Get those props out of view with this easy to install gimbal extender for the DJI FPV Drone.
Check out the DJI FPV Drone and Accessories Products and the DJI FPV System product line!
Specifications
Weight: 13g
Includes
1 x Heyman DJI Gimbal Adapter
The HGLRC Backpack was designed with FPV Drone users and photography lovers in mind. It's made from splash-proof fabric and comes with a waterproof zip. This bag is flexible and gives you plenty of space, plus the thicker back provides great support. With lots of potential for expansion and DIY, this backpack is an ideal pick for flying and photography fans.
Check out all our backpacks and cases and all our HGLRC products!
Features
Splash-proof fabric, waterproof zipper
Thickened support, upgraded the back cooling air duct
Separate warehouse design, flexible DIY
Detachable straps, adjustable back system
Equipped with nameplate and DIY Velcro position
Side opening design, easy to organize and storage
Thickened laptop compartment
Super loading system, the limit can be carry to 8 FPV Drone
Specifications
Size:36cm/26cm/53cm
Main Material:900D Leather light material + 900D 600D Nylon PU
Product net weight:≈2.55kg
Includes
1x HGLRC B1 FPV Drone Backpack
The HGLRC Sector D5 FR 5" Freestyle FPV Frame uses a DeadCat configuration. It has quick swap arms, CNC aluminum side plates, dustproof belts, an integrated XT60 port, dust-proof straps, and optimized body parts for DJI O3 VTX. Its fixed lens ensures enhanced stability and reduced video jelly. Fly with style and durability!
Check out all our 5" frames and other DJI O3 Compatible Quads also our whole HGLRC product line!
Need Spare parts for your Sector Frame? Check out our spare parts list for all your needs.
Features
Replaceable arms for quick disassembly without taking apart the whole frame.
A fixed power outlet for convenience and protecting your power cable from cutting by propellers.
Dust-proof straps covering both sides to better protect your rig and keep them clean.
CNC aluminum side plates combined with 3D printed parts to make your drone look dope!
The Sector D5 optimized body aluminum parts for DJI O3 VTX. The lens is fixed by the print to effectively reduce low-frequency vibration, enhance shooting stability and reduce in-flight video jelly.
Specifications
Brand name: HGLRC
Model: Sector D5 FR Freestyle Frame
Material: 3K Carbon Fiber
Type: 5-inch
Wheelbase: 225 mm
Size: 230x184 mm
Top plate: 2.5mm
Middle plate: 2mm
Bottom plate: 2.5mm
Top and middle plate space: 25mm
FC mounting hole: 30.5mmx30.5mm/20x20mm M3
VTX Mounting: 20x20
Camera mount: 19x19mm & 20x20mm
Motor mounting hole: M3X16
Weight: 121.7g
Includes
1x HGLRC Sector D5 5" Freestyle Frame Kit
1 x 2.5 mm Top plate
1x 2 mm Mid plate
1x 2.5 mm Base plate
2x 5 mm Front arm
2x 5 mm Rear arm
1x 2.5mm Arm limit plate
2x 2mm Camera side panel
1x Frame head CNC aluminum parts (one pair)
1x TPU Black GOPRO holder mount
1X TPU black Cam Conversion board (one pair)
1x TPU black SMA antenna mount
1x TPU black GPS mount
1x TPU black bottom mount
4x TPU black arm protection
4x TPU Red footpad
2x Battery straps 20x250mm
1x Battery Anti-slip pad
1x Screw Accessory package
The CNC camera plates on this frame are designed to support the DJI O3 Air unit. Making this Frame an HD and Analog compatible frame.
The HGLRC Sector X5 FR is a 5" Freestyle FPV Frame with a Wide X configuration. Take your freestyle flights to the next level with this durable frame! This frame features quick swap arms for easy electronic fixes and CNC aluminum side plates. It also has Dustproof belts that mount on the side standoffs to protect electronics from any debris.
Check out all our 5" frames, as well as our whole HGLRC product line!
Need Spare parts for your Sector Frame? Check out our spare parts list for all your needs.
Features
Replaceable arms for quick disassembly without taking apart the whole frame
A fixed power outlet for convenience and protecting your power cable from cutting by propellers
Dust-proof straps covering both sides to better protect your rig and keep them clean
CNC aluminum side plates combined with 3D printed parts to make your drone look dope!
Specifications
Brand name:HGLRC
Model: Sector X5 Freestyle Frame
Material: 3K Carbon Fiber
Type: 5-inch
Wheelbase: 210 mm
Size: 199x178 mm
Top plate: 2.5mm
Middle plate: 2mm
Bottom plate: 2.5mm
Top and middle plate space: 25mm
FC mounting hole: 30.5mmx30.5mm/20x20mm M3
VTX Mounting: 20x20
Camera mount:19x19mm
Motor mounting hole: M3X16
Weight: 120g
Includes
1x 2.5 mm Top plate
1x 2 mm Middle plate
1x 2.5 mm Base plate
4x 5 mm Arm
1x 2.5mm Arm fixing plate
2x 2mm Camera side panel
1x Frame head CNC aluminum parts (one pair)
1x TPU Black GOPRO fix mount
1x TPU black SMA antenna mount
1x TPU black GPS mount
1x TPU black base plate protection cover
4x TPU black arm protection
4x TPU Red footpad
2x Battery straps 20x250mm
1x Battery Anti-slip pad
1x Screw Accessory package
This ultra-light F411 10A 1-2S AIO integrated flight controller comes with ExpressLRS 2.4G receiver and 400mW 5.8GHz adjustable power video transmission. The SPI ELRS receiver uses ceramic antennas for superior short-distance performance compared to older D8/D16 protocols. The built-in receiver offers high sensitivity, refresh rate and low latency — perfect for FPV enthusiasts. Compatible with 65/75/85mm/lightweight toothpick drone/whoop series and other frames.
Check out all of our HGLRC products and all our whoop flight controllers.
Features
Built-in SPI ELRS receiver/or external CRSF protocol receiver
Built-in integrated TBS 400mW 5.8GHz analog video transmission
Independent 3P socket, which can be directly connected to the motor
By default, the Bluejay firmware is flashed to improve the flight efficiency, which is the best choice for the drone
Compatible with all 65mm-85mm hoop/toothpick frames
Maximum support for an input voltage of 1-2S
Specifications
Product name: SPECTER 10A 1-2S AIO
MCU: STM32F411
MPU: IXM42688
BEC: 5V1.5A
OSD: support
LED: support
Buzzer: support
UARTS: UARTS1 image transmission OSD Adjustment parameters/UARTS2 CRSF
protocol receiver/ VTX HD
Built-in receiver: SPI ExpressLRS 2.4G
Built-in receiver frequency: 2.4GHZ
Built-in image transmission: 25-REC-100-400mW (adjustable)
Built-in image transmission frequency: 48CH-5.8ghz
Continuous current: 10A
Peak current: 13A (10s)
ESC protocol: Dshot600, Oneshot, Multishot
Flight control firmware: HGLRCF411SX1280 V2
ESC firmware: Z-H-30 (Bluejay)
Input voltage: 1-2S 3.7V-7.4V (Lipo)
Size: 32x32mm
Mounting hole: 25.5X25.5mm.M2
Weight: 4.9g
Includes
1x SPECTER 10A 1-2S AIO
1x XT30U-M 22AWG 70mm male power cord
1x PH2.0-2P 22AWG 35mm male power cord
1x MX1.25-3P 30AWG 75mm camera cable
4x M2x6.6 Shock-absorbing column
Wiring Diagram
The HGLRC Zeus ESC is a 60A 4-in-1 ESC with a 30.5x30.5 mounting pattern. The heat sink design makes this perfect for freestyle FPV racing by providing heat dissipation for high power and improved stability, and increased shock absorption.
Make sure to check out our other 30x30 ESCs and the rest of our HGLRC FPV Products.
Specifications
Input Voltage: 3-6S
Max Continuous Current: 60A
Max Burst Current: 65A (10s)
MCU: STM32F051
Firmware: BLHELI32
Weight：18g
Dimensions: 45x40x6.5mm
Includes
1x HGLRC Zeus 60A 3-6S 4-in-1 BLHeli_32 ESC
4x M3 Shock Absorption (Red)
1x Connecting Wire (XT60H)
1x SH1.0 8PIN Cable 60mm
1x Capacitor
Compact GPS Module from HGLRC.
The HGLRC M80 PRO GPS Module comes with a QMC5883 chip to help identify the location of your drone quickly. Receives a stronger antenna signal to make it easier to be found by satellites. No soldering needed just plug directly and use.
The HGLRC M80 PRO GPS Module is ideal for FPV racing drones!
Check out our GPS selection and all our HGLRC products!
Specifications
Item: HGLRC M80PRO GPS
Chip: M8030
Power Supply: 5V
Antenna: Ceramic Antenna
Receiving Format: GPS,GLONASS,GALILEO,QZSS,SBAS,BDS
Receiving Channel: 72 Searching Channel
Compass: QMC5883
Support Rate: 115200dps
Output Protocol: UBLOX
Output Frequency: 1Hz-10Hz,Default 10Hz
Speed Precison: 0.05 m/s
Level Positioning Precison: 2D ACC1.5m(ln Open Sky)
Receiving Sensitivity: Trace -162dBm
Capture: -160dBm
Dynamic Characteristics: Max Height:50000m
Max Speed: 500m/s
Max Acceleration: 4G
Working Temperature: -40℃-+85℃
Storage Temperature: -40℃-+105℃
Size: 25mm x 25mm x 8.3mm
Weight: 12.5g
Includes
1x HGRLC M80 Pro GPS Module
Take a look at the XRotor F7 Convertible Flight Controller from Hobbywing. This FC is similar to other versions with its OSD, and voltage monitoring, but the F7 now comes with an all-new 5V & 12V dual BEC Circuit and a special interface for the DJI image transmission system. The XRotor F7 Convertible flight controller is equipped with STM32F722 MCU which has a powerful computing ability and fast running speed. High sensitivity ICM20602 six-axis motion sensor, built-in 5V & 12V double BEC, integrated OSD, and a pitch module.
Check out our other flight controllers, and our Hobbywing selection!
Features
Equipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity MPU6500 six-axis motion sensor.
Supports BetaFlight, Cleanflight, Butterflight, Inva, and other mainstream FPV firmware.
DJI image transmission system port equipped with corresponding flat cable
Supports bidirectional DShot digital throttle communication.
Unique installation design and shock absorption structure.
On-board large capacity Flash memory chip.
On-board 5V & 12V dual BEC circuit.
On-board Pit Switch module.
Specifications
Firmware: HOBBYWING_XROTORF7CONV
FC Programming: Supported
Programming via Betaflight/ Cleanflight-configurator
Compatible with (Modes) PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, PROSHOT1000
Compatible with (Transmitters) PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
OSD Built-in
Input Voltage: 3-6S
Gyro: MPU6500
Voltage Monitoring Supported
Current Monitoring Supported
External Buzzer Supported
LED Control Supported
BEC 5V @ 1.5A ; 10V @ 1.5A
Mounting Pattern: 20x20mm M3 / 30x30mm M3
Size 32x32mm
Weight 3.3g
Manual Download
Includes
1x Hobbywing XRotor F7 3-6S 20x20 / 30x30 Convertible Flight Controller
1x Soft Mounting Grommets Set
1x Signal Cable
1x User Manual
Equipped with a powerful STM32F722 MCU and sensitive MPU6500 6-axis motion sensor, the XRotor F722 Stack/Combo offers bidirectional DShot digital throttle communication and a large on-board Flash memory. It also supports various FPV firmwares with adjustable parameters. Its 30/20mm double hole distance and flexible flat cable module (ideal for Hobbywing tower 4in1 ESC) with shock absorption mechanism reduce external vibration impact. For convenience, it includes a PIT switch module, dual BECs (5V & 10V), DJI image transmission port, Amp/Volt monitoring port, buzzer output port, and Micro USB port.
Check out all our 20x20 stacks, and our Hobbywing selection!
Features
Manual for the FC
Manual for the ESC
Super hardware and running speed
Special interface for DJI image transmission system
On-board 5V & 10V dual BEC circuit
On-board Pit Switch module
Perfectly support firmware of various FPV
Unique installation design and shock absorption structure
Perfectly match with Hobbywing ESC
Volt/Amp monitoring port
Buzzer output
Micro USB
Switch module of board load graphic transmission(VTX)
Specifications
XRotor F7 FC
MCU: STM32F722
Gyro: MPU6500
Barometer: No
OSD: Yes
Blackbox: Onboard
UARTS: 4 Sets
ESC Software: DShot300/600/12000
ESC Telemetry: Yes
Led Controller: Yes
Input Voltage: 3-6s Lipo (12.6-25.2V)
BEC: 5V 2A / 10V 2A
Mounting Pattern: 20x20mm M3 / 30x30mm M3
XRotor 45A BLHeli_32 ESC
Input Voltage: 3-6S
Max Continuous Current: 45A
Max Burst Current: 60A
BEC Output: NO
Firmware: Hobbywing_XRotor_BLHeli-32 Version
Throttle Calibration: Supported
ESC Programming: Stick Programming, BLHeliSuite32
DEO: Supported
OneShot Mode: Supported
Timing: Supported
Motor Rotation: Supported
Mounting Pattern: 20x20mm
Weight: 12g
Includes
1x Hobbywing XRotor F722 3-6S 20x20 Stack/Combo (F7 FC / 32Bit 45A 4in1 ESC)
1x Hardware Set
1x AMASS XT60 Connector
1x Cable Set
The Hobbywing XRotor F722 Stack/Combo packs in the latest tech: 65A (x4) ESCs, BLHeli_32 DShot 1200 support, two 5V BECs, plus a voltmeter module that lets your FC know your battery's voltage and amperage in real-time! The F7 Flight Controller offers OSD, voltage monitoring, two BECs, and an interface for the DJI image transmission system. Build the perfect multirotor with this feature-packed, powerful combo!
Check out all our 30x30 stacks & combos, and our Hobbywing selection!
Features
Manual for the FC
Manual for the ESC
XRotor 65A 4in1 ESC
High performance 32-bit microprocessor with the running frequency of up to 120MHz for excellent performance.
Third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
Code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.
Also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost aircraft.
F7 Flight Controller Features
STM32 F722 MCU allows the FC to run the PID looptime and gyro with higher frequency.
Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)
The FC supports Betaflight firmware and allows parameter adjustment via Betaflight software is more applicable to FPV racing.
Onboard Flash chip can record and save flight/black box data allowing users to adjust the setup of their aircraft easily.
Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS and etc.
LED strip signal output port allows users to adjust the color and flash mode of the LED strip via the FC.
Volt/Amp monitoring port allows users to check the battery voltage (BAT port) and current (CRT port, extra current meter is needed).
Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.
Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters.
Board load 5V and 10V BEC, both can output 2A. It can supply power for receiver, VTX, LED lamp and others devices.
Specifications
XRotor F7 FC
Compatible with (Multirotors) Quadcopters
Firmware HOBBYWING_XROTORF7CONV
FC Programming Supported
Programming via Betaflight/ Cleanflight-configurator
Compatible with (Modes) PWM, Oneshot125, Oneshot42, Multishot, Dshot150,
Dshot300, Dshot600, PROSHOT1000
Compatible with (Transmitters) PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL
OSD Built-in
Voltage Monitoring Supported
Current Monitoring Supported
External Buzzer Supported
LED Control Supported
BEC 5V @ 1.5A ; 10V @ 1.5A
Size 32x32mm
Weight 3.3g
XRotor 65A BLHeli_32 ESC
LiPo Power input: 3-6S
Cont.Current: 65Ax4
Burst Current: 80Ax4
BEC Output: 5V@ 0.5A
Input wires: 12AWG-130mm* (Red/Black)
Output Wire: No wires but solder tabs
Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
Weight / Size: 15.0g / 32.7x18.4x6.2mm
Mounting holes: 30.5x30.5mm
Throttle Calibration: Supported
ESC Programming: BLHeliSuite32
Includes
1x Hobbywing XRotor F722 3-6S 30x30 Stack/Combo (F7 FC / 32Bit 65A 4in1 ESC)
1x Hardware Set
1x AMASS XT60 Connector
1x Cable Set
The Kakute F4 V2.4 is ready for DJI HD. Easily plug in and power your HD video transmitter (like DJI O3 Air Unit & Caddx Vista) with its on-board 9V/A regulator, plus 5 dedicated UARTs w/inversion for peripherals. This stack comes with a barometer, plus LED/buzzer pad & I2C for external GPS/Magnetometers. The Tekko32 is the first 4in1 ESC, featuring the powerful F4 MCU @150Mhz, giving you smooth control & fast response, 4~6S & BLHeli32 for 30x30 stack/combo. This stack will come with an Atlatl HV V2 800mW VTX that is compatible with all major FPV receivers.
Check out all our 30x30 Stacks and the rest of our HolyBro selection!
Features
Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.
Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.
SmartAudio input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.
All parameters are controllable via push-button on the side of the unit, for cases where SmartAudio is not used.
MMCX connector is durable and easy to use. Rated for 100’s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.
LED indicators for channel, band, and power. Allows easy check of vTX parameters simply by glancing at the quad.
Variable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.
0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.
Built in microphone, so you can listen to your motors while you fly, no matter how far away you fly.
Standard 36mm form factor allows you to mount the Atlatl directly on your flight controller stack.
New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Specifications
Holybro Kakute F4 HD V2.4 2-8S 30x30 Flight Controller
MCU: STM32F405
IMU: MPU6000
Barometer: BMP280
OSD: AT7456E
5x UARTs (1,3,4,4,6,7)
128 Mbit Dataflash chip
Battery input voltage: 2-8S
BEC 9V/3A - Optimized for DJI O3 Air unit
BEC 5V/2A
7x PWM Outputs (6 Motor Output, 1 LED)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire, ESLR).
Mounting: 30 x 30mm, Φ4mm hole with M3 Grommets
Dimension: 37x37mm
Weight: 7g
JST-SH1.0_8pin port (For 4in1 ESCs)
JST-SH1.0_6pin port (For DJI/Caddx HD System and other VTX)
Tekko32 F4 4in1 50A ESC
Continuous Current: 50A x4
Burst Current: 60A x4
Supports 4-6S battery
Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
ESC telemetry Supported
Onboard analog current sensor
No output BEC
BLHeli_32 firmware
1000uf 35v capacitor included (highly recommended for 6s setup)
Amperage meter scale ratio: 120 (V1.9 Version)
Dimensions: 48x37x6mm / Weight: 13.8g
Mounting holes: M4 30.5x30.5mm (M3 grommets included)
Atlatl HV V2
Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
Audio: 6.5 MHz Mono
Protocol smart audio 2.0
Antenna Connector: MMCX
Input Voltage: 7 to 28 volts (2-6S LiPo) with an absolute maximum 42 volts
Dimensions: 35x25x7mm (Includes USB height)
Mounting Holes: Standard 30.5mm square to center of holes
Weight: 9.3g
Includes
1x Holybro Kakute F4 HD V2.4 4-6S 30x30 Stack/Combo (F405 FC/ 50A F4 32bit 4in1 ESC & Atlatl HV V2 800mW VTX)
1x Wiring Kit
Wiring Diagram
The 8S capable Kakute H7 boasts Bluetooth, dual 4in1 ESC ports, HD plug, barometer, OSD, 6 UARTs, MicroSD Blackbox, 5V/9V BEC, easy soldering, and more. It builds upon F7 features and has a Bluetooth chip. The SpeedyBee app lets you Betaflight configure/tune wirelessly. It's DJI HD ready and supplies 9V for HD video transmitters. UART2 is for Bluetooth tel., MicroSD for Blackbox, dual 4in1 ESC ports for x8 Octocopter, and BetaFlight OSD for FPV display. LED/buzzer pad, I2C pad for external GPS/Magnetometer.
Check out our other 30x30 flight controllers and the rest of our HolyBro selection!
Features
This V1.3 now has USB-C, 9V 3A BEC for VTX, and JST-SH connector for VTX port.
Specifications
MCU - STM32H743 32-bit processor running at 480 MHz
Professional underfill epoxy for mechanical reinforcement
IMU - MPU6000
Barometer - BMP280
OSD - AT7456E
Onboard Bluetooth chip - ESP32-C3
SpeedyBee IOS & Android App Compatible
Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm) in Betaflight
6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
9x PWM Outputs (8 Motor Output, 1 LED)
2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8/Octocopter compatible)
1x JST-SH1.0 6pin VTX port (For HD System like Caddx Vista & Air Unit)
Battery input voltage: 2S - 8S
BEC 5V 2A Cont.
BEC 9V 3A Cont
USB Type-C
Mounting - 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
Dimension - 35x35mm
Weight - 8g
Includes
1x Holybro Kakute H7 V1.3 3-6S 30x30 Flight Controller w/ Bluetooth - MP6000
1x Wiring Kit
Wiring Diagram
The Holybro Kakute H7 has integrated Bluetooth, dual 4in1 ESC ports, HD camera plug, barometer, OSD, 6 UARTs, MicroSD card, 5V & 9V BEC, easy soldering layout, etc. Supporting DJI HD, its 9V regulator powers FPV Air Unit & Caddx Vista. With 6 UART ports & inversion, it offers unlimited Blackbox data logging. BetaFlight OSD displays info on FPV display, and barometer helps autonomous flight. LED & buzzer pad, I2C pad for external GPS/Magnetometer.
Check out all our 30x30 Stacks and the rest of our HolyBro selection!
Features
This V1.3 now has USB-C, 9V 3A BEC for VTX, and JST-SH connector for VTX port.
Specifications for HolyBro Kakute H7 V1.3 FC
MCU - STM32H743 32-bit processor running at 480 MHz
IMU - MPU6000
Barometer - BMP280
OSD - AT7456E
Onboard Bluetooth chip - ESP32-C3
SpeedyBee IOS & Android App Compatible
Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm) and turn on automatically when the flight controller is locked (disarm).
6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
9x PWM Outputs (8 Motor Output, 1 LED)
2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8/Octocopter compatible)
1x JST-SH1.0 6pin VTX port (For HD System like Caddx Vista & Air Unit)
Battery input voltage: 7V to 42V
BEC 5V 2A Cont.
BEC 9V 3A Cont
USB Type-C
Mounting - 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
Dimension - 35x35mm
Weight - 8g
Specifications for Tekko32 F4 4in1 50A ESC
Continuous Current: 50A x4
Burst Current: 60A x4
Supports 4-6S battery
Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
ESC telemetry Supported
Onboard analog current sensor
No output BEC
BLHeli_32 firmware
1000uf 35v capacitor included (highly recommended for 6s setup)
Amperage meter scale ratio: 120 (V1.9 Version)
Dimensions: 48x37x6mm / Weight: 13.8g
Mounting holes: M4 30.5x30.5mm (M3 grommets included)
Firmware Targets
BetaFlight: KakuteH7 (v4.2.11 and above)
INAV: KakuteH7 (4.0.0 & above) SD card support added in 4.1.0.
ArduPilot: KakuteH7 (4.2.0 & above)
Includes
Holybro Kakute H7 V1.3 Tekko32 F4 50A 4-6S 30x30 Stack/Combo (H7 FC / 50A F4 32bit 4in1 ESC)
1x Wiring Kit
Wiring Diagram
Using HQ Prop's Race Gate (Fabric Only), take your racing game to the next level.
Check out all our Swag related products and all our HQProp products!
Specifications
Drone Racing Gate 5ft x 5ft
Size: 5ft x 5ft Opening（152.44x152.44cm）
Weight：550g
(Not include PVC or conduit pipe)
Includes
1x HQ Prop FPV Racing Gate (Fabric Only)
Efficiency, feel, and POP! That's what pilots love about the V1S 5" prop from HQ. With a highly tuned design, the 5x4.3x3 is made to make all of your 5" FPV dreams come true. The package includes 4 props (2cw and 2ccw), and we carry all available colors.
Check out all our 5" Props and all our HQProp products!
Specifications
Length: 5 inch
Pitch: 4.3
Blades: 3
Material: Poly Carbonate
Hub Diameter：13.2mm
Hub Thickness：7.1mm
Shaft: 5mm
Weight: 3.75g
Includes
4x HQ Prop 5x4.3x3 V1S Tri-Blade 5" Prop (2CW, 2CWW)
Efficiency, feel, and POP! That's what pilots love about the V1S 5" from HQ Prop. With a highly tuned design, the 5x4.5x3 is made to make all of your 5" FPV dreams come true.
Check out all our 5" Props and all our HQProp products!
Specifications
Propeller Diameter: 5 inch
Pitch: 4.5
Blades: 3
Material: Poly Carbonate
Weight: 4.19g
Hub Diameter : 12.8mm
Hub Thickness:6.8mm
Shaft:5mm
Adaptor Rings: No
Includes
4x HQ Prop 5x4.5x3 V1S Tri-Blade 5" Prop (2CW, 2CCW)
The 3.5" prop is a newcomer to the FPV world, HQ Prop has worked quickly to put a ducted version for your Cinewhoops. This prop is a perfect blend of thrust, efficiency, and quietness.
Check out all our 3" Props, and all our HQProp products!
Specifications
Propeller Diameter: 89MM
Pitch : 3
Blades: 8
Material: Poly Carbonate
Weight: 3.9g
Hub Diameter: 11.9mm
Hub Thickness: 5.5mm
Shaft: 5mm
Adaptor Rings: NO
Includes
4x HQProp Duct 89MMX8 Octa-Blade 3.5" Cinewhoop Prop (2CW, 2CCW)
Evan Turner has teamed up with HQ Props to give us this amazing racing prop. Tested and tuned by HeadsUp FPV himself, these props are sure to please.
Check out the rest of our 5" props, and all our HQ Prop selection!
Specifications
Diameter: 4.9"
Pitch: 4"
Blades: 3
Material: Polycarbonate
Hub Thickness: 7mm
Shaft Hole: 5mm
Weight: 4.2g
Includes
4x HQ Prop HeadsUp Racing R38C Tri-Blade 4.9" Props - Clear
Your motors and ESCs generate electrical noise that can be detrimental to your video quality. The most common symptoms of electrical noise are lines and dots in your FPV feed, especially when accelerating. These little filters can help clean up the noisy power running into your sensitive FPV electronics.
Take a look at our PDB & BEC selection, as well as the rest of our iFlight offerings.
Features
Perfect for sensitive FPV- and RC components in a single battery setup.
Both the negative and positive leads are filtered (common mode)
Suitable for setups up to 36V
Reduces DC-DC switcher supply ripple and helps clean noisy power from a shared battery.
Reduce the effects of interference radiated through the air and noise conducted via the power wires.
Help attenuation most of the high-frequency power supply noise and interference.
Suppress the noise in the power getting to your FPV setup (e.g. your VTX and FPV camera).
Built-in Reverse Polarity protection
Very low voltage drop
Specifications
Input Voltage: 5-36V
Max. Input Current: 3A
Weight: 1.1g
Includes
1x iFlight 5-36V LC Filter Module
The iFlight AOS 7 EVO 7" Frame Kit is perfect for freestyle drone racing. Constructed with 8mm arm thickness for superior durability and reliability, the kit features 25.5x25.5 or 20x20mm stack mountings in the front, center, and rear. It fits the DJI O3 Air Unit, Caddx Vista, or HDZero Freestyle VTX and both 20mm (DJI and O3 camera) and 19mm (micro-sized) cameras. Standoffs, frame, and screws are included.
The AOS 7 builds on the scientific approach used to design the AOS 5 and AOS 5.5, extending the benefits of those designs to the 7" class. Until now, 7" quads have been primarily used for long-range cruising and have never been able to match the performance of 5" quads for aggressive freestyle flying. The AOS 7 EVO 7" frame kit is here to break that conception.
The latest version of this frame is the AOS 7 EVO. It has an updated camera, top and bottom plates to support the DJI O3 Air Unit, and all other 19-20mm FPV cameras.
With the V1.2 updated side plates and silicone dampers. Frame kit upgrade to the top plate with two antenna cutouts. Making this frame more ideal and suited for the DJI O3 Air Unit.
Check out all of our 7" frames and our selection of iFlight gear!
Make sure to check out our other O3 compatible frames!
Features
25.5x25.5 or 20x20mm stack mountings in the front, center and rear.
Fits the DJI O3 Air Unit, Caddx Vista or HDZero Freestyle VTX perfectly
Fits both 20mm (DJI and O3 camera) and 19mm (Micro sized) cameras
Standoffs, frame and screws included
Specifications
Product Name: AOS 7 EVO V1.2 Frame Kit
Frame wheelbase: 293mm
Frame Dimension: L228xW284xH34.5 mm
Arm Thickness: 8mm
Top Plate Thickness: 2mm
Bottom Plate Thickness: 2mm
Upper Plate Thickness: 2.5mm
Motor Mounting: 19x19mm
VTX Mounting: 20x20/Φ2mm / 25.5x25.5/Φ2mm
Weight: 290±5 grams (Included TPU Parts)
Includes
1x iFlight AOS 7 EVO 7" V1.2 Frame Kit
1x TPU Parts
4x Motor Wire Shield Tube
1x Screw Bag
2x Battery Strap
Introducing the BOB57, a 6" cinematic long-range quad pre-installed with the all-powerful DJI O3 system for crystal clear image quality. This quad aims to best of 5" and 7", hence the name BOB57. This quad is DJI PNP, meaning it does not come with a receiver, meaning you need to install your receiver. However, if you have the DJI FPV Remote Controller 2, you can bind to the O3 Air Unit. This quad also comes with a GPS pre-installed, allowing all the marvelous features a GPS allows you. The BOB57 comes with XING2 2506 motors with a rated KV 1500, designed around 6S power.
The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot & videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights.
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products
Features
Hybrid motor design optimized for that can be used with both bi-blade and tri-blade 6" propellers.
High-end GPS is used to minimize the risk of failure during proximity flights
Long backbone with enough space up to fit 3000mAh 6S batteries
Solid antenna mount for less oscillations when using long antennas
Gladiator shell protects from dust and water droplets
ESCs with built-in spike absorbers for more reliability
Built-in BEC to directly power a GoPro camera
9-minute flight time with 3000mAh 6S Lipo
Front-mounting XT-60
DJI O3 Air Unit
VERSATILE BODY
The Body is designed to carry small to large batteries for agile or long-range missions.
SMART XT60 AND USB-C PLUG
The XT60 plug is located in the front to gain more space. With the USB-C plug you can directly power your GoPro/Action Cams.
OPTIMIZED MOTOR AND PROPS
The Motor is designed for 6inch to give both great performance and efficiency. The prop is specifically optimized for this drone.
RELIABILITY
The BOB57 comes with a shell that protects against hits, droplets, and dust. It also has a high-quality GPS and components for more reliability, like a spike absorber & extra capacitor.
PRE-TUNED AND PRE-SETUP
Don't worry about tuning, iFlight did that for you already! A basic PID and Filter tuning were applied for a great flight experience!
Links
Ellis van Jason Tune Setup
Specifications
Product Name: BOB57 O3 6S HD BNF
FC: BLITZ F722
ESC: BLITZ E55 55A 4-IN-1 ESC
Video Transmission: DJI O3 Air Unit
Frame: 280mm wheelbase
Motor: XING2 2506 motors
Prop: GEMFAN 6032-3 propellers
Takeoff Weight: Approx. 580 g
Dimensions (L×W×H)：226×166×34 mm
Max Speed: 180 Km/h (Manual Mode)
Maximum Takeoff Altitude: 7000 m
Max Hover Time: Approx. 8 mins (With 6S 1400 no load.)
Max Wind Speed Resistance: Level 7
Operating Temperature Range: -10° to 40° C (14° to 104° F)
Antennas: 2 Antenna
GNSS: GPS+SBAS+Galileo+QZSS+Glonass
Video Transmission
Product Name: DJI O3 Air Unit
Weight: Approx. 36.4 grams（headband included）
Dimensions (L×W×H): L32.5x W30.5xH 14.5mm
Communication Bandwidth： Max 40 MHz
FOV (single screen): 155°
Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz
End-to-End Latency
With DJI FPV Goggles V2:
810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
With DJI Goggles 2:
1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
Max Video Transmission Bitrate: 50 Mbps
Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10º to 40º C (14° to 104° F)
Power Input: 7.4-26.4 V
Audio Transmission: N/A
Includes
1x BOB57 6S HD BNF
2x Antennas
2x Battery pads
2x Prop(Pairs)
All batteries must be shipped by a ground shipping method.
Introducing iFlight's Defender 25, a sub-250 drone featuring the DJI O3 Air Unit. At 249g weight, Defender 25 doesn't require registration in most countries. The compact and lightweight design also make it easy to carry and store. It will be your best travel buddy to redefine your FPV adventure. The built-in 2.5-inch propeller guards were designed to fly boldly. You’ll experience a completely new creative freedom to fly whenever and wherever. The durable injection molded frame not only prevents damage to your motors or propellers but also protects the environment from small flight errors.
Equipped with the latest tech from DJI, the O3 Air Unit HD transmission system, the Defender 25 supports 4K video and shoots up to 155° super-wide FOV footage for stunning visuals. In addition, D-Cinelike color mode provides more creative freedom for color grading, allowing you to edit and adjust your footage.
They’ve also added a special vibration-damped camera mount to keep your raw footage as smooth as possible, as well as ensure good Gyro Data for the built-in or in-post camera stabilization.
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!
Features
Optimized Landing Gear for Take-Off in Complex Environments
Built-in High-Performance video and Receiver Antennas
4K Stabilized Video with 155° Ultra-Wide Angle
Crash-Protected Quick-Release Battery
Countless Easy-to-Use Features
Ultralight and Free to Fly
Small and Mighty
Specifications
Defender 25
Product Name: Defender 25 4S HD
Flight Electronics: BLITZ D25 F7 AIO
Video Transmission: DJI O3 Air Unit
Frame: 112±2mm
Motor: Defender25 1404
Prop: Defender25 2525 props (2.5-inch)
Weight of the Aircraft: 180g
Takeoff Weight incl. 550mAh battery: ≤249g
Dimensions (L×W×H)：158x155x69mm
Max Ascent Speed: 6 m/s (Normal Mode, Sport Mode)
Max Descent Speed: 6 m/s (Normal Mode, Sport Mode)
Max Speed: 100Km/H (Manual Mode)
Maximum Takeoff Altitude: 200 m
Max Hover Time: Approx. 6 mins (with 550mAh battery), 10mins (with 900mAh battery)
Max Flight Distance: 2-3 km
Max Wind Speed Resistance: 80 Km/H (Level 5)
Operating Temperature Range: -10° to 40° C (14° to 104° F)
Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm
Antennas: Dual Antennas
GNSS: N/A
Video Transmission
Product Name: DJI O3 Air Unit
Weight: Approx. 36.4grams
Dimensions (L×W×H): L16.7×W103.9×H 81.3mm
Screen Size (single screen): 0.49-inch
Resolution (single screen): 1920×1080
Refresh Rate: Up to 100 Hz
Interpupillary Distance Range: 56-72 mm
Diopter Adjustment Range: -8.0 D to +2.0 D
FOV (single screen): 51°
Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz
Transmission Power (EIRP):
2.4 GHz: < 30 dBm (FCC), < 20 dBm (CE/SRRC/KC)
5.8 GHz [4]: < 30 dBm (FCC), < 23 dBm (SRRC), < 14 dBm (CE/KC)
Max Video Transmission Bitrate: 50 Mbps
Operating Temperature Range: 0° to 40° C (32° to 104° F)
Power Input: 7-9 V (1.5 A)
Recommended (Not Included)
iFlight Defender 25 Battery - 900mAh
Includes
1x iFlight BNF Defender 25 HD 4S 2.5" Cinewhoop w/ DJI O3 Air Unit and DJI Camera (Pre-Built, Tuned, and Tested)
1x Defender 25 550mAh Battery
1x Charging Adapter Board
2x Defender 25 2525 Props (pairs)
The iFlight Nazgul5 V3 6S 5" Freestyle Analog Quad is here! It includes the RaceCam R1 FPV Camera and Nazgul 5" tri-blade props, XING-E Pro 2207 motors, BLITZ F7 Flight Controller, BLITZ 1000mW+ VTX, and the BLITZ E45S 2-6S 45A BLHeli32 4-in-1 ESC. Boasting CNC aluminum camera mount with vibration-reduction silicone for increased protection. Great for freestyling and long-distance shots with your GoPro camera! The Nazgul5 Freestyle quad is a go-to gold standard for freestyle BNFs of great value made by the great people at iFlight. The Nazgul5 V3 is a 5" freestyle frame is made of super stiff carbon for minimal resonance.
+ High-quality parts+ Sturdy frame structure+ Generous mounting space+ Optimized for O3 Air Unit+ GoPro camera mount included
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!
Features
XING-E Pro 2207 motors and NAZGUL F5 props
5" version also fits 5.1" style propellers
Fits both 30.5x30.5 and 20x20 stacks
5mm arm design for more durability
Popular True-X configuration
LED illuminated logo
TPU crash-guards
Easy-Swap arms
Specifications
Product Name：Nazgul5 V3 6S Analog
FC: BLITZ F722 FC
ESC: BLITZ E45S 45A 4-IN-1 ESC
Video Transmission: BLITZ 1mW+ VTX
Frame: 245 ±2 mm wheelbase
Motor: XING-E Pro 2207 motors
Prop: Nazgul 5 inch propellers
Takeoff Weight: Approx. 435g / 660±10g (With 6S 1400mAh Battery)
Dimensions (L×W×H): 173×173×34±2 mm
Diagonal Distance: 245mm
Max Speed: 190 Km/h (Manual Mode)
Maximum Takeoff Altitude: 3200 m
Max Hover Time: Approx. 7.5 mins (No Load with 6S 1400mAh Battery)
Max Flight Distance: 5 km
Max Wind Speed Resistance: Level 7
Operating Temperature Range：-10° to 40° C (14° to 104° F)
Antennas: Single Antenna
Video Transmission System
Product Name: BLITZ Whoop 1mW+ VTX
Input voltage: 7V～34V
Interface: MMCX
Power levels: PIT/25mW/400mW/800mW/1600mW
Channels: 40 (including Raceband)
Mounting pattern: 30.5x30.5mm/Φ3
Lightweight: 18.9g (excluding antenna)
VTX telemetry: IRC Tramp
Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight!
RC Tramp VTX table values: 25mW/400mW/800mW/1600mW
Includes
1x Nazgul5 V3 6S Analog BNF
1x Antennas
2x Battery pads
2x Nazgul F5 Prop(Pairs)
The Nazgul5 HD V3 is loaded with lots of power and performance; it comes with the XING-E Pro 2207 6S motors, BLITZ F722 FC, and BLITZ E45S 45A 4-in-1 ESC, which makes this quad a must-have! Now with the DJI O3 Air Unit! The Nazgul V3 is one of the best freestyle frames for its value. The Nazgul5 V3 HD has been pre-tuned and set up with everything you need, all you need to do is bind-and-fly. The Nazgul5 V3 is a 5" freestyle frame made of super stiff carbon for minimal resonance.
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!
Features
XING-E Pro 2207 motors and NAZGUL F5 props
5" version also fits 5.1" style propellers
Fits both 30.5x30.5 and 20x20 stacks
5mm arm design for more durability
Popular True-X configuration
LED illuminated logo
TPU crash-guards
Easy-Swap arms
Specifications
Operating Temperature Range：-10° to 40° C (14° to 104° F)
Max Wind Speed Resistance: 130 Km/H (Level 4)
Receiver: DJI BNF, ELRS
Dimensions (L×W×H): 180×180×80 mm
Max Speed: 130 Km/h (Manual Mode)
Video Transmission: DJI O3 Air Unit
Maximum Takeoff Altitude: 5000 m
Product Name：Nazgul5 V3 6S HD
ESC: BLITZ E45S 45A 4-IN-1 ESC
Max Hover Time: Approx. 8 mins
Motor: XING-E Pro 2207 motors
Takeoff Weight: Approx. 620 g
Prop: Nazgul 5 inch propellers
Diagonal Distance: 245mm
Frame: 255mm wheelbase
Max Flight Distance: 5 km
Antennas: 2 Antenna
FC: BLITZ F722
GNSS: N/A
Video Transmission
Product Name: DJI O3 Air Unit
Weight: Approx. 36.4 grams（headband included）
Dimensions (L×W×H): L32.5x W30.5xH 14.5mm
Communication Bandwidth： Max 40 MHz
FOV (single screen): 155°
Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz
End-to-End Latency
With DJI FPV Goggles V2:
810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
With DJI Goggles 2:
1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
Max Video Transmission Bitrate: 50 Mbps
Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10º to 40º C (14° to 104° F)
Power Input: 7.4-26.4 V
Audio Transmission: N/A
Includes
1x iFlight BNF Nazgul5 V3 HD 6S 5" Freestyle Quad w/ DJI O3 Air Unit & Micro Cam - Choose Receiver
2x Nazgul 5 inch propellers (Set of 4)
2x Battery Pad
2x Antenna
The perfect upgrade part for your DJI Air Unit to avoid buying fragile stock antennas again and again...
Check out all our iFlight gear and our DJI FPV System Parts & Accessories!
Specifications
Frequency range: 5000-6000MHz
Gain: 3Dbi
Cable：RG141
Axial Ratio: 0.7
Interface: LHCP RP-SMA
Polarization: LHCP
SWR: ≤1.5 (ON 5.8GHz)
Weight: 4.2g/pc
Includes
2x iFlight Crystal HD 5.8GHz RP-SMA Stubby Antenna for DJI - LHCP
Let's welcome our new iFlight Crystal HD 5.8GHz Directional Antenna! Specially designed for the DJI Digital FPV Goggles to replace the stock front plate with our iFlight engineered Antenna Array. NO, this is not another patch antenna! Two carefully designed and highly sensitive LHCP high gain directional antennas give you a better reception at long range as well as better penetration through trees, bandos or other difficult terrains. Low profile design to decrease your pack size to a minimum, and high quality RG178 cables for best durability. We were able to achieve a super wide antenna beam width through an offset angle of 30 degrees between the two antennas. Horizontal beam of 105° and vertical beam of 75 degrees at 9dBi gain, dropping of slowly the further you get to the side! Low loss with a 93% antenna efficiency and a axial ratio of ≤1.6 through the whole band. If that's not enough, we also gave you the option to either mount your antennas at the bottom or top pair of the Goggle RP-SMA connectors. Multiple designs available, get them as long they last!
Check out all our iFlight gear and our DJI FPV System Parts & Accessories!
Features
3 designs available, Black Carbon, Blue Sticker Design, Red/Yellow Color Design.
LHCP high gain directional antenna array.
Lower profile and better reception than stock antennas.
Super wide beam width, horizontal 105° @9dBi, vertical 75° @9dBi.
Can be mounted on top or bottom Goggle RP-SMA pair.
Specifications
Frequency: 5.8GHz
Bandwidth: 5600~5900 Mhz
Gain: 9 dBi
Axial ratio: ≤1.6
Impendance: 50Ω
Radiation Efficiency: 93%
Beam Width: 105° H. 75° V.
Polarization: (LHCP) Left Hand Circularly Polarized
Cable: RG178
Connector: RP-SMA (Fits DJI Goggles directly, not to be used on standard SMA)
Dimensions: 16mm x 7mm x 3mm
Weight: 52.1g
Includes
1x iFlight Crystal HD Patch 5.8GHz RP-SMA Antenna for DJI - LHCP
2x iFlight Crystal HD Stubby 5.8GHz RP-SMA Antenna for DJI - LHCP
This multipurpose 4-in-1 prop tool by iFlight comes with a one way bearing 5mm prop nut driver and M1.5/M2 hex drivers to help with your fpv needs!
Check out our other prop tools, nuts, and accessories, as well as the tools and building supplies section!
Includes
1x iFlight Quad Wrench
This motor has been specially developed for Race drones, such as the Mach R5 Racing drone. Thanks to advanced construction in the manufactory, its smooth, reliable and powerful performance is improved yet again. By introducing new center-slotted N52H curved arc magnets, the motor's response time is drastically shortened. As a result of the high quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current), causing more efficiency and higher power!
iFlight is one of the most respected companies in the FPV community when it comes to premium motors; this is one of them.
Check out our iFlight selection and our entire selection of motors!
Specifications
Model: R5 2207 Motor
KV: 2050KV
Weight(included wire): 34.6g
Dimension: 28.x31.5mm
Interphase Resistance: 56.3mΩ
Input Volts: 25.2V
Peak Current: 49.53A
Max Watt: 1166.4W
Mounting Holes: 16x16 φ3mm
Shaft Diameter: 5mm
Shaft Protruding Length: 12.5mm
Lead: 150mm/20AWG
Magnet: N52H Curved
Configuration: 12N14P
Bearing Type: NSK
Bearing Specification: φ9xφ4x4
Winding: Single Strand copper winding
Includes
1x iFlight R5 2207 2050Kv Motor
4x M3x8
1x M5 Flanged Nylon Insert Lock Nut
Type C 90° connector for the DJI FPV system.
Check out our DJI compatible quads and accessories, and all our iFlight gear!
Specifications
1x iFlight USB C 90° Adapter for DJI Air Unit
iFlight's 2nd gen Xing lineup has raised the bar when it comes to FPV motors. The high manufacturing standards and premium performance offered by the Xing line have been improved upon, offering upgrades such as center slotted curved arc magnets, tighter gaps between magnet and stator, higher power output, and improved efficiency.
Available in multiple Kv options!
Check out all our Micro Motors and our selection of iFlight gear!
Specifications
Voltage: 2S-4S
KV Option: 4600Kv
Configuration: 9N12P
Stator Diameter: 14mm
Stator Length: 4mm
Shaft Diameter: 1.5mm
No.of Cells(Lipo): 2-4S
Internal resistance: 0.28Ω
Mounting pattern: 9*9-φ2mm
Bearing: 5*2*2.5mm
Wire: 120mm/26AWG
Weight: 8.5g (without cable)
Includes
1x iFlight Xing 2 1404 4600Kv Micro Motor
All black motor with the iFlight logo, with the classic 2207 stator size most ideal for freestyle and racing. This motor is rated at 1750Kv, which is designed for 6S power!
The smooth, reliable and powerful XING motors were upgraded and we achieved an even higher standard in our manufactory as well as better performance than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of the motor! Maybe the biggest bottleneck of our FPV flight controller is the motor due to it's translation delay of it braking and accelerating. XING2 motors offer faster response to translate your PID loop quicker and get that locked-in feeling you were always looking for!
Due to the high quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current) causing more efficiency and higher power!
Check out our vast motor selection, and all our iFlight gear!
Features
5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 9x9x4 bearings
Center-slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced
Specifications
KV: 1750KV
Weight(included wire): 30.5g
Dimension: φ29x19.25mm
Interphase Resistance: 74.23mΩ
Input Volts: 25.2V
Peak Current: 36.3A
Max Watt: 898W
Mounting Holes: 16x16 φ3mm
Rotor Specifications: Unibell
Shaft Diameter: 5mm
Shaft Protruding Length: 13.5mm
Lead: 160mm
Magnet: N52H Curved
Configuration: 12N14P
Bearing Type: NSK
Bearing Specification: φ9xφ4x4
Winding: Single Strand copper winding
Includes
1x iFlight Xing2 2207 1750Kv Motor
iFlight's 2nd gen Xing lineup has raised the bar when it comes to FPV motors. The high manufacturing standards and premium performance offered by the Xing line have been improved upon, offering upgrades such as center slotted curved arc magnets, tighter gaps between magnet and stator, higher power output, and improved efficiency.
Check out our vast motor selection, and all our iFlight gear!
Features
5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 9x9x4 bearings
Center slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced
Specifications
Kv: 1855Kv
Version: CW Screw Thread
Input Voltage: 4S Lipo
Configuration: 12N14P
Stator Diameter: 22mm
Stator Length: 7mm
Wire length: 20AWG 160mm
Mounting pattern: 16*16mm
Weight: 31.6g with short wire
Includes
1x iFlight Xing 2 2207 1855Kv Motor
iFlight's 2nd gen Xing lineup has raised the bar when it comes to FPV motors. The high manufacturing standards and premium performance offered by the Xing line have been improved upon, offering upgrades such as center slotted curved arc magnets, tighter gaps between magnet and stator, higher power output, and improved efficiency.
Check out our vast motor selection, and all our iFlight gear!
Features
5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 9x9x4 bearings
Center slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced
Specification
KV: 1755Kv
Version: CW Screw Thread
Input Voltage: 6S Lipo
Configuration: 12N14P
Stator Diameter: 23mm
Stator Length: 6mm
Wire length: 20AWG 160mm
Mounting pattern: 16*16mm
Weight: 31.6g with short wire
Includes
1x iFlight Xing 2 2306 2555Kv Motor
iFlight's 2nd gen Xing lineup has raised the bar when it comes to FPV motors. The high manufacturing standards and premium performance offered by the Xing line have been improved upon, offering upgrades such as center slotted curved arc magnets, tighter gaps between magnet and stator, higher power output, and improved efficiency.
Check out our vast motor selection, and all our iFlight gear!
Features
5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 9x9x4 bearings
Center slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced
Specification
KV: 2555Kv
Version: CW Screw Thread
Input Voltage: 4S Lipo
Configuration: 12N14P
Stator Diameter: 23mm
Stator Length: 6mm
Wire length: 20AWG 160mm
Mounting pattern: 16*16mm
Weight: 31.6g with short wire
Includes
1x iFlight Xing 2 2306 2555Kv Motor
We're finally ready to announce our predecessor the XING2!
The smooth, reliable and powerful XING motors were upgraded and iFlight has achieved an even higher standard as well as better performance in motors than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of the motor. Maybe the biggest bottleneck of our FPV flight controller is the motor due to its translation delay of it braking and accelerating. XING2 motors offer faster response to translate your PID loop quicker and get that locked-in feeling you were always looking for!
Due to the high-quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current) causing more efficiency and higher power!
Check out our vast motor selection, and all our iFlight gear!
Features
5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 10x4x4 bearings
Center slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced
Specification
KV: 1500Kv
Input Voltage: 6S Lipo
Configuration: 12N14P
Stator Diameter: 25mm
Stator Length: 6mm
Wire length: 20AWG 160mm
Mounting pattern: 16x16mm
Weight: 38.2g with wires
Includes
1x iFlight Xing 2 2506 1500Kv Motor
We're finally ready to announce our predecessor the XING2!
The smooth, reliable and powerful XING motors were upgraded and iFlight has achieved an even higher standard as well as better performance in motors than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of the motor. Maybe the biggest bottleneck of our FPV flight controller is the motor due to its translation delay of it braking and accelerating. XING2 motors offer faster response to translate your PID loop quicker and get that locked-in feeling you were always looking for!
Due to the high-quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current) causing more efficiency and higher power!
Check out our vast motor selection, and all our iFlight gear!
Features
5mm titanium alloy shaft, our strongest prop shaft ever!
Crash resistant 7075 aluminum bell
Smooth and long-lasting NSK 10x4x4 bearings
Center slotted N52H curved arc magnets
XING O-ring bearing gap protection
Motor wires protector
Dynamically balanced
Specification
KV: 1850Kv
Input Voltage: 6S Lipo
Configuration: 12N14P
Stator Diameter: 25mm
Stator Length: 6mm
Wire length: 20AWG 160mm
Mounting pattern: 16x16mm
Weight: 38.2g with wires
Includes
1x iFlight Xing 2 2506 1500Kv Motor
1x M5 Flanged Nylon Insert Lock Nut
4x M3x8mm Screws
There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp, we set out to raise the bar on video transmitter technology. With Ghost, we set out to redefine the norms in receivers for R/C control. And now we have fused these two together, in the groundbreaking Ghost Hybrid. Designed by pilots, built by pilots, supported by pilots.
Check out the entire Ghost RC System, as well as the rest of our ImmersionRC selection!
Features
Two full receiver channels (not just dual antenna)
Only 2.2g, perfect for the popular sub-250g class
Extreme Range AND Low Latency
500Hz R/C Link Updates (HW is 1kHz ready)
2.4GHz Lora OR FLRC control modes, for the best performance in any environment
Integrated 5.8GHz 25mW - 600mW Video Transmitter
Thermally Regulated, Factory Calibrated
Specifications
Input Voltage: 5V
VTX Output Power: 25-600mW
Antenna Connector: U.FL
Power/Video Connection: Solder Pads / Plug
Frequency Range : 2406 - 2479MHz
Modulation: Chirp Spread Spectrum + Adaptive FHSS
Binding: Bidirectional with confirmation and protocol negotiation
RF Profiles: Race, Pure Race, ‘Normal’, and Long Range, more to come
Downlink Tx Power: +13dBm
Sensitivity: -117dBm in Long Range mode
Serial Formats: SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted
Firmware: Over-the-air (OTA) upgradable
Stack Size: 20x20mm, 25x25mm
Dimensions: 31.5x30mm
Weight: 2.2g
Includes
1x ImmersionRC Ghost Hybrid DUO V2 2.4GHz Receiver & 20-600mW 5.8GHz VTX
There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp, we set out to raise the bar on video transmitter technology. With Ghost, we set out to redefine the norms in receivers for R/C control. And now we have fused these two together, in the groundbreaking Ghost Hybrid. Designed by pilots, built by pilots, supported by pilots.
Check out the entire Ghost RC System, as well as the rest of our ImmersionRC selection!
Features
Only 2.2g, perfect for the popular sub-250g class
Extreme Range AND Low Latency
500Hz R/C Link Updates (HW is 1kHz ready)
2.4GHz Lora OR FLRC control modes, for the best performance in any environment
Integrated 5.8GHz 25mW - 600mW Video Transmitter
Thermally Regulated, Factory Calibrated
Specifications
Input Voltage: 5V
VTX Output Power: 25-600mW
Antenna Connector: U.FL
Power/Video Connection: Solder Pads / Plug
Frequency Range : 2406 - 2479MHz
Modulation: Chirp Spread Spectrum + Adaptive FHSS
Binding: Bidirectional with confirmation and protocol negotiation
RF Profiles: Race, Pure Race, ‘Normal’, and Long Range, more to come
Downlink Tx Power: +13dBm
Sensitivity: -117dBm in Long Range mode
Serial Formats: SBus, SBus-Fast (200k), SRXL-2 (400k), GHST, SBus Inverted
Firmware: Over-the-air (OTA) upgradable
Stack Size: 20x20mm, 25x25mm
Dimensions: 31.5x30mm
Weight: 2.2g
Includes
1x ImmersionRC Ghost Hybrid UNO V2 2.4GHz Receiver & 20-600mW 5.8GHz VTX
Want to stand out with your ImmersionRC rapidFIRE? Don't feel like sanding the red of the current module bay door? No worries, we carry translucent (see-through) and unpainted white. Now your rapidFIRE module will be eye-catching! Get yours today!
Note: The color red was added, as a replacement module cover for the ImmersionRC rapidFIRE video receiver module.
Check out our other FPV goggles and accessories and our ImmersionRC collection!
Includes
1x ImmersionRC rapidFIRE Goggle Module Bay Door - Choose Your Color
The rapidFIRE technology 'fuses' together the images from two 5.8GHz A/V receiver modules into one beautiful, interference-free image. Tearing and rolling are eliminated and our advanced noise-detection algorithms guarantee a clean and stable image at all times. The rapidFIRE module is optimized for use in environments with multi-path interference such as indoor racing, flying in abandoned buildings etc. but also offers superb sensitivity and selectivity outdoors and for long range use.
Pairs great with ImmersionRC Diversity Antenna Bundle!
Check out our other FPV goggles and accessories!
Features
Compatible with all Dominator LCD goggles including v1, v2, v3, SE, HD1, HD2, HD3, HDO, and Attitude v3/v4.
For Attitude and HDO goggles, the module is plug and play.
Future-proof with USB port, allowing future firmware updates.
Easy menu navigation... no 'single button user interface here', a 5-way joystick is used to scroll around the responsive OLED display, with feedback of critical parameters displayed on the OSD.
Built-in spectrum analyzer, favorites channels with live single-channel spectrum display for manual tuning, and band scanning.
When used to time races, the rapidFIRE technology eliminates dropped frames from the FatShark DVR. Finally DVR footage can be compared for photo-finishes.
Includes
1x ImmersionRC rapid FIRE Goggle Receiver Module
"Every FPVers Toolbox Needs One…"
FPV is made possible thanks to two RF links, a control link, and a video link. Without an RF Power Meter, a pilot has no way to test these critical RF links.
The ImmersionRC RF Power Meter V2 makes testing critical RF links for FPV simpler and more affordable. Featuring an internal battery and attenuator, this power meter can accurately help you measure your RF links, giving you the accurate information you need to fly the skies. This tool provides a cost-effective way to measure the power emitted by RF sources such as video transmitters and R/C radios. Meaning this device will easily allow you to visualize the power emitted.
Test equipment for microwave (GHz) links is not cheap. ImmersionRC changed this several years ago and provided our ‘Power Meter V1’ to the FPV community. The V2 is the result of listening to customer feedback. With a added internal battery, an internal attenuator, and a few features that every FPVer needs.
Check out our tools and building supplies as well as our entire ImmersionRC collection!
Features
Accurate RF Power Measurements
Touch-Free Race Compliance
PowerScope Mode
Average, or Peak Measurements
Integrated Li-ion Battery
Specifications
Power Level: -20dBm up to +30dBm
Calibrated Frequencies: 35, 72, 433, 1200, 2400, 5600-6000MHz in 50MHz steps
Accuracy: +/- 0.5dB
Attenuator: 30dB (Internal)
Battery: Internal 3.7V Lithium Ion cell, 10440 size, 600mAh
Current Consumption: ~35mA
Battery Life: ~8 hours
Auto Shutdown: 5 minute timeout
Charging: Micro USB cable
Display: OLED, 128×64 pixels, monochrome
User Input: Joystick
Interfaces: USB, power control via CDC
Antenna: 5.8GHz ‘Sniffer Antenna’ (linearly polarized ~2dBi dipole)
Adapter: Male to Male SMA adapter
UPC: 840630182215
Width: 8.6CM
Length: 6.5CM
Height: 3.2CM
Weight: 40g
Resources
Manual
Includes
1x ImmersionRC RF Power Meter V2
For quick angle changes while filming, not many mounts can beat the standard GoPro tab and slot design. However the stock GoPro bolt leaves a lot to be desired for FPV use.Impulse's new bolt is machined from aluminum for substantial weight savings and has an 8mm hex on the outside, along with an internal 2.5mm hex broach.Make quick changes to your GoPro angle using either the standard hex driver for M3 bolts, or the prop tool for M5 nuts, which you already have with you in your flight bag.
Check out our full range of ImpulseRC Gear!
Includes
1x ImpulseRC Apex Universal GoPro Mount
1x Bolt
1x Nut
Kotking is a clear silicone based water resistant coating for electronics. Kotking is water resistant and designed to dissipate heat, it will not melt off during those full throttle punch outs. When applied properly, Kotking will prevent damage from exposure to liquids.
Check out our other building tools and supplies!
Specifications
Color: Clear/transparent
Size: 15mL
Material: Silicone Based
Includes
1x Kotking Water Resistant Electronics Coating - 15ml
Instructions
Tear down all parts so you can easilly put KOTKING on them, no need to unsolder
Clean up all surfaces with air blower, brush, or cloth to avoid dust, oil, moist or any other things that cover it
Apply KOTKING to all components such as flight controller, VTX, camera boards evenly and slowly you can use our tiny brush or wood stick to make them even
put them in balanced potition and let them dry for about 15-20 mins, and you can do the same for the low side later
To coat FPV camera you can put KOTKING on camera connector, on camera case especially on connection between case,and FPV camera focus ring
Do not coat wiring harness connectors
Do one side at a time or until KOTKING dry and you can do the other side
TPU lens protector for the DJI Air Unit Camera. Fits tightly around the lens.We also carry the Official DJI Lens Protector Kit, and replacement camera modules, as well as the rest of the DJI Digital FPV System.
Check out the rest of our DJI Compatible Gear and all our 3D printed accesories, and remember if you need something custom printed, we do that too!
Includes
1x Lens Protector for DJI FPV Camera - 3D Printed TPU - Black
The Luma 25 Frame Kit from Luma Quads is designed for Naked GoPro applications. This modern-designed frame features symmetrical top and bottom plates, where you can be built as a pusher or puller quad. You'll love how light and easy to assemble this kit is, at only 240.5g with a Naked GoPro, Vista, and a 450mah 4S pack, or 208g with an Air unit O3 and no GoPro! A solid frame for those looking to create a 2.5" Cinewhoop! This version comes with black ducts and blue tpu.
Check out our selection of micro frames as well as our Luma Quads Products!
Features
Symmetrically designed to be built in either Standard or Pusher configurations.
O3 Air Unit, Mini, Micro and Nano FPV camera options included.
HD Vista/Air Unit 03 / Analog compatible.
Slammed 15mm stack height.
Sub 250g AUW (inc Naked GP and 4S 450mah).
Support for 2.5" propellers.
Front Standard GoPro mount (suits any GoPro style camera mount)
Download the 3D model .stl files for this kit here.
Kit includes DJI Air Unit O3 Mounts
Specifications
Stack Mounting: 20x20mm and 25.5x25.5mm
Rear Mounting: 20x20mm and 25.5x25.5mm
Motor Mount Pattern: 9x9mm
Top Plate Thickness: 2mm
Bottom Plate Thickness: 2mm
Motor to Motor: 129mm
Frame Weight: 62g
Includes
1x Luma Quads Luma 25 Cinewhoop 2.5" Micro Frame Kit
LUMA 25 FRAME ASSEMBLY GUIDE. V1.0
Kit contents:
HARDWARE BAG BREAKDOWN:
Bag A - MAIN
Quantity
M2 8mm Bolt
4x
M2 15mm Standoff
4x
Bag B - STACK
M2 14mm Bolt
4x
M2 Plastic Nut
4x
Bag C - REAR STACK
M2 20mm Bolt
4x
M2 Steel Nut
4x
Bag D - MOTORS
M2 6mm
16x
Bag E - HD MOUNT
M2 8mm Bolt
5x
M2 Steel Nut
5x
M2 Steel Washer
5x
M3 16mm Bolt
1x
M3 Steel Nut
1x
M3 Steel Washer
4x
CARBON PARTS.
2mm Top-plate
1x
2.5mm Bottom-plate
1x
3D PRINTED PARTS.
Front FPV Camera mounts
2x
Front GoPro Hard-mount
1x
Rear Immortal T & Vista Antenna Mount
1x
25.5x25.5 Stack RX Mount
1x
Rear 20x20 Analog RX/VTX Mount
Plastic Parts.
2.5" Prop Guards
5x
Extras.
Zipties
4x
130mm x 12mm Battery strap.
1x
Assembly guide.
The Luma 25 is designed to be built in either Standard or Pusher configuration.
The following guide is for Standard configuration, if you want to build the Luma 25 as a Pusher the two carbon plates as well as the guards need to be flipped upside down and you attach the HD mount to the Bottom plate and the standoffs to the Top plate instead.
1) HD Mount
Insert 1x M3 Steel washer into the GPLite mount as shown.
Insert 2x Washers into the HD Cam Mount.
Align GPLite mount up with HD Mount, Insert M3 Nut into HD Mount.
Insert M3 16mm Bolt through M3 washer into HD Mount and secure with M3 nut.
Insert 4x M2 8mm Bolts through 4x M2 Washers.
Insert M2 Bolts and Washers through HD Cam Mount.
Install HD mount assembly onto Top Plate.
Secure HD Mount to Top plate using 4x M2 Steel nuts.
2) Main Frame.
Insert 4x 14mm M2 standoffs into TPU Front camera and Rear antenna mount.
Align with bottom plate.
Insert 8x 8mm Bolts through the Top and Bottom plates into the standoffs.
3) Prop Guards
Align and orientate the prop guards as shown.
Secure using the included 6mm Motor screws through the bottom plate through the guard into the base of the motor.
4) Rear AntennaSecure the Immortal T antenna Into the rear mount using zipties.
5) Other
The included 25.5x25,5mm or 20x20mm RX mounts can be used either on top of main stack to secure an RX if using Vista or in the rear 20x20mm stack mount position for rear mounted Analog VTX/RX.
IMPORTANT:Do not let electrical components come in contact with the carbon, use spacers that came with your with FC stack and the included RX/VTX Mounts to space your components away from carbon.
The Luma 30 is an ultra-lightweight and super high-performance 3" cinewhoop that can be powered by the same 6S setup as its predecessor, the Luma 3, while still being able to carry a full-size GoPro. It has the same symmetrical bolt patterns on its top and bottom plates that allow it to be built in "puller" or "pusher" configurations, plus a 15mm slammed deck height for a low center of gravity and room for O3 Air Unit, Vista or analog VTX. Weighing just 85g (Frame hardware and prints) and 238g when fully built (without Gopro), it offers longer flight times and improved maneuverability over other 3" whoops. The only drawback is the durability of the injection-molded guards, which will break if you hit anything hard. To make sure customers are satisfied, they have included five guards in each kit. This version comes with black ducts and blue tpu.
Check out our selection of 3" Frame Kits as well as our Luma Quads Products!
Features
HD Vista / analog compatible.
Slammed 15mm stack height.
Both Mini, Micro, and Nano FPV camera mounts are included - supporting all FPV cameras from 20-14mm.
Support for all 3" propellers.
Front Standard GoPro mount (suits any GoPro mounting style camera)
Symmetrically designed to be built in either "Puller" or "Pusher" configurations.
Both SMA and Vista/ Airunit 03 Rear mount with VTX antenna and Immortal T Style Antenna Mount included.
Download the 3d model .stl files for this kit here.
Come on, can any other 3" Cinewhoop do moves like this?
The Ideal setup
Specifications
Stack Mounting: 20x20mm and 25.5x25.5mm
Rear Mounting: 20x20mm
Motor Mount Pattern: 12x12mm M2 & 16x16mm M3
Top Plate Thickness: 2mm
Bottom Plate Thickness: 2.5mm
Motor to Motor: 157.5mm
Frame Weight: 85g (238g built with no battery or HD cam)
Includes
1x Luma Quads Luma 30 Cinewhoop 3" Micro Frame Kit - Black
LUMA 30 FRAME ASSEMBLY GUIDE. V1.0
Kit contents:
HARDWARE BAG BREAKDOWN:
Bag A - MAIN
Quantity
M2 8mm Bolt
12x
M2 15mm Standoff
6x
Bag B - STACK
M2 14mm Bolt
4x
M2 Plastic Nut
4x
Bag C - REAR STACK
M2 18mm Bolt
4x
M2 Steel Nut
4x
Bag D - MOTORS
M2 10mm Bolt
16x
M2 Washer
16x
Bag E - HD MOUNT
M2 8mm Bolt
2x
M2 10mm Bolt
2x
M2 Steel Nut
4x
M2 Steel Washer
4x
M5 Steel Nut
1x
CARBON PARTS.
2mm Top-plate
1x
2.5mm Bottom-plate
1x
3D PRINTED PARTS.
Front FPV Camera mounts
2x
Front GoPro Hard-mount
1x
Rear Immortal T & Vista Antenna Mount
1x
Rear Immortal T & SMA Antenna Mount
1x
25.5x25.5 Stack RX Mount
1x
Rear 20x20 Analog RX/VTX Mount
1x
Plastic Parts.
3" Prop Guards
6x
Extras.
Zipties
4x
Luma 250mm Lipo Strap.
2x
Assembly guide.
The Luma 30 is designed to be built in either Standard or Pusher configuration.
The following guide is for Standard configuration, if you want to build the Luma 30 as a Pusher the two carbon plates as well as the guards need to be flipped upside down and you attach the HD mount to the Bottom plate and the standoffs to the Top plate instead.
1) HD Mount
Insert 1x M5 Steel Nut into the GP mount as shown.
Secure the Gopro mount to the top plate using 2x 8mm M2 bolts washers and steel nuts through the front 2 holes of the mount.
2) Main Frame.
Install 6x 15mm Standoff onto bottom plate.
Secure with 6x 8mm M2 bolts from below.
Insert front FPV camera mounts over front 2 standoffs.
Insert Rear antenna mount over rear 2 standoffs.
Align top plate over the standoffs
Secure with 4x 8mm M2 bolts
Insert 2 more 8mm bolts with M2 washers through the back 2 holes on the GoPro mount into the middle two standoffs.
3) Prop Guards and bumpers
Align and orientate the prop guards as shown.
Secure the guards and bumpers using 16x 10mm M2 bolts and M2 washers.
These are screwed through the bumpers, carbon plate and guards into the base of the motors.
NOTE: M2 BOLTS HAVE SKINNY CAPHEADSDO NOT FORGET TO INSTALL THE WASHERS!DEPENDING ON WHAT MOTORS YOU RUN IT MAY BE NESSASARY TO EXPAND THE CENTER HOLE IN THE GUARDSBY A FRACTION OF A MM TO ALLOW THE BASE SCREW TO SPIN FREELY.
BE SURE NOT TO LET THE MOTOR BOLTS TOUCH THE WINDINGS OF THE MOTORS
4) Rear AntennaSecure the Immortal T antenna Into the rear mount using zipties.
5) Other
The included 25.5x25.5mm or 20x20mm RX mounts can be used either on top of main stack to secure an RX if using Vista or in the rear 20x20mm stack mount position for rear mounted Analog VTX/RX.
IMPORTANT:Do not let electrical components come in contact with the carbon, use spacers that came with your with FC stack and the included RX/VTX Mounts to space your components away from carbon.
Take your drone filming to the next level with the Luma 55 freestyle frame kit. Offering superior performance and durability, it allows you to push the boundaries of traditional quadcopters and capture stunning visuals like never before. 5.5" provides extra thrust and performance beyond what a standard 5" can offer, to accommodate the heavier GoPro cameras we now love and use. The Luma 55 strikes a perfect balance between the agility of a 5-inch freestyle drone and the planted feel of a 6-inch cinematic cruiser, creating a harmonious blend of speed and stability perfect for cinematic work. With the Luma 55, you can effortlessly track and follow fast-moving subjects such as drift cars, boats, and motorbikes, capturing stunning footage with precision and ease.
Be sure to check out all our 5" frames, as well as our Luma Quads Products!
Features
Support for up to 5.5" props
HD VISTA / Analog / DJI O3 Air Unit Compatible
Replaceable 6x8mm arms. (single design)
Vibration dampened main stack mounting
The mounting support for the new Air Unit 03 Camera as well as other MINI to Nano sized FPV cameras
T300 carbon frame
YFS 12.9 grade steal hardware bolts
Complete set of 3D prints for your quad
Specifications
Stack Mounting: 20x20mm
Rear Mounting: 20x20mm and 25.5x25.5mm
Motor Mount Pattern: 16x16 and 19x19mm (M3)
Mid Plate Thickness: 2mm
Top and Bottom Plate Thickness: 2.5mm
Motor to Motor: 245.7mm
Arm Thickness: 6mm
Frame Weight With TPU: 160g
Includes
1x Luma Quads Luma 55 5.5" Freestyle Frame Kit
1x Hardware set
1x 3D Print Set
2x Luma Lipo Straps
Luma 55 Official 4.4 Betaflight PID Tune
Team Luma is proud to bring all Luma 55 pilots a new Betaflight tune for 4.4!
Along with the improvements to GPS rescue and HD integration, 4.4 has had a complete overhaul of the PID controller, which means that a new tune was required to allow for optimum performance. Much like the previous tune for Betaflight 4.2, this revised tune was completed in collaboration with none other than Team Luma pilot Joseph Webb (otherwise known as JWebb FPV), and has been pushed to its absolute limits. Joseph is a true legend in the Australian drone industry. Known for his incredible freestyle piloting skills and unmatched expertise in Betaflight tune development, he is a valuable contributor to our mission of creating the most outstanding products for our entire community.Check out Joseph here: https://www.instagram.com/jwebb.fpv/ and his YT Channel here: https://www.youtube.com/@JWebbFPV and show him some love!
Notes:
- This tune was deveolped using 2306.5 Size motors.- To allow for optimum performance, we recommend installing a 1000μF 35V Low ESR capacitor, along with a TVS diode.
- Be sure to use the latest BF Configurator (we're using 10.9.0)
- Ensure that you cross-reference the values after the CLI dump with the screenshots below (better safe than sorry!)
- Filters were left untouched to ensure that the tune had proper continuity between builds. If you are looking to extract more performance, or attempting to rectify an issue, add more or less filtering via the sliders as required.
- Make sure that you test hover the Luma 55 in a safe area, and check motor temperatures after 20-30 seconds. If they are hot to the touch, then do NOT proceed - ensure the build is up to scratch, and if the issue persists, get in contact and we'll do our best to point you in the right direction
Thank you for your continued support.
DISCLAIMER: LumaQuad does not hold responsibility or liability for any mechanical damage to your personal setup - this tune has been tested and verified on multiple setups to ensure that it is safe for customers.
4.4 Tune (Official v1.0)
CLI Input.
set dterm_lpf1_dyn_min_hz = 0set dterm_lpf1_dyn_max_hz = 0set dterm_lpf1_dyn_expo = 0set dterm_lpf1_type = PT1set dterm_lpf1_static_hz = 75set dterm_lpf2_type = PT1set dterm_lpf2_static_hz = 150set dterm_notch_hz = 0set dterm_notch_cutoff = 0set vbat_sag_compensation = 0set pid_at_min_throttle = ONset anti_gravity_gain = 65set anti_gravity_cutoff_hz = 5set anti_gravity_p_gain = 100set acc_limit_yaw = 0set acc_limit = 0set crash_dthreshold = 50set crash_gthreshold = 400set crash_setpoint_threshold = 350set crash_time = 500set crash_delay = 0set crash_recovery_angle = 10set crash_recovery_rate = 100set crash_limit_yaw = 200set crash_recovery = OFFset iterm_rotation = OFFset iterm_relax = RPset iterm_relax_type = SETPOINTset iterm_relax_cutoff = 14set iterm_windup = 85set iterm_limit = 400set pidsum_limit = 500set pidsum_limit_yaw = 400set yaw_lowpass_hz = 100set throttle_boost = 5set throttle_boost_cutoff = 15set p_pitch = 50set i_pitch = 55set d_pitch = 33set f_pitch = 115set p_roll = 48set i_roll = 60set d_roll = 30set f_roll = 120set p_yaw = 47set i_yaw = 60set d_yaw = 0set f_yaw = 100set angle_level_strength = 50set horizon_level_strength = 50set horizon_transition = 75set level_limit = 55set horizon_tilt_effect = 75set horizon_tilt_expert_mode = OFFset abs_control_gain = 0set abs_control_limit = 90set abs_control_error_limit = 20set abs_control_cutoff = 11set use_integrated_yaw = OFFset integrated_yaw_relax = 200set d_min_roll = 23set d_min_pitch = 27set d_min_yaw = 0set d_max_gain = 37set d_max_advance = 20set motor_output_limit = 90set auto_profile_cell_count = 0set launch_control_mode = NORMALset launch_trigger_allow_reset = ONset launch_trigger_throttle_percent = 20set launch_angle_limit = 0set launch_control_gain = 40set thrust_linear = 0set transient_throttle_limit = 0set feedforward_transition = 0set feedforward_averaging = OFFset feedforward_smooth_factor = 25set feedforward_jitter_factor = 7set feedforward_boost = 15set feedforward_max_rate_limit = 90set dyn_idle_min_rpm = 0set dyn_idle_p_gain = 50set dyn_idle_i_gain = 50set dyn_idle_d_gain = 50set dyn_idle_max_increase = 150set level_race_mode = OFFset simplified_pids_mode = OFFset simplified_master_multiplier = 100set simplified_i_gain = 75set simplified_d_gain = 110set simplified_pi_gain = 115set simplified_dmax_gain = 0set simplified_feedforward_gain = 90set simplified_pitch_d_gain = 100set simplified_pitch_pi_gain = 110set simplified_dterm_filter = ONset simplified_dterm_filter_multiplier = 100set tpa_mode = PDset tpa_rate = 30set tpa_breakpoint = 1350
Legacy 4.29 Tune (v1.0)
CLI Input.
# profile 0set dyn_lpf_dterm_min_hz = 80set dyn_lpf_dterm_max_hz = 200set dyn_lpf_dterm_curve_expo = 8set dterm_lowpass2_hz = 250set anti_gravity_gain = 6500set feedforward_transition = 38set iterm_relax_cutoff = 13set p_pitch = 68set i_pitch = 102set f_pitch = 80set p_roll = 65set i_roll = 100set d_roll = 37set f_roll = 80set p_yaw = 50set i_yaw = 80set f_yaw = 80set d_min_roll = 0set d_min_pitch = 0
LUMA 55 FRAME ASSEMBLY GUIDE
Kit contents:
Hardware:
Carbon:
4x
28mm Aluminum standoff.
1x
2.5mm Top-plate.
2x
20mm Aluminum standoff.
1x
2mm Mid-plate.
9x
Steel M3 12mm. (12.9 grade)
1x
2.5mm Bottom-plate.
5x
Steel M3 8mm. (12.9 grade)
4x
6x8mm Arms.
9x
Steel M3 10mm. (12.9 grade)
7x
M3 Steel Washer.
9x
M3 Steel Pressnut.
Extras:
5x
M3 Silicone soft-mount gummies.
1x
3mm Foam Battery Pad
1x
M5 Steel Clinch Nut.
2x
Luma 250mm Lipo Straps.
1x
M5 20mm Flathead Bolt.
5x
M3 Steel 20mm. (12.9 grade)
5x
M2 Steel 20mm. (12.9 grade)
5x
M2 Steel Nut
TPU parts:
1x
Front bumper.
4x
Arm Bumpers.
4x
Arm Wire Protectors.
4x
Mini to Nano FPV camera mounts.
1x
Front GoPro Hard mount.
1x
Rear Vista antenna and T mount
1x
Rear SMA antenna and T mount
1x
20x20 M3 stack RX mount.
1x
20x20 M2 stack RX mount.
LUMA 55 BUILD GUIDE v1.0
This is the Mid plate.Note the notch at the top of the image, this indicates the back of the frame.
This is the Bottom plate.It has no notch and the flat end at the bottom indicates the front of the frame.
Install 8x Press nuts into the 8x holes in the Mid plate as follows.
Check out the following Video from Phaser FPV For the correct way to install Press nuts into the carbon Mid plate..
DO NOT USE A HAMMER!
Install The Main stack Gummies:
Check out the following video for the correct way to install Gummies into the carbon Mid plate using Dental floss or Fishing wire.
The video shows installation into an FC/ESC.. this technique is the same for carbon.
Insert 8x 12mm M3 Cap head bolts through the Bottom plate.
Note: A single design is used for all 4 arms.
Orientate them so the rounded corners go on the top and bottom and the sharper corners are on the sides.
Attach each arm to the Bottom plate over the 12mm bolts.
Place the Mid plate loosely on top.
Flip the frame over and pick up any bolts you dropped ;)
Screw each 12 MM bolt in a single turn at a time using Loctite Blue 242 Threadlocker.
Work your way around multiple times until the whole thing comes together evenly.
Once everything's locked in nice and square you can go around and give it a final tighten.
Take 4x 10mm Bolts 2x M3 washers and the Front Bumper print.
Install washers on the front two bolts and insert through the Bumper into the bottom of the Bottom plate.
Secure with 4x 28mm Standoffs.
Insert your FPV camera mounts over the front 2 standoffs.
Grab 2x 8mm Bolts and do the same for the rear 2 holes, using 2x 20mm standoffs to secure.
Insert the rear antenna mount over the rear standoffs.
Insert 4x 20mm M3 bolts through the main stack gummies, twist gently and slowly so you don't pop the gummies out.
Use stack spacer prints if required to add some clearance so your ESC sits clear of the press nuts and carbon.
Install the Top-plate, triangle pointing to the front.
Grab 4x 10mm M3 bolts, 4x M3 Washers and the HD Mount Print.
Insert the 4 bolts through the 4 washers into the top of the mount and secure to the 4 28mm Standoffs.
Use 2x 8mm M3 bolts for the rear two holes.
Line up the Lipo pad with the triangle and stick it to the Top plate
Insert the M5 Clinch nut into the HD mount print.
Note: The nut will seat inside the lip of the print and not fall out if you seat it properly, use a little force to get it past the lip.
Arm bumpers go on the end of the arms.
The Printed Arm wire guards go over the motor wires and are secured with electrical tape.
Two of Lumenier's most popular antennas can now be found sharing the same box! We figured we would save you a few clicks (and a few dollars) by making the perfect diversity combo. The renowned AXII 2 antenna gives a clear and even signal in near-perfect circularity, while the newly released AXII Patch Antenna will give you incredible range and penetration where it is pointed. A perfect upgrade for your goggles or ground station. By purchasing this bundle, you will be saving money compared to buying the antennas separately.
This combo also comes with two SMA adapters (90 and 45 degrees) to make installation a breeze.
Check out all our FPV receiver antennas and modules, as well as our Lumenier product selection!
AXII 2
The Lumenier AXII is known to be the most versatile and highest-performing antenna line for FPV today. Lumenier has been able to improve on the best and make it even better!
Improved Features
Significantly Improved Range with a Higher Gain (2.2dBic Gain)
Wider Bandwidth (5.3-6.2GHz)
Cleaner Signal And Better Rejection to Interference
More Durable - Improved Injection Molded Housing
Virtually Perfect Axial Ratio
While almost every aspect of the AXII 2 was improved upon, the size and weight managed to stay the same. The AXII 2 is still one of the smallest and lightest circular polarized antennas on the market, perfect for both lightweight racing builds or freestyle quads.
The AXII 2 comes in many connector types such as SMA, MMCX, U.FL, Stubby SMA, and Long SMA. Precision engineering has given this antenna a virtually perfect 1.0 Axial ratio resulting in a true circularity. On top of that, the AXII 2 has an amazing max gain of 2.2dBic, a true upgrade over the original AXII.
Super Tough
Antennas take a lot of abuse, especially when put onto a quad. The AXII 2's robust antenna housing is made out of a newly injected molded polycarbonate, and ultra-sonically welded shut. This has significantly improved the durability of the AXII housing. The 45mm long semi-rigid RG402 cable allows for 90 degrees or more of freedom. The SMA connection is reinforced with a metal collar crimped to the base for extra support.
Note: When installing, secure the antenna via the SMA connector, do not twist the cap.
Specifications
Gain: 2.2dbic
Axial ratio: 1.0 (near perfect)
Bandwidth: 5.3GHz-6.2GHz
Radiation Efficiency: 98%
SWR: <=1.5:1
Weight: 7.8g
Size: 73mm x 17.5mm
Cable: Semi-rigid RG402
Connector: SMA
Works great as both a transmitting or receiving antenna
Compatible with other styles of 5.8GHz RHCP antennas
Polarization
Right Hand Circular (RHCP)
The AXII Patch
The Lumenier AXII 5.8GHz Patch Antenna offers you the highest performance you can get from a mini patch antenna designed for FPV. The Lumenier AXII Patch has an industry-leading 8.4 dBiC gain for long-range flying and excellent penetration through objects compared to standard omnidirectional FPV antennas. It also features a best-in-class 95% efficiency (most mini patch antennas are below 75%), which means you get amazing performance and the best picture in your video goggles. Lumenier, designed in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the Lumenier AXII 5.8GHz Patch Antenna.
The Lumenier AXII Patch Antenna features an ultra-thin active element suspended above the reflector, which allows for a higher velocity factor and lowers losses. This technology along with precision manufacturing results in a top-of-the-line receiving antenna. It works great on both video goggles or ground stations for 5.8GHz, and is capable of receiving signals up to many miles away.
Features
Circularly Polarized
High 8.4 dBiC
Incredible 95% efficient
Wide 76 degree beam width
Compact low profile design on your goggles
Designed for goggles or base stations
Specifications
Frequency: 5.8GHz
Bandwidth: 220 Mhz
Gain: 8.4 dBiC
Beam Width: 76°
Polarization: RHCP
SMA Connector (Fits Fat shark Goggles and others using SMA)
Dimensions: 35mm x 35mm x 9mm (20mm with SMA)
Weight: 10grams
Includes
1 x Lumenier AXII 2 Antenna
1 x Lumenier AXII Patch Antenna
1 x 90 Degree SMA Adapter
1 x 45 Degree SMA Adapter
