Cplr Univ #5 w/DGB 4/
The Kadee HO-Scale #5 Magna-Matic Universal Metal Coupler features a Metal Coupler, #634 Centering Spring, insulated #232 Draft Gear Box and Lid with side and center screw holes for mounting. The NO.5® Coupler may be mounted with supplied #232 draft gear box or with Manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gear box to avoid the possible electrical crossover or shorting that may cause damage. Use the provided insulated draft gear box or use the very strong plastic isolated #28 Coupler which has the same mounting dimensions as the NO.5® Coupler.Two pair per package
Difco Side-Dump Car - Ready-to-Run - Master(R) -- Florida East Coast 4020 (Boxcar Red)
Product Information
The Atlas Difco Side-Dump Car is an integral part of any work train The railroad equivalent of a dump truck, the Difco car is designed to carry up to 100 tons of ballast, fill or rip rap. Each prototype car is fitted with large pneumatic cylinders and side doors, and can dump to the left or right of the tracks. While used primarily in work train service for dumping, Difco Side-Dump Cars can also be used in revenue service to carry sand, gravel, cinders, coal, limestone and other loose bulk materials used in industry. This car features a detailed injection-molded body, accurate decoration, appropriate 100-ton roller bearing trucks and magnetic knuckle couplers.
Difco Side-Dump Car - Ready-to-Run - Master(R) -- Florida East Coast 4023 (Boxcar Red)
Product Information
The Atlas Difco Side-Dump Car is an integral part of any work train The railroad equivalent of a dump truck, the Difco car is designed to carry up to 100 tons of ballast, fill or rip rap. Each prototype car is fitted with large pneumatic cylinders and side doors, and can dump to the left or right of the tracks. While used primarily in work train service for dumping, Difco Side-Dump Cars can also be used in revenue service to carry sand, gravel, cinders, coal, limestone and other loose bulk materials used in industry. This car features a detailed injection-molded body, accurate decoration, appropriate 100-ton roller bearing trucks and magnetic knuckle couplers.
The Digitrax BXPA1 is a combination DCC auto-reverser, occupancy detector, transponding detector and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state information to LocoNet. The BXPA1 is silent, solid state and uses no mechanical relays for auto-reversing.
Automatic reversing for one reversing section or sub-district.
DCC occupancy detection for one auto-reversing section lets you know when equipped rolling stock is in a detection section on your layout.
Integrated transponding zone lets you know the location of transponder-equipped locos or rolling stock.
Intelligent automatic short-circuit and over-current power management, improves reliability by avoiding most booster shutdowns.
Connects to LocoNet to transmit detection section occupancy, transponding and track power information.
Detects most powered locomotives in a detection section.
Detects rolling stock equipped with resistor wheel sets.
Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
Plug and play with Digitrax DCC systems.
LED indication of detection section occupancy, transponding, power status, and reversing section status.
Additional connections for opto-isolated occupancy detector output, manual power control, and remote status indicator.
Easy-connect, pluggable track wire terminal blocks can plug-in straight or at right angles.
Operations mode read back allows you to read CV values of decoders equipped with transponders when on track.
Firmware update capability via IPL over LocoNet.
Allows you to install and operate up to four turnouts directly through any DCC system that has turnout control. Works with solenoid turnout machines and slow motion motors. Other features include easy installation, LocoNet compatible, integral capacitor discharge, power from track or separate booster and buffered switch inputs. DCC compatible.
Kato's line of UNITRACK offers a variety of pieces, turnouts, bridges, structures, and accessories to allow you to build any layout your heart desires, all while ensuring track quality and steady delivery of electricity to your locomotives. Available both as individual pieces and as track sets, let Kato UNITRACK be the first track you put down, and you may never use another track again!
Kato
20-438
N Scale
Ready to Go/Pre-built
Kato's line of UNITRACK offers a variety of pieces, turnouts, bridges, structures, and accessories to allow you to build any layout your heart desires, all while ensuring track quality and steady delivery of electricity to your locomotives. Available both as individual pieces and as track sets, let Kato UNITRACK be the first track you put down, and you may never use another track again!
Kato
20-436
N Scale
Ready to Go/Pre-built
Kato's line of UNITRACK offers a variety of pieces, turnouts, bridges, structures, and accessories to allow you to build any layout your heart desires, all while ensuring track quality and steady delivery of electricity to your locomotives. Available both as individual pieces and as track sets, let Kato UNITRACK be the first track you put down, and you may never use another track again!
Kato
20-437
N Scale
Ready to Go/Pre-built
Product Information
Drivers taking a break for a tasty treat or a complete meal will find all their favorites at the local Walthers Cornerstone N Scale DQ Grill & Chill Restaurant. This easy-to-build plastic kit is based on modern restaurants with authentic signs and logos in use since 2007. This easy-to-build plastic kit includes the full-color freestanding and building signs. Kit parts are molded in four colors and the kit includes clear plastic window glazing. The DQ Grill & Chill Restaurant kit is one of many Cornerstone N Scale businesses. The finished DQ Grill & Chill model as shown measures: 4-1/2 x 3 x 1-9/16" 11.4 x 7.6 x 3.9cm
Officially licensed replica
Contemporary design seen all across North America
Factory-printed street and structure signs in correct colors
Drive-thru window
Molded in four realistic colors and clear plastic
Easy-to-build plastic kit
Photo shows assembled and painted model.
Product Information
This Walthers Trainline HO Scale Flatcar is great for adding to any freight train on your layout or train set. Trainline freight cars feature RP-25 metal wheels for superior performance on all kinds of track including smaller scale-sized Code 70 and larger rail. With their added weight, body-mounted knuckle couplers, and wheel tread matched to National Model Railroad Association standards, wheels on Trainline rolling stock are compatible with almost all North American HO model railroads and can be used as you expand your railroad. Other features of this Flatcar include molded details that stand up to handling during operation and realistic paint schemes for good looks. The Flatcar is part of the large line of Trainline cars and locomotives.
Fully assembled, ready to run
Colorful paint and lettering schemes
Fully assembled, ready to run
Use with any HO Scale train set
Body-mounted magnetic knuckle couplers
RP-25 metal wheels
