AXI234007, Axial Capra 1.9 Steering Servo Arm & Inserts
This is a replacement set of Axial Capra 1.9 Steering Servo Arm & Inserts, intended for use with the Capra 1.9 Unlimited Trail Buggy Kit.
This product was added to our catalog on October 4, 2021
HRAMXX48SH25, Hot Racing Aluminum Fixed Steering Link w/25T Servo Arm
The Hot Racing Aluminum Fixed Steering Link is a machined aluminum option to replace the link included with Traxxas TRA7747, and the horn is compatible with the Traxxas TRA2085X servo.
TECH NOTE: This is only compatible with the Traxxas TRA2085X Servo and does not feature a standard 25T spline diameter. For users with a standard size 25T servo please use (HRAMXX48SA25).
Features:
CNC machined 6061 aluminum for stronger, more precise steering
Clamping servo horn gives precise fit to lock onto servo spline
Steel pivot balls
Blue and black anodized
Replaces TRAXXAS servo horn and steering link TRA7747
Fits Traxxas TRA2085X servo
Includes:
(1) aluminum fixed link steering
(1) aluminum locked servo arm
This product was added to our catalog on December 16, 2021
PTK-7800-BK, ProTek RC 4mm Aluminum Long Clamping Servo Horn (Black) (25T)
This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances of finishing the race! Additionally, the arm is 4mm thick for durability, has 19.75mm & 24.25mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles.
Features:
Clamp design
19.75mm & 24.25mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
4mm thick arm
35.5mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Orion/Savox/ProTek Output Shaft
This product was added to our catalog on December 16, 2021
PTK-7805, ProTek RC Aluminum Servo Horn (25T-Futaba, Orion, Savox and ProTek)
This is a ProTek R/C Aluminum Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a 3mm thick arm for durability, has 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles.
Features:
19mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
3mm thick arm
27.25mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Orion/Savox/ProTek Output Shaft
Note: Due to manufacturer tolerances, this servo horn may be a tight fit with certain servo brands.
This product was added to our catalog on December 16, 2021
PTK-7808, ProTek RC 4mm Aluminum Short Clamping Servo Horn (Blue) (25T)
This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. This horn features a clamp type design that grips the servo’s output shaft with enough force that even if the retainer screw comes loose, the horn will remain in place, increasing your chances of finishing the race! Additionally, the arm is 4mm thick for durability, has 15mm and 19mm hole spacing and uses 3mm hardware to suit the geometry and hardware requirements of most vehicles.
This servo horn is an excellent upgrade for any Axial rig that uses the Axial AXI30836 servo horn, including the SCX10 II, RR10 Bomber, Wraith and Yeti vehicles. The horn is identical in size and specifications to the Axial AXI30836 servo horn, but the ProTek uses larger 2.5mm clamp screws, compared to the smaller 2mm clamp screws included with the Axial horn.
Features:
Same hole positions and overall dimensions as Axial AXI30836 servo horn! But ProTek uses larger 2.5mm clamp screws instead of the smaller 2mm clamp screws included with the Axial horn.
Clamp design
15mm and 19mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
4mm thick arm
30.5mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline Futaba/Orion/Savox/ProTek Output Shaft
This product was added to our catalog on December 16, 2021
PTK-7819, ProTek RC Aluminum Clamping Servo Horn (Blue) (25T-ProTek)
This is replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place, increasing your chances of finishing the race! Plus, the horn has a 3.5mm thick arm for durability, with 16.5mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware requirements of most vehicles. Package includes one blue anodized servo horn, 3x10mm button head screw, 2x7.5mm clamp screw and a star lock washer.
Features:
Clamp design
16.5mm and 20mm hole spacing (measured from output shaft screw hole, to linkage rod holes, center to center)
3.5mm thick arm
31mm Overall length
Linkage holes threaded for 3mm hardware
25T Spline ProTek Output Shaft
This product was added to our catalog on December 16, 2021
RER19685, Redcat RDS Aluminum Servo Horn (25T) (Black)
Redcat 25T Aluminum Servo Horn. Constructed from high quality CNC-machined aluminum, this optional servo horn is intended for the Hexfly Drift Spec Servo or aftermarket servos with 25T spline. Package includes one aluminum servo horn.
This product was added to our catalog on July 11, 2023
RER31526, Front Lower Suspension Arms (Aluminum)(1pr)
Front Lower Suspension Arms (Aluminum)(1pr)1mm narrower than stock plastic arms.Features new lower shock mounting positions for suspension tuning and increased clearance.
This product was added to our catalog on July 11, 2023
RER31528, Front Knuckles w/ Steering stops (Aluminum)(1pr)
Front Knuckles w/ Steering stops (Aluminum)(1pr)4mm shorter height wise than stock plastic, must run a 2mm spacer under each ball stud to match standard geometry.Includes 1 left knuckle, 1 right knuckle, 2 steering stops, and 4 2mm spacers.
This product was added to our catalog on March 13, 2024
RER31529, Spur Gear Adapter (Aluminum)(1pc)
Spur Gear Adapter (Aluminum)(1pc)
Lightweight spur gear adapter that allows use of aftermarket spur gears.
This product was added to our catalog on March 13, 2024
RERHX-SP3011, REDCAT RACING PZ 30KG WATERPROOF SERVO
This is a Redcat Racing part #HX-SP3011. PZ 30KG Servo (Waterproof)
This product was added to our catalog on March 13, 2024
TRA5669, Traxxas Locking Differential Servo Horn w/Built-In Spring & Hardware
Shift servo horn with built-in spring tensioner
This product was added to our catalog on September 7, 2021
TRA8247X, Traxxas TRX-4 Metal Steering Servo Horn
Traxxas TRX-4 Metal Steering Servo Horn. This is the optional sintered metal servo horn. Package includes one horn and one 3x14 button head screw.
This servo horn is compatible with any standard servo featuring a 25 tooth spline.
This product was added to our catalog on September 7, 2021
TRA9748-ORNG, Traxxas TRX-4M Aluminum Steering Link w/Servo Horn (Orange)
Traxxas Steering Link 6061-T6 Alum Orange
This product was added to our catalog on October 3, 2022
