
4-Wheel Double Wishbone Suspension
Front/Rear CVA Oil Shocks
540 Sport-Tuned Motor
Full Ball Bearings
Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S)
Specifications:
Length: 457mm
Width: 186mm
Height: 125mm
Wheelbase: 257mm
Tire Width/Diameter (Front & Rear): 24/63mm
Gear Ratio: 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)
Needed to Complete:
2 channel radio system
Steering servo
Polycarbonate paint for body
7.2V - 7.4V Battery w/Tamiya Connector (Must use round type battery pack. Square shaped batteries will not fit battery compartment.)
Compatible Battery Charger
TAM58631-60A, Tamiya 1999 Subaru Impreza STI Monte-Carlo 1/10 4WD Electric Rally Car Kit (TT-02)
The 1999 iteration of the Subaru Impreza rally car, known for its balanced performance, featured a 4-cylinder turbocharged all-aluminum boxer engine, drive-by-wire throttle, and a semi-automatic 6-speed transmission. This RC assembly kit faithfully reproduces the Monte-Carlo rally version, capturing its distinctive form in durable polycarbonate. Separate parts are utilized for the rear wing and side mirrors, and the multitude of team and sponsor logos are recreated with included stickers. Operating on the versatile TT-02 chassis, this model excels on both road and flat dirt surfaces.
About the Subaru Impreza Monte-Carlo
Clear Body
The Clear and untrimmed body design of the 1999 Subaru Impreza rally car, showcased in the Monte-Carlo rally, is a testament to its dynamic and aerodynamic prowess. Crafted in durable polycarbonate, the body features an aerodynamically tuned silhouette, capturing the essence of rally performance. Distinctive elements include the rear wing and side mirrors, meticulously replicated with separate parts for enhanced authenticity. The kit includes an array of team and sponsor logos, brought to life by included stickers. This rally car's design seamlessly blends functionality with striking aesthetics, reflecting its remarkable balance and performance on the rally stage.
Performance Chassis
The TT-02 chassis, with its adaptable and balanced shaft-driven 4WD system, ensures excellent stability through a longitudinal layout featuring the battery on the left and the motor on the right. Its design incorporates identical left and right suspension arms and uprights for straightforward assembly, along with easily maintainable gearboxes. The chassis offers versatility with two wheelbases, two ground clearance settings, two tread setups, and a selection of ten gear ratios. Not only functional, it boasts aesthetic appeal with brake disc-shaped wheel hubs, stylish front bumper supports, gun metal color 10-spoke wheels, and sleek slick tires, delivering a sporty appearance.
Included Electronics
This chassis Kit includes both a torque tuned brushed motor and Hobbywing 1060 ESC. these components combine to deliver a performance enhanced on-road racing experience. The compact ESC boasts extreme performance, complemented by a built-in capacitor module for efficient power delivery. With exceptional current endurance capability, easily configurable parameters using ESC jumpers, and automatic throttle range calibration for user-friendly setup, the Quicrun 1060 stands out. Its impressive built-in BEC output capacity, built-in capacitor, and IP-67 waterproof rating further elevate its reliability, making it a top-tier choice for enthusiasts seeking optimal performance in their RC adventures. The RS-540 Torque-Tuned motor offers higher top speeds and increased acceleration.
Features:
Super smooth shaft-driven 4WD TT-02 chassis
Stickers and window masking for use in the body painting process
Sleek racing wheels to match the iconic body
The body is made of lightweight and rigid polycarbonate
Fully independent double wishbone suspension
Low maintenance Friction style shocks
Reliable Hobbywing THW 1060 Brushed ESC
Strong Torque tuned Mabuchi RS-540 brushed motor
High strength chassis constructed from ABS (Acrylonitrile Butadiene Styrene)
Buttery smooth grease filled differentials
Connector Information
When upgrading to a high current LiPo battery, it is recommended to also upgrade your battery connector. We recommend using an XT60 or T-Style connector for this application. Please check out the video below to learn how to solder on a T-Style connector.
Includes:
(1) Tamiya Subaru Impreza STI Monte-Carlo Kit
(1) Hobbywing 1060 ESC with Tamiya Connector
(1) Torque tuned 540 brushed motor
Manual
Needed To Complete:
2 channel radio system
(1) Standard or Low-profile Steering servo
Polycarbonate paint for body
(1) 7.2V NiMh battery with Tamiya Connector
Compatible Charger
Specifications:
Scale
1/10
Length
16.02in (407mm)
Width
7.32in (186mm)
Height
6.25in (159mm)
Wheelbase
10.11in (257mm)
Drive
4WD
Input Voltage
7.2V
Assembly Level
Kit*
*NOTE: RC Kits are an unassembled Remote Control Model that require assembly, racer selected electronics, and other racer provided items. Photos of assembled kit are for illustrative purposes only. For a complete list of needed items to drive this kit please see the list above.
This product was added to our catalog on December 16, 2021
TAM58632-60A, Tamiya Team Hahn Racing MAN TGS 1/14 4WD On-Road Semi Truck
Tamiya Team Hahn Racing MAN TGS 4WD On Road Semi Truck is a faithful replica of the Team Reinert trucks racing in the European Truck Racing Championship. Weighing in at a colossal 5,400kg these trucks truly are the heavyweights of motorsport! But size isn't the only thing that's extreme about these incredible machines. The Team Hahn Racing MAN TGS truck is powered by a huge 1,100hp turbocharged diesel engine. To get that phenomenal power from the engine to the tarmac is no easy task, which is why the truck takes advantage of a Mechanical 16-speed ZF gearbox to get it up to speed.
This Tamiya radio control replica faithfully captures the giant race truck of the Team Hahn Racing Team. In 2015, driver Joachim Hahn piloted the truck to a creditable 3rd position in the Championship. The polycarbonate body sits atop the TT-01 E chassis, which is designed for easy assembly and maintenance. This specific kit includes a Hobbywing THW-1060 Brushed ESC for incredible performance.
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
4-piece durable and lightweight polycarbonate body.
Details such as engine, turbocharger and frame are faithfully reproduced on the polycarbonate body.
Separately molded ABS plastic parts recreate side mirror, coupler and rear bumper.
Included marking stickers recreate the sponsor livery of the #3 Team Hahn Racing truck from the 2016 FIA season.
Wheels and 70mm diameter radial tires are specifically designed for racing truck models.
Molded parts to make the model compatible with LED lights. (Tamiya LED Light Unit sold separately)
Includes a Hobbywing THW-1060 Brushed ESC
Needed to Complete:
2 channel radio system
Steering servo
Polycarbonate paint for body
7.2V battery & charger
This product was added to our catalog on December 16, 2021
TAM58642-60A, Tamiya Team Reinert Racing MAN TGS 1/14 4WD On-Road Semi Truck
The Tamiya Team Reinert Racing MAN TGS 4WD On Road Semi Truck is a faithful replica of the Team Reinert trucks racing in the European Truck Racing Championship. Weighing in at a colossal 5,400kg these trucks truly are the heavyweights of motorsport! But size isn't the only thing that's extreme about these incredible machines. The Team Reinert Racing MAN TGS truck is powered by a huge 1,100hp turbocharged diesel engine. To get that phenomenal power from the engine to the tarmac is no easy task, which is why the truck takes advantage of a Mechanical 16-speed ZF gearbox to get it up to speed.
This Tamiya radio control replica faithfully captures the giant race truck of the Team Reinert Racing Team. It competed in the 2016 running of the FIA European Truck Racing Championship. The polycarbonate body sits atop the TT-01 E chassis, which is designed for easy assembly and maintenance. This specific kit includes a Hobbywing THW-1060 Brushed ESC for incredible performance.
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
4-piece durable and lightweight polycarbonate body.
Details such as engine, turbocharger and frame are faithfully reproduced on the polycarbonate body.
Separately molded ABS plastic parts recreate side mirror, coupler and rear bumper.
Included marking stickers recreate the sponsor livery of the #77 Team Reinert Racing truck from the 2016 FIA season.
Wheels and 70mm diameter radial tires are specifically designed for racing truck models.
Molded parts to make the model compatible with LED lights. (Tamiya LED Light Unit sold separately)
Includes a Hobbywing THW-1060 Brushed ESC
Needed to Complete:
2 channel radio system
Polycarbonate paint for body
7.2V battery & charger
Steering Servo
This product was added to our catalog on December 16, 2021
TAM58661-60A, Tamiya Buggyra Fat Fox 1/14 4WD On-Road Semi Truck Kit
The Tamiya Buggyra Fat Fox 1/14 4WD On-Road Semi Truck is a scale recreation of the full size Buggyra Racing Fat Fox truck piloted in the 2018 season of the European truck racing circuit by 2017 champion Adam Lacko. The realistic 3-piece body is made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts. The TT-01 Type-E chassis is a proven performer, and this chassis is fitted with dedicated semi-truck wheels and tires for the model.
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with wheels developed just for this model; the high sidewalls make for forgiving turns.
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
1/14 scale R/C model assembly kit
The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape
Black molded wheels and 70mm diameter radial tires are specifically designed for racing truck models
Includes 540-Type Brushed motor
Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S)
Specifications:
Length: 420mm
Width: 187mm
Height: 188mm
Needed to Complete:
2 channel radio system
Steering servo
Polycarbonate paint for body
7.2V - 7.4V Battery w/Tamiya Connector (Must use round type battery pack. Square shaped batteries will not fit battery compartment.)
Compatible Battery Charger
This product was added to our catalog on August 25, 2022
TAM58683-60A, Tamiya Tankpool24 Mercedes Actros 1/14 4WD On-Road Semi Truck
This is a Tamiya 1/14 Tankpool24 Mercedes Actros 4WD On-Road Semi Truck, an impressive model that recreates the Mercedes Actros as raced by the Tankpool24 team in the 2019 ETRC (European Truck Racing Championship). This specific recreation depicts the truck that carried the team to 4th place on the year, with veteran Hungarian driver Norbert Kiss 6th overall in the drivers’ standings. The realistic body is a 3-piece set made from lightweight and durable polycarbonate, with separately molded plastic side mirrors, coupler and rear bumper parts. The TT-01 Type-E chassis is a proven performer, and this chassis is fitted with dedicated semi-truck wheels and tires for the model.
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with wheels developed just for this model; the high sidewalls make for forgiving turns. NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a full list of items required to complete the model.
Features:
1/14 scale R/C model assembly kit
Three-part polycarbonate body with components for body, cab and coupler
Separately molded plastic parts depict side mirrors, front and rear light cases, plus the grille emblem
Includes stickers recreating the sponsors and livery
Silver color molded wheels and 70mm diameter radial tires are specifically designed for racing truck models
The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customization potential
TT-01 Type-E chassis Hop-Up Options available
Includes 540-Type Brushed motor
Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S)
Specifications:
Adjustable Gear Ratio: Yes
Bearings: Plastic bushing
Body Material: Polycarbonate
Body Stickers: Included
Chassis Material: ABS Plastic
Chassis Type: TT-01E
Construction Type: Assembly Kit
Differential Type: Gear
Drive Type: 4WD
Electronic Speed Control: Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S)
Motor: Brushed 540 Type
Length: 441mm
Width: 188mm
Wheelbase: 257mm
Needed to Complete:
2 channel radio system
Steering servo
Polycarbonate paint for body
7.2V battery & charger
This product was added to our catalog on December 16, 2021
TAM58701-60A, Tamiya Opel Calibra V6 Cliff 1/10 4WD Electric Touring Car Kit (TT-01E)
TAM58701-A, Tamiya Opel Calibra V6 Cliff 1/10 4WD Electric Touring Car Kit. Nothing screams classic 1990’s touring car DTM racing like the Opel Calibras that tore up racing circuits across Germany. The Opel Calibra V6 Cliff took part in the 1995 running of the Deutsche Tourenwagen Meisterschaft (DTM) series. Entered by Joest Racing with the driver JJ. Lehto, the car was powered by a 2.5-liter V6 engine capable of 420 hp. Tamiya faithfully recreated this using a highly detailed polycarbonate body. This body sits on a TT-01 Type-E chassis for incredible performance.
TT-01E Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon top deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce a fun driving car.
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
1/10 scale R/C model assembly kit
The TT-01 Type-E chassis features shaft-driven 4WD system and full independent suspension that offers easy handling and great customizability
Silver ABS, dish wheels are paired with racing slick tires
Comes with stickers and window masking stickers for use in the paint job process
Includes Tamiya Torque-Tuned 540-brushed motor
Includes a Hobbywing THW-1060 Brushed ESC
Specifications:
Length: 448mm
Width: 185mm
Height: 128mm
Wheelbase: 257mm
Bearings: Plastic Bushing
Chassis Material: ABS Plastic
Chassis Type: Assembly Kit
Drive Type: 4WD
Terrain Use: On-Road
Needed to Complete:
2 channel radio system
Steering servo
Polycarbonate paint for body
7.2 - 7.4 volt battery
Compatible Charger
This product was added to our catalog on April 28, 2022
This R/C model recreates the Toyota GR Supra GT500. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons from 2017 to 2019. With the streamlined car design of the roadgoing GR Supra, this racing car features a carbon monocoque frame, dedicated aerodynamic components and transmission, plus a 2,000cc inline 4-cylinder direct injection turbo-charged engine "RI4AG."
The accurately depicted au Tom's GR Supra body is made of polycarbonate and ABS plastic wing and mirror pieces, which sits on top of our most builder user friendly TT-02 entry-level on-road chassis.
TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels and slick tires make for a racy finish.
Specifications:
1/10 scale R/C model assembly kit. Length: 466mm, width: 188mm, height: 125mm. Wheelbase: 257mm.
The body is made of lightweight, rigid polycarbonate with separate polycarbonate front light cases (LEDs are not attachable) and canards.
Separate black ABS resin parts realistically depict distinctive side mirrors and a large rear wing.
The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.
12-spoke gun metal wheels are paired with racing slick tires.
Includes motor and THW-1060 ESC.
TAM58712-60A, Tamiya Porsche 911 GT3 (992) 1/10 4WD Electric Touring Car Kit (TT-02)
Tamiya Porsche 911 GT3 (992) 1/10 On-Road 4WD Touring Kit
Tamiya Porsche 911 GT3 (992) 1/10 4WD Electric Touring Car Kit. The Porsche 911 GT3 (992) features a 4.0L flat-six cylinders engine capable of producing 503 horsepower and can go (0–62 mph) in 3.4 seconds! Thanks to its large rear wing and unique front bumper, the rear wing that provides downforce at high speeds to increase track control and the front bumper that includes air intakes that help to cool the engine and improve brake cooling, this 911 GT3 is a speed weapon with a breathtaking style! Tamiya has faithfully replicated the 911 GT3 on a stunning and highly detailed polycarbonate body without leaving anything to the imagination!
TT-02 Chassis:
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers two different wheelbases, two ground clearance settings and two tread set-ups in addition to a range of ten possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Note: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.specifications:
Scale: 1/10
Type: On-Road Touring
Length: 467mm
Width: 188mm
Height: 131mm
Wheel Base: 251mm (Short Wheelbase)
Drivetrain: 4WD Shaft Driven
Includes:
(1) Tamiya TT-02 1/10 4WD Electric Touring Car Kit with Porsche 911 GT3 (992) Body
(1) 1060 Hobbywing ESC
(1) 540 motor
Needed to Complete:
(1) 2-channel Transmitter/Radio
(1) Steering Servo
(1) 2S (7.2V-7.4V) Battery
(1) Compatible charger
Polycarbonate paint for body
This product was added to our catalog on January 8, 2024
TAM58719, Tamiya BBX 2WD Off-Road Buggy Kit (BB-01)
Tamiya BBX 2WD Off-Road Buggy Kit
BBX 2WD Off-Road Buggy Kit. The RBX BB-01 scale Dune buggy was inspired by Tamiya's back catalog of iconic 2WD off-road buggies. This high performance off-road machine features a redesigned chassis, reminiscent of 1980’s sand rail dune buggies, is a hybrid monocoque-roll cage, and employs rear trailing arm suspension inspired by full-size UTV’s. All this is wrapped in a 0.7mm thick polycarbonate body designed and crafted by the renowned Japanese artist Atsushi Arino, features a classic 1980’s-inspired livery, complemented by retro wheels and tires for a nostalgic touch.
Features:
Full ball bearings and universal drive shafts
TA06 rear ball differential for consistent traction
Four-wheel double wishbone suspension system
One-piece monocoque frame and roll cage
Metal-plated bead lock type wheels are paired with large-diameter tires
Removable rear cage for ease of maintenance
Specifications:
Scale: 1/10
Length: 16.2in (414mm)
Width: 9.1in (233mm)
Height: 5.3in (136mm)
Wheelbase: 11.1in (283mm)
Drive: 2WD
Power Source: Electric
Assembly Level: Kit
Includes:
(1) Tamiya BBX 2WD Off-Road Buggy Kit (BB-01)
Needed to Complete:
ESC and Motor
(1) 2-channel Transmitter/Radio
(1) Low Profile Steering Servo
(1) 2S (7.2V-7.4V) Battery
(1) Compatible charger
Polycarbonate paint for body
This product was added to our catalog on August 1, 2023
TAM58720, Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit
This is the Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit. An upgraded version of the TT-02 Type-S kit Series that comes loaded with Tamiya Hop-up parts, 37mm drive shafts, aluminum propeller shaft and lightweight aluminum joint cups to reduce 7.8g of the weight, making this kit a capable performer out of the box and a great option to start racing!
Note: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
Included Tamiya Hop-Up options:
37mm Drive shafts for double Cardan joint shafts
Carbon fiber damper stays
XV-02/TT-02 oil gear differential unit
XV-02/TT-02 (39T) front direct coupling set
06 Module (27T) hard-coated aluminum pinion gear
TRF419 Suspension upgrade set
Aluminum propeller shaft
(68T) High speed gear set
5mm Thick clamp type blue aluminum wheel hex
TRF damper oil seal
Cross joints for low friction assembly universal shafts
Short ball connector nuts for TRF dampers
Blue 4mm aluminum serrated wheel nut
Universal drive shafts to maintain a stable drivetrain regardless of suspension stroke
Full ball bearings
Independent double wishbone suspension
Front direct spool ensures ease of assembly and stable drivability
Specifications:
Scale: 1/10
Chassis Type: TT-02
Suspension: Independent double wishbone
Suitable Terrain: On-Road
Drivetrain: 4WD Shaft Driven
Includes:
(1) Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit
(1) Carrying case dedicated for the TT-02 Type-SRX chassis
Needed to Complete:
(1) 2-channel Transmitter/Radio
(1) Steering Servo
(1) 1/10 Electronic Speed Controller
(1) 540 motor,
(1) 7.2 - 7.4V battery
Compatible charger
257mm Polycarbonate body
Polycarbonate paint for body
Tires
This product was added to our catalog on July 31, 2023
TAM61087, Tamiya 1/48 Messerschmitt Me262 A-1A
This is a Tamiya 1/48 Scale Messerschmitt Me262 A-1A Model Airplane. The revolutionary Messerschmitt Me262 was the first jet powered plane to see service. The construction of pre-production aircraft designated Me262 A-0 started in April 1944 but the fighter production version that should have been the first version to be mass-produced was delayed because of Hitler's strict contrary orders prioritizing the deployment of fighter/bomber A-2a version. Then, in November 1944, the Me262 A-1a fighter version was finally put into production. It was equipped with four 30mm cannons in the nose to counter Allied bombers and escorting fighters. Late production planes were equipped with hooks under the nose to mount rocket launchers and with 24 R4M air-to-air rocket under the wings making the Me262 the most feared German fighter by Allied pilots.
Tamiya presents the plastic assembly kit of the Messerschmitt Me262 that was used by the Luftwaffe during the closing days of WWII. 1/48 Scale, Overall Length: 221mm, Overall Width: 264mm. The unique form of the Me262 with its engine nacelles under each wing has been accurately replicated. The 4 X 30mm cannon mounted in the nose and cockpit have been reproduced down to the finest details. Canopy and gun bay access panels can be mounted in either open or closed position. R4M air-to-air rockets with launchers to be mounted under the wings and W.Gr 21 air-to-air rocket-launchers to be assembled under the nose are part of the kit. Nose wheel well comes as a die-cast weight. A pilot figure and decals for 4 different markings are included in the kit.
This product was added to our catalog on May 14, 2021
TAM74548, Tamiya Spray-Work Airbrush Cleaning Kit
The Tamiya Spray-Work Airbrush Cleaning Kit helps keep your Tamiya Spray-Work series airbrush is squeaky clean and in peak condition. Perfect for cleaning openings both narrow and wide, the included brushes ensure that paint does not clog up the inner workings of the airbrush such as the nozzle and needle, in addition to the paint cup. Also included are high-viscosity grease and sealant to combat air leakages during use, plus a wrench which can be used to remove the nozzle from all of Tamiya's Spray-Work airbrush products.
Features:
Extra-Fine Brush: Features durable PBT bristles and an easy-to-handle stainless steel wire stem. It’s ideal for cleaning narrow spaces such as the airbrush nozzle.
Standard Brush: Utilizes PBT bristles and a stainless-steel stem with grip. Efficiently cleans the paint cup after use.
Sealant tub: The sealant ensures that air does not escape from any gaps at the base of the nozzle. It does not solidify, allowing cleaning and reapplication as necessary.
High-viscosity grease tub: This grease is for use in maintenance of the trigger button stem, its viscosity ensures smooth and controlled movement of the trigger and paint application.
Nozzle wrench: This wrench is compatible with all Spray-Work series airbrushes, and is used to remove the nozzle without damage.
Includes:
(1) Extra-Fine Brush (Brush: 12mm length x 2mm dia.; total length: 100mm)
(1) Standard Brush (Brush: 12mm length x 7mm dia.; total length: 100mm)
(1) Sealant tub (Contents: 3g)
(1) High-viscosity grease tub x1 (Contents: 7g)
(1) Nozzle wrench
This product was added to our catalog on April 30, 2021
TAM78019, 1/350 JAPAN NVY SUB I400
1/350 Ship Series No.19Japanese Navy Submarine I-400Item No: 78019
1/350 Ship Series No.19Japanese Navy Submarine I-400Item No: 78019Length: 348.5mm. Image shows assembled and painted kit.
The World's Largest "Submarine Carrier"The I-400 was a submarine the likes of which the world had never seen before. At the time of their completion, the I-400 and her sister ships were the largest, and arguably the most advanced submarines in the world. With a 122m length, 12m width, and 6,560 ton displacement, their size rivalled that of destroyers of the time and their amazing endurance could allow them to traverse the globe one and a half times. Loaded with three Seiran bombers, a planned attack on the Panama Canal was only moments away from reality. Diverted to attack the gathering Allied invasion fleet at Ulithi, the war ended before the submarines could launch their strike. However, the I-400 class submarines' technological advances were recognized and it can be said that they helped influence the development of nuclear ballistic submarines after the war.
I-400 Specifications●Displacement: 6,560 tons ●Length: 122m ●Width: 12m ●Top Speed: (Surfaced) 18.7 knots (Submerged) 6.5 knots ●Armament: 53cm torpedo tube (x8), 14cm gun (x1), triple 25mm gun mount (x3), single 25mm gun mount (x1) ●Aircraft: Seiran attack plane (x3)
■Foldable CraneCrane can be posed in both extended and stored positions even after assembly. Crane arm and hook are depicted by precision photo-etched parts.
■Hangar DoorHangar door can be posed in both opened and closed positions. Inner part of hangar door details, as well as propellers and trolleys for the Seiran aircraft are all depicted by photo-etched parts.
■Conning TowerConning tower bristles with antenna and snorkel details, as well as the single 25mm gun mount. Periscope can be modeled in up or down positions.
■Triple 25mm AA GunsThree triple-mount 25mm AA guns feature meticulous detail thanks to the use of advanced laser processing techniques.
■Stern AreaThe submarine's screw propellers are also highly detailed, and the rudder is installed via polycap, allowing it to be fully movable.
■Bow AreaThis area shows the 8 torpedo tubes and the diving planes, which can be modeled in the extended or retracted positions.
■Hangar InteriorJust like the actual submarine, 3 Seiran aircraft with wings folded can be stored inside the hangar.
■Photo-Etched PartsA full set of photo-etched parts including crane arm, various antennae, and Seiran propellers are included with this kit for the most realistic finish possible.
About the Model●1/350 scale assembly kit model. ●Length: 348.5mm ●Hull comprised of upper and lower sections for ease of assembly. ●Hangar features realistic interior details and can store 3 Seiran aircraft. ●Parts included for 2 Seiran aircraft with wings extended, which can be posed on the catapult or on the included display stand. ●Large set of precision-made photo-etched parts included for the ultimate finish. ●Features such as the crane and antennae can be posed in extended or retracted positions. ●Includes special display stand.
The information on this page is current as of June 29, 2007. Specifications are subject to change without notice.
