Products
$24.99
Serpent America ENN12AR25P, 1/12 Carbon On-road Rear (sh25)
1/12 Carbon On-road Rear (sh25)
$19.99
Serpent America ENN12AR28R, 1/12 Carbon On-road Rear (sh28)
1/12 Carbon On-road Rear (sh28)
$19.99
Serpent America ENN12MR25W, 1/12 Carbon Carpet Rear (sh25)
1/12 Carbon Carpet Rear (sh25)
$19.99
Serpent America SER400007, Serpent S411 190mm Ready-to-Race
SER400007, Serpent S411 190mm Ready-to-Race This is the Serpent S411 1/10 Scale Ready-To-Run Electric Touring Car, with an included 2.4GHz Radio System. The Serpent S411 ready-to-race offers a complete package to enjoy running anywhere outdoors on even surfaces, parking lots or even join any indoor or outdoor race. Based on the successful 411 race cars, this 190mm Serpent touring car is factory assembled and includes a painted body, race tires and wheels, a Dragon-RC 9T brushless motor and a Dragon-RC 35Amp ESC. This full package is a great start for anyone to get racing in the electric touring car category or just race anywhere for fun. Features: Chassis: This super narrow, symmetrical, durable black glass-fiber chassis plate features an optimized flex design, countersunk holes, central section holes all perfectly in center and pockets for the gear differential, spool and spur. Top Deck: Durable black glass-fiber top deck with optimized flex design. Battery-Mount Brackets and LiPo-Holders: Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The LiPo holders will securely keep the LiPo in place, also during hard impacts. Servo-Mount: The servo is mounted on a separate plate, so flex is less influenced. Front Shock Tower: Black glass fiber shock tower with 3 upper shock mounting holes to choose from. Holes for an extra central body post are made as well. Front Bracket: Machined aluminum front brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon. Front Suspension: Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted optionally. C-Hub / Steering Block: The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheel guidance without chatter. Rear Shock Tower: Black glass fiber shock tower with 4 upper shock mounting holes to choose from. The rear body posts are mounted to the top of the rear shock tower. Rear Bracket: Machined aluminum rear brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR and split type 0.0 blocks RR FR Rear Suspension: Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as optional. Rear Upright: Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels. Motor Mount: Machined aluminum motor mount and middle shaft support. Middle Shaft: Ball raced middle shaft with 2 small pulleys and the main Serpent spur gear. Bumper: Large foam front bumper captured by an upper and lower nylon bumper Body Mount: Front body mount is mounted through the front bumper, and the rear ones are seated on the shock tower. Multiple body position holes to choose from. Gear-Differential: Very compact ball raced gear differential in the rear, with steel gears and axles for durability and super smooth operation. Spool: Front nylon lightweight spool with screw mounted front gear pulley Transmission / Belts / Pulley: Smooth low friction fine pitch belts combined with optimized nylon pulley’s Driveshaft / Wheel Hex / Wheel Axle: Steel driveshafts, combined with ball raced wheel axles and nylon wheel-hex adapters. Steering System: Steering system with optimized ackermann for neutral steering-feeling. Shock Absorbers: Latest type RCM competition shock absorbers with membranes and checked color coded race springs. Ball-Bearings: Fully ball raced with oiled high speed sealed stainless steel bearings. Tires & Wheels: The 411-RTR is fitted with Dragon-RC rubber racing tires with foam inlays on Serpent TC wheels for super-grip. Body: The EFRA approved 1/10 scale Serpent TC body is fitted, fully pre-cut and pre-painted in a superb paint job with 4 colors. Manual & Decals: Full color owner’s manual with info on the car and electronics, has all exploded views for easy parts-finding and detailed list with spare parts and optional parts. Decal-sheet with Serpent and 411 logo’s are included as well. Packing: The 411 RTR comes in a strong carton box with full color printing. Optional Parts / Upgrading: The Serpent 411 Sport is based on the high end race version of the 411. All parts from the 411 race-version and also the optional parts fit the 411 Sport. This allows you to upgrade your 411 Sport to a higher level race spec vehicle. The 411 Sport parts manual shows those parts, and you can find them in the optional section of the 411 Sport as well. Specifications:Class: 1/10 Scale 190mm ElectricWheelbase: 254mm +/- 4mmTrack-width Front: 190mm /- 6mmTrack-width Rear: 190mm /- 6mmESC: Dragon-RC 35Amp ControllerMotor: Dragon-RC Brushless 9 Turn, Non-sensoredServo: Dragon-RC Digital Servo (0.13 sec - 6kg) Includes: S411 Touring Car Dragon-RC Brushless 9 Turn Motor Radio System (Transmitter may look different than the item shown in photos) Dragon-RC 35Amp ESC 4 Color Painted Body Tires/Wheels Needed To Complete: (4) "AA" Batteries LiPo Battery Pack Compatible Battery Charger Note: The pictured transmitter may not represent the transmitter included with this vehicle. Serpent selects transmitters based on availability at the time of packaging. This product was added to our catalog on August 4, 2022
$337.50
Serpent America Serpent F110 SF4 1/10 Competition F1 Chassis Kit (SER410067)
This is the Serpent F110 SF4 1/10 Competition F1 Chassis Kit, the next evolution of the Serpent F110 platform that takes F1 1/10 racing to new levels of performance. The F110 SF4 is based on the racing experience gained over the last 2 years of racing IDFM, ETS, TiTC, CETC and races all over the world. Made by racers for racers. NOTE: Painted body, electronics, wheels and tires are shown in photos for reference only. These are not included in the kit and must be purchased separately. See needed to complete list below for a full list of items required to complete the model. Features: Innovative design for the rear pod with side bearings in linear guides replacing the side links The roll motion is completely linear and independent, making the cornering completely independent from accelerating or braking Lipo longitudinal or Lipo transversal with narrow chassis design Side bearing design allows the use of both inline and cross lipo orientation while keeping a narrow chassis design Special holders for lipo's Special electronics holders included in the kit for both configurations Full strength top-deck to prevent longitudinal flex and keep torsional flex on a reasonable level Lipo can be exchanged without removing the body 1-screw Lipo mount in all lipo orientations Race-proven and strong front suspension from the F110 SF3 is evolved with more width to increase the stability of the car 2-position servo mounting plate which works as front top-deck at the same time, preventing mutual influence between longitudinal chassis flex and steering Wing mount which is independent of the rear pod movement Double short tube system for the rear roll damping Ultra-low center of gravity rear pod Angled rear plate gives torsional stiffness, protecting the rear shaft and bearings, keeping all masses low in the pod Bulkheads are completely redesigned to keep masses as low as possible Rear shaft mount is completely updated and innovative Ball diff with an additional long-life thrust bearing runs very smooth and allows a strong locking effect Rear shaft with variable diameter Pod Bulkheads completely keyed to the graphite plates to avoid tweak issues Specifications: Weight: 10 lbs Type & Scale: Electric 1/10 F1 Car Includes: F110 SF4 F1 Chassis Kit 600cst Shock Oil 30,000 Diff Fluid Needed to Complete: 3 Channel Radio System w/High Speed Steering Servo 1/10 F1 Tires & Wheels Motor & ESC 4 Cell NiMH, or 1S LiPo Battery & Compatible Charger 1/10 F1 Car Body & Polycarbonate Paint This product was added to our catalog on August 4, 2022
$410.99
Serpent Serpent S120 PRO 2wd 1/12 (SER410007)
This is the Serpent S120 Pro 1/12 Pan Car Kit. This high performance 1/12 scale pan chassis features a host of nicely machined carbon fiber and aluminum parts. After the huge success of the F110 SF4, The step to develop a 1/12th scale car on the same platform was logical. The focus was to make the car easy to work on and durable without sacrificing performance. NOTE: Painted body, electronics, wheels and tires are shown in photos for reference only. These are not included in the kit and must be purchased separately. See needed to complete list below for a full list of items required to complete the model. Features: Updated innovative design for the rear pod with side bearings in linear guides replacing the traditional side-links With the redesigned side-bearing set-up, the roll motion is completely linear and independent, thus the cornering is completely independent from accelerating or braking. Lipo longitudinal or Lipo transversal with narrow chassis design Side bearing design opens the possibility to use both inline and cross lipo orientation while keeping a narrow chassis design. Special holders for lipo cross configuration included in the kit, inline configuration is optional in aluminium and brass. Full strength top-deck to prevent longitudinal flex and keep torsional flex on a reasonable level. Lipo can be exchanged in any configuration without removing the body 1-screw Lipo mount in all lipo orientations. Easy to work on and strong front suspension from the F110 SF4 is evolved for the pan-car specific demands. All screws are easily accessible. Servo mount is adjustable to fit every servo on the correct position. Double short tube system for the rear roll damping Updated ultra-low center of gravity rear pod Angled rear plate gives torsional stiffness, protecting the rear shaft and bearings, while keeping all masses low in the pod. Bulkheads are completely redesigned to keep masses as low as possible while still maintaining strength Rear shaft mount is completely new and innovative. Ride height and wheelbase can be adjusted very precise with shims. Rear carbon shaft with variable diameter, reinforced by an aluminium sleeve at the bearing and where the pin connects the aluminium thread insert with the shaft. Improved shocks are easier to build with bigger piston diameter as the Project 4X, and the Project 4X bleeding hole for easy rebound adjustment Specifications:Type & Scale: Electric 1/12 PancarTrackwidth (Front): 168mmTrackwidth (Rear): 169.5mm Wheelbase: 202mmIncludes: S120 Kit 10,000cst Shock Oil 8,000 Diff Fluid Needed to Complete: 3 Channel Radio System w/High Speed Steering Servo 1/12 Pan Car Tires & Wheels Motor & ESC 4 Cell NiMH, or 1S LiPo Battery & Compatible Charger 1/12 Pan Car Body & Polycarbonate Paint This product was added to our catalog on August 11, 2022
$430.00
Tamiya TAM58613-60A, Tamiya Toyota Supra 1/10 4WD Drift Spec Kit (TT-02D)
This is a Tamiya 1/10 Toyota Supra 4WD TT-02D Drift Spec Kit. One of the most recognized Japanese sports cars around the world is the Toyota Supra. It has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Tamiya brings this well-known machine in the form of a Drift Kit on the TT-02D Drift Spec chassis. The Supra depicted in this kit is that of the Mark IV A80, which ceased to be produced in 2002. TT-02 Drift Chassis Enjoy the thrill of drifting with this specially tuned drift spec version of the TT-02 chassis. The chassis also features drift spec parts such as 24mm width drift tires (fitted to stylish matte-finish metal-plated wheels), and CVA shock units on the 4-wheel double wishbone suspension. Full ball bearings, an aluminum motor heat sink, and a sport-tuned motor come as standard. Of course, the chassis retains the original TT-02's excellent drivability, ease of maintenance, and adaptability.NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Bathtub-type Frame Shaft Driven 4WD Front/Rear 4-Bevel Resin Differentials 3-Piece Steering Tie-Rod 4-Wheel Double Wishbone Suspension Front/Rear CVA Oil Shocks 540 Sport-Tuned Motor Full Ball Bearings Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S) Specifications: Length: 457mm Width: 186mm Height: 125mm Wheelbase: 257mm Tire Width/Diameter (Front & Rear): 24/63mm Gear Ratio: 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) Needed to Complete: 2 channel radio system Steering servo Polycarbonate paint for body 7.2V - 7.4V Battery w/Tamiya Connector (Must use round type battery pack. Square shaped batteries will not fit battery compartment.) Compatible Battery Charger
$256.00$209.99
Tamiya TAM58618, RC Tamiya Monster Beetle 2015
RC MONSTER BEETLE 2015 The Tamiya Monster Beetle was a classic R/C phenomenon from the 1980's. After a long absence it is back as an updated assembly kit ready to traverse back yards across the country. The model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted with big tires for rough-and-tumble off-road fun. This updated version promises to be great fun for both beginners and Tamiya R/C kit veterans alike!
$274.00$192.00
Tamiya TAM58703-A, RC AU TOM'S GR Supra TT02
This R/C model recreates the Toyota GR Supra GT500. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons from 2017 to 2019. With the streamlined car design of the roadgoing GR Supra, this racing car features a carbon monocoque frame, dedicated aerodynamic components and transmission, plus a 2,000cc inline 4-cylinder direct injection turbo-charged engine "RI4AG." The accurately depicted au Tom's GR Supra body is made of polycarbonate and ABS plastic wing and mirror pieces, which sits on top of our most builder user friendly TT-02 entry-level on-road chassis. TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels and slick tires make for a racy finish. Specifications: 1/10 scale R/C model assembly kit. Length: 466mm, width: 188mm, height: 125mm. Wheelbase: 257mm. The body is made of lightweight, rigid polycarbonate with separate polycarbonate front light cases (LEDs are not attachable) and canards. Separate black ABS resin parts realistically depict distinctive side mirrors and a large rear wing. The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability. 12-spoke gun metal wheels are paired with racing slick tires. Includes motor and THW-1060 ESC.
$189.99
Tamiya TAM58719, Tamiya BBX 2WD Off-Road Buggy Kit (BB-01)
TAM58719, Tamiya BBX 2WD Off-Road Buggy Kit (BB-01) Tamiya BBX 2WD Off-Road Buggy Kit BBX 2WD Off-Road Buggy Kit. The RBX BB-01 scale Dune buggy was inspired by Tamiya's back catalog of iconic 2WD off-road buggies. This high performance off-road machine features a redesigned chassis, reminiscent of 1980’s sand rail dune buggies, is a hybrid monocoque-roll cage, and employs rear trailing arm suspension inspired by full-size UTV’s. All this is wrapped in a 0.7mm thick polycarbonate body designed and crafted by the renowned Japanese artist Atsushi Arino, features a classic 1980’s-inspired livery, complemented by retro wheels and tires for a nostalgic touch. Features: Full ball bearings and universal drive shafts TA06 rear ball differential for consistent traction Four-wheel double wishbone suspension system One-piece monocoque frame and roll cage Metal-plated bead lock type wheels are paired with large-diameter tires Removable rear cage for ease of maintenance Specifications: Scale: 1/10 Length: 16.2in (414mm) Width: 9.1in (233mm) Height: 5.3in (136mm) Wheelbase: 11.1in (283mm) Drive: 2WD Power Source: Electric Assembly Level: Kit Includes: (1) Tamiya BBX 2WD Off-Road Buggy Kit (BB-01) Needed to Complete: ESC and Motor (1) 2-channel Transmitter/Radio (1) Low Profile Steering Servo (1) 2S (7.2V-7.4V) Battery (1) Compatible charger Polycarbonate paint for body This product was added to our catalog on August 1, 2023
$255.99
Tamiya TAM58720, Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit
TAM58720, Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit This is the Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit. An upgraded version of the TT-02 Type-S kit Series that comes loaded with Tamiya Hop-up parts, 37mm drive shafts, aluminum propeller shaft and lightweight aluminum joint cups to reduce 7.8g of the weight, making this kit a capable performer out of the box and a great option to start racing! Note: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Included Tamiya Hop-Up options: 37mm Drive shafts for double Cardan joint shafts Carbon fiber damper stays XV-02/TT-02 oil gear differential unit XV-02/TT-02 (39T) front direct coupling set 06 Module (27T) hard-coated aluminum pinion gear TRF419 Suspension upgrade set Aluminum propeller shaft (68T) High speed gear set 5mm Thick clamp type blue aluminum wheel hex TRF damper oil seal Cross joints for low friction assembly universal shafts Short ball connector nuts for TRF dampers Blue 4mm aluminum serrated wheel nut Universal drive shafts to maintain a stable drivetrain regardless of suspension stroke Full ball bearings Independent double wishbone suspension Front direct spool ensures ease of assembly and stable drivability Specifications: Scale: 1/10 Chassis Type: TT-02 Suspension: Independent double wishbone Suitable Terrain: On-Road Drivetrain: 4WD Shaft Driven Includes: (1) Tamiya TT-02 Type-SRX 1/10 4WD Electric Touring Car Kit (1) Carrying case dedicated for the TT-02 Type-SRX chassis Needed to Complete: (1) 2-channel Transmitter/Radio (1) Steering Servo (1) 1/10 Electronic Speed Controller (1) 540 motor, (1) 7.2 - 7.4V battery Compatible charger 257mm Polycarbonate body Polycarbonate paint for body Tires This product was added to our catalog on July 31, 2023
$359.00$289.99
Traxxas TRA9491, Traxxas Gear adapter set, fixed (48-pitch)
TRA9491, Traxxas Gear adapter set, fixed (48-pitch) This product was added to our catalog on January 3, 2024
$7.00
Traxxas TRA9497, Traxxas Drag Slash LED Tail Light Set w/Power Harness (Black)
TRA9497, Traxxas Drag Slash LED Tail Light Set w/Power Harness (Black) Traxxas Drag Slash LED Tail Light Set with Power Harness. This optional LED light set is intended for the Traxxas Drag Slash. Package includes two tail lights, two tail light housings, one tailgate trim set and mounting hardware. This product was added to our catalog on January 3, 2022
$32.00$29.99
Traxxas TRA9497A, Traxxas Drag Slash LED Tail Light Set w/Power Harness (Satin Black Chrome)
TRA9497A, Traxxas Drag Slash LED Tail Light Set w/Power Harness (Satin Black Chrome) Traxxas Drag Slash LED Tail Light Set with Power Harness. This optional LED light set is intended for the Traxxas Drag Slash. Package includes two tail lights, two tail light housings, one tailgate trim set and mounting hardware. This product was added to our catalog on January 3, 2022
$29.99
Traxxas TRA9497R, Traxxas Drag Slash LED Tail Light Set w/Power Harness (Chrome)
TRA9497R, Traxxas Drag Slash LED Tail Light Set w/Power Harness (Chrome) Traxxas Drag Slash LED Tail Light Set with Power Harness. This optional LED light set is intended for the Traxxas Drag Slash. Package includes two tail lights, two tail light housings, one tailgate trim set and mounting hardware. This product was added to our catalog on January 3, 2022
$29.99
Traxxas TRA9497X, Traxxas Drag Slash LED Tail Light Set w/Power Harness (Black Chrome)
TRA9497X, Traxxas Drag Slash LED Tail Light Set w/Power Harness (Black Chrome) Traxxas Drag Slash LED Tail Light Set with Power Harness. This optional LED light set is intended for the Traxxas Drag Slash. Package includes two tail lights, two tail light housings, one tailgate trim set and mounting hardware. This product was added to our catalog on January 3, 2022
$29.99
Xpress XP-10008, Gear Differential Case and Cover
XP-10008, Gear Differential Case and Cover
$6.12
Xpress XP-10009, Gear Differential Bevel Satellite Gears Set
XP-10009, Gear Differential Bevel Satellite Gears Set
$6.12
Xpress XP-10011, Gear Differential Repair Parts
XP-10011, Gear Differential Repair Parts
$4.99
Xpress XP-10022, Gear Differential Set For Xpress Execute GripXero Series
XP-10022, Gear Differential Set For Xpress Execute GripXero Series
$34.84
Xpress XP-10052, Kevlar Drive Belt Rear 3 x 189 mm
XP-10052, Kevlar Drive Belt Rear 3 x 189 mm
$5.94
Xpress XP-10053, Spur Gear 64P 116T
XP-10053, Spur Gear 64P 116T
$3.18
Xpress XP-10104, Aluminum Front One Piece Upper Clamp For Execute Series
XP-10104, Aluminum Front One Piece Upper Clamp For Execute Series
$31.78
Xpress XP-10111, Aluminum Dual Servo Saver Steering Arm 2pcs
XP-10111, Aluminum Dual Servo Saver Steering Arm 2pcs
$18.34
Xpress XP-10113, Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm
XP-10113, Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm This is Xpress Execute XQ1 XQ1S XQ2S FT1 FT1S FM1S Aluminium Steering Plate For Dual Servo Saver 4mm, genuine official replacement part from Xpress. This product was added to our catalog on December 30 , 2023
$14.99
Xpress XP-10114, Xpress Aluminum FF Lower One Piece Suspension Mount
XP-10114, Xpress Aluminum FF Lower One Piece Suspension Mount This product was added to our catalog on April 10, 2023
$13.99
Xpress XP-10121, 5.5mm Pivot Ball 8Pcs
XP-10121, 5.5mm Pivot Ball 8Pcs
$15.16
Xpress XP-10125, Aluminum Gear Diff Outdrive Adaptor 2pcs For Execute GripXero Series
XP-10125, Aluminum Gear Diff Outdrive Adaptor 2pcs For Execute GripXero Series
$15.64
Xpress XP-10128, DRIVESHAFT PROTECTOR BLADE
XP-10128, DRIVESHAFT PROTECTOR BLADE Feature: For: Xpress Execute XQ1 XQ10 XQ10F XM1 FT1 XQ1S XQ2S XM1S FT1S FM1S DR1S, GripXero D1 Material: Thermoplastic Color: White Include: Driveshaft Protector Blades (8 pcs) This product was added to our catalog on October 20, 2023
$6.99
Xpress XP-10129, 12mm Aluminum Wheel Hex 5mm Red 2Pcs
XP-10129, 12mm Aluminum Wheel Hex 5mm Red 2Pcs
$11.00
Xpress XP-10139, Xpress 3.0mm Suspension Pivot Pin
XP-10139, Xpress 3.0mm Suspension Pivot Pin This product was added to our catalog on May 8, 2023
$5.49
Xpress XP-10156, Steel Turnbuckle 29mm 4pcs
XP-10156, Steel Turnbuckle 29mm 4pcs
$10.00
Xpress XP-10157, Steel Steering Turnbuckle Set
XP-10157, Steel Steering Turnbuckle Set This product was added to our catalog on May 8, 2023
$11.49
Xpress XP-10163, Composite Servo & Horn Belt Tensioner Set
XP-10163, Composite Servo & Horn Belt Tensioner Set
$4.88
Xpress XP-10166, Steel Double Joint Universal Shaft 2pcs
XP-10166, Steel Double Joint Universal Shaft 2pcs
$31.28
Xpress XP-10168, SOFT SPRING PAIR BLACK
XP-10168, SOFT SPRING PAIR BLACK Feature: For: Xpress Execute XQ1 XQ10 XQ10F XM1 FT1 XQ2S Material: Steel Color: Black Include: Spring (2 pcs) This product was added to our catalog on October 22 , 2023
$4.99
Xpress XP-10179, Gear Differential Gasket 5pcs
XP-10179, Gear Differential Gasket 5pcs
$5.86
Xpress XP-10192, Xpress Execute Aluminum Adjustable Battery Stoppers For Execute Series
XP-10192, Xpress Execute Aluminum Adjustable Battery Stoppers For Execute Series This product was added to our catalog on December 30, 2023
$23.99
Xpress XP-10220, Camberlink Stiffener Set
XP-10220, Camberlink Stiffener Set
$22.00
Xpress XP-10222, Xpress Graphite Option Steering Knuckle Plate
XP-10222, Xpress Graphite Option Steering Knuckle Plate Change to this graphite steering plate which offers a stiffer steering structure which in return gives you a sharper steering response and feeling! You will need to install a 2mm bumpsteer shim to get the same amount of bumper steer as the stock steering plate. Feature: For: Xpress Execute XQ1 XQ10 XQ10F FT1 XQ1S XQ2S FT1S Material: Graphite Color: Black Includes: Graphite Option Steering Knuckle Plate (2 pcs) This product was added to our catalog on October 20, 2023
$17.99
Xpress XP-10236, 4.8mm Ball 5mm Thread 4pcs
XP-10236, 4.8mm Ball 5mm Thread 4pcs
$6.36
Xpress XP-10239, 4.8mm Ball 10mm Thread 4pcs
XP-10239, 4.8mm Ball 10mm Thread 4pcs
$6.36
Xpress XP-10242, Brass Chassis Balancing Weights 10g 5g 4pcs For Execute Touring
XP-10242, Brass Chassis Balancing Weights 10g 5g 4pcs For Execute Touring
$36.66
Xpress XP-10244, Xpress Steel Universal Shaft 2pcs For Execute XQ1S XQ2S FT1S DR1S
XP-10244, Xpress Steel Universal Shaft 2pcs For Execute XQ1S XQ2S FT1S DR1S This product was added to our catalog on November 21, 2023
$13.00
Xpress XP-10251, Xpress 4.8mm Low Profile Ball End 15mm 4pcs
XP-10251, Xpress 4.8mm Low Profile Ball End 15mm 4pcs This product was added to our catalog on May 8, 2023
$4.99
Xpress XP-10253, 4.8mm Low Profile Ball End 10mm 4pcs
XP-10253, 4.8mm Low Profile Ball End 10mm 4pcs
$3.66
Xpress XP-10254, 4.8mm Low Profile Ball End Set
XP-10254, 4.8mm Low Profile Ball End Set
$15.16
You have seen 48 out of 104 products