Products
Traxxas 103076-4, Spartan SR 6S (Self Righting) 36" Brushless Boat (Optional Trailer Available)
103076-4, Spartan SR 6S (Self Righting) 36" Brushless Boat (Optional Trailer Available) 36″ Reinforced Deep-V Hull Made from lightweight vacuum-formed ABS Self-righting flood chamber Pre-applied graphics Quick-release electronics tray Rigid Injection-Molded Clipless Hatch Four quick-release hatch nuts with tool Foam seal keeps water out Includes optional tool-free wingnuts Up to 50 MPH with Dual 3s LiPo Batteries VXL-6s™ Marine Electronic Speed Control Water-cooled case Three drive profiles Sport Mode - forward / brake / reverse Race Mode - forward / brake Training Mode™ - 50% forward / brake / 50% reverse (patented) Built-in two-stage low-voltage detection for LiPo batteries NiMH battery packs: 14 cells (16.8 volts) LiPo battery packs: 4-6 cells (14.8 to 22.2 volts) Velineon 540XL Brushless Motor Ultra high-temperature sintered Neodymium magnets Efficient, high-speed ball bearings 1800 kV 5 mm output shaft Water-cooled jacket Traxxas Stability Management (TSM) Improves straight line acceleration Never dulls throttle or slows the vehicle Adjusts from off to 100% assistance from the transmitter TQi 2.4 GHz Radio System 2-channel transmitter 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports Automatically stores and loads settings for up to 30 Traxxas Link enabled models Programmable multi-function knob Patented waterproof receiver box Extra-Long 218 mm Battery Tray Centralizes battery weight Allows fore and aft battery positioning Accommodates multiple battery configurations Secure hook and loop straps Driveline Heavy duty 4.7 mm diameter flex shaft Quick-release motor collet Blue-anodized aluminum drive strut Low-maintenance bushings High performance prop Steering Waterproof digital 2056 servo Blue-anodized aluminum rudder with water pickup Precision-Cut Stainless Steel Trim Tabs and Turn Fins Stainless Steel Hex Hardware Used Throughout This product was added to our catalog on March 14, 2024
$449.99
Traxxas 38104-1, Traxxas Blast 24" High Performance RTR Race Boat w/TQ 2.4GHz Radio, Battery & DC Charger
38104-1, Traxxas Blast 24" High Performance RTR Race Boat w/TQ 2.4GHz Radio, Battery & DC Charger The Traxxas Blast 24" High Performance RTR Race Boat is a fast, reliable and easy to drive boat. With a waterproof servo and a watertight receiver box, this is a perfect boat for lakes and larger pools. Traxxas has provided a updated set of graphics and a powerful water cooled brushed motor to provide killer looks and performance. A TQ 2-channel 2.4GHz radio system is used so that multiple boats can be used side by side with no interference. The TQ uses advanced programming that provides long range control with glitch free performance. Features: TQ™ 2.4GHz radio system 7.2V Power Cell™ NiMH battery 4-amp DC Peak Detecting Fast Charger Installed water cooling system Waterproof electronics Sealed receiver box Nautica™ waterproof electronic speed control High-torque waterproof servo Factory-applied decals Traxxas High-Current Connector Sleek styling Specifications: Hull Type: High performance modified "V" Dead Rise Angle: 20 degrees Hull Length: 23.75 inches (603 mm) Beam: 5.75 inches (146 mm) Weight: 28 ounces (.793 kg) Draft: 3.25 inches (83 mm) Speed Control Type: Nautica™ waterproof ESC Charger: 4-amp DC fast charger Battery: Traxxas 6-cell NiMH battery with iD Motor (electric): Water-cooled 540 Stinger (20-turn) Drive System: Direct drive Outdrive: Adjustable surface-piercing Radio System: Traxxas TQ 2.4GHz (3-channel) Skill Level: 1 Includes: (1) Orange Blast 24" RTR Boat (1) Traxxas TQ 2.4GHz (3-channel) (1) 4-Amp DC Fast Charger (1) 7.2V NiMH battery with iD Connector Needed to Complete: (4) AA Batteries for Transmitter This product was added to our catalog on May 7, 2021
$149.99
Traxxas 57046-4, Traxxas M41 Catamaran High Performance 6S Race Boat
57046-4, Traxxas DCB M41 Widebody 40" Catamaran High Performance 6S Race Boat w/TQi 2.4Ghz Radio & TSM Traxxas DCB M41 Widebody 40" Catamaran - Extreme Power with the Style to Match! The Traxxas DCB M41 Widebody 40" Catamaran was built for extreme power and speed. With a powerful 6s motor this boat can reach speeds in excess of 50mph! Built with a Twin-hull catamaran design the DCB M41 can handle high speeds even in less than ideal conditions. Additionally this boat is equipped with Traxxas Stability Management (TSM) bringing another level to stability that other boats cannot match. With 6s power, off the charts stability and dependable Traxxas components leave your competition at the docks with the DCB M41 Widebody! Traxxas has faithfully captured the incredible looks and performance of the DCB M41 in a detailed scale replica that is versatile, fun, and fast. Designed by DCB (Dave’s Custom Boats) founder Dave Hemmingson, is one of the largest full size models offered in the DCB M-Series. The full size boat with its precision sculpted design and a pair of Mercury Racing 1350 engines speeds across the water at 175mph! Features: 50+mph on 6S LiPo 40" DCB M41 Widebody catamaran replica Stable Twin-hull catamaran performs across waves and smooth water Water-cooled, waterproof VXL-6s Marine speed control Traxxas High-Current Connectors (patented) Velineon 540XL high-output brushless motor with high flow water-cooling jacket Quick-release Power Module integrates power system with waterproof electronics Adjustable battery trays with hook-and-loop straps Blue-anodized aluminum rudder support, rudder, and drive strut Stainless steel trim tabs, and hardware TQi 2.4GHz radio system and 5-channel receiver Access the Traxxas Link app with the Traxxas Link Wireless Module (#6511) (sold separately) Traxxas Stability Management® (TSM) makes it easy to go fast Waterproof high-torque steering servo Specifications: Hull Type: Vacu-formed ABS, catamaran, shoebox style Hull Length: 39.5" (1003mm) Overall Length: 40.6" (1030mm) Beam: 10.5" (267mm) Height: 5.95" (151mm) Deadrise & Transom: 14.5 degrees Weight: 86.7 ounces (2.46 kg) Speed Control Type: Traxxas Velineon VXL-6s, water-cooled Input Voltage: 2-6 LiPo cells (14.8-22.2 volts DC) BEC Voltage: 6.0 VDC BEC Current: 3A Thermal Protection: Thermal shutdown Low Voltage Detection: Yes (user enabled) Motor (electric): Traxxas Velineon 540XL Brushless, water-cooled Drive System: Direct drive, 0.15 inch flex cable Outdrive: Adjustable aluminum Prop: 2-blade composite, 42x59mm Transmitter: TQi 2.4GHz (2-channel) Receiver: 6533 2.4GHz Traxxas Stability Management 5-channel Servo: 2056 High-torque waterproof Skill Level: 2 Needed To Complete: (4) "AA" Batteries (for transmitter) (2) 2S or 3S LiPo Battery w/iD Connector (1) Compatible Battery Charger This product was added to our catalog on May 1, 2022
$449.99
Traxxas 67097-4, Traxxas Rustler 4x4 Ultimate 1/10 RTR Brushless Stadium Truck w/TQi 2.4GHz Radio & Link Module
67097-4, Traxxas Rustler 4x4 Ultimate 1/10 RTR Brushless Stadium Truck w/TQi 2.4GHz Radio & Link Module The Rustler 4x4 VXL Ultimate is the ultimate Heavy Duty choice for speed enthusiasts seeking robust capabilities, boasting unparalleled agility and unstoppable 4WD traction. Beneath its reinforced clipless body, the Rustler's low and broad chassis guarantees superb stability and precise maneuverability, setting the bar higher for handling prowess. Packed with both chassis and electronics updates the Rustler 4x4 is more exciting than ever! The Rustler 4x4 VXL Ultimate pre-installed Extreme Heavy Duty Upgrade Kit elevates its drivetrain and suspension to unparalleled levels of strength. Boasting reinforced components from heavy-duty suspension arms to steel wheel hubs, this upgrade kit forms the strongest driveline ever offered in a Rustler. Additionally, the clipless body mounting system ensures secure attachment and swift, single-handed removal/installation, featuring a sleek, aerodynamic design fortified by an internal rugged structure and external rollover protection. Equipped with a powerful Velineon 3500 brushless system, the Rustler Ultimate is capable of running 2S to 3S LiPo with a top speed of 60+ MPH! providing the Rustler 4x4 VXL Ultimate with all the power needed for shredding tires, doing wheelies on demand and be a robust speed weapon! Carve corners like a pro thanks to Rustler 4x4 VXL Ultimate’s adjustable sway bars and ultra-smooth, PTFE-coated aluminum GTR shocks. Rustler 4x4 VXL Ultimate’s agility and 4-wheel drive grip is further enhanced by its 2.8" Gravix tires. Pioneered on XRT, Gravix tires deliver outstanding grip on hard-packed surfaces with fast and quiet-running precision. comes fully loaded with aluminum upgrades for maximum strength and durability and they’re color-matched to the body. Brightly anodized caster and steering blocks, axle carriers, and chassis stiffener look as good as they perform and give Rustler 4x4 VXL Ultimate the brute strength required for extreme driving. A Traxxas Link Wireless Module comes standard on Rustler 4x4 VXL Ultimate along with factory-installed telemetry sensors to unlock the full potential of the TQi transmitter. Adjust the transmitter’s settings on the fly and record real-time telemetry data like speed, RPM, and battery voltage on your mobile device using the free Traxxas Link app! Features: Velineon 3500 Brushless Power System: Capable of running 2S to 3S LiPo with a top speed of 60+ MPH! Extreme Heavy Duty Upgrade Kit: Upgraded drivetrain and suspension components for ultimate strength, including HD suspension arms and steel wheel hubs Clipless Body Mounting: Secure body latching system for easy one-handed removal/installation, aerodynamic design with rugged internal structure for durability Modular Chassis: Easily perform maintenance and repairs with the Rustler 4x4's modular chassis design Ultimate Features: Anodized aluminum chassis stiffener brace CNC-machined anodized aluminum caster, steering blocks and hub carriers Extremely lightweight aluminum center driveshaft Blue anodized PTFE-coated aluminum GTR shocks with nitride coated shafts Factory installed composite body reinforcement Low CG (Center of Gravity) chassis Adjustable front and rear sway bars High speed metal gear servo All-Terrain Gravix tires on RXT wheels Specifications: Scale: 1/10 Length: 18" (457mm) Width: 12.94" (329mm) Wheelbase: 11.6" (295mm) Weight: 5.13lbs (2.33kg) Drive: 4WD Power Source: Electric Input Voltage: 6-7 cells (7.2-8.4V) NiMH 2-3S (7.4-11.1V) LiPo Gear Ratio: 12.81:1 Assembly Level: Ready To Run Includes: (1) Rustler Ultimate 1/10 4x4 Brushless RTR Stadium Truck (1) User Manual Needed to Complete: (1) 6-7 Cells NiMH or (2-3S) LiPo Battery w/iD Connector (1) Compatible Battery Charger (4) (AA) Batteries for Transmitter This product was added to our catalog on November 11, 2023
$529.99
Traxxas 67376-4, Traxxas Rustler 4x4 VXL Brushless RTR 1/10 4WD Stadium Truck (Blue) w/TQi 2.4GHz Radio & TSM
67376-4, Traxxas Rustler 4x4 VXL Brushless RTR 1/10 4WD Stadium Truck (Blue) w/TQi 2.4GHz Radio & TSM This product was added to our catalog on March 28, 2024
$399.99
Traxxas 71054-8, Traxxas E-Revo 1/16 4WD RTR Truck w/XL-2.5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger
71054-8, Traxxas E-Revo 1/16 4WD RTR Truck w/XL-2.5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger Traxxas E-Revo Brushed 1/16 4WD RTR Monster Truck. Don’t let the smaller size fool you, this little brushed monster truck packs all the power and durability to deliver a thrilling and fun experience. Packed under the factory-finished polycarbonate shell, you’ll find the same suspension technology found in the renowned Traxxas Revo, all-weather ready powerful brushed electronics with all the speed, quality, and performance you crave in a convenient 1/16 scale all-out offroad excitement, anytime, anywhere! This 1/16 E-Revo takes all the track-proven innovation of the full-size E-Revo and scales it down to a convenient go-anywhere size. E-Revo's rocker-actuated suspension has been expertly adapted to 1/16 scale with its oil-filled, threaded-body GTR shocks. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. E-Revo's monocoque chassis balances strength and weight to far surpass the standards of the "mini" category. Built specifically for Traxxas 1/16 scale models, the XL-2.5 speed control and Titan 12-Turn 550 motor are fully LiPo compatible with low-voltage detection for 2S LiPo packs and rated for 6-cells NiMH, this powerful combo gives E-Revo precise throttle control and a top speed of 20+ MPH out of the box! Get the 1/16 E-Revo to get a taste of all the thrills, fun and durability this legendary mini basher can offer and find out why it set the bar really high for all these years to become one of the most sought-after mini R/C cars! CHARGER NOTE: Power adapter and cable sold separately. For maximum charging rate, please use the Traxxas Power Adapter and Traxxas Charging Cable (TRA2912 & TRA2916 - both sold separately). Features: Fully Assembled and ready-to-run Waterproof powerful brushed electronics External gear cover with easy slipper access Rocker-actuated suspension and threaded oil-filled GTR shocks Full-time 4WD Ball-Bearing transmission With Torque-Control slipper clutch Sealed silicone-filled differentials Equipped with a 2-amp USB-C fast charger! Dual battery compartments with quick-release doors Up to 20+mph with included NiMH battery Specifications: Scale: 1/16 Length: 12.9" (328mm) Width: 9.4" (239mm) Height: 4.6" (117mm) Wheelbase: 7.9" (202mm) Weight: 44oz (1.24kg) Power Source: Electric Input Voltage: 6-cells (7.2V) NiMH 2S (7.4V) LiPo Drive: Shaft-driven 4WD Gear Pitch: 48P Gear Ratio: 5.04:1, (Final drive: 9.72:1) Assembly: Ready-To-Run Includes: (1) Traxxas E-Revo 1/16 RTR 4WD Monster Truck (1) 2-Amp USB-C Fast Charger (1) NiMH Battery with Traxxas ID (1) User Manual Needed to Complete: (4) (AA) for Transmitter This product was added to our catalog September 27, 2023
$229.99
Traxxas 71076-8, Traxxas E-Revo VXL Brushless 1/16 4WD RTR Monster Truck (Blue) w/VXL-3m ESC, TQi 2.4GHz Radio, Battery & USB-C Charger
71076-8, Traxxas E-Revo VXL Brushless 1/16 4WD RTR Monster Truck (Blue) w/VXL-3m ESC, TQi 2.4GHz Radio, Battery & USB-C Charger Traxxas E-Revo VXL Brushless 1/16 4WD RTR Monster Truck. Don’t let the smaller size fool you, this little brushless monster packs a huge punch. Packed under the factory-finished polycarbonate shell, you’ll find the same suspension technology found in the renowned Traxxas Revo, Velineon brushless power, and all-weather-ready electronics. Only Traxxas can give you the speed, quality, and performance you crave in a convenient 1/16 scale all-out offroad excitement, anytime, anywhere! This 1/16 E-Revo VXL takes all the track-proven innovation of the full-size E-Revo VXL and scales it down to a convenient go-anywhere size. E-Revo's rocker-actuated suspension has been expertly adapted to 1/16 scale with its oil-filled, threaded-body GTR shocks. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. E-Revo's monocoque chassis balances strength and weight to far surpass the standards of the "mini" category. Specifically designed for Traxxas 1/16 scale models, the VXL-3m speed control and Velineon 380 motor represent the latest in brushless technology. Fully LiPo compatible with low-voltage detection for 2S and 3S packs and rated for 6-12 NiMH cells, this potent, powerful combo gives E-Revo VXL precise throttle control and blistering top speed. The Velineon 380 is built with high-speed ball bearings, sintered rotor, neodymium magnets, and gold-plated 3.5 mm connectors. It all adds up to 50,000 rpm of pure power and speed! Get the 1/16 E-Revo VXL to get a taste of all the thrills, fun and durability this legendary mini basher can offer and find out why it set the bar really high for all these years to become one of the most sought-after mini R/C cars! CHARGER NOTE: Power adapter and cable sold separately. For maximum charging rate, please use the Traxxas Power Adapter and Traxxas Charging Cable (TRA2912 & TRA2916 - both sold separately). Features: Fully Assembled and ready-to-run out of the box with included battery and charger! Waterproof Velineon 380 brushless electronics Traxxas Stability Management (TSM) Rocker-actuated suspension and threaded oil-filled GTR shocks Full-time 4WD Ball-Bearing transmission With Torque-Control slipper clutch Sealed silicone-filled differentials Equipped with a 2-amp USB-C fast charger! Dual battery compartments with quick-release doors Up to 30+mph with included NiMH battery and 50+ mph with an additional NiMH battery (Sold-Separately) Specifications: Scale: 1/16 Length: 12.9" (328mm) Width: 9.4" (239mm) Height: 4.6" (117mm) Wheelbase: 7.9" (202mm) Weight: 38oz (1.09kg) Power Source: Electric Input Voltage: 6-12 cells (7.2V-14.4V) NiMH 2-3S (7.4V-11.1V) LiPo Drive: Shaft-driven 4WD Gear Pitch: 48P Gear Ratio: 5.04:1, (Final drive: 9.72:1) Assembly Level: Ready-To-Run Includes: (1) E-Revo VXL Brushless 1/16 4WD RTR Monster Truck (1) 2-Amp USB-C Fast Charger (1) NiMH Battery with Traxxas ID Connector Needed to Complete: (4) (AA) for Transmitter This product was added to our catalog on September 27, 2023
$299.99
Traxxas 82024-4 - TRX-4® Sport: 1/10 Scale 4WD Electric Truck. Ready-to-Race® with TQ 2.4GHz Radio System, XL-5 HV ESC (fwd/rev), and Titan® 550 motor.
82024-4 - TRX-4® Sport: 1/10 Scale 4WD Electric Truck. Ready-to-Race® with TQ 2.4GHz Radio System, XL-5 HV ESC (fwd/rev), and Titan® 550 motor. Built To Perform The Traxxas TRX-4 Sport is a technical powerhouse purpose-built from the ground up to conquer any terrain. The Sport packs in all the features necessary for crawling while keeping weight as low as possible. Portal axles provide unprecedented ground clearance with the smooth damping action of aluminum GTS shocks. The lightweight body keeps the CG low for sure-footed climbing and permanently locked differentials transform the motor’s torque into unstoppable forward motion. Built Traxxas-Tough, the Sport adds a dedicated hardcore crawler to the powerful TRX-4 lineup. MODEL 82024-4: 1/10 Scale 4X4 Crawler, Fully-Assembled, Waterproof Electronics,Ready-To-Drive®, with TQ™ 2.4GHz 2-Channel Radio System, XL-5 HV Speed Control, and Painted Body
$399.95
Traxxas 92076-4 - TRX-4® Scale and Trail™ Crawler with 2021 Ford Bronco Body: 1/10 Scale 4WD Electric Truck.
92076-4 - TRX-4® Scale and Trail™ Crawler with 2021 Ford Bronco Body: 1/10 Scale 4WD Electric Truck. Ready-to-Drive® with TQi Traxxas Link™ Enabled 2.4GHz Radio System, XL-5 HV ESC (fwd/rev), and Titan® 550 motor. AN OFF-ROAD LEGEND RETURNS After 25 years, the Bronco returns as Ford’s top-performing 4X4 and America’s most sought-after SUV. Traxxas captures the eagerly-anticipated Bronco in exacting detail with all the capability and versatility of the award-winning TRX-4. The Traxxas Bronco combines Ford-approved realism and class-leading performance for exciting off-road adventure no matter where the trail takes you. MODEL 92076-4: 1/10 Scale 4X4 Trail Truck, Fully-Assembled, Waterproof electronics,Ready-To-Drive®, with TQi™ 2.4GHz 4-channel Radio System, XL-5 HV Speed Control,Hi/Low Transmission, Remote Locking Differentials, and painted body Ford Motor Company Trademarks and Trade Dress used under license to Traxxas.
$499.99
Spektrum ARAG1023
SPMXSM2000, Spektrum RC Firma 3660 4-Pole Brushless Motor (3200kV) Spektrum RC Firma 3660 4-Pole Brushless Motor. This motor makes a great option for most Arrma 3S BLX models. Package includes one brushless motor. This product was added to our catalog on April 15, 2021
$114.99
ARRMA ARAG1023, AR390214 BLX3660 3200kV Brshls 10th 4-Pole Mtr 4x4
ARAG1023, AR390214 BLX3660 3200kV Brshls 10th 4-Pole Mtr 4x4 The Arrma BLX 3660kV brushless motor provides lots of speed and torque, and is perfectly balanced for use with the ARRMA BLX100 ESC unit. Features: A beautifully etched black aluminum motor can provides a premium look, while a 4 pole internal configuration keeps the power supply smooth and consistent Gold bullet connectors ensure fast and easy wire removal when you need to clean your vehicle - The aluminum motor can provides increased heat dissipation via the finned body section Recommended for use with AR390069 - BLX100 BRUSHLESS 3S ESC Specifications: Motor Type: Brushless Motor kV (# of Turns for brushed): 3200V Poles: 4 Pole Motor Length: 60mm / 2.36" Diameter: 30mm / 1.18" Shaft Length: 18.5mm / 0.73" Shaft Diameter: 5mm / 0.2" Motor Mounting Hole Diameter: M3 Motor Cable Length (Including Connector): 45mm / 1.77" Motor Connector Diameter: 4mm / 0.16" Motor Weight: 289g / 9.18 oz Includes: (1) BLX 3200kV Brushless Motor This product was added to our catalog on April 15, 2021
$114.99
Axial AXIC2400, AX24004. AM27 540 27T Electric Motor
AXIC2400, AX24004. AM27 540 27T Electric Motor
$16.99
Castle Creations CSE010-0079-00, Castle Creations Castle Link Quick Connect
CSE010-0079-00, Castle Creations Castle Link Quick Connect This is the Castle Creations Castle Link Quick Connect. Experienced modelers go to great pains to tie down their servo and throttle leads, and some find unplugging a Castle controller from the RX disrupts all their work. Many have asked for something like a Y connector that gives an open lead for easy Castle linking, but a traditional Y harness doesn't work when the other branch of the Y is connected to an RX, the signal line must be disconnected from the RX.Castle Quick Connect does just that. It detects the presence of a Castle Link adapter on the free lead and switches the controller's signal line from the RX to the Castle Link. Easy as that. Specifications: Weight: 0.25 oz (5.4g) Connector Type: Universal Wire length: to RX: 4" (13cm) to CL: 12" (35cm) This product was added to our catalog on August 31, 2021
$18.99
Castle Creations CSE010-0115-00, Castle Creations Sidewinder 3 Waterproof 1/10 Sport ESC
CSE010-0115-00, Castle Creations Sidewinder 3 Waterproof 1/10 Sport ESC This is the Castle Creations Sidewinder 3 Waterproof 1/10 Sport ESC. Castle’s Sidewinder ESC is now waterproof! The Sidewinder 3 can power crawlers on water filled trails, AWD's in rain soaked parking lots, and SCT's on adventures through muddy fields. Drivers can now give in to those irresistible urges to drive in the mud or rip through puddles without damaging their ESC.Designed for 1/10thThe Sidewinder 3 is a great fit for 1/10th off-road, on-road, and rock crawlers running up to 3S LiPo. It features updated circuitry for faster response time and improved reliability. As always, the Sidewinder 3 offers industry-leading software functions and USB programming capability via Castle Link USB adapter (sold separately).Amazing PriceThe Sidewinder 3 offers world class performance at an entry level price.Legal mumbo jumboAlthough Sidewinder 3 and Castle brushless motors are waterproof, always rinse the ESC and motor with fresh water after exposure to corrosives or dirt. While the motor and controller may be waterproof, Castle suggests users confirm that the rest of their vehicle, including the batteries, servo, radio and chassis, are also waterproof before exposing them to liquids of any kind. Specifications: Input Voltage: MIN: 2s LiPo; MAX: 3s LiPo BEC: 5.0V, 2A Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes - with lockout Size (LxWxH): 1.93x1.48x0.79" (49x38x20mm) Weight (w/127mm long battery wires and no battery connector): 1.96 oz (55.5g) *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. This product was added to our catalog on January 20,2024
$79.99
Castle Creations CSE010-0165-00, Castle Creations Mamba Monster X 8S 1/6 Brushless ESC
CSE010-0165-00, Castle Creations Mamba Monster X 8S 1/6 Brushless ESC The Castle Creations Mamba Monster X 8S 1/6 Brushless ESC features CRYO-DRIVE™ - Castle’s latest break-through technology. CRYO-DRIVE minimizes the amount of time the ESC’s electrical components spend generating heat. This proprietary software advancement works in parallel with a unique open housing design and a forged elliptical fin heatsink to allow increased directional airflow to cool critical components. Combine this with a high speed 40mm fan and you have a design that maximizes airflow through the system, taking thermal performance to the next level. The results are cooler ESC temperatures, increased runtime and more power handling. Mamba Monster X 8S is designed for 1/6 scale vehicles weighing up to 25 lbs. with up to 8S LiPo. Compatible models include the Traxxas X-Maxx & Unlimited Desert Racer; Arrma Kraton 8s & Limitless; Losi Super Rock Rey & Audi R8; Redcat Shredder. Features: Input voltage range 2S-8S LiPo Sensored, Sensorless and SmartSense™ running modes Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V) Premium forged heatsink with elliptical fins for superior airflow and increased heat dissipation Oversized factory equipped thermally controlled 40mm fan ? Waterproof design for all weather conditions ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the components and promote efficient heat transfer Data-logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for “on the-fly” adjustments using your transmitter Audible alerts for easy diagnosis of possible issues such as motor over-temperature and low voltage cutoff Convenient transmitter programming for six adjustable settings such as cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store Proudly designed and manufactured in Olathe, Kansas USA and backed by Castle Creations’ 1 year warranty Specifications: Application guidelines: 1:6 scale RC hobby vehicles weighing up to 25 lbs Running Modes: Sensored, Sensorless and SmartSense™ (when paired with a Castle 4-POLE 12SLOT sensored motor) Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. Or 8.0V (8A Peak), default 5.5V Operating environment: Waterproof design enables use in nearly any environment Brake: Proportional Reversible: Yes, but may be disabled for racing On /off switch: Yes, waterproof Cooling fan: Yes, factory equipped (40mm), fully removable (See Product Use Statements for more info) Size: L x W x H 69.5mm x 54.1mm x 47mm Weight (w/wires): 5.75 oz. (163 grams) Connector type: 6.5mm female bullets for motor connection Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters. This product was added to our catalog on May 14, 2021
$214.99
Castle Creations CSE010-0165-01, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/2028 Sensored Motor (800kV)
CSE010-0165-01, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/2028 Sensored Motor (800kV) The Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo with 2028 Sensored Motor is a great way to take your build to the next level with Castle’s cutting edge sensored large scale brushless power. The MAMBA MONSTER X 8S COMBO is ready to power any R/C vehicle weighing up to 25lbs, and running all the way up to 8S LiPo. This motor and ESC combo is designed for heavy, high speed rigs, and you'll experience smooth low-end control, without sacrificing power, punch, or speed. The MAMBA MONSTER X 8S utilizes Castle’s breakthrough technology, CRYO-DRIVE. By reducing the rate at which the ESC heats up and removing heat more efficiently, your setup will be able to handle higher gear ratios, in heavier vehicles, with longer runs. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a whole new level. The ESC was designed with a robust aluminum casing, and the epoxy potting guarantees protection around the circuitry and ensures all-weather use. Mamba Monster X 8S is a beast, ready to take on the harshest of environments and still perform. You can easily optimize the ESC for any driving condition, from rugged terrain to smooth pavement to the perils of rock and gravel. Create, save and download setup profiles through the Castle Link Programming Suite on your Windows™ PC, or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. When paired with the Castle sensored 2028-800KV motor, users with heavy, high power rigs will experience controllable low-end control without sacrificing power, punch or speed. SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs. NOTE: This is not a direct replacement to the Mamba XLX. The XLX still handles rawer full throttle power in the most extreme setups. Features: ESC: Input Voltage Range 2S-8S LiPo Sensorless, Sensored and SmartSense™ Running Modes Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation Oversized factory equipped thermally controlled 40MM cooling fan Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters Waterproof design for all weather conditions Data logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty Motor: The 2028 Extreme can easily run in the 10 horsepower range (Burst power output for duration's typical of vehicle acceleration.) Running modes include Sensored and an ULTRA-EFFICIENT sensorless mode. High-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. Proprietary winding techniques allow Castle Creations to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. Dual sensor ports to ensure optimal installation in your large-scale vehicle. Updated modern and sleek design that looks as cool as it performs. Specifications: ESC: Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (40MM), fully removable** (See Product Use Statements below) Size: L x W x H 69.5mm x 54.1mm x 47mm Weight (with no battery connector): 5.75 oz. (163 grams) Connectors: 6.5mm female bullets for motor connection Motor: Input Voltage Range: 12S MAX Kv: 800 Max. RPM: 45,000 Minimum Input Voltage: 3S Maximum Input Voltage: 12S Sensored Capable: Yes Can Length: 4.4" (113.2mm) Can Diameter: 2.2" (57mm) Weight (w/wires): 44 oz./1.25kg Shaft Size: Length: 30mm Diameter: 8mm Mounting Hole Specifications: 4mm holes @ 30mm spacing. Cooling Fan: Available, but not included. See 011-0019-00 here. Connectors: 8.0mm male connectors Recommended ESC: Mamba XL X Running modes: Sensorless and Sensored Max. Recommended Vehicle Weight: 4WD vehicles weighing less than 25lbs. 2WD vehicles weighing less than 30lbs. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters. Product Use Statements: Recommended battery capacity for 1:6th scale vehicles is 5000mah. Castle recommends using 50C continuous discharge or higher LiPo batteries. Surge ratings should never be used to determine a pack’s suitability for a brushless application. Castle recommends a high current connector designed for high-powered electric systems, rated for 100+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors. Applying voltages higher than 33.6V will cause irreparable damage to ESC. Although Mamba Monster X 8S is waterproof, it is NOT intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt. The cooling fan must be removed prior to driving in wet conditions. *Fan is not waterproof. Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the motor or ESC. The 2028-800KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommends applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to the Running & Maintaining document in the resources tab above for info on running and maintaining motors in wet environments. Application Guidelines: Mamba Monster X 8S and 2028-800Kv motor is intended for use in 1:6 scale vehicles weighing up to 25 lbs. and up to 8S LiPo. Vehicle Examples: Traxxas™ X-Maxx & Unlimited Desert Racer; Arrma™ Kraton 8s & Limitless; Losi™ Super Rock Rey & Audi R8; Redcat™ Shredder (optional motor mount and modifications may be necessary to install motor). Includes: Mamba Monster X 8S ESC 4-POLE Sensored 2028-800KV Motor Castle Sensor Harness Adapter (installed) 250mm Sensor Wire Mamba Decals Coupon for free Castle Link USB ESC Quick Start Guide Motor Quick Start Guide This product was added to our catalog on April 4, 2021
$454.99
Castle Creations CSE010-0167-01, Castle Creations Mamba XLX 2 1/5 Sensored Brushless ESC/Motor Combo (800Kv) w/2028 Motor
CSE010-0167-01, Castle Creations Mamba XLX 2 1/5 Sensored Brushless ESC/Motor Combo (800Kv) w/2028 Motor The Castle Creations Mamba XLX 2 1/5 Scale Sensored Brushless ESC/Motor Combo with 2028 800Kv motor is a product guaranteed to redefine the limits of large scale R/C. Though it shares the name of its predecessor, the Mamba XLX, this is an ESC that lives in a class of its own. Reengineered from the ground up, the Mamba XLX 2 is packed with a potent combination of design, hardware and software advancements that will set a new standard for large-scale power systems. Designed for 1/5 Scale models weighing up to 42 lbs, the XLX 2 is an incredible power upgrade for the Losi DBXL-E and Super Rock Rey, Arrma Kraton 8S and Outcast 8S, or Traxxas X-Maxx models! If you are looking for the ultimate upgrade for your speed run, drag racing or off road rigs - the XLX 2 is a true heavyweight, with no contenders. CRYO-DRIVE: MORE POWER – COOLER TEMPS – LONGER RUNS Castle’s latest break-through technology, minimizes the amount of time the ESC’s electrical components spend generating heat. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 50mm fan and a forged elliptical fin heatsink, the design maximizes airflow through the system, taking thermal performance to the next level. The results are cooler ESC temperatures, increased runtime and more power handling. NOTE: Some vehicles may require aftermarket parts to allow ESC and/or motor fitment. Features: Sensored, Sensorless and SmartSense™ running modes Powerful Integrated 20A Peak Adjustable BEC (5.25V-8.0V) Premium forged heatsink with for superior airflow and increased heat dissipation Oversized factory equipped thermally controlled 50mm fan Waterproof design for all weather conditions. ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the components and promote efficient heat transfer Data-logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for “on the-fly” adjustments using your transmitter Audible alerts for easy diagnosis of possible issues such as motor over-temperature and low voltage cutoff Convenient transmitter programming for six adjustable settings such as cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options. Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store. Proudly designed and manufactured in Olathe, Kansas USA and backed by Castle Creations’ 1-year warranty Specifications: ESC: Input voltage range: 3S-8S LiPo Length: 3.98” (101.2mm) Width: 2.49” (63.3mm) Height: 2.2” (55.8mm) On/Off Switch: Yes, waterproof* Cooling Fan: Yes, thermally controlled factory equipped (50mm) fully removable** Weight: 13.1 oz (371g) Running Modes: Sensored, Brushed, Sensorless and SmartSense™ when paired with a Castle 4-POLE 12-SLOT Sensored Motor. (Dust cover included in package for non-sensored operation) Wire Gauge: 8AWG Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX, T7PXR Transmitters. Items Needed: Battery connectors designed for 150+ amps continuous, such as Castle 6.5mm polarized or CC BULLET 8.0MM Motor: Application Guidelines: 1:5th Scale vehicles weighing up to 30 lbs. Vehicle Examples: Losi DB XL-E,™ Losi Super Rock Rey™, Arrma Kraton 8s™, Arrma Outcast 8s™, Traxxas X-Maxx™ (Some vehicles may require aftermarket parts to allow ESC and/or motor fitment) Input Voltage Range: MIN: 3S LiPo, MAX: 8S LiPo 33.6V Kv: 800Kv Max. RPM: 45,000 Diameter: 2.22” (56.3mm) Length: 4.44” (112.7mm) Shaft Size: 30mm (Length), 8mm (Diameter) Weight (w/wires): 44 oz./1.25kg Mounting Hole Specifications: Holes: 4mm, Spacing: 30mm Connectors: 8.0mm male connectors, 300mm Direct Connect Sensor Wire Includes: Mamba XLX2 ESC 2028-800kv Sensored Brushless Motor 300mm Direct Connect Sensor Wire Mamba Decals Mamba XLX2 Quick Start Guide Sensor port dust cover Coupon for free Castle Link USB This product was added to our catalog on October 12, 2021
$499.99
Castle Creations CSE010016001, Castle Creations Mamba X SCT 1/10 Brushless Combo w/1415 Sensored Motor (2400kV) (5mm Shaft)
CSE010016001, Castle Creations Mamba X SCT 1/10 Brushless Combo w/1415 Sensored Motor (2400kV) (5mm Shaft) The Castle Creations Mamba X SCT Waterproof 1/10 Brushless Combo includes the Mamba X, with the awesome 1415 Sensored motor to create a all in one system perfect for 2WD and 4WD Short Course trucks weighing up to 6.5lbs running on a 3s or 4s LiPo. The Mamba X is going to shake things up. Extremely versatile, and capable of powering a wide variety of applications and vehicles the Mamba X is ideal for racing at the track with your 2wd buggy, bashing through mud puddles in your monster truck, or navigating a hardcore trail with your crawler. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale race buggies. Castle Creations 1415 Sensored 4-Pole Brushless Motors combine rotor position sensor technology with an improved high power and high efficiency motor design to deliver ultra smooth startup, precise low speed control, predictable power delivery, incredible torque, and lightning fast response. Through the use of Castle's Smart Sense technology, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup, and allows the 1406 to deliver PRECISE throttle control and BUTTERY SMOOTH starts - with the RAW POWER and LONGER RUN TIMES that Castle motors are known for. Features: ESC Wide 2S to 6S input voltage range Sensored Motor Support (Castle X-Series Sensor Harness Included) Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30mm Cooling Fan Integrated 4mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts The Mamba X is proudly designed and manufactured in Olathe, Kansas Backed by Castle Creations’ 1-year warranty and unparalleled "make-it-right" customer support Motor 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT Oversized gold plated solder tabs for LESS RESISTANCE and easy soldering QUIETSENSE™ Technology shields magnetic field noise generated from the motor coils and keeps motor and ESC in sync at all times HIGHER PRECISION and MORE EFFICIENT startups OPTIMIZED design eliminates the need for mechanical timing adjustments Sensor alignment method delivers uniform timing and torque in both directions, automatically REBUILDABLE design allows users to replace front end bell with bearings or rotors with shaft ROAR standard sensor port and labeled connections High strength 180°C neodymium sintered magnets High quality, temperature-stabilized sensors High-purity, high-temperature copper windings Hardened stainless steel shaft 13 AWG high strand wire with silicone insulation Kevlar wrapped rotor 6061-T6 Billet aluminum heatsink can High RPM NMB oversized bearings High quality 0.2mm steel laminations Low resistance gold plated bullet connectors Specifications: ESC Input Voltage Range: 2S LiPo (7.4V) to 6S LiPo (25.2V) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) Size (LxWxH): 2.14x1.39x1.18" (54.4x35.2x30.0mm) Weight (with wires): 3.56 oz. (101g) Connectors: 4.0mm female bullets for motor connection. Items Needed for Operation: Battery Connector Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 9bs/4kg, with batteries, ready-to-run Telemetry Link Capable: Yes Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Motor Input Voltage Range: 3-4S LiPo Kv: 2400 Max. RPM: 75,000 Length: 69.5mm Diameter: 36mm Weight (w/wires): 319g / 11.3oz Shaft Length: 21mm Shaft Diameter: 0.197" (5mm) Mounting Hole: M3 @ 25mm Cooling Fan: Optional, coming soon! Connectors: 4mm male Castle Bullet Connectors Recommended ESC (s): Combo includes Mamba X ESC. Recommended Applications: 2WD and 4WD Short Course trucks weighing up to 6.5lbs running on a 3s or 4s LiPo with included 1415 - 2400kv sensored motor. Running Modes: SMARTSENSE™, Sensored, Sensorless Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, Castle suggests users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs This product was added to our catalog on February 16, 2021
$292.95 $275.00
Castle Creations CSE011-0119-00, Castle Creations Castle Link V3 USB Programmer Adapter
CSE011-0119-00, Castle Creations Castle Link V3 USB Programmer Adapter The Castle Creations Castle Link contains a proprietary interface adapter and standard USB cable that will give you in depth access to the programmable parameters of your Castle Creations ESC. All you need is an available USB port on your PC. Program your Castle brushless ESCs and accessories on your Windows® PC with the Castle Link USB programming kit. Set up of programmable options with point and click ease View your current program settings Air users can customize values for low-voltage cutoff, prop brake strength, governor gain and more Surface users can customize values for low-voltage cutoff, drag brake, torque limiting and more Download new software updates as they become available Simple programming interface featuring: All-in-one support for all Phoenix, Talon, Thunderbird, QuadPack, DMR, Mamba, Sidewinder, and Hydra controllers, as well as accessories like Telemetry Link, as well as all of our external switching regulators (BECs). Demo Mode allows users to check available settings without connecting their Castle device to the computer Simple to install software Expanded programming and parameters for all Castle ESCs Set-up instructions: Download the interface software. Plug the Castle Link into the receiver lead on your controller and attach the mini USB cable included in the kit. Connect the USB cable to your PC. System Requirements: Castle Link is compatible with Windows Vista, Windows 7, Windows 8 and Windows 10. Note: Macintosh users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10. to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations. This product was added to our catalog on August 31, 2021
$24.99
Castle Creations CSE011-0135-00, Castle Creations B Link Bluetooth Adapter
CSE011-0135-00, Castle Creations B Link Bluetooth Adapter The Castle Creations B Link Bluetooth Adapter gives you access to powerful Castle Link ESC tuning features right from your iOS or Android smartphone! Castle Link is an essential component of customization for all Castle ESCs. While the controllers are plug and play, the benefits of fine tuning your Castle ESC through the Castle Link Programming Suite have only reinforced the sophistication and value of the Castle product line. Not only do you get the ability to adjust many variables to enhance your experience, you have the assurance that firmware updates for future features and improvements for your controller are provided at no cost to you. Discover just how easily and quickly you can reign in tuning with the release of the Castle B•LINK BLUETOOTH ADAPTER, which will allow most Castle Link compatible products to be programmed via Bluetooth enabled mobile devices using the free application, with firmware updating to be added soon. CASTLE LINK APP FEATURES:The Castle Link App contains all of the same tuning options as the Castle Link USB Programming Suite used on a Windows compatible PC, now with even greater flexibility. NOTE: All current Castle Creations ESCs, many older units and the BEC 2.0 and BEC Pro are supported, for a complete listing of compatible ESCs and accessories please view the PDF file in the resources tab above. App available for free at the Apple App Store and Google Play. Features: WIRELESS BLUETOOTH COMMUNICATION allows you to interface with most Castle Link compatible ESCs and accessories to change parameters and update firmware. DATA LOG VIEWING allows the user to view and download data logs wirelessly, giving you the information needed to fine tune your setup. COMPACT AND LIGHTWEIGHT at 1.20" x .81" x .25" (30.48mm x 20.55mm x 6.55mm) and 0.23oz (6.62g), it can be installed in the vehicle or airframe without significantly increasing model weight. CONVENIENT WATERPROOF DESIGN allows you to quickly adjust settings in the field without disconnecting or disassembling the model. It can stay installed in the model or be easily swapped between models. FREE APP DOWNLOAD is readily available in the Apple App Store or Google Play. Once downloaded it does not require a data connection so it can be used in the most remote of areas and won’t use data. EASY TO USE application can be used with multiple B-Link Bluetooth Adapters or can store model information and allow you to use one adapter on multiple models. PASSCODE PROTECTED with (user-selectable) 4-digit code to prevent unwanted tampering with your settings. SYNC information between multiple devices by creating a free account (requires internet connection to sync database). Specifications: Input Voltage: Minimum: 4.5V - Maximum: 13V Max Continuous Current: 10A Maximum Burst Current: 20A Dimensions (with wires): 7.25" x 0.81" x 0.27" (184.15mm x 20.55mm x 0.27"mm) Dimensions (w/o wires): 1.20" x 0.81" x 0.27" (30.48mm x 20.55mm x 0.27"mm) Weight: 6.62gm / 0.015lbs Needed for Operation: Castle Link App found at Apple Store or Google Play. This product was added to our catalog on May 1, 2021
$56.99
KYOSHO KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio
KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio Kyosho Seawind ReadySet Racing Yacht. The large aspect ratio of the long span keel and tight response from the push-pull rudder control make up the Seawind's race-ready specifications. Sharp acceleration brings the Seawind quickly up to full speed while exceptional energy efficiency delivers maximum stability in light winds so you can use light breeze like a pro. The classic design features a molded one-piece ABS hull factory finished in a beautiful color design that comes fitted with a 2.4GHz RC system that automatically manages frequency band selection. The sail and rudder servos are waterproof and deliver exceptional reliability under various conditions. Features: Readyset installed with 2.4Ghz R/C system realized at a value price Pre-assembled one-piece ABS hull complete with coloring The aluminum mast and boom are hard anodized for extra strength Features extruded high strength aluminum mast and boom Features pre-cut and sewn spin cloth main and jib sails Large aspect ratio keel provides low resistance and excellent performance even under strong winds The super strong structure features shaft from deck through to the ballast Ballast is lead-free for environmentally friendly specifications Equipped with a rubber cap for easy release of water from the hull Packed with accessory parts for extra detail as a display model Push-pull rudder and sail control provide sure control for sharp racing performance Features waterproof sail and rudder servo The main mast, keel, ballast and rudder can be detached without the use of any tools Specifications: Length: 998mm Width: 226mm Height: 1,850mm Weight: 3,100g R/C System: Syncro KT-431S, 2.4GHz, FHSS Sail Area: 39dm2 Servo: Sail KS9071-20SW / Rudder KS4031-06W Needed to Complete: (8) AA Batteries This product was added to our catalog on April 14, 2023
$449.99
Leopard LEO-4082X2, Leopard 4082X2, 2200Kv X2 1.5Y Brushless Motor
LEO-4082X2, Leopard 4082X2, 2200Kv X2 1.5Y Brushless Motor Leopard 4082 brushless motor.The Leopard has been the standard in High value/High quality at a low cost motor on the market. Leopard has released a new version of the popular 1600kv and 2200kv sizes, called the X2.40mm Diameter by 82mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes end-bells that are assembled with screws for both strength and ease of maintenance.
$149.95
Leopard LEO-4092, Leopard 4092 1480 Kv Motor w/ Water Cooling Jacket
LEO-4092, Leopard 4092 1480 Kv Motor w/ Water Cooling Jacket Leopard 4092 brushless motor.40mm Diameter by 92mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance. Motor Specs:Magnets: neodymiumWatts: 2600 with Over 4200 Burst.Poles: 4Motor Shaft: 5mm with flat spotCan Measures: 40mm diameter x 92mm longWeight: 492 GramsMounting screw diameter required: 3mmBearing size: 5mm wide x 16mm od x 5mm idMounting Holes 25mm apart for use with most 540 mounts. Includes Leopard 6.0mm male bullet plugs soldered to the motor and a matching set for your esc connection. The Leopard Red anodized aluminum water cooling jacket is designed to allow water to come in direct contact with the motor and flow around it allowing maximum cooling.Installation is a snap!Apply some oil to both your motor housing and o-rings, then slide on the jacket. Water Cooling Jacket Specs:Outside diameter 47mm.Length 50mm Long. This product was added to our catalog on June 1, 2023
$149.99
Leopard LEO-5692, Leopard 5692, 730Kv Brushless Motor
Leopard LBP5692/3Y 730KV 4-Poles Inrunner Brushless Motor (1M-1.8M Boat)
$299.99
Maverick MVK28107, MSRS-249 2 in 1 Receiver/ESC 2.4GHZ, fits all Ion Models
MSRS-249 2 in 1 Receiver/ESC 2.4GHZ, fits all Ion Models "2 in 1" combined ESC and 2.4GHz Receiver unit for the Maverick iON range of cars.Features:WaterproofForward, Reverse & Brake Linear OperationAutomatic Setup SystemOver Current ProtectionThermal ProtectionLow Voltage ProtectionSpecification:Max Current: 20A Drive / 15A ReverseInput: 6.0-8.4VMotor Limit: 20 Turn 370 BrushedBEC: 6.0VCase dimensions: 35.1x25.3x14mmWeight: 7.4g with connectors and switch
$44.99
ProBoat PRB08029, Veles 29" Brushless Catamaran RTR
PRB08029, Veles 29" Brushless Catamaran RTR Product Details In The Box (1) Veles 29 Catamaran Boat (1) Spektrum™ DX2E 2.4GHz Transmitter (1) Spektrum SR310 DSMR 3-Channel Receiver (1) Dynamite® 120A Marine Brushless Marine 2-6S ESC (1) Dynamite Marine Brushless Motor, 2000Kv (1) Spektrum 3KG Plastic Gear Servo (1) User Manual Needed To Complete High-performance LiPo or NiMH battery (Dynamite 11.1V 5000mAh 3S 50C Reaction 2.0 Hardcase LiPo Battery: EC5, DYNB5035H5) LiPo or NiMH battery charger (Spektrum, S2100 AC Smart Charger, 2x100W) (4) AA batteries Features Hand-laid fiberglass composite hull Hand-laid fiberglass canopy Removable composite interior Powerful 2000Kv 6-pole marine motor Adjustable aluminum propeller strut Break-away rudder with water inlet New propeller design Spektrum™ DX2E 2.4GHz transmitter and receiver High-torque waterproof steering servo Water-cooled electronics Overview The Veles 29-inch Catamaran looks as good as it performs. It has much in common with the Blackjack 29, but has some new tricks up its sleeve-including an all-new hull and a 6-pole 2000Kv motor that is more efficient and powerful. On 4S Li-Po, the motor can propel the boat to 45+ miles per hour. With 6S power, this boat can hit speeds of 50+ miles per hour. The Veles 29 has an anodized, inline, adjustable propeller strut, offset rudder with water pick up, and stainless steel propeller. This boat is responsive and predictable, making it easy to drive. Whether this is your first RC watercraft or you've been driving boats for years, you'll love the speed, power and handling of this slick catamaran. Video Overview Hand-laid Fiberglass Composite Hull and Canopy Laid in three layers of fiberglass and hardened with high-strength resin, the hull and canopy are built to last! The hull's stiffness allows it to be more predictable-it deforms far less than heat-molded hulls and can withstand speeds in which most heat-molded hulls would fold. Fiberglass constructed hulls are built for performance just like the real boats you see racing offshore. Optimized Hull Design The new hull design features redesigned, stepped ride pads like real 1:1 catamarans. These steps give the boat a smoother ride along the water and ultimately provide more precise steering responses. The hull's design merges the best features of Pro Boat models such as the Miss Geico and Blackjack 29. The canopy has four thumbscrews that secure the hatch in case of crashes. Removable Injection-Molded Interior Thanks to the interior's composite material, there's no need for an inner wood structure. To remove the interior, simply unbolt it for servicing. Powerful 2000Kv 6-Pole Marine Motor This powerful 36x56 mm motor features the same Kv as the motors of our other 29-inch boats, but offers more speed on less voltage when paired with the new stainless steel propeller included with the boat. You no longer need to run 6S power to get 6S speeds. Adjustable Aluminum Propeller Strut The adjustable aluminum propeller strut lets you completely tune your boat for optimal performance in changing water and wind conditions. The flat bottom on the propeller strut acts like a trim tab and makes adjustments much more precise. With the new propeller strut, even small adjustments go a long way. Break-Away Rudder with Water Inlet The Veles uses a break-away rudder to safeguard the rudder and transom from floating objects or in the event the boat runs on shore. The water inlet helps cool the electronics even at low speeds and increases flow with forward momentum. Spektrum™ DX2E 2.4GHz Transmitter and Receiver The Spektrum DX2E 2.4 radio system and receiver with DSMR protocol provides precision and total control. The DX2E allows you to properly adjust your rudder travel. Other features include low-battery detection and failsafe. High-Torque Waterproof Steering Servo The high-torque steering servo offers peace of mind because the boat will stay in the direction you point it despite tricky water conditions. Product Specifications Approximate Assembly Time No assembly required Battery Sold Separately Beam 10.5 in (266mm) Charger Sold Separately Completion Level Ready-To-Run Drive System Flex Shaft Hull Height Catamaran Hull Material Fiberglass Motor Size 6-pole 2000Kv Motor Type Brushless Product Length 29 in (736mm) Product Weight 5.25 lbs (2380g) Propeller Size 1.7 x 1.6 (43 x 63.5mm) Radio Included Receiver Included Speed Control Included Steering Offset Rudder Trim Scheme Colors White and Silver Decals Type Catamaran
$519.99
ProBoat PRB08031V2T1, Pro Boat Jet Jam V2 12" Self-Righting Brushed RTR Pool Race Boat (Orange) w/2.4GHz Radio, Battery & Charger
PRB08031V2T1, Pro Boat Jet Jam V2 12" Self-Righting Brushed RTR Pool Race Boat (Orange) w/2.4GHz Radio, Battery & Charger The Pro Boat Jet Jam V2 12" Self-Righting Brushed Ready-to-Run Pool Race Boat is a great way to enjoy some safe boating fun, rain or shine. This boat features the use of a jet pump and has no exposed propeller. The high buoyancy allows the Jet Jam to operate in shallow waters (as little as three inches) or in deeper areas. The Jet Jam is also self-righting so you will never be stranded upside down! Hit the lake, pool, pond or any slow-moving water with the Pro Boat Jet Jam! Features: Self-righting Jet pump propulsion system Ready to run Decals included Run in rain or shine Includes 2.4GHz radio system Specifications: Length: 12" (305 mm) Beam: 4.5" (114 mm) Hull Height: 3" (76.2mm) Hull Material: Injection Molded ABS Motor Size: 390 Brushed motor Drive System: Jet Drive Weight: 1Lb (0.5Kg) Completion Level: Ready-To-Run Includes: (1) Jet Jam V2 12" Self-Righting Brushed RTR Pool Race Boat (1) 2 Channel Transmitter (1) 7.4V 1500mAh 2S LiIon Battery (1) USB Charger (1) Decal Sheet Set (1) Product Manual Needed to Complete: (4) AA Batteries for Transmitter This product was added to our catalog on September 19, 2022
$99.99
ProBoat PRB08032V2, Pro Boat Sonicwake 36" Self-Righting RTR Deep-V Brushless Boat w/Spektrum SLT3 2.4GHz Radio
PRB08032V2, Pro Boat Sonicwake 36" Self-Righting RTR Deep-V Brushless Boat w/Spektrum SLT3 2.4GHz Radio The Pro Boat Sonicwake 36" Self-Righting RTR Deep-V Brushless Boat is the perfect Deep-V for both beginners and avid boaters. It offers performance capable of hitting 50+ MPH and a worry-free self-righting feature that flips the boat back upright in a matter of seconds. The water-cooled 4-pole 1900Kv brushless motor invites you to go fast while the high torque, metal gear, and waterproof steering servo keeps you in control. It features improved dual water cooling, adjustable trim tabs, and larger turn fins. Features: Self-righting Hull Design Spektrum SLT3 2CH 2.4GHz DSMR Radio System Spektrum SR315 dual protocol receiver Spektrum 120a Marine ESC 4-pole Spektrum FIRMA 1900KV water-cooled brushless motor Sealed Canopy Large turn fins, adjustable trim tabs, and large propeller strut Aluminum Breakaway Offset Rudder Includes: (1) Sonicwake 36-inch Self-Righting Deep-V (1) Spektrum™ SLT3 3-Channel SLT Transmitter with SR315 Receiver (installed) (1) Spektrum™ 120A BL Marine ESC (installed) (1) Spektrum™ Firma™ 40x68mm 4-pole 1900Kv Motor (installed) (1) Boat Stand Needed to Complete: (2) 100C+ 2S-3S LiPo Batteries with IC5® or EC5™ Connector (1) Dual LiPo charger (4) AA Batteries This product was added to our catalog on March 17, 2021
$419.99
ProBoat PRB08034, Pro Boat Aerotrooper 25-inch Brushless Electric Airboat RTR
PRB08034, Pro Boat Aerotrooper 25-inch Brushless Electric Airboat RTR The Pro Boat Aerotrooper 25-inch Brushless Air Boat can be driven practically anywhere. Even on land! Featuring a 2080kv 480 Brushless outrunner motor with 3-blade airplane-style prop mounted above the hull, you can explore large bodies of water, plant-infested swamps, small grass fields, and even snow and ice. Keeping with the theme, a tactical/military hull scheme with removable guns, molded handrails, and cage add to the scale realism. Plus, the scale cockpit with seat and steering fits most action figures. Injection molded two-piece composite canopies are durable with a secure restraint system keeping all electronics safe during use. LED lights mean the fun doesn’t stop when the sun goes down. Features: Injection molded two-piece composite hull Injection molded composite canopies 2080kv 480 Brushless outrunner motor Dynamite 90 amp brushless ESC with Reverse Scale details LED Lights 1/10 scale metal gear waterproof 9KG servo Composite 3-Blade, molded, pusher propeller 2.4 Transmitter and waterproof receiver Specifications: Approximate Assembly Time: Less than 1 Hour Beam: 10.5 inches (266.7mm) Boat Type: Airboat Completion Level: Ready-To-Run Drive System: Pusher Prop Hull Height: 8.75 inches (222.3mm) Hull Material: Nylon composite Length: 25 inches (635mm) Motor Size: 480 Outrunner Propeller Size: 3 in. x 4 in., 3 blade pusher prop Radio: Spektrum STX2 2CH Radio Recommended Battery: 11.1V 5000mAh 3S 50C or 14.8V 5000mAh 4S 50C, EC3 Connector (not included) Scale: 25 inch Speed: 20 mph on water, 30 mph on land Speed Control: 90A BL Marine ESC 2-4 Steering: Rudder Trimscheme Colors: Black Weight: 3.9 lbs (1.8 kg) Includes: (1) Pro Boat® Aerotrooper™ 25-Inch Brushless RTR Air Boat (1) Spektrum STX2® 2CH Transmitter (1) Spektrum MRX200 2CH Receiver (1) Pro Boat® 90A Brushless Marine ESC (1) Spektrum 9kg Metal, Waterproof 23T Servo (1) Dynamite 2080KV Outrunner Motor (1) Product Manual Needed to Complete: 3S or 4S 5000mAh 50C Battery with EC3 Connector Appropriate LiPo Battery Charger Needle nose pliers (recommended) Paper towel (recommended) Rubbing alcohol (recommended) Phillips screwdriver: #1, #2 (recommended) Hex drivers: 1.5mm and 2mm (recommended) Clear tape (recommended) Marine grease and application gun (recommended) This product was added to our catalog on April 23, 2021
$249.99
ProBoat PRB08036, Horizon Harbor 30-Inch Tug Boat RTR
PRB08036, Horizon Harbor 30-Inch Tug Boat RTR Product Details The Pro Boat® Horizon Harbor Tug Boat is a scale-appearing boat allowing you to kick back and be the captain of your own ship or create the ultimate retrieval boat. Horizon Harbor 30-Inch Tug Boat RTR Manual - English Key Features Durable, Molded Hull Removable Retrieval Arms Operating Water Canon Ready Boat Stand Scale LED Lighting Needed to Complete (1) 11.1V 5000mAh 3S 50C Hardcase LiPo with EC5 Connector (1) Compatible LiPo Charger (4) AA Batteries Overview The Pro Boat® Horizon Harbor Tug Boat is a scale-appearing boat allowing you to kick back and be the captain of your own ship or create the ultimate retrieval boat. It's both a beautiful scale tug boat to cruise around your local pond and a ready-to-go-out-of-the-box retrieval boat for the seasoned racer. Featuring a 700 size motor and a 40 amp ESC capable of handling up to 3s LiPo, this boat can be enjoyed as a scale tug or you can use the removable arms to turn the tug into a working boat mover and retriever for up to 48-inch racing boats. Additionally, it has plumbing for dual water cannons which will become operational by adding a water pump which will be powered by the receiver. LED lights, a metal gear servo, 3 Channel 2.4Ghz radio, and receiver round out the package providing nighttime piloting with precise steering and crystal clear connection between the driver and the boat. Features Durable, Molded Hull Removable Retrieval Arms Scale Detail Operating Water Canon Ready 40 amp ESC Torque Servo 2.4Ghz Transmitter Boat Stand 700 Size Oversized Motor Scale LED Lighting Pre-Installed Ballast Video Overview Durable, Molded Hull One piece construction provides great strength. Molded composite material is much more impact resistant than fiberglass. Removable Retrieval Arms Turn the boat from a scale tug to a usable retrieval boat. Easy snap in installation with the ability to retrieve up to a 48-inch boat. Scale Detail Scale detail provides as much realism as possible. Tires, winch, crane, among other scale accessories on the deck finish out the details. Operating Pump Working water cannons plumbed and ready to accept a water pump add the ultimate realism to this boat. Operates on a third channel with its own controller. This allows you to turn on and off the water cannons with a push of a button. 700 Size Oversized Motor Powerful brushed motor provides more than enough torque to move large 48-inch gas powered boats. The large cooling heatsink provides plenty of cooling during those long pushes. 40 Amp ESC Able to handle more power than needed for a boat this size. Selectable between LiPo and NiMh chemistry. 2s - 3s compatible. High Torque Servo High torque servo provides all the necessary power to steer a 48-inch boat back to shore. Metal gears keep the gears from stripping as easy as nylon gears do. Waterproofing makes sure the servo is up to the task of being in a boat without the risk of failure do to getting wet. 2.4Ghz Transmitter 3 Channel FHSS 2.4 technology ensure crystal clear, interference free connection between the driver and boat. Boat Stand The sturdy wood construction works as a display or work stand. Foam protects the boat's finish and it can easily be stained to match any décor. Scale LED Lighting Provides navigation lights to help guide you on your rescue operations. Mast lighting provides that scale look and are easily seen from far away. Pre-Installed Ballast This ballast allows you to take the boat out of the box and place it in the water, without having to add a lot of weight to get it a proper waterline. Product Specifications Approximate Assembly Time No assembly required Beam 8.75 in (222mm) Completion Level Ready-To-Run Drive System Propeller Hull Height 10.5 in (266mm) Hull Material ABS Motor Size 700 Product Length 30 in (762mm) Product Weight 9.85lbs (4.5kg) Speed Control Included Steering Kort Nozzle
$449.99
ProBoat PRB08041, Pro Boat Recoil 2 26" Brushless Deep-V RTR Self-Righting RTR Boat (Heatwave/Shreddy) w/2.4GHz Radio System
PRB08041, Pro Boat Recoil 2 26" Brushless Deep-V RTR Self-Righting RTR Boat (Heatwave/Shreddy) w/2.4GHz Radio System The Pro Boat Recoil 2 26" BL Ready-to-Run Deep-V takes an already stout platform and brings it to the next level! With an upgraded motor and ESC combo the Recoil 2 boosts speeds past 35mph while still offering a stable platform for when things get rough. In the event that things get too wild the Recoil 2 offers a more advanced self-righting feature than ever before. The Recoil 2 motor features an integrated weight on the outrunner that eliminates the need for the weighted coupler, this is the key to self-righting. With just a single press of a button, your boat will flip upright after a wipeout. With a high output power system, unrivaled turning and a self righting hull the Recoil 2 offers everything you would want in a 26" platform. The Recoil 2 features liveries created and licensed by Heatwave and Shreddy (PRB08041T2). Now you can have the custom livery to match your apparel. Go for the Black and Gold classic look or go all-out wild with the Shreddy design inspired by Blake Wilkey. Features: High Impact ABS molded self-righting hull and canopy Spektrum™ 2300Kv Brushless Outrunner Marine Motor with integrated weight 100 Amp Spektrum™ Brushless ESC Two custom liveries by Heatwave Aluminum offset rudder and propeller strut Flex shaft-driven propeller Stainless steel hardware Durable Aluminum Propeller Horizon 4-Channel 2.4Ghz transmitter and receiver Pro Boat 5.3kg Waterproof Servo Floatation foam on canopy and hull Boat Stand Specifications: Beam: 7.96" (202 mm) Hull Height: 5.75" (146mm) Product Length: 26" (660 mm) Product Weight: 3.3lbs (without LiPo Battery) Propeller Size: 1.6 x 1.6 Drive System: Flex Shaft Hull Material: ABS Plastic Steering: Offset Rudder Motor Size: 4335 2300Kv Brushless Outrunner Speed Control: 100amp Spektrum Brushless Radio: Horizon 4-Channel 2.4ghz Completion Level: Ready-To-Run Needed to Complete: Nothing! Everything you need to have fun with the Recoil 2 26” RTR is included in the box! This product was added to our catalog on May 4, 2023
$369.99
ProBoat PRB08041V2, Pro Boat Recoil 2 V2 26" Brushless Deep-V Self-Righting RTR Boat w/2.4GHz Radio System & Smart ESC
PRB08041V2, Pro Boat Recoil 2 V2 26" Brushless Deep-V Self-Righting RTR Boat w/2.4GHz Radio System & Smart ESC The Recoil 2 V2 26" Brushless Deep-V Self-Righting RTR Boat gives you the proven performance you expect from a Pro Boat product with looks that will turn heads. Utilizing the self-righting Recoil 2 hull you can expect excellent overall performance on the water with the ability to flip back over in the event of an unfortunate crash. If it flips, just press the self-righting button on its custom programmed Spektrum SLT3 transmitter and you are back to carving up the water. Its V-hull design is a game-changer, allowing the Recoil 2 V2 to slice effortlessly through the water, ensuring a smooth and stable ride, even in the most challenging conditions. At the heart of this powerhouse is the included brushless power system, featuring the Spektrum 2300Kv Brushless Outrunner Marine Motor, paired with a 100A Spektrum Brushless ESC. Together, they generate an impressive 35+ mph of wake-inducing action, leaving others in awe of your boat's speed and agility. One standout feature of the motor is its integrated weight on the outrunner, making weighted couplers a thing of the past. With this ingenious design, the Recoil 2 V2 boasts self-righting capabilities like no other. Gone are the worries of a sudden wipeout on the lake – simply press the self-righting button on the custom programmed Spektrum SLT3 radio transmitter, and your boat flips back upright, ready for more action. This cutting-edge innovation is exclusive to the Recoil 2 V2, setting it apart from all other boats in the market. For newcomers to the hobby, the Smart 3S 3200mAh battery and S120 USB Smart Charger are perfect choices. The versatile charger can utilize any USB port for power, making it a breeze to keep your boat juiced up and ready to go. Even a boat stand and AA transmitter batteries are included, providing a hassle-free setup and ensuring you're good to go straight out of the box. With customizable Heat Wave Visual or Shreddy liveries, the 26-inch Pro Boat Recoil 2 V2 Deep-V boat isn't just about performance, it's a statement of style! Whether you're a seasoned RC boating enthusiast or just getting started, this ready-to-run masterpiece makes it easier than ever to conquer the lake and leave a trail of excitement in your wake. So buckle up and brace yourself for unparalleled fun and adventure on the water with the Recoil 2 V2! Features: High-impact ABS molded self-righting hull and canopy Custom-programmed Spektrum SLT3 3-channel 2.4GHz transmitter and receiver Spektrum 2300Kv Brushless Outrunner Marine Motor with integrated weight 100A Spektrum Brushless ESC Two custom liveries by Shreddy and Heat Wave Visual Specifications: Hull Type: V-Hull Beam (Width): 7.96" (202mm) Hull Height: 5.75" (146mm) Length: 26" (660mm) Weight: 3.3lbs (1.5kg) without LiPo Battery Motor Type: Brushless Propeller Size: 1.6x1.6 Motor Size: 4335-2300Kv Includes: (1) Recoil 2 V2 26" Self-Righting Brushless RTR (1) Spektrum 3S 3200mAh 30C LiPo Battery (1) Spektrum S120 Battery Charger (1) Spektrum Firma 4335-2300Kv Brushless Outrunner Motor (installed) (1) 100 Amp Spektrum Brushless ESC (1) Spektrum SLT3 3-channel 2.4GHz transmitter and receiver (1) Pro Boat 5.3kg Waterproof Servo (1) Recoil 2 V2 Instruction Manual (1) Composite Boat Stand (4) AA Batteries Needed to Complete: Nothing! Everything you need to have fun with the Recoil 2 V2 26” RTR is included in the box! This product was added to our catalog on August 28, 2023
$369.99
ProBoat PRB08045, Pro Boat Sprintjet 9 Inch Self-Righting RTR Electric Jet Boat w/2.4GHz Radio, Battery & Charger
PRB08045, Pro Boat Sprintjet 9 Inch Self-Righting RTR Electric Jet Boat w/2.4GHz Radio, Battery & Charger The Pro Boat Sprintjet 9-inch Self-Righting Jet boat Deep-V is summertime excitement in a size you can take anywhere. The powerful motor, dynamic jet pump, and 600Mah LiPo battery with 9-12 minutes of run-time provide all you need to slice through the surface of your backyard pool or nearby lake. Plus, the 2.4GHz radio system offers an interference-free, proven connection and the self-righting hull adds security and builds confidence. This jet boat has all the performance you're looking for in an attractive package. Just charge the battery and get to the water! Features: Self-righting hull design Jet pump performance 9 inch hull length for optimal flexibility of use Powerful performance with a potent 390-size brushed motor Injection molded plastic hull offers crisp lines 2.4Ghz Horizon radio system Dynamite® 7.4V 600mAh LiPo battery and USB Smart charger Waterproof steering servo Specifications: Length: 9" (228.6mm) Beam: 3.625" (92.07mm) Motor Size: 390 brushed Weight: 0.5lbs (0.2268kg) Radio: Pro Boat 2.4 Ghz Speed Control: 3 in 1 ESC/RX Hull Material: Injection molded ABS Hull Type: Deep V, 2" (50.8mm) Height Battery: 7.4V 600mAh 2S 20C LiPo with JST connector (included) Kit/RTR: RTR Drive System: Jet pump Assembly Required: No Includes: (1) Sprintjet 9-inch Self-Righting Jet Boat with (1) 600mAh LiPo battery (installed) (1) Pro Boat™ 2.4 Ghz Transmitter (1) S120 USB-C Smart Charger (1) USB-C to USB Cable (1) Product Manual This product was added to our catalog on July 31, 2021
$99.99
ProBoat PRB08046, Pro Boat PCF Mark I 24" Swift Patrol Craft RTR Boat w/2.4GHz Radio
PRB08046, Pro Boat PCF Mark I 24" Swift Patrol Craft RTR Boat w/2.4GHz Radio The Pro Boat PCF Mark I 24" Swift Patrol Craft RTR Boat is a faithful recreation of the Vietnam era patrol vessel. Using a molded ABS hull with a .50 caliber gun on the bow, M60 machine guns, a .50mm gun on the transom, life rings, docking tires, light pods, antennas, rail chains, and a flag this boat features incredible scale details. Additionally if you're looking to take the accuracy to the next level, this boat comes ready to upgrade with an optional rotating machine gun turret. The Pro Boat PCF Mark I is more than just a display piece. With two 390 brushed motors with aluminum heatsinks, this boat has the muscle to move easily at scale speeds and maneuver with finesse. The included Spektrum SLT3 radio and 40-amp ESC/RX 2-in-1 provide dependable control of the on-board electronics, including the boat's LED lights which can be operated right from the transmitter. Expertly painted and finished with an accurate military trim scheme, the Pro Boat PCF Mark I is ready to run right out of the box. Simply add your choice of 3S LiPo battery and charger and you'll be ready to patrol the waters of your local lake or pond in style. Whether you're a history buff, a veteran, or just an RC boat enthusiast, the Pro Boat PCF Mark I is sure to impress. Don't miss your chance to own this stunning replica and pay tribute to the heroes who served on these incredible vessels. Features: Incredible scale realism High-quality Spektrum electronics Dual 390 brushed motors Realistic submerged propulsion and rudder systems Highly detailed ABS hull Specifications: Beam: 7" (178mm) Hull Height: 8.12" (206mm) Length: 24" (610mm) Weight: 3.15lbs. (1.43kg) Propeller Size: 1.2x1.6" Motor: Twin 390 Brushed Recommended Motor Battery: 11.1V 2200mAh 3S 30C LiPo Battery with IC3 or EC3 Connector Includes: (1) PCF Mark I 24" Swift Patrol Craft RTR (1) Spektrum SLT3 3-Channel Transmitter (1) Spektrum SLT 25a Brushed Marine ESC/RX (1) Dual 390 Brushed Motors (1) Boat Stand (4) AA Transmitter Batteries (1) Product Manual Needed to Complete: (1) 11.1V 2200mAh 3S 30C LiPo Battery with IC3 or EC3 Connector (1) Compatible Battery Charger This product was added to our catalog on May 4, 2023
$329.99
ProBoat PRB08051, Pro Boat 1/6 24" Jetstream Brushless Jet Boat RTR
PRB08051, Pro Boat 1/6 24" Jetstream Brushless Jet Boat RTR w/2.4GHz Radio The Pro Boat 1/6 scale Jetstream RTR is a groundbreaking RC jet boat that mirrors the excitement of its full-size counterparts. Embodying the spirit of boundless adventure, just like real jet boating, this model empowers you to explore without limits and revel in the exhilaration of conquering every challenge. Pioneering the realm of RC boat bashing, the Jetstream is engineered for unforgiving conditions. It craves the tumultuous waters, whether they're a mere two inches or a vast two hundred feet deep. From turbulent whitewater to meandering streams, and even daring jumps, this is your passport to limitless thrills. Experience the ultimate in RC boating, and seize the unrivaled excitement of the Jetstream, the unrivaled titan of the RC boat realm. From bow to stern, the 24-inch Jetstream stands as the ultimate challenger in the realm of RC boats. Highlighting its prowess, the jet pump propulsion system boasts a reversible gate, not only for trailer dismounting but also for swift water braking. This feature, among others, impeccably captures the scale and authenticity of a full-sized boat. Fueled by a high-performance, water-cooled brushless system, the Jetstream conquers vast streams with finesse and offers aggressive maneuverability. Crafted to withstand vigorous play, its design encompasses a robust ABS hull with armored-plated undersides and a replaceable stainless steel wear ring for the jet pump. Plus, the SSL (Strap/Slide/Lock) battery swap system minimizes downtime, ensuring a swift return to action. Features: High-performance, water-cooled brushless system Powerful jet pump with adjustable nozzle trim full length stern ride plate with adjustable trim tabs Durable composite impeller and intake grate Reverse gate for realistic maneuvering Stainless steel wear ring for extreme durability SSL (Strap/Slide/Lock) quick battery swap system Sturdy, rigid ABS main hull with armor-plated underside Rust-resistant stainless steel hardware Officially licensed liveries Specifications: Hull Type: V-Hull Beam (Width): 12.6" (320mm) Hull Height: 8.9" (225mm) Length: 24" (610mm) Weight: 7lbs (3.1kg) Motor Type: Brushless Motor Size: 4068-1600Kv Includes: (1) 24" Jetstream Electric Jet Boat RTR Needed to Complete: (1) 14.8V 4S 50C 5000mAh with EC5 or IC5 Connector Compatible Charger for battery This product was added to our catalog on September 14, 2023
$549.99
ProBoat PRB281074, Canopy Black: Sonicwake 36
Canopy Black: Sonicwake 36
$53.99
ProBoat PRB281127, Hull, Black: Sonicwake 36 V2
Hull, Black: Sonicwake 36 V2
$149.99
ProBoat PRB380001, Water Canon Pump Set Tug 30
PRB380001, Water Canon Pump Set Tug 30
$49.99
ProBoat Pro Boat Blackjack 42" 8S Brushless RTR Electric Catamaran w/2.4GHz Radio System
Pro Boat Blackjack 42" 8S Brushless RTR Electric Catamaran w/2.4GHz Radio System The Pro Boat Blackjack 42" 8S Brushless RTR Electric Catamaran is a return to the days of large-scale racing boats taking on all comers with style and speed. The 8S-rated Spektrum 160A High Voltage, water-cooled, Smart electronic speed controller works tirelessly to power the Spektrum Marine 4685 4 Pole, water-cooled motor which is capable of producing up to 5.3 horsepower and hitting 55+ MPH! There is no other boat in this size, with this much power, at such an affordable value. Of course, everything is controlled by the Spektrum Smart System making this speed demon incredibly intelligent. A Spektrum DX3 Transmitter and waterproof SR6110AT 6-Channel Telemetry Receiver keeps everything tightly connected for an interference free operation with built-in telemetry. The Blackjack also features an impact resistant polycarbonate hull, polycarbonate canopy with aluminum thumb screws, a clean molded composite interior, and an aluminum rudder and propeller strut. Lay your cards on the table and make the lake your own with the Pro Boat Blackjack 42 Catamaran. Features: Impact Resistant Polycarbonate Hull Polycarbonate Canopy with Aluminum Thumb Screws Spektrum™ Marine 4685 4 Pole, Water-cooled Motor Spektrum™ Smart 160A High Voltage, Water-cooled ESC Clean Molded Composite Interior Aluminum Propeller Strut Aluminum Rudder Spektrum™ DX3™ Transmitter Spektrum™ SR6110AT 6-Channel Telemetry Receiver Spektrum™ S904 1/6 Scale WP Digital Servo Specifications: Approximate Assembly Time: Less than 1 hour Battery: Sold Separately Beam: 15.25" (387 mm) Charger: Sold Separately Completion Level: Ready-To-Run Drive System: 2-Blade Propeller - Flex Shaft Hull Height: 7.25in (184.15 mm) Hull Material: 2.5mm Polycarbonate, Reinforced With a Full Molded Interior Motor Size: 4985 1350Kv Brushless Water-cooled Motor Type: Brushless Product Length: 42.75" (1086 mm) Product Weight: 8.95lbs (4.1kg) Propeller Size: 1.7 X 1.6in - 5mm Shaft Radio: Included Receiver: Included Recommended Motor Battery: (2) 4S 5000mAh 50C+ Batteries with IC5 or EC5 Connectors Speed: 55mph+ Speed Control: Included Steering: Aluminum Single Rudder System Trim Scheme Colors: Black / Orange or White / Red Includes: (1) Pro Boat® Blackjack™ 42 Brushless 8S Catamaran Boat (1) Spektrum™ Marine 4685 4 Pole, Water-cooled Motor (installed) (1) Spektrum™ Smart 160A High Voltage, Water-cooled ESC (installed) (1) Spektrum™ S904 1/6 Scale WP Digital Servo (installed) (1) Spektrum™ SR6110AT 6-Channel Telemetry Receiver (installed) (1) Spektrum™ DX3 Transmitter (1) Boat Stand (1) Product Manual Needed to Complete: (2) 4S 5000mAh 50C+ Batteries with IC5 Connectors (1) 4S Capable LiPo Charger (1) LiPo Safe Charging Bag This product was added to our catalog on June 3, 2021
$649.99
ProBoat Pro Boat, Stealthwake 23" Brushed Deep-V RTR, PRB08015
Features Streamlined Deep-V hull made from durable ABS plastic Pro Boat® 2.4GHz marine radio system for extended range and interference-free operation Boat stand included Dynamite® 7.2V 2400mAh NiMH Dynamite® battery and charger included Whiplash inducing trim scheme and design 60A Li-Po ready ESC Impressive, water-cooled 550 size motor Waterproof electronics Overview Key Features Impressive, water-cooled 550 size motor Dynamite® 7.2V 2400mAh NiMH Dynamite® battery and charger included Pro Boat® 2.4GHz marine radio system for extended range and interference-free operation Streamlined Deep-V hull made from durable ABS plastic Boat stand included 60A Li-Po ready ESC Whiplash inducing trim scheme and design Waterproof electronics Video Overview Stealthwake Addendum – Multilingual Stealthwake Manual – Multilingual
$199.99
RaCersEdge™ RaCersEdge Fierce™, Custom 31" Mono Electric RC Speed/Racing Boat
Custom High-Performance Electric RC Boat Waterproof Electronics Product Specifications Engine: Electric Power System: Hull: Electric Mono - Part Number: 31EMhw Length: 31" What's in the Box? RaCersEdge Fierce™ Electric Speed/Racing Boat Needed To Complete: Transmitter System: FUTABA 3PV - R304SB (#01004347-3) - Transmitter Systems, Surface Systems - Part Number: 01004347-3 Battery Options Spektrum, SPMX56S100, 22.2V 5000mAh 6S 100C Smart G2 LiPo Battery: IC5 Spektrum, SPMX54S100H5, Spektrum G2, 5000mAh 4S 14.8V Smart G2 LiPo 100C; IC5 Spektrum, S2200 G2 AC 2x200W Smart Charger, SPMXC2010 Options: SkyRC GNSS Performance Analyzer XBC100 SMART Battery Checker & Servo Driver
$1,199.00
RaCersEdge™ RaCersEdge Infuriator II™, Custom 48" Catamaran TWIN Electric RC Speed/Racing Boat
Custom High-Performance "TWIN SCREW" Electric RC Boat Waterproof Electronics Product Specifications 1 Electric (Leopard 5692, 730Kv Brushless Motors) 1 Electronic Speed Control Units: (ZTW Seal Series ESC: 300A OPTO 6s-14s) Motor Options: (Price+/-) 1 Electric (Leopard 5692, 730Kv Brushless Motors) 2 Electric (Leopard 5692, 730Kv Brushless Motors) 2 Electric (Leopard 4082X2, 2200Kv X2 1.5Y Brushless Motor) 2 Electronic Speed Control Units: (ZTW Seal Series ESC: 300A OPTO 6s-14s) Power System: Electric Hull: Catamaran - Part Number: 48Chw Length: 48" Width: 15" Speed: 80MPH+ Weight: 8 lbs. What's in the Box? RaCersEdge Infuriator™, Custom 48" Catamaran TWIN Electric RC Speed/Racing Boat Needed To Complete: Transmitter System: FUTABA 3PV - R304SB (#01004347-3) - Transmitter Systems, Surface Systems - Part Number: 01004347-3 Battery Options Spektrum, SPMX56S100, 22.2V 5000mAh 6S 100C Smart G2 LiPo Battery: IC5 Spektrum, SPMX54S100H5, Spektrum G2, 5000mAh 4S 14.8V Smart G2 LiPo 100C; IC5 Spektrum, S2200 G2 AC 2x200W Smart Charger, SPMXC2010 Options: SkyRC GNSS Performance Analyzer Seal Series: Program Card for Seal ESCs XBC100 SMART Battery Checker & Servo Driver
$2,699.00
RaCersEdge™ RaCersEdge Infuriator™, Custom 48" Catamaran Electric RC Speed/Racing Boat
Custom High-Performance Electric RC Boat Waterproof Electronics Product Specifications Engine: Electric (Leopard 5692, 730Kv Brushless Motor) Electronic Speed Control: (ZTW Seal Series ESC: 300A OPTO 6s-14s) Power System: Hull: Catamaran - Part Number: 48Chw Length: 48" Width: 15" Speed: 60MPH+ Weight: 8 lbs. What's in the Box? RaCersEdge Infuriator™, Custom 48" Electric RC Speed/Racing Boat Needed To Complete: Transmitter System: FUTABA 3PV - R304SB (#01004347-3) - Transmitter Systems, Surface Systems - Part Number: 01004347-3 Spektrum, S2200 G2 AC 2x200W Smart Charger, SPMXC2010 Options: SkyRC GNSS Performance Analyzer Seal Series: Program Card for Seal ESCs XBC100 SMART Battery Checker & Servo Driver
$2,599.00
RaCersEdge™ RaCersEdge Relentless™, Custom 48" Offshore Mono Electric RC Speed/Racing Boat
The RaCersEdge Relentless™, Custom 48" Offshore Mono Electric RC Speed/Racing Boat is propelled by brushless power that will have you flying across the water at adrenaline-pumping speeds of over 75+MPH! Performance is delivered by a brushless, water-cooled 730Kv motor, and harnessed by a 300A water-cooled electronic speed control. This offshore Speed/Racing Boat features a durable uni-body fiberglass hull that arrives with bright, bold graphics that give the Relentless™ a fast, aggressive appearance. The durable propeller, aluminum rudder, and stainless running hardware provide a rugged, yet elegant look that completes the package, making the Relentless™ a great looking, high-performance boat that looks as fast on the included display stand as it does on the water.The RaCersEdge Relentless™ arrives 100% assembled out of the box. Custom High-Performance Electric RC Boat Waterproof Electronics Product Specifications Engine: Electric (Leopard 5692, 730Kv Brushless Motor) Electronic Speed Control: (ZTW Seal Series ESC: 300A OPTO 6s-14s) Hull: Offshore Mono - Part Number: 48OMhw Length: 48" What's in the Box? RaCersEdge Relentless™, Custom 48" Electric RC Speed/Racing Boat Needed To Complete: Transmitter System: FUTABA 3PV - R304SB (#01004347-3) - Transmitter Systems, Surface Systems - Part Number: 01004347-3 Battery Options Spektrum, SPMX56S100, 22.2V 5000mAh 6S 100C Smart G2 LiPo Battery: IC5 Spektrum, SPMX54S100H5, Spektrum G2, 5000mAh 4S 14.8V Smart G2 LiPo 100C; IC5 Spektrum, S2200 G2 AC 2x200W Smart Charger, SPMXC2010 Options: SkyRC GNSS Performance Analyzer Seal Series: Program Card for Seal ESCs XBC100 SMART Battery Checker & Servo Driver
$2,699.00
Rage RC RGRB1219, Propellers (3): Black Marlin / BM Brushless
RGRB1219, Propellers (3): Black Marlin / BM Brushless
$6.99
Rage RC RGRB1220, 390A Brushed Motor; Black Marlin, Black Marlin EX
390A Brushed Motor; Black Marlin, Black Marlin EX
$9.99
Rage RC RGRB1223B, 2.4GHz Receiver/ESC Unit with Reverse; Black Marlin, BM EX
2.4GHz Receiver/ESC Unit with Reverse; Black Marlin, BM EX
$19.99
Rage RC RGRB1423, Propellers (3); Black Marlin EX Brushless
RGRB1423, Propellers (3); Black Marlin EX Brushless
$4.99
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"