Flywoo 1G2-1G3 VRX boasts a wide 9CH range from 1080-1360MHz and two Y-shaped 1.2G antennas for stable signal connectivity. Alongside, the included Notch Filter (868/915 MHz) which filters out other similar frequencies for clear FPV visuals. Compatible with DJI V2 goggles, allowing for a high-quality video feed and an immersive flying experience.
Check out our FPV Wing Gear, as well as the rest of our Flywoo selection!
Features
Wide Receiving Frequency Range: The FLYWOO1.2/1.3GHz Dual VRX Video Receiver has a receiving frequency range of 9CH, covering a wide range from 1080MHz to 1360MHz.
Dual Antenna Design: With two Y-shaped 1.2G antennas, the Flywoo receiver module ensures stable and reliable signal reception for an uninterrupted FPV experience.
Notch Filter Included: The FLYWOO 1.2GHz VRX Notch Filter (868/915 MHz) included in the box helps eliminate interference from other devices operating at similar frequencies, ensuring a clear video feed.
Compatible with DJI V2 goggles: The FLYWOO 1.2/1.3GHz Dual VRX Video Receiver is compatible with DJI V2 goggles, allowing for a high-quality video feed and an immersive flying experience.
Specifications
Receiving Frequency: 9CH (1080MHz to 1360MHz)
RX Sensitivity: -95dBm
Dual Input: 7-26V/2-6S
Button Control: Lock and Select Frequency
Channel LED: 9CH LED
RSSI LEDs: RSSI0/RSSI1
Regulator Output: 5V 2A
Current Consumption: 0.4A @5V/0.2A @12V
Video Format: NTSC or PAL
Video Output Impedance: 75Ω, Typ.
Audio Subcarrier Frequency: 6.5MHz & 6.0MHz
ANT. Input Impedance: 50Ω, Typ.
RF Connector: SMA
Product User Guide
Press and hold the LOCK button for 3 seconds to unlock the channel. The UNLOCK LED will light up and the buzzer will sound once.
Press the CHANNEL button to select the frequency. The LED will light up and the buzzer will sound once.
The RSSI0/RSSI1 LEDs respectively display the signal strength of the two receiver modules.
The new frequency will be saved if no button action is taken within 3 seconds.
Includes
1x Flywoo VRX 1G2-1G3 Dual 9CH 1.2/1.3GHz Analog Goggle Receiver Module (Compatible with DJI Goggles V2)
2x Flywoo 1.2GHz VRX Notch Filter (868/915 MHz)
2x Flywoo 1.2GHz Antennas
1x Power Cable
1x Video Cable
Foxeer enters the realm of digital starlight cameras with their new Apollo! This new camera is sure to impress and also comes in a standard lens option.
Check out all our DJI compatible gear and our Foxeer product selection!
Specifications
Sensor: Sony 1/2" CMOS
Video out: Digital Mipi
Menu: No
Aspect Ratio: 16:9
Resolution: Digital 720P/60fps
FOV: Standard 160°, Starlight 170°
Minimum Illumination 0.00001Lux
White Balance Auto
S/N Ratio: >65dB(AGC OFF)
WDR: 100dB
Size: 19*19mm
Weight: 9.8g
Includes
1x Foxeer Apollo Micro HD FPV Camera for DJI
The Foxeer Cat 3's large aperture lens excels in low light conditions while also providing optimal footage when exposed to LED's. No more worrying about getting a blown out image when going through a race gate at night.
Looking for the Mini size?
Check out the rest of our FPV cameras, and all our Foxeer products.
Specifications
Sensor Type: Sony 1/3" CMOS Sensor
Scale: 4:3 (Default)/ 16:9 Switchable
Tv System: PAL(Default)/NTSC Switchable
Resolution: 1200TVL
Lens: M12 2.1mm Low Light Lens
FOV: 4:3 FOV-H: 100° FOV-D:125°
16:9 FOV-H: 100° FOV-D:115°
Shutter Speed: PAL 1/25~1/10000 sec; NTSC 1/30~1/10000 sec
Video Output: CVBS Analog Signal
Minimum Illumination: 0.00001Lux
White Balance: Auto
DNR: 3DNR
WDR: 100dB
DAY/NIGHT: EXT/Auto/Color/B&W
Flight OSD: Voltage/Cam Title/Time
Input Voltage: 4.6V~20V
Language: ENGLISH /中文/ PYCCKNN / ESPANOL / ITALIANO /FRANCAIS/POLSKIM/ PORTUGUES / 日本语 / EAAHNIKA
Working Temperature: -10°~50°C RH90% MAX
Working Humidity: 20~80%
Storage Temperature: -20°~70°C
Consumption: 95mA±15% @ DC12V
Dimension: 19x19mm
Weight: 10.7g (Exclude cable)
Includes
1x Foxeer Cat 3 Micro Starlight 1200TVL FPV Camera 4:3/16:9 PAL/NTSC (2.1mm)
The Foxeer Cat 3 Mini is a professional night vision FPV camera. It features a 1200TVL resolution and 0.00001lux night vision, allowing for clear footage even in the dark. This camera is perfect for nighttime flying. As it offers a large aperture night vision lens, this cam is designed to capture clear images and videos even in dark settings. With PAL/NTSC switchable video system, 4:3/16:9 aspect ratio, and 100dB WDR, you get balanced, low noise, and low latency footage. Enjoy your nighttime FPV flights with Foxeer Cat 3 Mini. - Choose between Black and Red for your preference of color!
Check out our selection of mini FPV camera and our ever-growing selection of Foxeer products.
Features
Less Noise
Less Latency
0.00001LUX Super Starlight
Exclusive Optimization for LED
Large Aperture Night Vision
Support OSD & Menu Remote Control with Foxeer FC
Specifications
Sensor Type: Sony 1/3" CMOS Sensor
Scale: 4:3(Default)/16:9 Switchable
Tv System: PAL(Default)/NTSC Switchable
Resolution: 1200TVL
Lens: M12 2.1mm Low Light Lens
FOV 4:3: FOV-H: 100° FOV-D:125°
FOV 16:9: 100° FOV-D:115°
Shutter Speed: PAL 1/25~1/10000 sec; NTSC 1/30~1/10000 sec
Flip: Up, Down, Left and Right
Video Output: CVBS Analog Signal
Latency: Low to 2ms
Minimum Illumination: 0.00001Lux
White Balance: Auto
DNR: 3DNR
WDR: 100dB
DAY/NIGHT: EXT/Auto/Color/B&W
Flight OSD: Voltage/Cam Title/Time
Input Voltage: 4.6V~20V
Power Consumption: 115mA±15%@DC12V,270mA±15%@DC5V
Language: ENGLISH /中文/ PYCCKNN / ESPANOL / ITALIANO /FRANCAIS/POLSKIM/ PORTUGUES / 日本语 / EAAHNIKA
Working Temperature: -10°~50°C RH90% MAX
Working Humidity: 20~80%
Storage Temperature: -20°~70°C
Consumption: 95mA±15% @ DC12V
Dimension: 22 x 22mm; 28 x 22mm(with bracket)
Weight: 12.2g(Exclude cable)
User Manual
Manual
Includes
1x Foxeer Cat 3 Mini 1200TVL CMOS 2MP 4:3/16:9 PAL/NTSC LUX Night FPV Camera (2.1mm) - Choose Your Color
1x OSD Board
1x 2pin OSD Cable
12x Screws
6x Gasket Ring
1x Servo Cable
Foxeer has come out with a brand new motor for 2022, the Datura! In their effort to perfect every aspect of FPV flying, they have decided to focus on the motors this time with great results! Try them for yourself and feel the power of Datura.
Make sure to check out the rest of our motors as well as our entire Foxeer line-up!
Specifications
Kv: 3850
Input Voltage: 3-4S
Configuration: 9N12P
Internal Resistance: 240Ω
ldle Current@10V: 0.6A
Motor Dimensions: 19.2x16.9mm
Stator Dimensions: 14x4mm
Shaft Diameter: 1.5mm
Mounting Pattern: 9x9mm
Weight (w/ wires): 9g
Includes
1x Foxeer Datura 1404 3850Kv Micro Motor
Foxeer has come out with a brand new motor for 2022, the Foxeer Datura 2306.5 2550Kv Motor! In their effort to perfect every aspect of FPV flying, they have decided to focus on the motors this time with great results! Try them for yourself and feel the power of Datura.
Make sure to check out the rest of our motors as well as our entire Foxeer line-up!
Specifications
Kv: 2550
Input Voltage: 3-4S
Configuration: 12N14P
Internal Resistance: 30Ω
ldle Current@10V: 1.9A
Motor Dimensions: 28.9x30.2mm
Stator Dimensions: 23X6.5mm
Shaft Diameter: 5mm
Mounting Pattern: 16x16mm
Weight (w/ wires): 32g
Includes
1x Foxeer Datura 2306.5 2550Kv Motor
Introducing Foxeer's entry into the FPV motor scene. The Datura line of motors feature ultra-light semi-hollow titanium shaft, rubber dampener ring for shock absorption, high quality N52H magnets, and Military grade 260 Degree Celsius radiation resistant high temperature windings.
Make sure to check out the rest of our motors as well as our entire Foxeer line-up!
Specifications
KV: 1750KV
Configuration: 12N14P
Internal Resistance: 50mΩ
ldle Current@10V: 1.65A
Max Power (W): 1315W
Max Current: 59.8A
Motor Dimensions: 34.3x18.8mm
Stator Dimensions: 28x6.5mm
Shaft Thread: M5
Shaft: 4mm Titanium hollow shaft
No. of Cells(Lipo): 4-6S
Bolt Pattern: M3(16x16mm)
Rotor: N52H arc magnets
Weight: 46g with 3cm SR wires
Includes
1x Foxeer Datura 2806.5 1750Kv Motor
The Foxeer ELRS 915/868MHz Receiver Antenna offers superior performance, with stronger signal strength than most other antennas. With a wide range of reception, it ensures reliable, high-quality data transmission. This antenna is a great choice for any FPV setup for maximum range.
Check out our RC Antennas as well as the rest of our Foxeer Collection!
Specifications
Coaxial Cable Length: 155mm or 85mm
Antenna Width: 153mm
Connector: IPEX 1 / U.FL
Includes
1x Foxeer ELRS 915/868MHz Reicerver Antenna - Choose Length
The Foxeer GPS M10Q-180 offers the most precise and efficient positioning system for FPV racing drones. Boasting high-sensitivity accuracy, this 10th Gen GPS & Compass ensures a reliable and enjoyable flight experience. Get where you're going, worry-free! This GPS & Compass is designed for FPV racing drones, providing you with a reliable positioning system for an enjoyable, stress-free experience.
Check out our other GPS options, as well as the rest of our Foxeer Collection!
Features
U-Blox M10050
GPS+GLONASS+BDS
QMC5883 Compass
Dual Protocol
2D ACC 1.5m Precise Positioning
Specifications:
Chip: M10(10th Generation Chip)
Frequency: GPS L1GLONASS L1BDS B1GALILEO ESBAS L1QZSS L1
Input Voltage: 5V
Antenna: Ceramic Antenna
Channel: 72
Battery: Built-in
Compass: QMC5883
Baud Rate: 115200bps
Protocol: Dual NMEA/UBLOX
Output Frequency: 1Hz-10Hz,10Hz default
Speed Accuracy: 0.05m/s
Horizontal Positioning Accuracy: 2D ACC1.5m(outdoor)
Receiver Sensitivity: Trace -166dBm; Capture -160dBm
Dynamic Characteristics: Height 50000m; Speed 500m/s; Acceleration 4G
Operating Temperature: -40C-+85C
Storage temperature: -40C-+105C
Weight: 7.5g
Size: 18 x 18 x 8mm
Includes
Foxeer GPS M10Q-250 GPS & Compass (10th Gen)
This Foxeer HDZero HD 720P digital transmitter is perfect for FPV racing, with 200mw output power and 720p HD video streaming. Race with the top of the line for an immersive, crystal clear experience.
Check out all our VTXs and our entire Foxeer Collection!
Specifications
Frequency 5.8G
Resolution 1280x720@60fps
RF power 25mw/200mw
RF Connector Secured UFL
Interface 4 lane MIPI CSI YUV422
Video Connector 20 Position 0.30mm Pitch
Size 32mm x 34mm x 6mm
Weight 6.3g
Power 410mA@12V
Input Voltage 8~26V(3~6S)
Mounting 20mm x 20mm Φ4 M3
Includes
1x Foxeer HDZero 720P 20x20 25-200mw Digital HD VTX - Race Edition
Foxeer FPV antennas are known for their outstanding performance and price. With these new Lollipop antennas, Foxeer is bringing that same incredible performance with a beautiful new look!
Check out the rest of our VTX Antennas and our selection of Foxeer products!
Features
Smaller, Elegant Curved Design
Durable structure
Ultra Lightweight
Specifications
Center Frequency: 5.75GHz
Gain: 2.6dBi
Axial Ratio: Close to 1
Band Width: 5.5G~6GHz
Radiation Efficiency: 98%
SWR: 1.07 at Center Frequency
Connector: Angled MMCX
Dimension: 11x60mm
Cable Length: 51mm
Polarization: LHCP
Case Material: PC+ABS
Cable: RG178 SFX086
Weight: 4.4 Grams
Includes
2x Foxeer Lollipop V4+ MMCX 90 5.8GHz Antenna - LHCP
Foxeer FPV antennas are known for their outstanding performance and price. With these new Lollipop antennas, Foxeer is bringing that same incredible performance with a beautiful new look!
Check out the rest of our VTX Antennas and our selection of Foxeer products!
Features
Smaller, Elegant Curved Design
Durable structure
Ultra Lightweight
Specifications
Center Frequency: 5.75GHz
Gain: 2.6dBi
Axial Ratio: Close to 1
Band Width: 5.5G~6GHz
Radiation Efficiency: 98%
SWR: 1.07 at Center Frequency
Connector: Angled MMCX
Dimension: 11x60mm
Cable Length: 51mm
Polarization: RHCP
Case Material: PC+ABS
Cable: RG178 SFX086
Weight: 4.4 Grams
Includes
2x Foxeer Lollipop V4+ MMCX 90 5.8GHz Antenna - RHCP
Foxeer FPV antennas are known for their outstanding performance and price. With these new Lollipop antennas, Foxeer is bringing that same incredible performance with a beautiful new look!
Check out the rest of our VTX Antennas and our selection of Foxeer products!
Features
Smaller, Elegant Curved Design
Durable structure
Ultra Lightweight
Specifications
Center Frequency: 5.75GHz
Gain: 2.6dBi
Axial Ratio: Close to 1
Band Width: 5.5G~6GHz
Radiation Efficiency: 98%
SWR: 1.07 at Center Frequency
Connector: RP-SMA
Dimension: 11x60mm
Cable Length: 51mm
Polarization: RHCP
Case Material: PC+ABS
Cable: RG178 SFX086
Weight: 7.8 Grams
Includes
2x Foxeer Lollipop V4+ RP-SMA 5.8GHz Antenna - RHCP
Foxeer FPV antennas are known for their outstanding performance and price. With these new Lollipop antennas, Foxeer is bringing that same incredible performance with a beautiful new look!
Check out the rest of our VTX Antennas and our selection of Foxeer products!
Features
Smaller, Elegant Curved Design
Durable structure
Ultra Lightweight
Specifications
Center Frequency: 5.75GHz
Gain: 2.6dBi
Axial Ratio: Close to 1
Band Width: 5.5G~6GHz
Radiation Efficiency: 98%
SWR: 1.07 at Center Frequency
Connector: SMA
Dimension: 11x60mm
Length: 60mm
Polarization: LHCP
Case Material: PC+ABS
Cable: RG178 SFX086
Weight: 7.8 Grams
Includes
2x Foxeer Lollipop V4+ SMA 5.8GHz Antenna - LHCP
Foxeer FPV antennas are known for their outstanding performance and price. With these new Lollipop antennas, Foxeer is bringing that same incredible performance with a beautiful new look!
Check out the rest of our VTX Antennas and our selection of Foxeer products!
Features
Smaller, Elegant Design
Durable structure
Ultra Lightweight
Specifications
Center Frequency: 5.75GHz
Gain: 2.6dBi
Axial Ratio: Close to 1
Band Width: 5.5G~6GHz
Radiation Efficiency: 98%
SWR: 1.07 at Center Frequency
Connector: Straight MMCX
Dimension: 11x60mm
Cable Length: 51mm
Polarization: LHCP
Case Material: PC+ABS
Cable: RG178 SFX086
Weight: 4.4 Grams
Includes
2x Foxeer Lollipop V4+ Straight MMCX 5.8GHz Antenna - LHCP
Foxeer FPV antennas are known for their outstanding performance and price. With these new Lollipop antennas, Foxeer is bringing that same incredible performance with a beautiful new look!
Check out the rest of our VTX Antennas and our selection of Foxeer products!
Features
Smaller, Elegant Curved Design
Durable structure
Ultra Lightweight
Specifications
Center Frequency: 5.75GHz
Gain: 2.6dBi
Axial Ratio: Close to 1
Band Width: 5.5~6.0GHz
Radiation Efficiency: 98%
SWR: 1.07 at Center Frequency
Connector: U.FL
Dimension: 11x60mm
Cable Length: 85mm
Polarization: LHCP
Case Material: PC+ABS
Cable: RG178 SFX086
Weight: 2.8 Grams
Includes
2x Foxeer Lollipop V4+ RP-SMA 5.8GHz Antenna - LHCP
Foxeer FPV antennas are known for their outstanding performance and price. With these new Lollipop antennas, Foxeer is bringing that same incredible performance with a beautiful new look!
Check out the rest of our VTX Antennas and our selection of Foxeer products!
Features
Smaller, Elegant Curved Design
Durable structure
Ultra Lightweight
Specifications
Center Frequency: 5.75GHz
Gain: 2.6dBi
Axial Ratio: Close to 1
Band Width: 5.5G~6GHz
Radiation Efficiency: 98%
SWR: 1.07 at Center Frequency
Connector: U.FL
Dimension: 11x60mm
Cable Length: 85mm
Polarization: RHCP
Case Material: PC+ABS
Cable: RG178 SFX086
Weight: 2.8 Grams
Includes
2x Foxeer Lollipop V4+ RP-SMA 5.8GHz Antenna - RHCP
The Foxeer Mega HD O3 3.5" Frame Kit provides a strong, light and robust frame for your drone. The kit includes its own high-quality canopy, battery straps, motor mounts and propeller guards, so you can build a powerful and reliable FPV drone quickly and easily. This frame was designed for maximum performance and durability, so you can enjoy a great FPV experience. The deadcat design makes the perfect frame for HD systems like the O3 Air Unit!
Check out the rest of our 3.5" frames and our entire Foxeer Collection!
Features
High quality Japan Toray T700 carbon fiber
Aluminum alloy 7075 CNC camera cage
O3/Analog/Vista/HDzero/Walksnail Compatible
Specifications
Material: Toray T700 carbon with a silky coating
Wheelbase: 166mm
Prop Size: 3.5"
Stack Mounting: Middle: 25.5mm M2; Rear:20x20mm/25.5x25.5mm M2
System: Analog, Vista, HDZero, Walksnail, fits O3 with included TPU prints
Motor Mounting Pattern: 12x12mm
Camera size: 19x19/20x20mm
Weight: 85g (Including TPU and screws)
Includes
1x Foxeer Mega HD O3 Deadcat 3.5" Frame Kit
1x 2mm Top Plate
1x 2mm Center Plate
1x 2mm Bottom Plate
1x CNC Side Plate
1x M3 x Φ5 x 20 Standoff
1x SMA Antenna Mount
1x Bottom Plate Front Protective Mount
1x M5 Gopro Mount
1x Arm Guard
1x Rx Antenna Mount
1x Isolation Column
1x DJI O3 VTx Mount
1x UFL Antenna Mount
1x Cam Spacer
1x M5 Nut
1x M5x20 Screw
1x Battery Anti-slip
1x 225x15mm Battery Strap
The Foxeer Mega HD O3 Deadcat 4" Frame Kit provides a strong, light and robust frame. The kit includes its own high-quality canopy, battery straps, motor mounts and propeller guards, so you can build a powerful and reliable FPV drone quickly and easily. This frame was designed for maximum performance and durability, so you can enjoy a great FPV experience. The Deadcat design makes the perfect frame for HD systems like the O3 Air Unit!
Check out the rest of our 4" frames and our entire Foxeer Collection!
Features
High quality Japan Toray T700 carbon fiber
Aluminum alloy 7075 CNC camera cage
O3/Analog/Vista/HDzero/Walksnail Compatible
Specifications
Material: Toray T700 carbon with a silky coating
Wheelbase: 192mm
Prop Size: 4"
Stack Mounting: Middle: 25.5mm M2; Rear:20x20mm/25.5x25.5mm M2
System: Analog, Vista, HDZero, Walksnail, fits O3 with included TPU prints
Motor Mounting Pattern: 12x12mm
Camera size: 19x19/20x20mm
Weight: 89g (Including TPU and screws)
Includes
1x Foxeer Mega HD O3 Deadcat 4" Frame Kit
1x 2mm Top Plate
1x 2mm Center Plate
1x 2mm Bottom Plate
1x CNC Side Plate
1x M3 x Φ5 x 20 Standoff
1x SMA Antenna Mount
1x Bottom Plate Front Protective Mount
1x M5 Gopro Mount
1x Arm Guard
1x Rx Antenna Mount
1x Isolation Column
1x DJI O3 VTx Mount
1x UFL Antenna Mount
1x Cam Spacer
1x M5 Nut
1x M5x20 Screw
1x Battery Anti-slip
1x 225x15mm Battery Strap
Foxeer FPV antennas are known for their great performance and price, with these new micro Lollipop antennas they are bringing that same performance to the micro world like Toothpick and Ultralight builds. But that does not mean they still can't be used in bigger rigs!
Check out the rest of our VTX Antennas and our selection of Foxeer products!
Features
Smaller, Lighter but stronger
Durable structure
Available in 3 different colors
Ultra Lightweight
Specifications
Center Frequency: 5.7GHz
Gain: 2.5dBi
Axial Ratio: Close to 1
Band Width: 5.5G~6GHz
Radiation Efficiency: 98%
SWR: 1.06 at Center Frequency
Connector: RP-SMA
Dimension: 11*65mm
Cable Length: 51mm
Polarization: RHCP/LHCP
Case Material: PC+ABS
Cable: RG178 SFX086
Weight: 4.7 Grams
Includes
2x Foxeer Micro Lollipop 5.8GHz RP-SMA Antenna
Foxeer FPV antennas are known for their great performance and price, with these new micro Lollipop antennas they are bringing that same performance to the micro world like Toothpick and Ultralite builds. But that does not mean they still can't be used in bigger rigs!
Check out the rest of our VTX Antennas and our selection of Foxeer products!
Features
Smaller, Lighter but stronger
Durable structure
Available in 4 different colors
Ultra Lightweight
Specifications
Center Frequency: 5.7GHz
Gain: 2.5dBi
Axial Ratio: Close to 1
Band Width: 5.5G~6GHz
Radiation Efficiency: 98%
SWR: 1.06 at Center Frequency
Connector: u.Fl
Dimension: 11*65mm
Cable Length: 51mm
Polarization: RHCP/LHCP
Case Material: PC+ABS
Cable: RG178 SFX086
Weight: 1.6 Grams (u.Fl connector)
Includes
2x Foxeer Micro Lollipop 5.8GHz U.FL Antenna
Keep your antennas further away from the carbon fiber of your frame (or in this case, your head) for cleaner transmission and longer range flying with these 15CM Foxeer Pagoda Pro antennas. The 90 Degree SMA version is an ideal Omni for your FPV goggle Receiver.
Check out our selection of FPV receiver antennas, and all our Foxeer products!
Features
Manufactured and tested to highest standards
Best in class range and signal quality
Double-jacket semi-rigid cable for heavy impact resistance
Low loss RG402 feeder
Easy installation. Can be bent and maintain any angle.
Root reinforcement design 360 ° protection
Omnidirectional gain
Specifications
Frequency Range: 5500-6000mhz
Gain: 2 Dbi
Shell Material: Imported PC + ABS
Antenna Cable: RG402
Antenna Length: 15cm
Connector: 90 SMA
Weight: 15g
Includes
1x Foxeer Pagoda Pro 5.8GHz 15cm 90° SMA Long Range Antenna - RHCP
The Predator 5 Nano Five33 Edition is a 14x14mm or 19x19mm (with bracket) FPV camera by Foxeer and modified by Five33 so that the camera comes Pre HV-Flipped (meaning the camera can be mounted with its connector at the bottom of the camera instead of the topside). This camera features a 1/3" CMOS sensor, 1000TVL resolution, ultra-low 4ms latency, NTSC/PAL switchable, image flip, super WDR function, and many other cool features! Compared to the Predator 4, the Predator 5 has a more natural image. It is optimized for LED glare, so it is perfect for night flying where LED lights are being used. You'll also have the performance you need during the day and in low light conditions, as this camera is 4ms ultra-low latency and a wide dynamic range for superior image quality. Enjoy efficient, reliable performance around the clock.
Check out all our Nano FPV cameras and all our Foxeer gear!
Features
Flight OSD: Voltage/Cam Title/Time/Cross Hair
Minimum Illumination: 0.01Lux
Sony 1/3″ CMOS Sensor
NTSC/PAL Switchable
Stylish Camera Case
Super WDR Function
4:3/16:9 Switchable
Mode Quick Switch
Fast Mode Switch
4ms Latency
HV Flipped
Cross Hair
Image Flip
Specifications
Sensor Type: Sony 1/3" CMOS Sensor
Scale: 4:3(default)/16:9 Switchable
Tv System: NTSC (default)/PAL Switchable
Resolution: 1000TVL
Shutter Speed: PAL 1/25~1/10000 sec; NTSC 1/30~1/10000 sec
Video Output: CVBS Analog Signal
FOV: FOV-H:125° FOV-D: 155°
Shutter Speed: Auto
Minimum Illumination: 0.01Lux
White Balance: Auto
DNR: 3DNR 2DNR
WDR: Super WDR
Mode: DAY/CLOUDY/Night/LED
Fast Mode Switch: Long Press Right Button to switch between
DAY/CLOUDY/Night/LED
Flight OSD: Voltage/Cam Title/Time/Cross Hair
Flip: Supported
Input Voltage: 4.5V~20V
Language: ENGLISH/ DEUTSCH/ FRANCAIS/ PYCCKNN/ PORTUGUES/ ESPANOL/中文
Working Temperature: -10°~50°C RH90% MAX
Working Humidity: 20~80%
Storage Temperature: -20°~70°C
Consumption: 50mA±15% @ DC12V 115mA±15% @ DC5V
Dimension: 14x14mm; 19x19mm(Add Bracket)
Weight: 4.8g (Exclude cable)
Includes
1x Foxeer Predator 5 Nano 1000TVL 4:3/16:9 PAL/NTSC FPV Camera - Five33 Edition
4x Bracket Screws (M2x6)
1x 2pin OSD Cable
4x Screws (M2x4)
4x Bracket Ring
1x Servo Cable
1x Bracket
The Foxeer Razer is an incredible value! The image quality and performance are on par with much more expensive cameras. Check out the test footage below, and in the "Test Videos" tab above!We also carry the Razer Mini 4:3!
Check out all our Mini FPV Cameras, and all our Foxeer products!
Features
1200TVL High Definition Natual Image
Low Latency
Good Low Light Performance
NTSC/PAL Switchable
Wide Input Voltage Range
Supports OSD & Menu Remote Control
Specifications
Sensor Type: CMOS 1/3
Scale: 4:3
TV System: PAL/ NTSC Switchable
Resolution: 1200TVL
FOV: 4:3 FOV-H 125° FOV-D 15W, 16:9 FOV-H 125° FOV-D 145°
Shutter Speed(CCD IRIS): PAL: 1/25-1/10000 sec; NTSC: 1/30-1/10000 sec
Video Out CVBS
Min. Illumination 0.01Lux
Flight OSD: -
White Balance: Auto
DNR: 3DNR
WDR: 90db
Day / Night Shift: EXT/ Auto/ Color/ B&W
Power Requirement: DC 4.5V-25V
Working Temperature: -10°C--,50°C RH 90%
MAX Working Humidity: 20-80%
Storage Temperature: -20°C-+70°C
Storage Humidity" 20-95%
Dimensions(mm) 19.0x18.7mm (W*L)(w/o bracket)
Weight: 4.5g
Includes
1x Razer Micro Cam
1x Servo Cable
1x 2pin OSD Cable
1x OSD Board
1x Manual
1x Screw Set
Test Videos
s
The Foxeer Razer is an incredible value! The image quality and performance are on par with much more expensive cameras. This is the new benchmark for a budget camera. Check out the test footage below, and in the "Test Videos" tab above!We also carry the Razer Micro in 4:3 and Razer Micro in 16:9!
Check out all our Mini FPV Cameras, and all our Foxeer products!
Features
1200TVL High Definition Natual Image
Low Latency
Good Low Light Performance
NTSC/PAL Switchable
Wide Input Voltage Range
Supports OSD & Menu Remote Control
Specifications
Sensor Type: CMOS 1/3
Scale: 4:3
TV System: PAL/ NTSC Switchable
Resolution: 1200TVL
FOV: 4:3 FOV-H 125° FOV-D 15W, 16:9 FOV-H 125° FOV-D 145°
Shutter Speed(CCD IRIS): PAL: 1/25-1/10000 sec; NTSC: 1/30-1/10000 sec
Video Out: CVBS
Min. Illumination: 0.01Lux
Flight OSD: -
White Balance: Auto
DNR: 3DNR
WDR: 90db
Day / Night Shift: EXT/ Auto/ Color/ B&W
Power Requirement: DC 4.5V-25V
Working Temperature: -10°C--,50°C RH 90%
MAX Working Humidity: 20-80%
Storage Temperature: -20°C-+70°C
Storage Humidity: 20-95%
Dimensions: 21.8x21.8mm (W*L)(w/o bracket)
Weight: 12g
Includes
1x Razer Mini Cam
1x Servo Cable
1x 2pin OSD Cable
1x OSD Board
1x Manual
1x Screw Set
Test Videos
The Foxeer Razer is an incredible value! The image quality and performance are on par with much more expensive cameras. This is the new benchmark for a budget camera. Check out the test footage below, and in the "Test Videos" tab above!We also carry the Razer Mini in 4:3, Razer Micro in 4:3 and Razer Micro in 16:9!
Check out all our Mini FPV Cameras, and all our Foxeer products!
Features
1200TVL High Definition Natual Image
Low Latency
Good Low Light Performance
NTSC/PAL Switchable
Wide Input Voltage Range
Supports OSD & Menu Remote Control
Specifications
Sensor Type: CMOS 1/3
Scale: 16:9
TV System: PAL/ NTSC Switchable
Resolution: 1200TVL
FOV: 4:3 FOV-H 125° FOV-D 15W, 16:9 FOV-H 125° FOV-D 145°
Shutter Speed(CCD IRIS): PAL: 1/25-1/10000 sec; NTSC: 1/30-1/10000 sec
Video Out: CVBS
Min. Illumination: 0.01Lux
Flight OSD: -
White Balance: Auto
DNR: 3DNR
WDR: 90db
Day / Night Shift: EXT/ Auto/ Color/ B&W
Power Requirement: DC 4.5V-25V
Working Temperature: -10°C--,50°C RH 90%
MAX Working Humidity: 20-80%
Storage Temperature: -20°C-+70°C
Storage Humidity: 20-95%
Dimensions: 21.8x21.8mm (W*L)(w/o bracket)
Weight: 12g
Includes
1x Razer Mini Cam
1x Servo Cable
1x 2pin OSD Cable
1x OSD Board
1x Manual
1x Screw Set
Test Videos
The wildly popular Razer is now available in a nano form factor! This camera is an incredible value! Also available in nano 4:3, as well as micro and mini sizes.Be sure to check out all our nano FPV cameras and our entire Foxeer selection!
Features
1200TVL High Definition Natural Image
Low Latency
Good Low Light Performance
NTSC/PAL Switchable
Wide Input Voltage Range
Supports OSD & Menu Remote Control
Specifications
Sensor Type: CMOS 1/3
Scale: 16:9
TV System: NTSC
Resolution: 1200TVL
FOV: 4:3: FOV-H 125° / FOV-D 150° ; 16:9: FOV-H 125° / FOV-D 140°
Shutter Speed (CCD IRIS): PAL: 1/25 ~ 1/10000 sec; NTSC: 1/30~10000 sec
Video Out: CVBS
Min. Illimination: 0.01Lux
White Balance: Auto
DNR: 3DNR
WDR: 90db
Day/Night: Color
Power Requirement: DC 4.5V~7V
Working Temperature: -10℃~+50℃ RH90% MAX
Working Humidity: 20~80%
Storage Temperature: -20℃~+70℃
Storage Humidity: 20~95%
Dimension: 14x15mm (W*L)(without bracket)
Weight: 3.9g
Includes
1x Foxeer Razer Nano Camera
1x Servo Cable
1x Screws
The wildly popular Razer is now available in a nano form factor! This camera is an incredible value! Also available in nano 16:9, as well as micro and mini sizes.Be sure to check out all our nano FPV cameras and our entire Foxeer selection!
Features
1200TVL High Definition Natural Image
Low Latency
Good Low Light Performance
NTSC/PAL Switchable
Wide Input Voltage Range
Supports OSD & Menu Remote Control
Specifications
Sensor Type: CMOS 1/3
Scale: 4:3
TV System: NTSC
Resolution: 1200TVL
FOV: 4:3: FOV-H 125° / FOV-D 150° ; 16:9: FOV-H 125° / FOV-D 140°
Shutter Speed (CCD IRIS): PAL: 1/25 ~ 1/10000 sec; NTSC: 1/30~10000 sec
Video Out: CVBS
Min. Illimination: 0.01Lux
White Balance: Auto
DNR: 3DNR
WDR: 90db
Day/Night: Color
Power Requirement: DC 4.5V~7V
Working Temperature: -10℃~+50℃ RH90% MAX
Working Humidity: 20~80%
Storage Temperature: -20℃~+70℃
Storage Humidity: 20~95%
Dimension: 14x15mm (W*L)(without bracket)
Weight: 3.9g
Includes
1x Foxeer Razer Nano Camera
1x Servo Cable
1x Screws
The Foxeer TRex Micro is a 19x19mm FPV camera by Foxeer that features a 2MP CMOS sensor, 1500TVL resolution, 6ms latency, NTSC/PAL switchable, auto white balance, and many other cool features!
Check out our selection of FPV cameras and our ever growing selection of Foxeer products.
Specifications
Sensor Type CMOS 2MP
Scale: 4:3/16:9 Switchable
Tv System: PAL/NTSC Switchable
Resolution: 1500TVL
FOV 4:3: FOV-H: 120° FOV-D:150°
FOV 16:9: FOV-H: 155° FOV-D:175°
Shutter Speed: Auto
Flip: Up, Down, Left and Right
Video Output: CVBS Analog Signal
Latency: Low to 2ms
Minimum Illumination: 0.001Lux
White Balance: Auto
DNR: 3DNR
WDR: 110dB
DAY/NIGHT: EXT/Auto/Color/B&W
Flight OSD: Voltage/Cam Title/Time
Input Voltage: 4.5V~16V
Power Consumption: 115mA±15%@DC12V,270mA±15%@DC5V
Language: ENGLISH /中文
Working Temperature: -10°~50°C RH90% MAX
Working Humidity: 20~80%
Storage Temperature: -20°~70°C
Dimension: 19*19mm
Weight: 8.6g(Exclude cable)
Includes
1x Foxeer T Rex Micro FPV Camera 1500TVL CMOS 16:9/4:3 PAL/NTSC Plug - Choose Your Color
The Foxeer T-Rex Mini 1500TVL CMOS 2MP 4:3/16:9 camera is an exceptional analog camera, offering an outstanding resolution of 1500 TVL and incredibly realistic colors, even in low-light conditions. Thanks to its Super WDR technology, this camera also handles sudden contrast shifts very effectively. Get crisp footage for your FPV with this top-of-the-line camera. 110db WDR, this camera will perform beyond your imagination under complicated conditions including sunny day, cloudy day, indoor, night with well illumination, even scarcely visible twilight.
Check out our selection of mini FPV camera and our ever growing selection of Foxeer products.
Features
New Generation FPV Cam
Resolution Redefined
Exclusive Optimization for LEDs
Specifications
Sensor Type: CMOS 2MP
Scale: 4:3/16:9 Switchable
Tv System: PAL/NTSC Switchable
Resolution: 1500TVL
FOV 4:3: 120° FOV-D:150°
FOV 16:9: 155° FOV-D:175°
Shutter Speed: Auto
Flip: Up, Down, Left and Right
Video Output: CVBS Analog Signal
Latency: Low to 2ms
Minimum Illumination: 0.001Lux
White Balance: Auto
DNR: 3DNR
WDR: 110dB
DAY/NIGHT: EXT/Auto/Color/B&W
Flight OSD: Voltage/Cam Title/Time
Input Voltage: 5V~16V
Power Consumption: 115mA±15%@DC12V,270mA±15%@DC5V
Language: ENGLISH /中文
Working Temperature: -10°~50°C RH90% MAX
Working Humidity: 20~80%
Storage Temperature: -20°~70°C
Dimension: 22 x 22mm; 28 x 22mm(with bracket)
Weight: 10.2g(Exclude cable)
User Manual
Manual
Includes
1x Foxeer T-Rex Mini 1500TVL CMOS 2MP 4:3/16:9 PAL/NTSC FPV Super WDR Camera (1.7mm)
1x OSD Board
1x 2pin OSD Cable
12x Screws
6x Gasket Ring
1x Servo Cable
The Toothless is just got an upgrade! Now featuring a switchable FoV! Available in Nano Standard, Nano Starlight, Micro & Mini/Full!Check out all our micro FPV cameras and all our Foxeer gear!
Features
Switchable Narrow/Wide FoV to suit freestyle quads or fixed wing flight
Huge 1/2" sensor grabs more light for better image quality and low light flying
True all weather, all hours camera. Fly day or night, fog or blazing sunlight
Supports OSD control from your FC or remote control joystick.
Specifications
Horizontal Resolution 1200TVL
Aspect Ratio: 4:3 / 16:9 Switchable
Signal System NTSC/PAL Switchable
Focal Length: M12 1.7mm
Input Voltage 4.6-20V
Dimensions: 19x19mm
Weight: 8.5g
Includes
1x Foxeer Toothless 2 Micro FPV Camera
1x OSD Board
1x Screw Set
1x 2 Pin OSD Cable
1x Servo Cable / TBS Unify VTX Cable (150mm)
1x Manual
The Toothless is just got an upgrade! Now featuring a switchable FoV! This is the Nano with a 2.1mm starlight lens. Slightly more narrow FoV but better low light performance. Available in Nano Standard, Nano Starlight, Micro & Mini/Full!Check out all our Nano FPV cameras and all our Foxeer gear!
Features
Huge 1/2" sensor grabs more light for better image quality and low light flying
True all weather, all hours camera. Fly day or night, fog or blazing sunlight
Supports OSD control from your FC or remote control joystick.
Specifications
Horizontal Resolution 1200TVL
Aspect Ratio: 4:3 / 16:9 Switchable
Signal System NTSC/PAL Switchable
Focal Length: M12 1.7mm
Input Voltage: 3.8-16V
Dimensions: 14x14mm
Weight: 3.1g
Includes
1x Foxeer Toothless 2 Standard Nano FPV Camera
1x OSD Board
1x Screw Set
1x 2 Pin OSD Cable
1x Bracket
1x Manual
The Foxeer Wildfire diversity module provides clean and stable FPV feed even in high multipath environments, as well as avoiding desynced "rolling shutter" issues by switching to traditional diversity function when RSSI is low. Check out the comparison below to see this feature in action.
Be sure to check out all our FPV goggles and Modules and our entire Foxeer selection!
Features
Latest RF technology to improve FPV feed even in multipath environments.
Anti rolling shutter technology avoids unsynced picture by switching to standard diversity under low RSSI conditions.
High performance MCU. Small size and low power consumption.
OLED screen
5-Way Button
5-16V input power range
1504 Cooling Fan
Specifications
Frequency: 5.8G 72CH
RF Sensitivity: -98dBm
Update: Support OSD and Firmware Update
Power Consumption: 5V 400mA±10%
Power Requirement: 5~16V
Weight: 30g
Compatibility: Fatshark series goggles (V1,V2,V3,HD1,HD2,HD3,SE,HDO)
Appearance: OLED screen, 5-way Button, Micro-USB, 1504 Fan (made by Taiwan)
Menu: Channel, Favorites, Finder, Band Scan, Setting
Includes
1x Foxeer Wildfire 5.8GHz Diversity FPV Goggle Receiver Module
FPVCycle has the perfect addition to your little ripper with these fantastic micro motors.
Check out our other FPVCycle motors, and all our FPV Cycle selection!
Specifications
Kv: 11400Kv
Input Voltage: 1S LiPo
Motor Dimensions: Φ17.5mm x 5.7mm
Shaft Diameter: 2mm
Mounting Pattern: Φ9mm
Wire Dimensions: 27AWG x 200mm
Weight (w/ wires): 6g
Includes
1x FPV Cycle 13mm 11400Kv Micro Motor
FPVCycle has the perfect addition to your little ripper with these fantastic micro motors.
Check out our other FPVCycle motors, and all our FPV Cycle selection!
Specifications
Kv: 5000Kv
Input Voltage: 2-3S LiPo
Motor Dimensions: Φ17.5mm x 5.7mm
Shaft Diameter: 2mm
Mounting Pattern: Φ9mm
Wire Dimensions: 27AWG x 200mm
Weight (w/ wires): 6g
Includes
1x FPV Cycle 13mm 5000Kv Micro Motor
FPVCycle has the perfect addition to your little ripper with these fantastic micro motors.
Check out our other motors, and all our FPVCycle selection!
Specifications
Kv: 6350Kv
Input Voltage: 2-4S LiPo
Motor Dimensions: Φ17.3mm x 15.4mm
Shaft Diameter: 2mm
Mounting Pattern: Φ9mm
Wire Dimensions: 28AWG x 200mm
Weight: 6g
Includes
1x FPV Cycle 13mm 6350Kv Motor
The intended use of this motor is specifically for improved performance on sub 250g 5” crafts compared to other current options. The motor size is 2104 which will give you a noticeable control performance improvement over the popular 2004 size while weighing about the same thanks to the new lighter shaft design which is compatible with future M3 mount props and is fully compatible with existing M5 mount props.
Check out our other motors, and all our FPV Cycle selection!
Recommended Uses
5S-6S 5” ~250g AUW
6S 4”
Specifications
Kv: 1620Kv
Input Voltage: 5-6S LiPo
Motor Dimensions: Φ24.7mm x 25mm
Shaft Diameter: 3mm w/ 5mm Adapter
Mounting Pattern: Φ12mm M2
Wire Dimensions: 24AWG x 250mm
Weight: 16g
Includes
1x FPVCycle 21mm 1620Kv Motor - M3 Prop Shaft w/ M5 Adapter
A spare motor stator for any 22.6mm Imperial motor.
This product is meant to pair with FPV Cycle 22.6mm Imperial Spare Motor Bell - Choose Your Color, where you pair with this stator to create your own motor with your user preference for the color of your bell. The gorgeous colors, a 1920Kv build your motor, and a swappable bell with an O-ring for shaft retention makes it easy to replace.
Check out our other motors, and the rest of our FPV Cycle selection!
Specifications
Stator - ~19.6g with ~90mm wire
Delta wound wires
12N14P Configuration
N52H arc magnets with retention lip on bell
0.15mm Nippon Steel silicon steel laminations
20AWG wire, ~20cm length
2.5mm thick mounting base, flush mount
16x16mm M3 mount
Includes
1x FPV Cycle 22.6mm 1920Kv Imperial Spare Motor Stator
A spare motor bell for any 22.6mm Imperial motor that may have fallen to a bando bash or your favorite spot!
This product can be paired with FPV Cycle 22.6mm 1920Kv Imperial Spare Motor Stator, which you pair with these motor bells to create your motor with your user preference for the color of your bell. The gorgeous colors, a 1920Kv build your motor, and a swappable bell with an O-ring for shaft retention makes it easy to replace.
Check out our other motors, and the rest of our FPV Cycle selection!
Specifications
Bell - 14.4g (silver is 14.3g)
Delta wound wires
7075 Aluminum alloy
12N14P Configuration
M5 Prop Shaft
14mm Titanium alloy hollow shaft (8mm thread)
Flanged prop nut (M5x6)
N52H arc magnets with retention lip on bell
20AWG wire, ~20cm length
2.5mm thick mounting base, flush mount
M3x5 button head bell retention screw
Includes
1x FPV Cycle 22.6mm Imperial Spare Motor Bell - Choose Your Color
This motor is the first of its kind in that it’s a full 5” performance size motor with a 12x12 M2 mount platform and M3 Prop shaft. (M5 adapter included) Pair this motor with the Gemfan F3 or F4 prop and a sub 500g AUW 5” frame for a truly stellar level of control performance.
This motor is specifically designed for the following uses:
3” Ducted whoop
4” Anything
5” Light blade and low general AUW for 5”
Tall version w/ M5 shaft also available!
Check out our other motors, and all our FPVCycle selection!
Specifications
Kv: 3450Kv
Input Voltage: 3-5S LiPo
Configuration: 12N14P
Motor Dimensions: Φ26mm x 26mm
Stator Dimensions: Φ23mm
Shaft Diameter: 3mm w/ 5mm Adapter
Mounting Pattern: Φ12mm M2
Wire Dimensions: 22AWG x 250mm
Weight: 29g
Includes
1x FPVCycle 23mm Short 3450Kv Motor - M3 Mount w/ M5 Adapter
This is the first and only FPV motor on the market with split-shifted magnets.
This is the 4th gen of this motor and it's been an expensive development journey. With the latest development of the Split Shift magnet structure, we believe it's as good as it can be. This motor also shares the more recent developments of easy bell swaps, extra thick bell spoke structure and the O-ring shaft tension system.
Take your FPV projects to the next level with the FPV Cycle 25mm 1870Kv Motor. Boasting high efficiency, smooth operation and great performance, this motor is the perfect choice for your next flight.
Check out our other motors, and all our FPVCycle selection!
Specifications
Weight: ~35g with ~20mm wires
KV: 1870
Delta wound winding
Material: 7075 Aluminum alloy
Configuration: 12N14P
M5 Prop Adapter Shaft Thread
13.5mm Titanium Alloy hollow shaft (8mm thread)
Flanged prop nut (M5x6), no washer
Japanese NMB 9x4x4mm Bearing
N52H arc magnets with retention lip on bell
0.15mm Nippon Steel silicon steel laminations
Wire: 20AWG wire, ~20cm length
2.5mm thick mounting base, flush mount
Motor Mounting: 16x16mm M3 mount
M3x8 button head bell retention screw
Includes
1x FPV Cycle 25mm 1870Kv Motor w/ Split-Shifted Magnets.
1x Motor Hardware
This all-new motor has been 100% redesigned from the ground up. Compared to the previous version, the new motor has a larger 10mm bearing, 3.6% more stator volume, and six-spoke bells with thicker metal and other improvements in a number of other areas. The functional result is slightly less amp draw, a bit more power, and better bell and bearing durability. Most importantly, we have not heard a single report of desync or skipping issues across many quads so far.
Check out our other motors, and the rest of our FPV Cycle selection!
Specifications
Kv: 2150Kv
Input Voltage: 4-6S LiPo
Configuration: 12N14P
Motor Dimensions: Φ30.75mm x 31.4mm
Shaft Diameter: 5mm
Mounting Pattern: Φ16mm
Wire Dimensions: 20AWG x 250mm
Weight (w/ wires): 35g
Includes
1x FPV Cycle 25mm Imperial 2150Kv Motor
A spare motor bell for any 25mm Imperial motor that may have fallen to a bando bash or your favorite spot!
Check out our other motors, and the rest of our FPV Cycle selection!
Specifications
Spare Bell
Works with both color options
Includes
1x FPV Cycle 25mm Imperial Spare Motor Bell
The 2809 is a great size because of it's proportion of width to height providing good permanent magnetic flux, adequate stator heat dissipation, good efficiency, good motor weight and excellent low and high rpm control for typical 7-8" loads on 6S with it's 1300kv.
This motor is built with the latest components RCinpower has to offer and parts we've found to perform well. Various adjustments and quality of life improvements include bell durability design, bearing accessibility, flush mounting, magnet heat dissipation and other minor details.
Check out our other motors, and all our FPVCycle selection!
Specifications
Weight: 53g with 20cm 18awg wire
KV: 1300
Configuration: 12N14P
Input Voltage: 6-8S
N52H arc magnets
260℃ enamel copper wire
0.2mm laminations
Titanium Alloy hollow shaft
Japanese NMB 13x6x5mm bearings
Wire: 18AWG 20cm length
Material: 7075 Aluminum
M5 Prop shaft
Motor Mounting: M3 19X19mm flush mount base
Includes
1x FPV Cycle 28mm 1300Kv Motor
Use this frame in 1.5mm or 2mm with the 1S 3” drivetrain for a super fun and safe 45-55g AUW quad that will knock your socks off! The same pattern is offered in 3mm for the 3S drivetrain if you prefer a unibody over the TP3. It’s impressively stiff and confidence-inspiring in 3mm and only 8.8g. You should be aware that the 1.5mm version is not as strong as the 2mm version but it is about 1.3g lighter.This design is called the ‘Baby Tooth’ not because it’s smaller than the TP3, but because it supports 1S better and is simpler than the TP3. After some heavy refinement, this is the final pattern we landed on.This frame is cut from T700 carbon but It does not have a chamfer on it. This frame is supposed to be a high-value item with the majority of the design time invested into optimizing performance, weight, and durability. Customizing the frame with your own hand-done sanding on the edges is up to you.The latest version seen in the product pictures has thicker arm ends for more motor protection and a crossbar on one of the arms designed to mount the MiniMortal T antenna. The overall frame design has also had minor adjustments to its lines to improve durability further.
Specifications:
115mm diagonal for 3” props
T700 carbon
1.5mm thick ~4.4g (carbon only)
2mm thick 5.7g (carbon only)
3mm thick 8.8g (carbon only)
Motor protection bumper
FC Mounting: 25.4x25.4mm M2 (Whoop mount)
FC Mounting: 16x16 M2 also on there
Crossbar for mounting MiniMortal T Antenna
FC mounting hardware included with frame
Includes
FPV Cycle Baby Tooth 2mm 3" Toothpick Frame Kit
This is a unique stack for the demands of the industry today. It has a 25.5x25.5 M2 (Whoop) mount pattern because there are now many frames that are designed with that pattern.
The problem is that high-powered AIO boards are way overpriced due to the forever chip shortage and still have a high failure rate. Much of the failures are associated with the cramped space constraints of the small board. We split the ESC and FC but called for the ESC to have a nearly empty top side and the FC to have nearly all its components on the bottom and sit inside the footprint of the ESC solder pads. ALL of the FC's solder pads are also on the TOP. When you assemble the stack inside your frame, you will be able to access and solder ALL pads on BOTH boards. Additionally, the FC has a black box chip which is rare on AIO boards.
Check out our other AIO Flight Controllers and our Darwin FPV products!
Specifications
F722
MCU: STM32F722RET6(216MHz)
Gyro: MPU6000
Barometer: BMP280(I2C)
OSD Chip: Betaflight OSD AT7456E
Blackbox: 16MB
UARTS: 5
I2C: SDA / SLA pads
LED: Yes
Beeper: Yes
Firmware Target: DARWINF722HD
FC Mounting Pattern: 25.5x25.5mm
Dimensions: 37x36x10.8mm
4in1 ESC
Input Voltage: 3-6S
Max. Continuous Current: 50A
Max. Burst Current: 60A
MCU: EFM8BB21F16G
BEC: 5V/2A and 10V/2A
Current Sensor: Yes (Scale 125)
Mounting Dimensions: 25.5x25.5mm(M2)
Dimensions 37x36x10.8mm
Includes
1x FPV Cycle Darwin FPV F722 25x25 Flight Controller
1x FPV Cycle Darwin FPV 45A 3-6S 25x25 4in1 ESC
1x XT60-7CM-14AWG Power cables
1x 25V 470uF capacitor
8 x M2*6.5mm Damping rings
4 x M2 nuts
Wiring Diagram
The Glide Floss is built to work for you. While it comes in nicer carbon with pretty finishes, its focus is convenience and compatibility rather than aesthetics. The arms are also easy to swap so you can go back and forth. This design comes from the legacy of Hyperlite and Floss frames with optimizations over all freestyle frames in the series before it. If you’re running a Flowride or FlosStyle, we know you love them but overall this design is better balanced, easier to build and maintain, stronger and comes in better carbon.
Check out all our 5" Frame Kits and the rest of our FPVCycle Collection
Features
Fits 5.1” props
Premium materials
True X layout
One central 30x30/20x20 mounting platform flanked by two 20x20 platforms all accessible at all times with no interference.
No stack screws touch any arm parts. No arm/stack integration.
Two screws per independent arm with bracing against other arms. Easy swaps and secure fit.
23mm standoffs (fits vista with low cam tilt, 25mm recommended for DJI standard cam)
GoPro mount platform compatible with legacy FlossStyle and Flowride mounts.
12.9 hardness steel screws and steel press-nuts because ain't nobody got time for stripped aluminum. (switched back to black because it’s stronger)
Micro and Nano sized FPV camera spacing (20mm wide or narrower)
Motor mount pattern: 16x16 and 19x19
Frame weight fully built with FPV cam mount: 99g
Includes
1x FPV Cycle Glide 5" Frame
At its inception, the Toothpick formula was to turn a whoop inside out and give it the ability to perform like a much larger craft. Just a typical brushless AIO whoop board with similar motors but very large, very light 65mm(2.5in) props on a very light frame. The resulting performance was jaw dropping in any configuration from an AUW of ~37g on 1S to 73g on 2S and pure wackiness on 3S.The goal with the Toothpick project was first and foremost to be safe for almost any environment, fully legal, quiet, durable, reliable and most importantly, loads of fun! These features should not be compatible with each other but the magic of crazy disk loading and power radios made it possible.As with anything, the more you do it, the more developed and fine tuned your tools become. Like a surgeon that gets better at their craft and graduates to more and more developed instruments, the TP3 is literally a refined, purpose built, surgical instrument of the sky. If built to top end spec on 3S, this sucker is a frikin bullet! So throw that safety out the window. However the same setup on 2S becomes a very safe friend :-). Just as safe as the original Toothpick setup. The noise profile on 2S is significantly quieter than a 65mm/2.5” Toothpick twin blade on 2S. On 3S it’s still slightly quieter than a top power spec 65mm/2.5” Toothpick.The TP3 formula is similar to the original. Extremely low weight, large props for such a low weight and the smallest motor that can spin that prop with good control. The pudding is in the details however and we spent months intensely testing everything just to find out that what we’re looking for doesn’t exist! So we started making custom parts. There is a lot in how it’s setup as well but that’s better left to the video than writing pages on pages...Starting with the prop, we knew what we wanted but it didn’t exist. Having a good relationship with Gemfan, we carefully crafted a prop together and they got working on manufacturing. With the prop in mind, we then tested custom motor products from just about every known company out there before landing on a couple of gems...that only became good with numerous revisions. Other manufacturers will figure it out and give us more options in time but the two we have now are stellar. Given the crazy performance we were after, the frame also needed to be reimagined to perform and hold up to a new level of punishment. Next, we had to solve the annoyance with whoop boards and how difficult they were to solder. FullSpeed and BetaFPV were instrumental in the execution of the redesign and we now have two great options in case one runs into QC or reliability issues. The rest of the build is arbitrary but we prefer just a basic camera and Vtx to keep the weight down.
Performance wise, this thing is FAST. FAST fast. There are probably other things in this size class that are faster in a straight line, but that's not what we mean by fast. It’s like flying a laser pointer, it just does EXACTLY what you want it to do with absolute precision. Throttle control is also exquisite. It's a bit difficult to explain all the performance in words but when you fly one, you'll understand. The performance profile on a low weight load out also fits a Betaflight stock tune with just a little more TPA.Durability is one area that may be in question and is where we need to put a little bit of a disclaimer on this style build. When built to top spec on 3S, this thing is VERY FAST and INSANELY AGILE. This build is designed for advanced pilots but it doesn’t mean that it’s weak or not for beginners. That’s actually far from true. The frame is quite robust, motors are quality built and even the prop shaft is beefed up. When you first learn to ski or snowboard, you fall. You fall a LOT. It hurts. As you improve, you learn how to fall. Pro level athletes do amazing things and also know how to fall amazingly well. As an FPV pilot, you learn how not to break your equipment….or, balls to the wall and you know you’re going to break it and are okay with it. To achieve this level of performance, high durability has been replaced with repairability. It definitely still takes quite a bit of force to break an arm. The extremely low weight means that if you’re a beginner and running 2S, it’ll be quite difficult to break. It really only becomes a hazard to itself when you're darting around at high speeds.This thing is so incredibly easy to fly with its low weight and incredible control, it’s exactly what the advanced pilot needs to push their own limits and exactly what the novice wants to learn on.
Check out all our 2-3" Frame Kits and the rest of our FPVCycle Collection
Features
Multi Unit design
T700 carbon in 0.5mm laminate thickness (thinner is better, typical is 1.5mm)
~9-10g built frame base with hardware (some variation)
1.5mm body plates, 2.5mm arms
Accepts 1”x1” typical whoop mounting platform
Good quality carbon but no chamfers to keep costs down
Made to be used. Not a shelf ornament.
Every line on this design is very delicately crafted for optimization
Repairability when you smash it
Skinnier arms for less thrust deflection and rotational drag
Similar weight to a monobody of the same or lesser durability
Cheaper to maintain
Easier to repair and maintain
Doesn’t ruin your flying day due to a crash
Recommendations
Under 109g AUW with 3S 450mah
Under 95g on 2S 450mah
No smaller or larger than 450mah cells in 3S or 2S
Press fit props on a 2mm prop shaft motor
No more than ~7g per motor
NO TPU SHOES ON THE ARMS!
Includes
1x FPV Cycle Toothpick 3 3" Frame - TP3
