T-Motor's M0703 19000Kv Micro Motor is a great size, rated at 0703, combining incredible power and unmatched reliability. You'll experience total authority with input control and feel the confidence that comes with T-Motor's superior technology. The T-Motor M0703 19000Kv motor has a rated voltage of 1S and weighs 1.7g, making it perfect for your 65MM Whoop racing drone. Fly with confidence - get your M0703 19000Kv Micro Motor today.
Check out our vast motor selection and all our T-Motor products!
Specifications
KV: 19000
Stator Diameter: 7mm
Stator Height: 3mm
Shaft Diameter: 1mm
Mounting Pattern: 6.6mm x 3
Weight: 1.7g (Including Cable)
Rated Voltage: 1S
Max. Power (10s): 7.5W
Configuration: 9N12P
Lead: JST-1.25 40mm
Idle Current(10v): 0.5A
Peak Current(10s) 2.03A
Includes
1x T-Motor M0703 19000Kv Micro Motor
1x Spare Parts Bag
The tiniest T-motors! All the quality and style you expect from a T-Motor, Super clean black and blue bell design for your 1S whoop drones! These motors are equipped with JST-1.25 plugs on 33mm of motor wire. Grab yourself a set of these super fast and nimble 0802 motors!!
Check out all our motors and all our T-Motor products!
Specifications
Kv: 25000Kv
Input Voltage: 1S
Configuration: 9N12P
Max Continuous Current: 4.82AInternal Resistance: 180mΩ
Motor Dimensions: Φ10.6x14.7mm
Stator Dimensions: Φ8x2mm
Shaft Diameter: 1mm
Mounting Pattern: Φ6mm, 3x M1.4
Wire Dimensions: JST-1.25, 33.5mm
Weight: 1.93g (w/ wire)
Includes
1x T-Motor M0802 25000Kv Micro Motor
T-Motor's M1002 18000Kv Micro Brushless Motor is an 1002 sized motor that pushes the boundaries of micro motor technology. Offering incredible power, plus durability & reliability that which comes with the reputation of T-Motor motors. With power, comes authority with your inputs, hence you should expect a sense of excellent control with these motors. Grab this motor so you can fly with confidence.
Check out our vast motor selection and all our T-Motor products!
Specifications
KV: 18000
Stator Size: 10x2mm
Shaft Diameter: 1.5mm
Idle Current: 0.6A
Max Power: 18.7W
Peak Current: 5.16A
Configuration: 9N12P
Rated Voltage (Lipo): 1S
Weight: 2.4g
Connector: JST-1.25 40mm
Includes
1x T-Motor M1002 1002 18000Kv Micro Brushless Motor
1x Spare Parts Bag
All batteries must be shipped by a ground shipping method.
The Tattu 300mAh 3.8V 75C 1S1P LiPo Battery Pack with BT2.0 or PH2.0 plug is the best battery choice for micro quads. This lipo comes with a 75C discharge rate, and a high burst rate, making indoor racing much more fun! The Tattu tiny battery is made of the best materials in the liPo industry. And it is stable, safe, and powerful.
Be sure to select the connectors right for your setup!
Check out our other 1S packs and all our Tattu products!
Features
High-quality, reliable power
Very high C rating. Designed for professional FPV racing
Specifications
Capacity: 300mAh
Continuous Discharge Rate: 75C
Max Burst Discharge Rate: 150C
Discharge Connector: BT2.0 or PH2.0
Dimensions: 68x12x6mm
Weight: 8.1g
Includes
1x Tattu 3.8V 1S 300mAh 75C LiHV Battery 5 Pack
All batteries must be shipped by a ground shipping method.
The 500mAh 3.7V 95C 1S Lipo Battery comes in a very lightweight and very compact size. The long shape of this battery makes it works best on small drones. Tattu batteries are specifically made for UAV/FPV/drone market. It is coming in a lighter weight, smaller size simpler design but more flight time and more enjoyment.
Check out all our 1S LiPos, and all out Tattu products!
Features
Remarkable stacking technology enables single-cell capacities of 500mAh.
High discharge performance and high energy density.
Superior Japan and Korea Lithium Polymer raw materials.
Tattu batteries provide high quality, reliable power for your small drones.
Local after-sales service (located in Dublin, CA)
Specifications
Minimum Capacity: 500mAh
Configuration: 1S1P / 3.7V / 1 Cell
Discharge Rate: 95C
Max Burst Discharge Rate: 190C
Net Weight(±20g): 14g
Dimensions: 58mm Length x 18mm Width x 8mm Height
Discharge Plug: JST-PHR-2P (PH2.0 Compatible)
Includes
1x Tattu R-Line 1S 3.7V 500mAh 95C LiPo Whoop/Micro Battery - PH2.0
Note: Use 5v Regulator on FC/ESC for 1s operation. It draws only 60mA per led board, so it will not be a lot. Most FCs will have enough overhead to power 1-2 LEDs
The TinysLEDs Lil' Lites 1-3S Micro LED is the perfect choice for your next project. Featuring a small form factor and the ability to choose from 8 different colors, you can find the perfect LED to suit your needs.
Don't forget to check out our other LEDs and TinysLEDs selection!
Specifications
Current Draw: 60mA
Dimensions: 15.9mm x 3.99mm
Weight: 0.19 grams each
Contains: 1 LED
Includes
1x TinysLEDs Lil' Lites 1-3S Micro LED (1pc) - Choose Your Color
TRA6637, Traxxas LaTrax Alias LiPo Battery (3.7V/650mAh)
This is a replacement LaTrax 3.7V 650mAh 1C LiPo battery pack for use on the La Trax Alias quad-copter.
Specifications:
Length: 2.08" (53mm)
Width: 1.18" (30mm)
Thickness: 0.23" (6mm)
This product was added to our catalog on September 7, 2021
Storage discharge your 1S Lipo battery safely; no more puffing! Ready to fly your 1S little rippers but bad weather or something else ruins your plans? Leaving all your 1S batteries fully charged, which will cause puffing. This 1S discharger is a great way to avoid this. It stops discharging completely when done, so you can be sure your 1S batteries are safe. Easy to use - just plug the 1S battery in and the red LED will light up. Once the discharging is complete, the LED will turn off. If the LED doesn't turn on, press the button to switch the discharger to working mode.
Check out our other tools and building supplies and all the TuneRC Products we carry.
Safe and Easy to Use
The discharger will stop discharging completely once the discharging is done. The discharger is also very easy to use. You just need to plug in the 1S battery and the red led should be on, which indicates the discharger is working. The red led indicator will be off once the discharging is completed. FYI: Please press the button on the discharger to put the discharger in working mode if the red LED indicator doesn’t turn on after the 1S battery is plugged in.
Specifications
Plug Type: PH2.0 Connector
Discharge Current: Max. 100mA
Cut-off Voltage: 3.83 -0% +2%
Size: 10mm x 38mm
Weight: 1.7g
Includes
1x TuneRC 1S - Safe Lipo Battery Discharger - PH2.0
The UltraPower UP-S6 employs a circuit that features 6 totally independent but identical power outputs which are powered 4.35W each. It's designed for charging single cell Lipo and LiHV. Insert the battery lead to the right connectors at each port. The charger can charge up to 6 batteries at the same time. The charging current can be adjustable from 0.1-1.0A and also supports 5V, 2.1A USB charging for phones, tablets, or other USB chargers. The charging status and voltage are displayed on digital segment LED indicators.
Check out our other 1S Battery Chargers and Accessories!
Features
Six independent ports can be used at the same time
Three different kinds of battery connectors in each port
Six independent charging circuits
LED and audible sound indicate charging status
Adjustable charging current from 0.1-1.0A
USB port (5V/2.1A) for charging iPad, mobile phones, digital cameras, etc.
Maximum protection: battery reverse polarity protection, battery overvoltage protection, and DC input voltage protection
Specifications
Item name: Ultra Power UP-S6 6 channels intelligent fast charger
DC input voltage: 9.0V-15.0V - Barrel Connector is 2.5mm
Charge power: Max. 4.35W x6, ±10%
Charge current: (0.1-1.0A) x6, ±10%
Battery type: LiPo/LiHV
Battery cell count: 1cell
Indication: LED light
Support battery port: Micro, MX, mCPX
Support USB charge port: 5V/2.1A
Product weight: 66g
Dimension: About 100 * 50 * 22mm
Includes
1x Ultra Power UP-S6 1S LiPo/LiHV 6 Channel DC Whoop Charger
This is the new V3 version! ViFly's new 1S whoop battery charger supports both PH2.0 & BT2.0 to keep you in the air no matter which connectors you have. VIFLY WhoopStor 3 is the first 1S LiPo charger with a storage function. It includes both charging and discharging functions. Just select your target voltage, it will do it for you automatically.
Pick between Black, Red, and White for your charger!
Check out our other 1S Battery Chargers and Accessories and our other ViFly products!
Features
[Storage Charger and Discharger] VIFLY WhoopStor 3 is the first 1S LiPo charger with storage function. It includes both charging and discharging functions. Just select your target voltage, it will do it for you automatically.
[Colorful LCD Screen, Intuitive Interface] VIFLY WhoopStor 3 installs high quality LCD screen, the charging status is displayed clearly and the intuitive interface makes the operation very simple.
[Fast Charge Speed] The charge current range is from 0.3A to 1.3A, you can choose different charge current for different size batteries, it is better to charge the battery with 2C rate.
[6 Independent Ports] 6 independent charging channels, not necessary to ensure the batteries are all the same voltage and same size. You also can unplug one that's done and plug in another while the others are still charging.
[Multiple Power Input] It supports Type-C, XT60 and DC power input. Type-C used PD and QC protocol that supports fast charge at 9V and 12V, but it not supports regular 5V USB charge.
[Memory Function] VIFLY WhoopStor 3 added the memory feature of remembering last time settings, no need to set the charge current every time you turn it on.
[Buzzer Indication] VIFLY WhoopStor 3 added the buzzer to beep when one charging circle finished, if you don’t like beeping, you can turn the buzzer off manually.
Specifications
Input connector: XT60, DC(5.5x2.1mm), USB-C(PD3.0)
Input voltage range: 6V-26V (XT60 2S-6S Battery, DC), 9V-20V (USB-C)
Max input power: 40W
Max charging current: 1.3A/port
Battery Connection: PH2.0 & BT2.0
Battery type: LiPO 4.20V(±0.05V) / LiHV 4.35V (±0.05V)
Storage voltage: 3.80V (±0.05V) / 3.85V (±0.05V)
Max discharge power: 1.1W/port
Dimensions: 108x55x30mm
Includes
1x ViFly WhoopStor V3 1S LiPo/LiHV 6 Channel DC/USB-C Battery Charger & Discharger for BT2.0 & PH2.0
The Walksnail Avatar HD Nano Camera / Mini 1S VTX Kit features a nano digital camera, antenna, and mini VTX that works with HD Goggles such as the Walksnail Avatar and Fat Shark HD Dominator. This mini HD VTX combo has lower latency than the competitor at an average of 22ms, with an onboard DVR, 5.8GHz frequency, 8Gb internal storage, and a switchable aspect ratio.
Check out all our Walksnail HD products!
Features
Lower latency than the competitor at an average of 22ms
6.8g Lightweight Mini VTX great for the 75x Quad
Walksnail Avatar Mini 1S VTX Module
Walksnail Avatar Nano Camera
Built-in 8Gb Internal Storage
1080p Screen Resolution
Switchable Aspect Ratio
Walksnail IPEX Antenna
5.8GHz Frequency
Onboard DVR
Canvas Mode
170° FOV
3.1V-5V
Specifications
AVATAR HD NANO CAMERA
Resolution: 1080p 60FPS / 720P 120FPS / 720P 60FPS
Aspect Ration: 16/9 and 4/3 Switchable
Minimum Illumination: 0.001Lux
Shutter Style: Rolling Shutter
Dimensions: 14x14x17mm
Cable Length: 90mm
Image Sensor: 1/27"
Field Of View: 170°
Aperture: F 2.0
Lens: 2.1mm
Weight: 3.5g
AVATAR MINI 1S VTX MODULE
Transition Power: FCC<25.5dBm / CE <14dBm / SRRC <20dBm / MIC <25dB
I/O Interface: JST1.0 x 6 (Power In) to JST1.0 x 4 (USB)
Operational Frequency: 5.725-5.850GHz
Operating Temperature: -20° to 40°c
Supported FC Firmware: Betaflight
Video Resolution: 1080p / 720p
Dimensions: 33x33x6.5mm
Antenna Connector: IPEX
Bitrate: 25mbps/50mbps
Mounting: 25.5x25.5mm
Latency: 22ms Average
Internal Storage: 8GB
Input Voltage: 3.1-5V
OSD: Canvas Mode
Weight: 6.8g
Channels: 8
WALKSNAIL AVATAR VTX ANTENNA
Radiation Efficiency: >= 98%
Bandwidth: 5.6-5.9GHz
Gain: 2dBi Average
Polarization: LHCP
Connector: IPEX
Length: 90mm
VSWR: <=1.4
Weight: 1.5g
Includes
1x Walksnail Avatar HD Nano Camera w/ Avatar Mini 1S VTX
1x 6-Pin Power Cable
2x M2 4mm Screws
1x 4-Pin USB Cable
The Walksnail Avatar HD Nano Camera V3 / Avatar HD Mini VTX V3 features a nano digital camera, antenna, and mini VTX that works with HD goggles such as the Walksnail Avatar and Fat Shark HD Dominator. The Avatar V3 is the upgraded version of the Avatar 1S, where the V3 improves with 32G of storage, 500mW of power, a native 4:3 sensor, and a wide voltage range of 3.1-13V.
Check out all our Walksnail HD products and check out all our Walksnail compatible products!
Features
3.1~13V
500mW
FOV160°
Metal case
1080P/60fps
4:3 native sensor
Built-in 32G storage
18.5g light-weight
Nano Camera 14x14mm
Walksnail Avatar HD Nano Kit V3
The Walksnail Avatar HD Nano Kit V3 supports 1080P/60fps, with a 4:3 native sensor that provides smooth and stunning images. With this kit, you can capture flying footage with exceptional clarity and detail.
Walksnail Avatar HD Nano Kit V3 is suitable for more drones, with 3.1-13V voltage input and 500mw power output, you'll be able to fly various kinds of drones with amazing video quality and range.
Nano camera V3 with dimensions of 14*14cm and a weight of only 3g, equipped with a 2.1mm lens and 160° FOV, provides clearer and more realistic image quality.
The Avatar VTX comes with 32g built-in storage, it can record 1080p HD and interference-free flight footage without adding an extra SD card and an action camera, reducing the overall weight of the drones and extending the flight time, allowing you to experience a more comfortable flight while recording 1080 HD videos.
Canvas Mode: supporting Betaflight, kiss, Inav, Ardu full OSD display and customization, you'll be able to customize various OSD fonts, colors and patterns you like and easily adjust the parameters you want via remote control.
Q: Can I use analog channels?/Can I fly with other analog pilots?
A: Yes, when you upgrade the firmware to 34.40.15 version, need switch to racing mode.
Specifications
Camera
Model: Avatar HD Nano Camera V3
Image Sensor: 1/3.2-Inch 4Mp 4:3 sensor
Resolution: 1080P/60fps,720P/120fps,720P/60fps
Ratio: 4:3 native / 16:9
Lens: 2.1mm
FOV: 160°
Aperture: F2.0
Shutter: Rolling Shutter
Min.Illumination: 0.001Lux
Weight: 3g （without cable）
Dimensions: 14x14x16.8mm
Coaxial Cable: 90mm(default)/140mm
VTX
Model Avatar HD Mini VTX V3
Communication Frequency 5.725-5.850GHz
Transmitter Power (EIRP) FCC:<27dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm
I/O Interface JST1.0x4(Power in)JST0.8x4(USB)
Mounting Holes 25.5x25.5mm(M2 hole);20x20mm(M3 hole)
Dimensions 31.5x31.5x9.4mm
Storage 32G
Recording 1080p/720p
Weight 13.4g
Operating Temperature -20-40℃
Channels 8
Wide Power Input 3.1V-13V
Supported FC System Betaflight; Inav; Fettec; Kiss; ArduPliot
OSD Canvas mode
Latency Average latency 22ms
Antenna 1(IPEX)
VTX Antenna
Model: Avatar V2 antenna
Polarization: LHCP
Bandwidth: 5600MHz-6000MHz
Average Gain: 1.9dBi
VSWR: ≤1.5
Interface: IPEX-1
Line Length: 105mm
Dimension: R15x45mm(without cable)
Weight: 2g
Includes
1x Walksnail Avatar HD Nano V3 VTX Kit w/ Nano Camera
1x 4 Pin USB Cable
1x 4 Pin Power Cable
2x M2x4/5/6mm Screws
4x M2x14mm Screws
4x M2x5x0.5mm washer
5x 2.1x3.4x1mm Gasket
1x 14 to19mm bracket
Lightweight design, ultra-thin experience
The Walksnail Avatar VRX Kit Combo is only 83g and comes with 114x55x22mm; a size easy to carry.
Walksnail VRX adopts a 4-antenna design. 2 directional antennas and the maximum transmission distance is 4km
1080P/60FPSWalksnail VRX adopts industry-leading H.265 encoding technology,which can provide a minimum delay of 22ms and a maximum resolution of 1080p.The HD picture quality takes you to experience the fun of flying a drone.
HDMI output ensures you enjoy uncompressed audio and video signals from the Walksnail HD system
Canvas ModeSupports Betaflight, INAV, and KISS with full OSD. You can easily adjust the parameters you want by remote control.
Specification
Camera:
Model Avatar nano/Avatar cameraImage Sensor: 1/2.7”1nchResolution: 1080P/60fps,720P/120fps,720P/60fpsRatio: 16/9 4/3Lens: 2.1mmFOV: 170°Aperture: F2.0Shutter: Rolling shutterMin.Illumination: 0.001LuxWeight: 3.5g/6gDimensions: 14x14x17mm/19x19x22mmCoaxial Cable: 90mm/140mm
VTX:
Model Avatar moduleCommunication Frequency: 5.725-5.850GHzTransmitter Power: (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC: <25dBmI/O Interface: JST1.0x6 (Power in) JST1.0x4(USB)Mounting Holes: 25.5x25.5mmDimensions 33x33x9.5mmStorage: 8GBRecording: 1080p/720pWeight: 16gOperating Temperature: -20-40℃Channels: 8Wide Power Input: 6V-25.2VSupported FC System BetaflightOSD Canvas modeLatency Average Delay: 22msAntenna: 2x (IPEX)Goggles Antenna Model: Red birdPolarization: LHCPBandwidth: 5.6GHz-6.0GHZAverage Gain: 1.9dBiRadiation Efficiency: ≥97%VSWR: ≤1.3Cross-Polar Rejection: -15to-30dBConnector: RP-SMADimension: H24.8mm x R15.3mmWeight: 4.2gAvatar HD VRX
Model Avatar HD VRXCommunicationFrequency: 5.725-5.850GHzTransmitterPower: (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC:<25dBmI/O Interface: HDMI, micro SD card slot, DC5.5x2.1mmHDMI output: 1080p/60fps, 720p/100fps, 720p/60fpsPower Input: 7-21V(2S-5S)SD Card Support:256GSystem: Avatar HD system
Includes:
Avatar VRX:RedBirdAntenna x2HDMI cable x12-in-1 DCPowerCable x1
PLUS one of the following based on option picked above
Avatar HD Nano KIT: (or buy alone)4 Pin USB Cable x16 Pin Power Cable x1M2x3/4/5mm Screws x2M1.2x1.5mm Screws x214-19mm Bracket x1
Avatar HD Micro KIT: (or buy alone)4 Pin USB Cable x16 Pin Power Cable x1M2x3/4/5mm Screws x4M1.2x1.5mm Screws x2
Avatar Mini 1S KIT: (or buy alone)4 Pin USB Cable x16 Pin Power Cable x1M2x3/4mm Screws x2M2x16mm Screws x4M2 Screw nut x42.1x3.4x1mm Gasket x5
Avatar Micro 8GB KIT: (or buy alone)USB transfer extension cable X14 Pin silicone cable X1M2x4mm screws X8M2x5mm screws X4M2x6mm screws X4M2x14mm screws X4M2x5x0.5mm gasket X4
Avatar Micro 32GB KIT: (or buy alone) USB transfer extension cable X14 Pin silicone cable X1M2x4mm screws X8M2x5mm screws X4M2x6mm screws X4M2x14mm screws X4M2x5x0.5mm gasket X4
Avatar PRO KIT 32GB: (or buy alone)USB transfer extension cable X14 Pin silicone cable X1M2x4mm screws X8M2x5mm screws X4M2x6mm screws X4M2x14mm screws X4M2x5x0.5mm gasket X4
Q&A:
Q: Is VRX compatible with goggles from other products?A: Compatible With Analog Goggles, HDMI Out(Our VRX module supports HDMI out, if your glasses support HDMI in it should work)Q: Do I need a set of goggles with a 1080p resolution or is 720p is enough?A: VRX supports 720P\1080PQ: Avatar HD Micro kit come with a 140mm cable between the VTX and camera?A: yesQ: Does the Pre-sale unit fit a 20x20 mount?A: Our VTX is 25x25Q: The difference between all 3 of the Walksnail kits? What is the Avatar 1s vs Avatar HD micro vs Avatar HD nano?A:The Mini 1s kit:350mw, Power Input: 3.1V-5V, VTX Weight 6.8gAvatar HD micro/nano kit standard version:1200mw, Power Input: 6V-25.2V, VTX Weight: 16gQ: Micro/Nano Camera difference?A:Weight：3.5g/6gDimensions：14x14x17mm/19x19x22mmCoaxial Cable：90mm/140mm
Quickly charge up to 12 Whoop 1S batteries to keep your small quad in the air with this parallel charging board! Features 6 jst (molex 1.25) connections and 6 PowerWhoop (PH2.0) connections. This board will work with ANY mainstream whoop battery, and any battery sold on this site.
Note, this board is capable of charging 2s batteries like our RDQ Series 300mah 2S battery. However, there are no balance ports on it since it's originally meant for 1S batteries which don't require cell balance.
Check out our other 1S Battery Chargers and Accessories!
Includes
1x Whoop Parallel Charging Board for 1S LiPo - JST & PH2.0
Experience superior navigation performance with the YMZFPV M10-5883 GPS (10th gen). Fast positioning, high accuracy, and strong signal reception lets you stay on course in any environment. Take the worry out of navigation with this reliable, 10th-generation GPS.
Check out our other GPS options and the rest of our YMZFPV Products
Features
Based on the new generation of M10050 chip, this product has a fast speed for star search and high positioning accuracy.
Using Nissan's LNA amplifier and custom the fine-tuned antenna of ceramic and three-frequency
This product can support: GPS Galileo, BDS three kinds of satellite system positioning to meet the positioning needs of users in different countries and regions
Built-in Flash chip, allowing you to use the U-CENTER software for personalized settings
The onboard electronic compass provides accurate orientation
The LED indicator of the side
High safety, and the protection circuit is designed in 5V and GND
The on-board farad capacitor can save the current satellite information for about 45-90min for a fast hot start
Specifications
Model: M10-5883
MCU-Ublox-M10050
GNSS: GPS, Galileo, BDS
Protocol Ublox
Frequency: 5Hz (Max. 10Hz)
Flash: Onboard FLASH (Modifiable)
Tracking sensitivity: -167dBm
Speed precision: 0.05m/s
Maximum speed: 500m/s
Maximum acceleration: 50000m
Positioning accuracy: 1.5m CEP (ideal environment)
Cold start: 26s
Hot start: 1s
Input voltage: 3.3V-5V
Dimension: 29 x 29 x 8.4mm
Weight: 12.8g
Includes
1xYMZFPV M10-5883 GPS w/Compass (10th gen)
