Both the full adapter and PCBA only are Beta FPV's most recently updated versions.
With the use of micro to nano module adapter, a nano tx module can work on transmitters with JR module bay (aka Micro module port) easily!
The Micro to Nano Module Adapter (PCBA) is available for those who can print the case for themselves. You can download the adapter case STL file on Beta FPV's technical support page.
This adapter is a perfect match for the BetaFPV Nano ELRS module in either 900MHz or 2.4GHz!
Check out our RC Transmitters and all our BetaFPV products!
Specifications
Input: JR module bay (Micro module bay)
Output: Nano module bay (Lite module bay)
Supported Radio Transmitters: Frsky X9D/X9D Plus/X12S/X10/X10S/X7/X7S,
Flysky TH9X, Turnigy 9XR/9XR PRO, FUTABA 16IZ, Jumper T16/T18/T18 Pro,
Radiomaster TX16S/TX18S, TBS Mambo
Supported TX Modules: BETAFPV Nano TX Module, TBS Crossfire Nano TX、Frsky XJT Lite/R9M Lite/R9M Lite Pro.
Dimensions: 65x48x28mm
Weight: 24.8g
Includes
1x Micro-Nano Module Adapter or PCBA
1x Converter cable
Based on ELRS V3.3 and collaborated with ELRS developer team, the First Ever Gemini Dual-Frequency Diversity Transmitter comes out! At present, SuperG Nano Transmitter can be fully activated to achieve the best link quality ever combined with diversity rx such as SuperD receiver or SuperP receiver. With dual 1W transmit power, it excels in anti-interference performance and stability, making it the ideal solution for demanding applications like FPV racing, long-range flight, and professional photography.
Check out our RC Transmitters and all our BetaFPV products!
Features
Introducing the pioneering Gemini Dual-Frequency Diversity Transmitter, propelling ELRS into the era of dual-frequency capabilities.
Dual 1W transmit power experienced amplified signal strength, expanded transmission distances, and a substantial increase in remote control range.
In conjunction with existing true diversity receivers, activating the Gemini mode ensures unwavering signal stability even in the most intricate radio environments.
Meticulously crafted from CNC aluminum alloy, the transmitter casing facilitates efficient thermal conductivity, complemented by an intelligently designed Heatsink system for optimal heat dissipation.
Featuring 2 customizable buttons and 1 USB port, the transmitter accommodates external power sources, enabling steadfast long-range expeditions.
Diagram
Below is the diagram for the SuperG Nano Transmitter.
Note: Please assemble the antenna before powering on. Otherwise, the PA chip in the SuperG Nano Transmitter will be damaged permanently.
The following is the comparison information of the 3 products SuperG Nano Transmitter, ELRS Nano TX Module and ELRS Micro TX Module. It shows the advancing updates and specifications more than ever.
SuperG Nano TX
Nano TX
Micro TX
Max RF Power
Dual-1000mW
500mW
500mW/1000mW
RF Chip
Dual SX128x
Single SX128x
Single SX128x
Antenna Mode
Gemini
Single
Single
Cooling System
Supported
Unsupported
Supported
Backpack
Supported
Unsupported
Supported
External Power Supply
Supported 7-13V
Unsupported
Supported 5-12V
Know More About Diversity&Gemini
Antenna Diversity mode, two antennas. Switch the two antennas regularly to read the RSSI value of the signal and determine which antenna to use to receive data.
True Diversity mode, where both antennas receive data at the same frequency, and the antenna that receives the correct data first is used.
Gemini mode, where two antennas simultaneously receive telemetry data with a frequency difference of 40MHz. They also transmit data simultaneously but at different frequencies. This means that you can receive the same data packets on different frequencies and antennas. This mode provides stable flight even in complex radio environments.
Among them, Gemini is the most advanced function yet of ExpressLRS - Gemini mode currently! It owns the most stable mode for receiving signals and offers higher resistance to interference and stability, making it suitable for various applications.
SuperG Nano Transmitter features Gemini mode. In a testing video by developer Jye Smith, it is shown that with a refresh rate of 1000Hz, the LQ value fluctuates between 90-100 when the true diversity receiver is in operation. However, after switching to Gemini mode, the LQ value stabilizes at 99-100. This demonstrates that ELRS goes to great lengths to ensure link stability.
Combination with Diversity RX
Gemini mode is built upon the hardware foundation of true diversity receivers and requires a dual RF output high-frequency module. When used with Super series products, the advantages of Gemini mode can be fully utilized. And The effects of using the transmitter and receiver in various modes are as follows:
TX
RX
Antenna Receiving Mode
ANT1/ANT2/Switch
Single
Single
Diversity
Diversity
Gemini
Single
Gemini
Single
Single
Diversity
Diversity
Gemini
Gemini
Using it together with True Diversity Receiver ensures a super stable yet strong radio link for pilots to fly in any environment that require extremely stable signals and low latency. Including long-range flights, multiplayer flights, and FPV racing. It gives pilots a robust and aggressive flight experience.
Dual 1W Output Power
The SuperG Nano Transmitter with Dual-active Antennas@Dual Frequencies, each boasting a powerful 1W transmission power. Experience stronger signals, longer transmission distances, and enhanced remote control range.
Cooling System Iteration
The casing part is made of CNC aluminum alloy with an anodized surface for durability. It efficiently dissipates heat, thanks to its optimized internal airflow and high-speed fan with copper heat fins. Fly with confidence and enjoy reliable performance every time.
Combination with Most Radio TX
The SuperG Nano Transmitter could be configured via LUA script. EdgeTX and OpenTX radio transmitter that supports CRSF could be used easily. It available for popular Nano interface TX when used with Micro-Nano Module Adapter including Radiomaster TX16, Boxer, Zorro. Jumper T16, T20, T Pro. Frsky QX7, X9, X Lite.
Note: LiteRadio 3 Pro Radio Transmitter cannot support dual transmitter power above 100mW due to power supply issues.
Express Yourself in Vibrant Colors
SuperG Nano Transmitter is a cutting-edge device that offers a distinct and personalized flair, with a range of three vibrant color options including red, grey, and black. The combination of its sleek design, superior functionality, and colorful choices perfectly caters to those who seek elevate style and performance.
ELRS Series
The ExpressLRS Series expands its lineup with the addition of SuperG Nano Transmitter. To achieve exceptional link quality, pair the Gemini TX with Super series diversity receivers. BETAFPV takes the flying experience to new heights by introducing ELRS links that offer long-range capabilities, low latency, and high refresh rates in a radio control system.
Basic Configuration
SuperG Nano Transmitter is designed to receive signals using the Crossfire Serial Data Protocol (CRSF). Therefore, the interface of the transmitter's high-frequency module needs to support CRSF signal output. Taking the EdgeTX transmitter system as an example, we will explain how to configure the transmitter to output CRSF signals and control the transmitter using Lua scripts.
In the EdgeTX system, navigate to MODEL SEL and enter the SETUP menu. Disable Internal RF (set to OFF), enable External RF, and set the Output Mode to CRSF, as shown in the picture below.
Lua scripting is a lightweight and compact scripting language that can be embedded in the transmitter for convenient access to and modification of the transmitter's configuration.
Download the elrsV3.lua script from the BETAFPV Support Center or ExpressLRS Configurator.
Copy the official Lua script, elrsV3.lua, to the SD card of the transmitter, under the path Scripts/Tools.
On the EdgeTX system, long-press the SYS button or MENU button to access the SD-HC CARD menu.
In this menu, select the elrsV3.Lua script and run it.
If the Lua script runs successfully, the interface will appear as shown in the illustration below.
Custom Buttons
SuperG Nano Transmitter reserves 2 buttons that can be customized by users. Here are the specific steps to operate:
Enable the transmitter's WiFi or power it on and wait for 60 seconds to enter WiFi mode using LUA programming.
The RGB indicator light will slowly flash in green, indicating that the transmitter has automatically enabled WiFi (WiFi name: ExpressLRS TX, WiFi password: expresslrs).
Connect your smartphone or computer to the WiFi network and open a web browser. Enter http://10.0.0.1 to access the custom button settings page.
In the corresponding button's Action column, select the desired custom function. Then, choose the button type and the number of presses or duration in the Press and Count columns. Click SAVE to complete the settings.
Currently, there are 6 available functions that can be assigned to shortcut buttons. There are 2 ways to use the buttons: long-press and short-press. The duration of a long press can be customized, while the number of presses for a short press can also be customized.
The following are the 6 functions that can be set:
Unused
VTX Setting
Increase Output Power
Enable WiFi
Enter VTX Channel
Enter Binding Mode
Enter VTX Band
The pictures below show the functionality of the transmitter in its factory default settings. (The left button is Button1 and the right button is Button2).
Button
Action
Press
Count
Button1(Left Button)
Enter Binding Mode
Short Press
3 Times
Increase Power
Long Press
For 0.5 seconds
Button2(Right Button)
Go to VTX
Channel Menu
Short Press
2 Times
Send VTX Settings
Long Press
For 0.5 seconds
Note: This transmitter hardware does not support button RGB lights.
Bind & External Power Supply
The SuperG Nano Transmitter utilizes the default firmware, which employs the ExpressLRS V3.3.0 official protocol without a Binding Phrase. Consequently, the binding receiver should also be equipped with firmware V3.0.0 or higher and have no Binding Phrase set. For optimal performance, it is recommended to position the transmitter's two antennas as far apart as possible.
Put the receiver in a bound state and wait for connection.
Click the "Bind" in the Lua script or the set custom button to enter the binding mode.
If the Indicator has turned solid, it indicates that the device has been bound successfully.
Note: If the firmware of the TX is reflashed and the Binding Phrase is configured, you cannot enter the Binding state through the above method. Please set the RX to the same frequency Binding Phrase, and the TX and RX can be connected automatically.
When the dual transmit power exceeds 500mW, the SuperG Nano Transmitter exhibits relatively high power consumption, leading to a reduced battery life. To prolong the transmitter's usage time, it is advisable to utilize an external battery as a power source.
The power consumption of the transmitter is not only related to the transmit power but also to the telemetry ratio. When using high power of 500mW and above, the return ratio can be set higher to reduce power consumption and extend use time.
For example, in Gemini mode, the power consumption of setting the return ratio to 1:128 is 1000mA, while the power consumption of setting the return ratio to 1:2 is only half of 1:128.
Note: When the voltage of the radio transmitter battery or external battery is lower than 7V (2S) or 10.5V (3S), please use the Gemini mode of 500mW and 1W carefully, otherwise the transmitter will enter the restart state due to insufficient power supply, resulting in disconnection out of control.
FAQ
When establishing a link, it is not possible to enter the LUA script.
The ELRS LUA script version is outdated and requires an upgrade to elrsV3.lua.
The baud rate of the radio transmitter is set below 400K, and it should be adjusted to a value above that.
If there is no option to modify the baud rate, it is necessary to update the radio transmitter firmware, ensuring that EdgeTX is at version V2.7.0 or newer.
If your radio transmitter is unable to use the F1000 Packet rate or prompts "Baud rate is too low".
Reason: F1000 requires a baud rate higher than 400K, and the radio transmitter's baud rate is 400K by default.
Solution: First update the baud rate (greater than 400K) setting in the Hardware from the Model Setup menu or System menu, then restart the radio transmitter to ensure the baud rate setting has been applied. Then change the Packet rate.
When the F1000 is turned on, the Packet rate between the radio transmitter and the SuperG Nano Transmitter is less than 1000.
Reason: EdgeTX version problem
Solution: The EdgeTX version needs to be upgraded to 2.8.0 or above. And the LiteRadio 3 Pro Radio Transmitter defaults to EdgeTX 2.8.0 and does not have this problem.
The SuperG Nano Transmitter's default firmware is ELRS V3.3.0, and users need to update the receiver to V3.0.0 or above to bind the frequency.
Download the Instruction Manual for the SuperG Nano Transmitter
Download the firmware for the SuperG Nano Transmitter
Download the Backpack firmware for the SuperG Nano Transmitter
Download the STL File for the SuperG Nano TX Insulated shell
Specification
Item: BETAFPV SuperG Nano Transmitter Module | ELRS 2.4G
Weight: 44.8g
Color: Black, Red, Grey
Antenna Connector: 2x RP-SMA
RF Power: 25mw/50mW/100mW/250mW/500mW/1000mW
Packet Rate: 50Hz/100Hz/150Hz/250Hz/333Hz/500Hz/D250/D500/F500/F1000
Frequency Band: 2.4GHz ISM
Backpack: support
Input Voltage: 7V~13V DC
Rated Current: 8V,1000mA@1000mW, 1:128, Gemini mode
USB Port: Type-C
Fan Voltage: 5V
Default Firmware Version: ExpressLRS V3.3.0
Target Name: BETAFPV SuperG Nano 2.4GHz TX
Includes
1x SuperG Nano Transmitter (Black/Red/Grey)
2x 2.4G Glue Stick Antenna
1x USB to Type-C Data Cable
1x Type-C Male to XT30U Male Power Cable
1x GH1.25 Male to FUTABA Male Signal Cable
1x Micro-Nano Module Adapter (Standard Version)
1x Double Side EVA Foam Tape
1x Instruction Manual
1x Service Card
Intended for the first release of the TX16S. Not intended for the MKII version.
Replacement part for the RadioMaster TX16S Multi-Protocol RC Transmitter.
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Includes
1x Faceplate for RadioMaster TX 16S Transmitter
Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This kit from Happymodel is a great combo to start with, it comes with both the receiver and module together. Before you know it, you'll be pushing the limits of what you thought was possible.
Check out our other transmitter modules, as well As the rest of our Happymodel selection!
Features
Compatible with OpenTX remote controllers, including the Radiomaster TX16S and Jumper T12, T16, and T18.
The 900TX module comes with a 2006 fan which allows it to work automatically when the TX power is at 250mW
ExpressLRS open-source software.
Ultra Long Range
Low Latency
Specifications
ES900RX
RF Frequency: optional 915mhz or 686mHz (EU)
Weight: 0.60 gram (excluding antenna)
Telemetry output Power: <17dBm
Operation current: ~100Ma
Antenna connector: IPEX1
Rx To FC protocol: CRSF
Dimension: 12x12x3mm
Input Voltage: 5V
ES900TX
Maximum Output Power: <33dBm (For >27dBm operation, we recommend adding a fan for force cooling)
RF Frequency optional: 915mhz or 868mHz (EU)
Dimension: 55x39x13mm
Input Voltage: 5~13V
Weight: 23g Without Antenna
Antenna Connector: SMA
MCU: ESP32+ESP8285
Includes
1x Happy Model ES900TX & ES900RX Combo for ExpressLRS
The RadioMaster 4IN1 External Nano/JR Module, which is a multi-protocol module that integrates CC2500, NRF24L01, A7105 and CYRF6936 RF chips. This is external nano module can also be used on JR modules, with the included JR adapter.
RM 4IN1 is compatible with more than 70 RF protocols, including DSMX, Flysky, SFHSS, HiTec, HoTT, OMP, Radiolink, Frsky and many more. The module features a +20dBm RF gain, a 2.4GHz frequency band, and an operational voltage of 4.5-8.4V.
Designed for OpenTX and EdgeTX systems, the RM 4IN1 module allows the radio to connect with most mainstream protocols on the market. Though when this module is used in conjunction with a suitable EdgeTX or OpenTX compatible radios such as the TX16s, TX12 or Zorro, the RM 4in1 module can be used as a wireless trainer link to a student radio such as another TX16s, TX12, Zorro or any other radio capable of transmitting DSMX, Frsky or Flysky protocols.
Check out all our RC Transmitters and our entire RadioMaster selection!
Features
Up to 20dBm power output
Compatible with more than 70 RF Protocols
Wireless trainer function
JR adapter is included as standard. Support Zorro, Boxer, TX16S MKII, TX12 MKII and more.
Specifications
Operational frequency: 2.4G ISM band (2400mHz - 2483mHz)
RF Chipsets: CC2500, NRF24L01, A7105 and CYRF6936
Dimension: 73x42x22mm (without antenna)
Weight: 30g (without antenna)
Operational voltage: 4.5-8.4V
Operational current:≈100mA
Item: RM 4IN1 Module
RF Gain: +20dBm
Includes
1x RM 4IN1 Module
1x JR Adapter
1x RP-SMA Stick Antenna
The Moxon directional antenna is intended for long-range and has a more narrow field of operation. It is important to keep the Moxon antenna pointed in the general direction of your aircraft.
Check out all our RC Transmitters and our entire RadioMaster selection!
Specifications
Frequency or Freq. Bandwidth: 2.4GHz
Gain: 5.98dBic
Connection: RP-SMA
Weight: 12g
Includes
1x Radiomaster 2.4GHz Moxon Directional Antenna RP-SMA
The T-Antenna is an omnidirectional antenna. It is intended for short to medium ranges and is suitable for most conditions.
Check out all our RC Transmitters and our entire RadioMaster selection!
Specifications
Frequency or Freq. Bandwidth: 2.4GHz
Gain: 3.43dBic
Antenna polarization: vertical/horizontal polarization
Connection: RP-SMA
Weight: 9.5g
Includes
1x Radiomaster 2.4GHz T Antenna RP-SMA
All orders containing batteries must be shipped via a ground shipping method.
These batteries are designed to be a perfect fit for your Zorro radio and to provide maximum use time!
Check out our RadioMaster selection, as well as our RC transmitters, parts and accessories!
Specifications
Nominal Voltage: 3.7V
Dimensions: 18x35mm
Capacity: 900mAh
Includes
2x RadioMaster 3.7V 900mAh 18350 Li-Ion Battery for Zorro
All orders containing batteries must be shipped via a ground shipping method.
The RadioMaster 5000mAh 2s Li-ion battery pack is the perfect battery for your Radiomaster TX16S. Offering longer run times and safer use when compared to Li-poly batteries. Li-ion batteries typically offer higher energy density and are well suited to lower current draw applications. The RadioMaster 5000mAh battery pack coupled with the internal charging capabilities of the TX16S offers convenience and peace of mind charging for hours of flying enjoyment. This battery also includes an XT30 output plug that is the ideal length for use with external modules.
Check out our RadioMaster selection, as well as our RC transmitters, parts and accessories!
Specifications
Capacity: 5000mAh
Nominal Voltage: 7.4V
Cells: 21700 Li-ion 3.7V 18.5Wh
Connector: JST-XH and XT30
Max Charge Current: 2A
Includes
1x RadioMaster 7.4V 2S 5000mAh Li-Ion Battery for TX16S - XT30
All orders containing batteries must be shipped via a ground shipping method.
The RadioMaster 6200mAh 2s Li-Po battery pack is the perfect battery for your RadioMaster Boxer transmitter. The RadioMaster 6200mAh pack offers convenience and peace of mind when looking for a battery that will work for hours.
Note: Fits RadioMaster BOXER Radio and TX16S series Radio.
Check out our RadioMaster selection, as well as our RC transmitters, parts and accessories!
Specifications
Item: 2S 7.4V 6200mAh LiPo Battery
Capacity: 6200mAh
Nominal Voltage: 7.4V
Watt Hours: 45.88wh
Cells: Li-Po 3.7V 18.5Wh
Connector: JST-XH and XT30
Max Charge Current: 2A
Weight: 203g
Includes
1x RadioMaster 7.4V 2S 6200mAh Li-Po Battery for Boxer / TX16S - XT30
The perfect combination of size and ergonomics make the Boxer an ideal choice for pilots on the go. Featuring full-size hall gimbals for precision control and an intuitive button layout, the Boxer gives you a compact radio without compromising on comfort and function.
EdgeTX Operating System
Preinstalled with EdgeTX, the Boxer has cutting-edge software fit for its class-leading hardware. RadioMaster works closely with the EdgeTX team to develop features and optimize the user experience. We will continue to contribute and support projects like EdgeTX, ensuring the concepts of open standards are carried forward.
Features
Available with built-in ExpressLRS or 4-in-1/CC2500 MPM RF modules
Featuring a powerful STM32VGT6 processor with 1MB RAM
Preinstalled EdgeTX firmware
Internal ELRS module capable of 1,000Hz refresh rate
Adjustable ELRS RF output (30dBm max FCC or 20dBm Max EU LBT)
4-in-1 or CC2500-only version capable of up to 20dBm RF output
QC3.0 fast charging support 2.0A MAX
Compact design with excellent ergonomics
New low-profile latching SE switch and momentary SF switch
Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20 hours duration (Batteries not included)
Full-sized V4.0 Hall effect gimbals as standard, upgradable to AG01 CNC Hall effect gimbals
Standard JR module compartment
Internal module cooling fan built in (ELRS version)
RadioMaster standardized button layout
Versatile 6-position switch for flight mode access
Adjustable and Removable T-shape Antenna
Industry-first fabric handle for improved portability
Changeable, ergonomic grips
Redesigned SD card slot with pre-loaded SD card included
External module power slots in the battery cover
RadioMaster signature carry case and gimbal protector are included as standard to ensure your radio stays safe while on the move
Available with ExpressLRS and 4in1/CC2500 Version
In addition to the popular internal 4-in-1 Multi-module (CC2500, NRF24L01, A7105 and CYRF6936) and the CC2500-only version, the Boxer is now also available with a high-power, fan-cooled, 1W internal 2.4GHz ExpressLRS (ELRS) module. Designed to provide reliable long-distance control, minimal latency, and high refresh rates. ELRS is a revolutionary open-source protocol taking the R/C industry by storm.
Powerful STM32VGT6 Processor with 1MB RAM
Compact Design with Excellent Ergonomics
Radio Overview
Specification
Item: Boxer Radio
Size: 235x178x77mm
Weight: 532.5g
Frequency: 2.400GHz-2.480GHz
Internal RF Options: CC2500 multi-protocol / 4-in-1 multi-protocol / ELRS 2.4GHz
Supported protocols: Module dependent
Transmitting Power CC2500 and 4IN1: Max 20dBm
Transmitting Power ExpressLRS: Max 30dBm (international) / Max 20dBm (EU LBT)
Cooling fan: Built-in (ELRS version)
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / Multi-Module (RF module) / ELRS
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V 18650 Lithium-Ion cells (batteries not included)
Display: 128x64 Monochrome LCD display
Gimbal: High precision 4.0 Hall gimbals as standard (AG01 Optional)
External module: JR/FrSKY/Crossfire compatible
Upgrade Method: USB/SD card & EdgeTX Companion PC software
Includes
1x RadioMaster Boxer Radio
1x Signature Carry Case
1x T Antenna
1x USB-C Cable
1x Gimbal Protector
1x 1.5mm Allen Key
2x M4x4 Screws
4x Low Tension Springs
1x 18650 Battery Tray
1x Stickers
1x Manual
Download
Boxer Radio User Manual
The perfect combination of size and ergonomics make the Boxer an ideal choice for pilots on the go. Featuring full-size hall gimbals for precision control and an intuitive button layout, the Boxer gives you a compact radio without compromising on comfort and function. This version comes with a transparent case and a bonus white LED kit for your gimbles, a great combo for a classy looking transmitter.
Check out our RadioMaster collection and all our RC transmitters!
Features
Transparent case
LED gimbal lights kit included (not installed)
Elevate your control
ExpressLRS 30dBm/1W max
Max F-1000 Refresh rate
Preinstalled with EDGETX firmware
Compact design with excellent ergonomics
Full sized V4.0 hall effect gimbles
Radiomaster standardized button layout
Space for a 2S 6500mAH pack, literally fly all day!
Specifications
Item: Boxer Radio
Size: 235x178x77
Weight: 532.5g
Frequency: 2.400GHz - 2.480GHz
Internal RF: ELRS 2.4GHz
Supported protocols: Module dependent
Transmitter Power: Express: Max 30dBm (International) / 20dBm (EU LBT)
Cooling fan: Built in
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / ELRS (RF module)
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-Cell Lithium Polymer / Two 3.7V 18650 Lithium-Ion cells (Battery not included)
Display: 128x64 Monochrome LCD display
Gimbal: High precision 4.0 Hall gimbals as standard
Upgrade Method: USB / SD card & EdgeTX Companion PC software
Bonus: White gimbal LED set included for optional installation
Includes
1x RadioMaster Boxer EdgeTX RC Transmitter - ExpressLRS 2.4GHz (Transparent)
1x Signature carry case
1x T antenna
1x USB-C cable
1x Gimble protector
1x 1.5mm Allen key
2x M4x4 Screws
4x Low tension springs
1x Stickers
1x Manuals
1x White gimbal LED set
1x 18650 battery tray
The Boxer Max Radio features a carbon fiber pattern case with AG01 hall gimbals, CNC buttons, and a roller for standard use. It also includes an adjustable CNC metal folding handle with upgraded leather grips and a RadioMaster neck strap for added comfort. Experience superior performance with the Boxer Max Radio!
Check out our RadioMaster collection and all our RC transmitters!
Features
Optional 3 colors - Black/Red/Gold
AG01 hall gimbals installed
Carbon fiber pattern case
CNC buttons and roller as standard
Adjustable length CNC metal folding stand
Upgraded black leather grips
Available with built-in ExpressLRS RF modules
Featuring a powerful STM32F407VGT6 with 1MB Flash and 192KB RAM
Preinstalled EdgeTX firmware
Internal ELRS module capable of 1,000Hz refresh rate
Adjustable ELRS RF output
QC3.0 fast charging support 2.0A MAX
Compact design with excellent ergonomics
New low-profile latching SE switch and momentary SF switch
Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20-hour duration (Batteries not included)
Standard JR module compartment
Internal module cooling fan built in (ELRS version)
RadioMaster standardized button layout
Versatile 6-position switch for flight mode access
Adjustable and Removable T-shape Antenna
Industry-first fabric handle for improved portability
Changeable, ergonomic grips
Redesigned SD card slot with new and improved 512mb pre-loaded SD card included
External module power slots in the battery cover
RadioMaster signature carry case and gimbal protector are included as standard to ensure your radio stays safe while on the move.
EdgeTX Operating System and ExpressLRS RF system pre-installed
Preinstalled with EdgeTX and ExpressLRS, the BOXER has cutting edge software fit for its class-leading hardware. RadioMaster works closely with the EdgeTX and ExpressLRS teams to develop features and optimize the user experience. We will continue to contribute and support projects like EdgeTX and ExpressLRS, ensuring the concepts of open standards are carried forward into the future.
Specifications
Item: BOXER Max Radio
Color: Black/Red/Gold
Size: 235x178x77mm
Weight: 532.5g
Frequency: 2.400GHz-2.480GHz
Internal RF: ELRS 2.4GHz
Supported protocols: Module dependent
Cooling fan: Built-in (ELRS version)
Voltage Range: 6.6-8.4V DC
Radio Firmware: EdgeTX (Transmitter) / ELRS (RF module)
Channels: Max 16 channels (Receiver dependent)
Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V 18650 Lithium-Ion cells (batteries not included)
Display: 128*64 Monochrome LCD display
Gimbal: AG01 CNC Hall Gimbal
External module: JR / FrSKY / Crossfire compatible
Upgrade Method: USB / SD card & EdgeTX Companion PC software
BONUS: Radiomaster neck strap and CNC adjustable stand
Includes
1x RadioMaster Boxer Max EdgeTX RC Transmitter - ELRS 2.4GHz - Choose Your Version
1x Signature Carry Case
1x T Antenna
1x USB-C Cable
1x Gimbal Protector
1x 1.5mm Allen Key
2x M4x4 Screws
4x Low Tension Springs
1x Stickers
1x Manual
1x 18650 Battery tray (Batteries not included)
1x RadioMaster Neck Strap
1x Boxer KeyChain
1x Screen Protector
Keep your Zorro safe in style with the official RadioMaster carry case. This compact design case saves on space and looks great. The internal lining is soft and padded to resist scratching and protect the radio. The interior of this case is custom molded to suit the Zorro and will ensure your radio is secure when being transported.
Check out the rest of our RadioMaster selection!
Specifications
Dimensions: 21.5x18.5x12cm
Includes
1x RadioMaster Carrying Case for Zorro
Are 8 switches not enough for you? Are you looking for even more control and customization of your TX16S MKII? Look no further with these buttons directly from RadioMaster!
Make sure to check out the rest of our transmitter accessories and the rest of our RadioMaster gear!
Includes
1x RadioMaster DIY Upgrade Button for TX16S MKII
Wiring Diagram
The RadioMaster ER4 4Ch 2.4GHz ELRS PWM Receiver is designed to provide reliable and flexible control for your models. It has a small volume and drives up to 4 servos simultaneously, making it perfect for small aircraft, ships, and cars.
Check out our RadioMaster selection, the rest of our RC receivers, and all our RC transmitters, modules, and accessories
Features
ER4 Receiver User Manual
Based on the Revolutionary ExpressLRS System
High performance, high reliability, flexible configuration, fast response speed, and ultra-long range
Support 4 PWM Channel
Optimized ground-up PCB design
Automatically voltage telemetry of external battery voltage or built-in receiver voltage
Supports Wi-Fi updates and WEBUI configuration
High-quality 2.54 mm connector
Standard 15 cm High Sensitivity Antenna
For small aircraft, boats and cars, and more
Specification
Item: ER4 2.4GHz ELRS PWM Receiver
Power supply: DC 4.5 - 8.4V
Antenna type: 15cm high sensitivity antenna
Wireless protocol: ExpressLRS 3.3.0 pre-installed
Output channel: 4CH PWM
Telemetry power: 10mw
Battery voltage detection range: DC 4.0- 35V
Weight: 3.0 grams
Dimensions: 30x15x5mm
Firmware: Device Category: Radiomaster 2.4Ghz / Device: RadioMaster ER4 2400 PWM RX
Includes
1x RadioMaster ER4 2.4GHz 4Ch ELRS PWM Receiver
2x Heat-shrink tube
1x Voltage telemetry wire (Type-A)
1x User Card
The RadioMaster ER series of receivers are designed with size, ease of use, and range in mind. Utilizing ExpressLRS 2.4ghz Open-source firmware these receivers deliver features and range today’s pilots have come to expect.
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Features
Supports 8.4V HV servos and accessories
Robust, injection-molded receiver casing
Fast response speeds, incredible range
Supports 4 proportional and 1 switch channel (ExpressLRS 2.x)
Supports 5 proportional channels (ExpressLRS 3.x)
Compact size, easy to install. Perfect for Surface, marine, and air R/C applications.
Specifications
Item: ER5C 2.4GHz Receiver
Power supply: DC 4.5-8.4V
Antenna type: high sensitivity T-shape antenna
Wireless Protocol: ELRS 2.0 pre-installed
Output channel: CH1-4 standard PWM; CH5 switch (ON/OFF) PWM
Weight: 6.6g
Size: 37x19x13mm
Includes
1x ER5A ELRS PWM Receiver
1x Spare Long Antenna
The RadioMaster ER series of receivers are designed with size, ease of use, and range in mind. Utilizing ExpressLRS 2.4ghz Open-source firmware these receivers deliver features and range today’s pilots have come to expect.
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Features
Supports 8.4V HV servos and accessories
Robust, injection-molded receiver casing
Fast response speeds, incredible range
Supports 4 proportional and 1 switch channel (ExpressLRS 2.x)
Supports 5 proportional channels (ExpressLRS 3.x)
Compact size, easy to install. Perfect for Surface, marine, and air R/C applications.
Specifications
Item: ER5C 2.4GHz Receiver
Power supply: DC 4.5-8.4V
Antenna type: high sensitivity T-shape antenna
Wireless Protocol: ELRS 2.0 pre-installed
Output channel: CH1-4 standard PWM; CH5 switch (ON/OFF) PWM
Weight: 6.6g
Size: 37x19x13mm
Includes
1x ER5C ELRS PWM Receiver
1x Spare Long Antenna
The RadioMaster ER6 2.4GHz 6Ch ELRS PWM Receiver is designed for fixed-wing users. It provides outstanding performance, reliability, configuration, response, and range - all backed by a trustworthy shell with high structural strength. With up to 6 servo drives, receiver voltage telemetry, and flight battery telemetry with auto-detection, the ER6 offers an unparalleled experience for your fixed wings.
Check out our RadioMaster selection, the rest of our RC receivers, and all our RC transmitters, modules, and accessories
Features
ER6 Receiver User Manual
Based on the Revolutionary ExpressLRS System
High performance, high reliability, flexible configuration, fast response speed, and ultra-long range
Support 6 PWM Channels
Optimized ground-up PCB design
Automatically voltage telemetry of external battery voltage or built-in receiver voltage
Supports Wi-Fi updates and WEBUI configuration
High-quality 2.54 mm connector
Standard 20 cm High Sensitivity Antenna
Reserve 4pin CRSF input port
The shell adopts a one-piece molding process with high structural strength.
For fixed-wing aircraft and more
Specification
Item: ER6 2.4GHz ELRS PWM Receiver
Power supply: DC 4.5 - 8.4V
Antenna type: 20cm high sensitivity dual antenna
Wireless protocol: ExpressLRS 3.3.0 pre-installed
Output channel: 6CH PWM
Telemetry power: maximum 100mw (LUA Adjustable)
Telemetry Battery voltage detection range: DC 4.0 - 35V
Bus interface: CRSF
Weight: 14.5 grams
Dimensions: 43x25x15mm
Firmware: Device Category: Radiomaster 2.4Ghz / Device: RadioMaster ER6 2400
PWM RX
Includes
1x RadioMaster ER6 2.4GHz 6Ch ELRS PWM Receiver
1x Voltage telemetry wire (Type-B)
1x CRSF wire
1x ELRS- RX- SBUS wire
1x User Card
Say goodbye to range anxiety and unreliable RC reception with RadioMaster ER6-G 2.4GHz 6Ch ELRS PWM Receiver. Brand new RadioMaster ER series of PWM receivers, this one focuses on fast response speeds, flexible configuration, ultra-long range, and high reliability. It was designed for gliders, but can be used anywhere you need a PWM ELRS receiver, even an RC car or boat!
Check out our RadioMaster selection, the rest of our RC receivers and all our RC transmitters, modules, and accessories
Features
ER6G Receiver User Manual
Based on the Revolutionary ExpressLRS System
High performance, high reliability, flexible configuration, fast response speed and ultra-long range
Support 6 PWM Channels
Optimized ground up PCB design
Automatically voltage telemetry of external battery voltage or built-in receiver voltage
Supports Wi-Fi updates and WEBUI configuration
High-quality 2.54 mm connector
Standard 15cm High Sensitivity Antenna
For fixed-wing aircraft and gliders
'
Specification
Item: ER6G 2.4GHz ELRS PWM Receiver
Power supply: DC 3.5 - 8.4V
Antenna type: 15cm high sensitivity antenna
Wireless protocol: ExpressLRS 3.3.0 pre-installed
Output channel: 6CH PWM
Telemetry power: maximum 50mw (LUA Adjustable)
Battery voltage detection range: DC 3.0 - 26V
Weight: 5.0 grams
Dimensions: 42x13x8mm
Firmware: Device Category: Radiomaster 2.4Ghz
Includes
1x RadioMaster ER6-G 2.4GHz 6Ch ELRS PWM Receiver
The RadioMaster ER8 2.4GHz 8Ch ELRS PWM Receiver is an advanced RC receiver that provides high performance, reliability, and flexibility. Its ground-up PCB design and 8 PWM channels offer ultra-long range, fast response speed, and the ability to support Wi-Fi updates and WEBUI configuration. With a 20 cm high-sensitivity antenna and 4pin CRSF input port, the RadioMaster ER8 is ideal for fixed-wing aircraft and more.
Check out our RadioMaster selection, the rest of our RC receivers, and all our RC transmitters, modules, and accessories
Features
ER8 Receiver User Manual
Based on the Revolutionary ExpressLRS System
High performance, high reliability, flexible configuration, fast response speed, and ultra-long range
Support 8 PWM Channels
Optimized ground-up PCB design
Automatically voltage telemetry of external battery voltage or built-in receiver voltage
Supports Wi-Fi updates and WEBUI configuration
High-quality 2.54 mm connector
Standard 20 cm High Sensitivity Antenna
Reserve 4pin CRSF input port
The shell adopts one-piece molding process with high structural strength
For fixed-wing aircraft and more
Specification
Item: ER8 2.4GHz ELRS PWM Receiver
Power supply: DC 4.5 - 8.4V
Antenna type: 20cm high sensitivity antenna
Wireless protocol: ExpressLRS 3.3.0 pre-installed
Output channel: 8CH PWM
Telemetry power: maximum 100mw (LUA Adjustable)
Battery voltage detection range: DC 4.0 - 35V
Bus interface: CRSF
Weight: 16.5 g
Size: 43x30x15mm
Firmware: Device Category: Radiomaster 2.4Ghz / Device: RadioMaster ER8 2400 PWM RX
Include
1x RadioMaster ER8 2.4GHz 8Ch ELRS PWM Receiver
1x Voltage telemetry wire (Type-B)
1x CRSF wire
1x ELRS- RX- SBUS wire
1x User Card
Check out this set of lubricating oil and damping oil.
Use the damping oil with a consistency of T-05 for a silky smooth dampening effect on your throttle tension bar.
Use the lubricating oil with a consistency of 3# for gimbal bearings and moving parts.
Check out our RadioMaster selection and our RC transmitters, modules, and accessories!
Includes
1x RadioMaster Gimbal Lubricant Set
Tired of damaging or getting your transmitter dirty? Keep it secure and protected in this case designed specifically for the TX16S. Not only will it hold your radio, there's also room for goggles, packs or whatever else you may need to carry to the field!
Check out the rest of our RadioMaster selection!
Specifications
Dimensions: 330x235x120mm
Includes
1x RadioMaster Large Carrying Case for TX16S
Stand out from other pilots with these LED Gimbal shrouds for your TX16S transmitter or Boxer transmitter. With a simple installation process, this is one of the easiest and best looking mods you can do to your radio!
Check out the rest of our RadioMaster selection!
Includes
1x RadioMaster LED Gimbal Shroud Kit for TX16S or Boxer
RadioMaster Mini CNC AG01 Hall Gimbal Set for Zorro & TX12 was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The Mini AG01 will take your TX12 or Zorro to the next level.
Check out our RadioMaster collection and all our RC transmitters!
Features
Designed specifically for the RadioMaster TX16S Radio
CNC Aviation-Grade Aluminum
Non-Contact Hall Sensors
Quad Precision Bearings
Stick Travel Adjustment
Sticky360 Stick Ends
Specifications
Input Voltage: DC 3.3V
Adjustable travel range: 38°- 54°
Temperature range: -20°c-85°c
Linearity: Real-time (No delay)
Adjustable Tension: Yes
Quad Bearing: Yes
Sensor Type: Hall
Dimensions: 49x42x48mm
Weight: 42g
Includes
2x RadioMaster Mini CNC AG01 Hall Gimbal Set for Zorro & TX12
2x Hex tool
8x Installation screw
2x Spare normal tension spring
2x Throttle tension screw
A colored replacement case for the RadioMaster Pocket EdgeTX RC Transmitter.
Choose between multiple vibrant colors to style up your radio!
Check out our RadioMaster collection and all our RC transmitters!
Features
Multiple color case options
Ergonomically Designed
Easy Installation
Specifications
Color: Orange, Yellow, Pink, Charcoal, Clear
Includes
1x RadioMaster Pocket Radio Case - Choose Your Color
Radiomaster R81 is a FrSky D8 compatible receiver with dual antennas, SBUS out, and a tiny size. Very similar to the FrSky XM+.
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Specifications
Channels: 8CH
Frequency range: 2400-2483.5Mhz
Power input range: 4.5-6V
Signal format: FrSky D8 Compatible
Output format: SBUS (Inverted)
Support return: support return RSSI
Control distance: more than 1km
Antenna length: Approximaltly 6cm
Size: 17x11 mm
Weight: 2g
Includes
1x RadioMaster R81 SBUS D8 2.4GHz Nano Receiver
Bind method:
1. Press and hold the BIND button on the receiver then connect power. After approximately 3 seconds, the receiver LED will be RED, the receiver is now in bind mode
2. Select the D8 protocol for the multi-protocol menu of your remote control, and press the [BIND] option, the red light of the receiver will flash indicating successful bind
3. Exit bind mode on your remote control and disconnect power to the receiver then power the receiver once more. The LED will now be solid RED indicated the bind is now done. If not please repeat step 1 and 2
Fail-safe Protection:
1. Press the BIND button once within 10 seconds of th eceiver being powered on, and the receiver will save all the current channel values of the remote control as the fail-safe value
2. 10 seconds after the receiver is powered on, the BIND button function will be disabled to prevent accidental changes to to the fail-safe settings while preparing the model for flight
RSSI output:
This receiver has a total of 9 channels. 8 channels + an RSSI output channel.
Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver itself, which can be read by the flight controller and sent to the OSD device Show
signal strength.
The R88 V2 receiver is Frsky D8 / D16 and Futaba SFHSS Compatible and offers a range suitable to drones and RC modelers. This receiver has a total of 8 PWM channels + 9 SBUS Channels (Sbus has 8 control channels + 1 RSSI channel). Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver, which can be read by various flight controllers and sent to the OSD to show signal strength in the FPV video feed. Check out our RadioMaster selection, the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Specifications
Signal format: D8, D16 & SFHSS Compatible
Output format: PWM
Frequency Range: 2400 MHz to 2483.5 MHz
Power input range: 4.5-6V
Output format: PWM/Sbus
Support return: support return RSSI
Dimension: 40x26x16mm
Range: more than 1km
Antenna length: 15 cm
Weight: 11g
User Manual
User Manual
Includes
1x RadioMaster R88 V2 2.4GHz Wing Receiver
1x Cable
Bind method
1. Press and hold the BIND button on the receiver then connect power. After approximately 3 seconds, the receiver LED will be RED, the receiver is now in bind mode
2. Select the D8 protocol for the multi-protocol menu of your remote control, and press the [BIND] option, the red light of the receiver will flash indicating successful bind
3. Exit bind mode on your remote control and disconnect power to the receiver then power the receiver once more. The LED will now be solid RED indicated the bind is now done. If not please repeat step 1 and 2
Fail-safe Protection:
1. Press the BIND button once within 10 seconds of the receiver being powered on, and the
receiver will save all the current channel values of the remote control as the fail-safe value
2. 10 seconds after the receiver is powered on, the BIND button function will be disabled to
prevent accidental changes to to the fail-safe settings while preparing the model for fa
RSSI output:
This receiver has a total of 9 channels. 8 channels + an RSSI output channel.
Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver itself, which can be read by the flight controller and sent to the OSD device Show
signal strength.
The RadioMaster Ranger 2.4GHz ELRS Module features a rugged CNC case and two module bay adapters. Other features include an OLED display, built-in accelerometer, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system. The 5 Direction Nav key and customizable shortcut buttons make this module user-friendly and customizable.
The starter combo also includes additional RPI receivers and one RP2 Receiver.
Check out all our RC Transmitters and our entire RadioMaster selection!
Features
2 Customizable Shortcut Buttons
High-Efficiency Cooling System
ExpressLRS 2.4GHz Module
Max F-1000Hz Packet Rate
WiFi and Bluetooth Support
Rugged CNC Housing
RGB Lighting effects
5 Direction NAV Key
1W Power Output
OLED Display
Specifications
Dimension: 178x51x25mm, 138g(with Moxon antenna) / 95x51x25mm, 126g (without antenna)
Maximum packet rate: 500Hz/F1000Hz
Minimum receiver refresh rate: 25Hz
Futaba CRSF socket cable: Included
Frequency: ExpressLRS 2.4GHz
Regulatory Domain: ISM2400
Packet Rate: MAX F-1000Hz
OLED screen: 64x128px
Module bay adapters: JR standard 5pin socket & Nano standard 8pin socket
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
Weight: 138g (with Moxon antenna) / 135g (with T antenna)
3-Axis Accelerometer: Yes (STK8BA58 MEMS Accelerometer)
Power Output: 1WItem: Ranger 2.4GHz ELRS Module
MCU: ESP32(main), ESP8285(aux, as esp backpack)
Frequency Range: 2400 MHz to 2480 MHz
XT30 Power supply voltage: DC 6V - 16V
OLED screen: 64x128px
Maximum packet rate: 500Hz/F1000Hz
Minimum receiver refresh rate: 25Hz
Futaba CRSF socket cable: Included
Frequency: ExpressLRS 2.4GHz
Regulatory Domain: ISM2400
Packet Rate: MAX F-1000Hz
OLED screen: 64x128px
RF chip: SX1281IMLTRT
Accelerometer: Built-In
RGB: Built-in light strip
Bluetooth support: Yes
3-Axis Accelerometer: Yes (STK8BA58 MEMS Accelerometer)
Wifi Support: Yes
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
Weight: 138g (with Moxon antenna) / 135g (with T antenna)
Module bay adapters: JR standard 5pin socket & Nano standard 8pin socket
Includes Transmitter Only
1x Nano Standard 8pin Socket Module Bay Adapter
1x JR Standard 5pin Socket Module Bay Adapter
1x Radiomaster Ranger 2.4Ghz ELRS Module
1x 2.4GHz Moxon Antenna - RP-SMA
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws
Includes Starter Combo
1x Nano Standard 8pin Socket Module Bay Adapter
1x JR Standard 5pin Socket Module Bay Adapter
1x Radiomaster Ranger 2.4Ghz ELRS Module
1x 2.4GHz Moxon Antenna - RP-SMA
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
2x Radiomaster RP1 Receiver
1x Radiomaster RP2 Receiver
1x Futaba CRSF socket cable
3x M2x5 Screws
V1.6 Ranger Micro & Nano Modules: have resolved the external power issue and have begun shipping March.
The RadioMaster Ranger Micro 2.4GHz ELRS Transmitter Module features a JR module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system.
The starter combo also includes additional RPI receivers and one RP2 Receiver.
Check out all our RC Transmitters and our entire RadioMaster selection!
Features
The JR connector supports TX16S MKII/TX12 MKII or JR standard 5pin socket radios.
Micro ExpresssLRS 2.4GHz Module
High-Efficiency Cooling System
WiFi and Bluetooth Support
Max F-1000Hz Packet Rate
1W Power Output
Specifications
Minimum receiver refresh rate: 25Hz
Weight: 50g (with Moxon antenna）
Regulatory Domain: ISM2400
Item: Ranger Micro Module
RF chip: SX1281IMLTRT
Bluetooth support: Yes
Wifi Support: Yes
Dimension: 136x49x33mm, 50g (with Moxon antenna) / 74x49x33mm, 40.5g (without antenna)
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
MCU: ESP32(main), ESP8285(aux,as esp backpack)
Frequency Range: 2400 MHz to 2480 MHz
XT30 Power supply voltage: DC 6V - 16V
Maximum packet rate: 500Hz/F1000Hz
Includes Transmitter Only
1x Radiomaster Ranger Micro 2.4Ghz ELRS Module
1x JR Standard 5pin Socket Module Bay Adapter
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws
Includes Starter Combo
1x Radiomaster Ranger Micro 2.4Ghz ELRS Module
1x JR Standard 5pin Socket Module Bay Adapter
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws
2x Radiomaster RP1 Receiver
1x Radiomaster RP2 Receiver
V1.6 Ranger Micro & Nano Modules: have resolved the external power issue and have begun shipping March.
The RadioMaster Ranger Nano 2.4GHz ELRS Transmitter Module features a nano module bay adapter, packet rates up to F-1000Hz, up to 1 Watt Power output, and a high-efficiency cooling system.
The starter combo also includes additional RPI receivers and one RP2 Receiver.
Check out all our RC Transmitters and our entire RadioMaster selection!
Features
The JR connector supports TX16S MKII/TX12 MKII or JR standard 5pin socket radios.
Micro ExpresssLRS 2.4GHz Module
High-Efficiency Cooling System
WiFi and Bluetooth Support
Max F-1000Hz Packet Rate
1W Power Output
Specifications
Dimension: 136x42x26mm, 48g (with antenna) / 74x42x26mm, 39g (without antenna)
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
MCU: ESP32(main), ESP8285(aux,as esp backpack)
Frequency Range: 2400 MHz to 2480 MHz
XT30 Power supply voltage: DC 6V - 16V
Maximum packet rate: 500Hz/F1000Hz
Minimum receiver refresh rate: 25Hz
Regulatory Domain: ISM2400
Item: Ranger Nano Module
Weight: 48g (with antenna）
RF chip: SX1281IMLTRT
Bluetooth support: Yes
Wifi Support: Yes
Includes Transmitter Only
1x Nano Standard 8pin Socket Module Bay Adapter
1x Radiomaster Ranger Nano 2.4Ghz ELRS Module
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws
Includes Starter Combo
1x Nano Standard 8pin Socket Module Bay Adapter
1x Radiomaster Ranger Nano 2.4Ghz ELRS Module
1x Hexagon Socket Screwdriver
1x 2.4GHz T Antenna - RP-SMA
1x Futaba CRSF socket cable
3x M2x5 Screws
2x Radiomaster RP1 Receiver
1x Radiomaster RP2 Receiver
Fix those broken TX16S switches with these replacements directly from RadioMaster!
Make sure to check out the rest of our transmitter accessories and the rest of our RadioMaster gear!
Includes
1x RadioMaster Replacement Transmitter Switches for TX16S
Note: The packaging in this product will mention V2, however the software is confirmed ELRS V3.
The Nano receivers, developed by Jye Smith of ExpressLRS, have ESP8285 MCU and SX1280 RF chip. RP1 has a UFL antenna socket while RP2 has a built-in ceramic antenna, making it super light and small. Both have WIFI built in, allowing you to upgrade firmware and configure the Receiver via WebUI. Both RP1 and RP2 have low-latency, high-refresh-rate RF module, making them ideal for FPV and long-range. Furthermore, their ultra-light Nano size allows you to fit them anywhere, from whoops to fixed-wing models. The EP1 comes with ELRS Firmware V3 pre-installed and a TCXO oscillator for solid connection & reliability.
Check out the RP2 if that fits your needs more!
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Features
TCXO oscillator for solid connection & reliability.
Improved PCB design is better for heat dissipation.
ELRS Firmware V3 (pre-installed)
LED on the top side of PCB.
Solder pads are improved and easier to solder to.
Open-source receiver based on ExpressLRS
Upgraded rigid antenna with greater durability and performance
Specifications
Item: RP1 Nano ExpressLRS 2.4ghz Receiver
Type: ISM
Antenna: 65mm 2.4ghz T Antenna
Maximum receive refresh rate: 500Hz / F1000Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 2.2g (Including antenna)
Dimension: 13mmx11mmx3mm
Firmware Version: ExpressLRS v3.0 pre-installed
FW Target: RadioMaster RP1/2 2400 RX
Bus interface: CRSF
User Manual
RP1 Receiver User Manual
Includes
1x RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver
1x 65mm UFL 2.4Ghz T Antenna
1x User Manual
Note: The packaging in this product will mention V2, however the software is confirmed ELRS V3.
The RP2 has a ceramic antenna, super light & small, ideal for racing. Built-in WIFI lets you upgrade firmware & configure the receiver via WebUI on PC/mobile. Low latency & high refresh rate makes it perfect for FPV & long-range flights. Also great for whoops, drones & fixed-wing models, as this nano receiver can fit anywhere! Developed by Jye Smith & the ExpressLRS team, it uses ESP8285 MCU & SX1280 RF chip. The EP2 comes with ELRS Firmware V3 pre-installed and a TCXO oscillator for solid connection & reliability.
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Features
TCXO oscillator for solid connection & reliability.
Improved PCB design is better for heat dissipation.
LED on the top side of PCB.
Solder pads are improved and easier to solder to.
Open-source receiver based on ExpressLRS
Upgraded rigid antenna with greater durability and performance
Specifications
MCU: ESP8285
Type: ISM
Antenna: On Board SMT Antenna
Bus interface: CRSF
Power input range: 5V
RF Chip: SX1280IMLTRT
Maximum receive refresh rate: 500Hz / F1000Hz
Minimum receiver refresh rate: 25Hz
Firmware Version: ExpressLRS V3.0 pre-installed
Signal format: ELRS
FW Target: RadioMaster RP2 2400 RX
Size: 13 x 11 x 7mm
Weight: 0.55g (On Board antenna)
User Manual
RP2 Receiver User Manual
Includes
1 x RadioMaster RP2 V2 2.4GHz ELRS Nano Receiver - Ceramic Antenna
1 x User Manual
The RadioMaster RP series of receivers are designed with size, ease of use, and range in mind. Utilizing ExpressLRS 2.4ghz Open-source firmware the RP series of nano receivers deliver features and range today’s pilots have come to expect.
It is equipped with and a TCXO oscillator for solid connection & reliability. Developed around the ESP8285 MCU and SX1280IMLTRT RF Chip the RP series offer Lora and FLRC 2.4ghz RF links offering incredible range and low latency. With Wifi built-in, firmware updates can be done on your craft without the need to remove the receiver. Binding can be done using a bind phrase meaning no more bind plugs or fiddly button presses while trying to plug in your battery.
The RP3 receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mw of telemetry performance, and antenna switching for antenna diversity.
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Features
TCXO oscillator for solid connection & reliability.
Optimized PCB design for better heat dissipation.
LNA for better receiver range.
PA for better telemetry range.
Antenna Diversity for improved signal stability and range.
Specifications
Channels: 8CH
MCU: ESP8285
Frequency range: 2400 MHz to 2480 MHz
Power input range: 5v
Telemetry RF power: max 250mw
RF Chip: SX1280IMLTRT
Maximum receive refresh rate: 500Hz / F1000Hz
Minimum receiver refresh rate: 25Hz
Firmware Version: ExpressLRS v3.0 pre-installed
Signal format: ELRS
Support return: support return RSSI
Antenna length: 65mm 2.4ghz T
Size: 22x13x4mm
Weight: 4.6g (including antennas)
Includes
1 x RP3 ExpressLRS 2.4ghz Nano Receiver
2 x 65mm UFL 2.4Ghz T Antenna
1 x User Manual
The RadioMaster Sticky360 Stick Ends for AG01 Gimbals two piece anodized aluminum rc transmitter stick ends are M4 threaded for the AG01 gimbals but also work with any M4 threaded gimbals. The two piece design allows you to adjust the height of the stick ends to suit your grip style. Aggressive knurling keeps you in control at all times. It doesn't matter if you're a thumber, pincher or somewhere in between, the Sticky 360 series brings you a comfortable, zero-slip experience.
Make sure to check out the rest of our transmitter accessories and the rest of our RadioMaster gear!
Specifications
Threading: M4
Dimensions: 9.2x24mm
Weight: 1.9g
Includes
2x RadioMaster Sticky360 Gimbal Stick Ends
These two piece anodized aluminum rc transmitter stick ends are M3 threaded for the AG01 Mini gimbals but also work with any M3 threaded gimbals. The two piece design allows you to adjust the height of the stick ends to suit your grip style. Aggressive knurling keeps you in control at all times. It doesn't matter if you're a thumber, pincher or somewhere in between, the Sticky 360 series brings you a comfortable, zero-slip experience.
Make sure to check out the rest of our transmitter accessories and the rest of our RadioMaster gear!
Specifications
Threading: M3
Dimensions: 7.9x21.6mm
Weight: 1.2g
Includes
2x RadioMaster Sticky360 Mini Gimbal Stick Ends
The Mighty, Mini TX12MKII radio has arrived! Many years ago, RadioMaster set out to create the very best compact radio in its class. The TX12 has become the go-to product for pilots who seek a robust, dependable, and endlessly upgradable open-source radio in a small form factor. Working with the R/C community and open-source partners,
A class-leading compact radio, with updated ergonomics, hardware, and software. Complete with a JR module bay ready for use with your micro external modules. Other features include built-in charging, simulator plug-and-play ready, and EdgeTX firmware.
The included battery tray takes two 18650 Li-Ion batteries.
Check out our RadioMaster collection and all our RC transmitters!
Features
Added internal ExpressLRS module support
Updated main board design from STM32F207 to STM32F407
Improved USB-C QC 3.0 Charging
Precision hall-effect gimbals as standard
EdgeTX operating system installed from the factory
Updated rear case with comfortable grips
Improved S1 / S2 slider grip
SD Card included
Provide M1 and M2 modes
Specifications
Size: 170*159*108mm
Weight: 363g
Frequency: 2.400GHZ-2.480GHZ
RF Chip: ExpressLRS (ELRS) Or CC2500
Working Current: 320mA@8.4V
Voltage Range: 6.6-8.4v DC
Radio Firmware: EdgeTX (Transmitter) / ExpressLRS (RF module)
Channels: Up to 16 (depending on the receiver)
Display: 128x64 Monochrome LCD display
Gimbal: High-precision hall gimbals
External module: JR/FrSKY/Crossfire compatible
Upgrade Method: USB/SD card & EdgeTX Buddy online or EdgeTX Companion PC software
USB Charging: QC3 USB-C
SD Card: Included
Includes
1x RadioMaster TX12 MKII Multi-Protocol EdgeTX 2.4GHz RC Transmitter
1x Antenna
1x USB-C Cable
1x Quick Start Guide
1x Sticker
Choose Throttle Gimbal, Centering Gimbal or a set of both.This Radiomaster AG01 Full CNC Hall Gimbal Set was designed and tested for over a year. The AG01 is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16s to the next level.
The AG01 gimbals have been in development with our engineers and champion pro pilots such as MCK, Alex Campbell, Noical, Veysi.FPV, AZFPV, Xiao Zheng, and Long XL meet the demanding requirements of the world’s most competitive racing events.
Check out our RadioMaster collection and all our RC transmitters!
Features
Designed specifically for the RadioMaster TX16S Radio
Mode Switching Throttle Tension Adjustment
CNC Aviation-Grade Aluminum
Spring Tension Adjustment
Non-Contact Hall Sensors
Quad Precision Bearings
Stick Travel Adjustment
Ergonomic Stick Ends
Adjustable Exterior
Specifications
Adjustable travel range: 38°- 54°
Temperature range: -20°c-85°c
Linearity: Real-time (No delay)
Working voltage: DC 3.3V
Adjustable tension: Yes
Adjustable mode: Yes
Product model: AG01
Size: 60*53*56mm
Quad bearing: Yes
Sensing type: Hall
Weight: 82g
Includes
Radiomaster TX16S CNC Hall Gimbal (Choose Throttle, Centering or Set of Both)
We previously only offered the standard version of black AG01 gimbals. Now it's time to show your true colors with the AG01 color gimbals! Built to the same cutting-edge precision as the black AG01s, the color AG01s will look fly while you're on the fly!
Check out our RadioMaster collection and all our RC transmitters!
Features
Sicky360 gimbal stick ends - 360° Non-slip geometry with dual-ring design increases comfort and contact.
Made with CNC-processed aviation-grade aluminum.
Non-contact hall sensors, for accurate control inputs and precise centering.
Quad precision bearings, for unparalleled stick-feel.
Improved package, to better protect the AG01 Gimbals.
Specifications
Adjustable travel range: 38°- 54°
Temperature range: -20°c-85°c
Linearity: Real-time (No delay)
Working voltage: DC 3.3V
Adjustable tension: Yes
Adjustable mode: Yes
Product model: AG01
Size: 60*53*56mm
Quad bearing: Yes
Sensing type: Hall
Weight: 82g
Includes
RadioMaster TX16S CNC AG01 Hall Gimbal Set - Choose Color
Upgrade your RadioMaster TX16S Multi-Protocol RC Transmitter with these high-quality CNC parts. Replaces most switches and buttons along with the gimbal faceplates. This upgrade kit also adds functionality by making the handle a folding one compared to the non-folding stock handle.This V3 parts set is for TX16S radios with V3 gimbals. Their are holes for reaching adjustment screws through the front of the radio. See Photos.
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Includes
1x RadioMaster TX16S CNC Upgrade Parts Set V3
Upgrade your TX16S MKII with these high-quality CNC parts. Replaces most switches and buttons along with the gimbal faceplates. This upgrade kit also adds functionality by making the handle a folding one compared to the non-folding stock handle.This V4 parts set is for TX16S MKII radios with V4 hall gimbals (non AG01). Their are holes for reaching adjustment screws through the front of the radio. See Photos.
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Includes
1x RadioMaster TX16S MKII CNC Upgrade Parts Set V4
The best just got better! Check out the huge list of improvements over the TX16S below!Be sure to choose the version with the internal radio module right for you. (4in1 or ELRS)We also carry the TX16S MKII with V4.0 Hall Gimbals!Check out our RadioMaster collection and all our RC transmitters!
Features
Improved internal circuity and optimized power supply.
New charge circuitry with integrated reverse-polarity protection.
Optimized charge IC now allows up to 2.2A internal USB-C charge current.
Rear mounted audio jack provided headphone output.
Full CNC AG01 Hall Gimbals w/ improved centering and temperature stability
Optional high/low rear grips included for improved ergonomics.
Improved S1/S2 knobs with clear centre-detents.
Improved LS/RS Sliders with smoother feel and better centre-detents.
Redesigned battery cover for improved battery access.
Retooled body shell with improved fit and finish.
Trainer socket changed to standard TRS 3.5mm socket.
Rear DIY Socket added for personalised mods.
Improved internal plastics for better longevity.
Available ELRS and 4in1 versions.
Specifications
Size: 287x129x184mm
Weight: 750g (without battery)
Transmission frequency: 2.400GHz-2.480GHz
Transmitter module: Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401)； Option 2: Internal ELRS (SX1280)
Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent); Internal ELRS : Max 250mw (transmitting power is adjustable)
Antenna gain: 2db (transmit power adjustable)
Working current: 400mA
Working voltage: 6.6-8.4v DC
Remote control distance:> 2km @ 22dbm
Radio firmware: EdgeTX
Channels: Up to 16 channels (depending on the receiver)
Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
Gimbal: AG01 CNC Hall sensor
Module Bay: JR compatible module bay
Upgrade method: Supports USB-C online / SD card offline upgrade
Includes
1x TX16S Mark II Radio Controller
1x 18650 Tray
1x USB-C Cable
1x Screen Protector
2x Flat Grip
2x Raised Grip
1x TX16S Key Chain
AG01 Gimbal is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning.
The best just got better! Check out the huge list of improvements over the TX16S below!Be sure to choose the version with the internal radio module right for you. (4in1 or ELRS)We also carry the TX16S MKII with AG01 Gimbals!Check out our RadioMaster collection and all our RC transmitters!
Features
Improved internal circuity and optimized power supply.
New charge circuitry with integrated reverse-polarity protection.
Optimized charge IC now allows up to 2.2A internal USB-C charge current.
Rear mounted audio jack provided headphone output.
V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
Optional high/low rear grips included for improved ergonomics.
Improved S1/S2 knobs with clear centre-detents.
Improved LS/RS Sliders with smoother feel and better centre-detents.
Redesigned battery cover for improved battery access.
Retooled body shell with improved fit and finish.
Trainer socket changed to standard TRS 3.5mm socket.
Rear DIY Socket added for personalised mods.
Improved internal plastics for better longevity.
Available ELRS and 4in1 versions.
Specifications
Size: 287x129x184mm
Weight: 750g (without battery)
Transmission frequency: 2.400GHz-2.480GHz
Transmitter module: Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401)； Option 2: Internal ELRS (SX1280)
Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent); Internal ELRS : Max 250mw (transmitting power is adjustable)
Antenna gain: 2db (transmit power adjustable)
Working current: 400mA
Working voltage: 6.6-8.4v DC
Remote control distance:> 2km @ 22dbm
Radio firmware: EdgeTX
Channels: Up to 16 channels (depending on the receiver)
Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
Gimbal: V4.0 Hall sensor with Aluminium fascia
Module Bay: JR compatible module bay
Upgrade method: Supports USB-C online / SD card offline upgrade
Includes
1x TX16S Mark II Radio Controller
1x 18650 Tray
1x USB-C Cable
1x Screen Protector
2x Flat Grip
2x Raised Grip
1x TX16S Key Chain
Upgrade your RadioMaster TX16S Multi-Protocol RC Transmitter with these high quality leather grips.
Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
Includes
2x RadioMaster TX 16S Leather Side Grip ( 1 Left, 1 Right)
The best just got better! Check out the huge list of improvements over the TX16S Max below!
All carbon body, with black parts and internal ELRS
We also carry the TX16S MKII Max with V4.0 Hall Gimbals!
Check out our RadioMaster collection and all our RC transmitters!
Features
Improved internal circuitry and optimized power supply.
New charge circuitry with integrated reverse-polarity protection.
Optimized charge IC now allows up to 2.2A internal USB-C charge current.
Rear-mounted audio jack provided headphone output.
V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
Optional high/low rear grips are included for improved ergonomics.
Improved S1/S2 knobs with clear centre-detents.
Improved LS/RS Sliders with a smoother feel and better centre-detents.
Redesigned battery cover for improved battery access.
Retooled body shell with improved fit and finish.
The trainer socket was changed to a standard TRS 3.5mm socket.
A rear DIY Socket was added for personalized mods.
Improved internal plastics for better longevity.
Available ELRS and 4in1 versions.
AG01 GIMBALS
AG01 Gimbal is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning.
Flat & Raised Grips Included
Both the raised and flat versions of the rear grips are included allowing you to customize the feel of your TX16s MKII right out of the box.
Built-in dual speakers
External Module Bay
The TX16s natively supports Team Black Sheep MicroTX modules in CRSFmode with LUA scripts. Best of all, the TX16s Internal 4-in-1 Multi-protocol module allows you to keep the MicroTX installed and switch between internal RF and Crossfire via software, no more module swapping.
Easy Firmware Updates
Upgraded Design
Retooled faceplate with improved fit and finish
Improved S1/S2 knobs with center detents
4.3” IPS Color Display - The TX16s features a bright and clear 4.3-inch IPS color display for easy and convenient model setup and operation with adjustable brightness to suit all conditions.
Improved LS/RS Sliders with a smoother feel and better center detents.
New 3.5mm Audio jack - Rear-mounted audio jack minimizes RF interference from external modules and adds a headphone audio feature.
Redesigned battery cover, easier to remove.
A rear DIY Socket added for personalized mods.
Radio Overview
Specifications
Size: 287x129x184mm
Weight: 750g (without battery)
Transmission frequency: 2.400GHz-2.480GHz
Transmitter module: Internal ELRS (SX1280)
Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent); Internal ELRS : Max 250mw (transmitting power is adjustable)
Antenna gain: 2db (transmit power adjustable)
Working current: 400mA
Working voltage: 6.6-8.4v DC
Remote control distance:> 2km @ 22dbm
Radio firmware: EdgeTX
Channels: Up to 16 channels (depending on the receiver)
Display: 4.3-inch TFT full-color touch display with a resolution of 480 x 272
Gimbal: AG01 CNC Hall sensor
Module Bay: JR-compatible module bay
Upgrade method: Supports USB-C online / SD card offline upgrade
Includes
1x TX16S Mark II Max Radio Controller
1x 18650 Tray
1x USB-C Cable
1x Screen Protector
2x Flat Grips
2x Raised Grips
1x TX16S Key Chain
The best just got better! Check out the huge list of improvements over the TX16S Max below!Be sure to choose the version with the color and internal radio module right for you. (Red or Black , 4in1 or ELRS)We also carry the TX16S MKII Max with AG01 Gimbals!Check out our RadioMaster collection and all our RC transmitters!
Features
Improved internal circuity and optimized power supply.
New charge circuitry with integrated reverse-polarity protection.
Optimized charge IC now allows up to 2.2A internal USB-C charge current.
Rear mounted audio jack provided headphone output.
V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
Optional high/low rear grips included for improved ergonomics.
Improved S1/S2 knobs with clear centre-detents.
Improved LS/RS Sliders with smoother feel and better centre-detents.
Redesigned battery cover for improved battery access.
Retooled body shell with improved fit and finish.
Trainer socket changed to standard TRS 3.5mm socket.
Rear DIY Socket added for personalised mods.
Improved internal plastics for better longevity.
Available ELRS and 4in1 versions.
Specifications
Size: 287x129x184mm
Weight: 750g (without battery)
Transmission frequency: 2.400GHz-2.480GHz
Transmitter module: Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401)； Option 2: Internal ELRS (SX1280)
Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent); Internal ELRS : Max 250mw (transmitting power is adjustable)
Antenna gain: 2db (transmit power adjustable)
Working current: 400mA
Working voltage: 6.6-8.4v DC
Remote control distance:> 2km @ 22dbm
Radio firmware: EdgeTX
Channels: Up to 16 channels (depending on the receiver)
Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
Gimbal: V4.0 Hall sensor with Aluminium fascia
Module Bay: JR compatible module bay
Upgrade method: Supports USB-C online / SD card offline upgrade
Includes
1x TX16S Mark II Max Radio Controller
1x 18650 Tray
1x USB-C Cable
1x Screen Protector
2x Flat Grips
2x Raised Grips
1x TX16S Key Chain
The best just got better! Check out the huge list of improvements over the TX16S Max below!This special edition TX comes equipped with V4.0 Hall Gimbals, White LED Gimbal Lights, an internal ELRS RF module, and JB's signature purple color scheme!We also carry the TX16S MKII MAX Pro MCK Edition with AG01 Gimbals!Check out our RadioMaster collection and all our RC transmitters!
Features
Improved internal circuity and optimized power supply.
New charge circuitry with integrated reverse-polarity protection.
Optimized charge IC now allows up to 2.2A internal USB-C charge current.
Rear mounted audio jack provided headphone output.
V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
Optional high/low rear grips included for improved ergonomics.
Improved S1/S2 knobs with clear centre-detents.
Improved LS/RS Sliders with smoother feel and better centre-detents.
Redesigned battery cover for improved battery access.
Retooled body shell with improved fit and finish.
Trainer socket changed to standard TRS 3.5mm socket.
Rear DIY Socket added for personalised mods.
Improved internal plastics for better longevity.
White LED gimbal lights and custom JB purple color scheme!
Specifications
Size: 287x129x184mm
Weight: 750g (without battery)
Transmission frequency: 2.400GHz-2.480GHz
Transmitter module: Internal ELRS (SX1280)
Transmitting power: Internal ELRS : Max 250mw (transmitting power is adjustable)
Antenna gain: 2db (transmit power adjustable)
Working current: 400mA
Working voltage: 6.6-8.4v DC
Remote control distance:> 2km @ 22dbm
Radio firmware: EdgeTX
Module Firmware: ExpressLRS (ELRS)
Channels: Up to 16 channels (depending on the receiver)
Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
Gimbal: V4.0 Hall sensor with Aluminium fascia
Module Bay: JR compatible module bay
Upgrade method: Supports USB-C online / SD card offline upgrade
Includes
1x TX16S Mark II Max Joshua Bardwell Edition Radio Controller
1x 18650 Tray
1x USB-C Cable
1x Screen Protector
1x LED Gimbal Light Mod Set (White)
2x Flat Grips
2x Raised Grips
1x TX16S Key Chain
