95076-4, Traxxas Sledge RTR 6S 4WD Electric Monster Truck w/VXL-6s ESC & TQi 2.4GHz Radio. (#TRA2872X Batteries x 2 Required) The Traxxas Sledge RTR 6S 4WD Electric Monster Truck, is an all out basher designed to give you the power and performance for serious off-road fun. This monster truck features a rock solid chassis, massive steel drivetrain, 6S power system and race inspired handling. These features lead to a truck that is designed to push the limits of off-road bashing and look good in the process. Pick up the Traxxas Sledge and leave everything else in the dust. Powering this monster truck is a Traxxas VXL-6S Velineon ESC and a 2000kV Brushless Motor. Traxxas then used massive steel gears, a triangulated chassis and a center T-bar brace to hold up to the 6S power. A special aluminum motor cradle is used to secure the motor in place eliminating motor  flex. The drive train features a torque-biasing center differential that distribute power evenly throughout the chassis. Solid steel axles are used front, center and rear to deliver the power to the wheels. The shock towers are 5mm thick and are tied directly to the center brace for further durability. Holding the truck up are large-bore GT-Maxx aluminum shocks mounted with 4mm hardware. Traxxas left no stone unturned and developed a truck that is ready for any terrain. Features: 1/8th Scale basher designed specifically for 6S power 20% larger and 75% thicker drive gears Triangulated chassis structure for superior chassis strength Remove and replace the body in just seconds with exclusive clipless body Includes a high-performance metal gear servo that produces over 347oz-in of torque 6S power system for brutal power Durable Sledgehammer tires are used for great handling and traction Specifications: Truck: Length (including wing): 23.78 inches (604mm) Front Track: 18.10 inches (459mm) Rear Track: 18.10 inches (459mm) Ground Clearance: 1.95 inches (50mm) Weight (no battery): 12.74 pounds (5.77kgs) Height (overall): 8.43 inches (214mm) Wheelbase: 15.10 inches (384mm) Shock Length (front): 5.12 inches (128mm) Shock Length (rear): 5.67 inches (144mm) Tire Diameter: 6.7 x 3.3 inches (170mm x 84mm) Wheel Diameter: 3.8 inches (97mm) Overall Drive Ratio: 17.2 (13/52 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip ESC:  Model: Velineon VXL-6s Input Voltage (cells): 4s–6s LiPo (max: 25.2 volts) BEC Voltage: 6.0 V BEC Current Continuous: 10 A BEC Current Peak: 20 A Reverse Delay: Yes, with lockout Motor: Type: 2000 kV sensorless brushless Connector Type: Traxxas 6.5mm bullet connectors Includes: (1) Traxxas RTR Sledge Monster Truck (1) TQi 2.4GHz radio system  (1) Jumper plug (for 4s battery use) (1) Quick Start Guide High quality maintenance tools Needed to Complete: 4S: (1) 4S 6700mAh LiPo Battery with Traxxas iD Connector or (2) 2S 7600mAh LiPo Batteries with Traxxas iD Connectors 6S: (2) 3S 5000mAh LiPo Batteries with Traxxas iD Connector (1) Compatible LiPo Balance Charger (4) AA Batteries This product was added to our catalog on August 16, 2022

Read more less

ARA4215V3, Arrma Infraction V3 1/8 RTR Electric 4X4 MEGA Street Bash Resto-Mod Truck w/Spektrum SLT3 2.4GHz Radio Features Signature INFRACTION Resto-Mod body, factory-finished in two stunning print scheme choices Body protecting roof skids and roll bars All-Road dBoots Katar vented tires on tough, gun-metal colored truck wheels Front and rear sway bays for the ultimate all-road handling Large front foam bumper, integrated with the body for maximum protection Powerful MEGA 9T brushed 570 motor Large rear diffuser to reduce turbulence and drag Threaded oil-filled shocks with silicone O-rings for easy ride height adjustment Strong, 4S capable metal-geared diffs Brushless-ready transmission with 1.35 Mod input and main diff gears, and silicone O-rings Front and rear double wishbone suspension 30+ mph speed capability with optional pinion gear (not included) Rubber shielded bearings throughout Spektrum SLT3 2.4GHz 3-channel transmitter and SLR300 receiver with IC3 connectors Spektrum S650 Digital Steering Servo (6kg-cm / 84 oz-in @ 6V torque) ARRMA MEGA Brushed ESC with IC3 connector (6-7 cell NiMH or 2S LiPo capable) Dynamite 3300mAh 8.4V 7-cell Speedpack 2 hump NiMH battery Completion Items Needed - FUG4300BP4 AA Alkaline Battery (4) Upgraded Batteries SPMX52S50H3 7.4V 5000mAh 2S 50C Smart LiPo G2 Hard Case: IC3 Spektrum Powerstage SPMXG2PS2 Smart G2 Powerstage Bundle for Surface 2S Upgraded Charger SPMXC2020 S1200 G2 AC 1x200W Smart Charger Specifications Scale: 1/8                                                                                      Length: 22.13 in (562mm) Width: 10.12 in (257mm) Height: 6.34 in (161mm) Weight: 6.6 lb (3kg) Wheelbase: 13.11 in (333mm)                                Parts List ARA550083  dboots Katar all road 35/085 wheel & tire set ARA330683  Front suspension arms ARA330685  C-Hubs (1 pair) ARA390301  MEGA 570 brushed motor ARA311112  Spur gear (55T,0.8Mod) This product was added to our catalog on April 10, 2021

Read more less

ARA8608V5, Arrma Kraton 6S BLX RTR 1/8 4WD Brushless Monster Truck (V5) w/SLT3 2.4GHz Radio The Arrma Kraton 6S BLX RTR 1/8 4WD Brushless Monster Truck V5 is driven by an updated, 6S-capable power system and supported by a strengthened chassis design. The Kraton 6S BLX 4WD Speed Monster Truck is ready out of the box to reach incredible speeds for thrilling, all-terrain bashing. ARRMA engineers have outfitted the KRATON 6S BLX 4WD with a brushless power system that now features the Spektrum Firma 150A Smart ESC and Firma 2050Kv brushless motor. The combination delivers incredible torque, acceleration and speed. Heavy-duty aluminum and steel chassis and transmission components take it all in its stride. For improved steering, ARRMA also includes a steel gear Spektrum S652 Digital Servo which is 32% stronger and 5% faster than the previous version's ADS-15M servo. Add your favorite 4S or 6S LiPo battery and watch this monster truck smash your speed expectations — up to 60+ MPH in optimum conditions with a 6S LiPo battery and the included optional speed pinion gear. The ready-to-run package now also includes a 3-channel Spektrum SLT3 radio and Spektrum SR315 dual protocol receiver. Perfect for long hours of fatigue-free bashing, the transmitter's ergonomic design features a foam steering wheel for precise fingertip control and an improved hand grip and trigger feel. If you're a new driver, you'll be able to set throttle limits at 50% or 75% until you're ready to use the full speed potential. The SLT3 is compatible with Tactic SLT receivers to run other RTR vehicles you may own, and includes a third channel to control optional features such as lights and winches on models that have them. Because the SR315 receiver can use SLT and DSMR protocols, you can easily upgrade to a Spektrum DSMR transmitter later — then, download the free Spektrum Dashboard app for your mobile device and take full advantage of the Smart telemetry capabilities already present in the Firma electronics. You'll be able to receive real-time updates of ESC temperature, receiver (BEC) voltage, drive pack voltage and motor RPM. Features: Ready-to-Run 60+ MPH (97 km/h) speeds achievable in optimum conditions using a 6S LiPo battery and the include optional speed pinion gear Spektrum™ SLT3™ 2.4GHz 3-Channel Radio Spektrum™ SR315 Dual Protocol 3-Channel Receiver Spektrum™ S652 Digital Servo Spektrum™ Firma™ 150A Smart ESC Spektrum™ Firma™ 4074 2050Kv Brushless Motor Safe-D pinion gears EXB front brace compatible top plate Stronger chassis design Heavy-duty arms front and rear Updated rear shock tower geometry Large volume waterproof* receiver box Anodized aluminum chassis Strong composite chassis side pods Center body support and brace for maximum durability High downforce wing Oil-filled adjustable shocks Black-anodized aluminum front and rear shock towers Durable steel driveshafts throughout Heavy-duty drivetrain All-metal diff outdrives and gearbox internals Never-loose red aluminum servo saver Never-pop ball ends 4-Bolt center diff removal Easy-access sliding motor mount for quick motor removal Multi-split spoke wheels Durable wheel hubs for increased strength Hub nut O-rings Multi-terrain dBoots® COPPERHEAD 2™ tires Detailed decals Body print style in red/black or blue/black IC5® connectors (EC5™ compatible) 2-year limited warranty (see manual for details) *NOTE: For details on waterproof standards, please refer to the product instruction manual Specifications: Approximate Assembly Time: No assembly required Ball Bearings: Full set Battery: Sold Separately Body: Painted, decaled and trimmed Brakes: User programmable Charger: Sold Separately Chassis: 0.12" (3mm) 6061-T6 aluminum Completion Level: Ready-To-Run Differential: 3-gear Drivetrain: 4WD Drive Type: Forward/Brake/Reverse Final Drive Ratio: 17.92 Front Shock Spring Rate: 6.2lbs/in (1.09N/mm) Front Track: 18.15" (461mm) Power Type: Electric Gear Pitch: 1.0MOD Ground Clearance: 1.85" (47mm) Inner Tire / Outer Wheel Diameter: 3.8 in Internal Gear Ratio: 4.3 Motor Size: 4074 Motor Type: Brushless - Sensorless Pinion: 12T Product Height: 7.68" (195 mm) Product Length: 23.39" (594 mm) Product Weight: 10.67lb (4.85kg) Product Width: 18.15" (461 mm) Radio: Included Rear Shock Spring Rate: 5.0lbs/in (0.87N/mm) Rear Track: 18.15" (461mm) Receiver: Included Scale: 1/8 Servos: Included Shock Type: Aluminum body oil-filled adjustable Speed Control: Included Spur Gear: 50T Suspension: Independent Tire Tread: dBoots COPPERHEAD 2 Tire Type: Multi-terrain Vehicle Type: Monster Truck Water-Resistant: Yes Wheelbase: 14.84" (377mm) Wheel Hex Size: 17mm Wheel Type: Five split-spoke monster truck Wheel Width: 3.3" (81.5mm) Includes: ARRMA® KRATON™ 6S BLX 1/8 Speed Monster Truck 4WD RTR Spektrum™ Firma™ 150A Smart 4S/6S ESC (installed) Spektrum ™ Firma ™ 4074 2050Kv Brushless Motor with ARRMA® Heatsink (installed) Spektrum ™ S652 Metal-Geared Digital Servo (installed) Spektrum ™ SR315 3-Channel Dual Protocol Receiver (installed) Spektrum ™ SLT3™ 2.4GHz 3-Channel Radio Needed to Complete: 4S or 6S LiPo Battery LiPo Compatible Charger LiPo Charging Bag (4) AA Batteries This product was added to our catalog on March 17, 2021

Read more less

ARA8708T1, Arrma Kraton 6S EXB RTR 1/8 4WD Brushless Monster Truck (Black) w/DX3 2.4GHz Radio, Smart ESC & AVC Get ready for the ultimate RC bashing experience with the 1/8 Kraton EXB 6S, an electrifying monster truck that has been taken to new heights with the addition of EXB options. This powerhouse is not just a mere RC vehicle; it's a high-speed, fearless beast designed for extreme thrills. The aggressive brushless power, combined with EXB upgrades, makes the Kraton EXB 6S is faster, more durable, and an unbeatable value for those who crave the adrenaline rush of extreme bashing. The Kraton EXB 6S is loaded with features and upgrades that set it apart from the rest. The powerful 6S LiPo capable Spektrum brushless power system ensures jaw-dropping speeds, while the EXB options, including laser-etched Extreme Bash 7075-T6 aluminum parts, enhance the truck's overall durability. The addition of plush oil-filled shocks, red-anodized aluminum front and rear bulkheads, and a redesigned servo saver contribute to improved strength, handling, and control. The V2 anodized aluminum chassis braces and other EXB-heavy-duty components make maintenance easier and add to the truck's value. The Kraton EXB 6S incorporates proven features such as all-metal gearbox internals, stronger front and rear diff outdrives, a heavy-duty drivetrain, and durable steel driveshafts. The composite chassis side guards, multi-split spoke wheels, and multi-terrain dBoots Copperhead 2 tires provide exceptional traction across various surfaces. The Spektrum Firma 150A Smart V2 waterproof ESC and Firma 4074 2050Kv brushless motor, along with the Spektrum S665 waterproof digital steering servo, ensure a powerful and reliable performance that can handle extreme bashing sessions with ease The 1/8 Kraton EXB 6S is a must-have for thrill-seekers and extreme bash enthusiasts. Its menacing appearance, coupled with the advanced features and upgrades, makes it stand out on the track. The combination of Spektrum electronics, EXB enhancements, and a rugged design ensures that this monster truck is not only faster and more fearless but also a better value than ever before. If you're looking for an RC vehicle that can handle the most extreme bashing conditions while delivering an unmatched level of excitement, the Kraton EXB 6S is the ultimate choice. Features: Fully Assembled and Ready-To-Bash! Loaded with Red Anodized Aluminum EXB (Extreme Bash) Upgrades Durable Steel Driveshafts, All-metal Differentials Outdrives and Gearbox Internals Redesigned Servo Saver with a Direct Steering Feel Upgraded One-piece Wing Mount 65MPH+ Spektrum 6S Water-Resistant Brushless Power System DX3 Smart Transmitter and SR6200A Receiver with AVC (Active Vehicle Control) All-Terrain High-Traction dBoots Copperhead 2 Big Block Tires EXtreme Bash Upgrades: EXB aluminum laser-etched 3mm chassis plate EXB aluminum front and rear bulkheads and shock towers EXB emulsion shock caps and standoffs EXB multi-structured center brace EXB servo mount EXB front and rear arms EXB front bumper and skid plate EXB heavy-duty turnbuckles Specifications: Scale: 1/8 ESC Type: Firma 150A Sensorless Brushless Motor Type: Brushless 4074-2050kV Input Voltage: 4-6S (14.8-22.2V) Connector Type: IC5 Drivetrain: 4WD (3 Gear Differentials) Length: 23.58" (599mm) Width: 18.15" (461mm) Height: 7.68" (195mm) Wheelbase: 14.84" (377mm) Weight: 12.24lb (5.55kg) Hex Size: 17mm Gear Pitch: MOD 1 Spur Gear Size: 50T Pinion Gear Size: 13T Completion Level: Ready-To-Run Includes: (1) 1/8 KRATON 6S BLX 4x4 EXtreme Bash RTR Monster Truck (1) Spektrum 2.4GHz DX3 Smart DSMR Transmitter & SR6200A Receiver (4) AA Batteries Needed to Complete: (1 -2) LiPo Battery For Chassis 4S Completion Guide: (1) 4S (14.8V) Hard-Case 6.22x1.89x2.76" (158x48x70mm) (2) 2S (7.4V) Hard-Case 6.22x1.89x2.76" (158x48x70mm) 6S Completion Guide: (1) 6S (22.2V) Hard-Case 6.22x1.89x2.76" (158x48x70mm) (2) 3S (11.1V) Hard-Case 6.22x1.89x2.76" (158x48x70mm) (1) Compatible LiPo Charger This product was added to our catalog on December 23, 2023

Read more less

KYO34932B, Kyosho Hang On Racer Honda NSR500 Electric 1/8 Motorcycle Kit The Kyosho Hang on Racer is still as popular as ever. The S.D.S.S (semi direct steering system) delivers high performance fully independent motion with the rider figure incorporating 13 different articulating joints so it hangs on to the bike as it leans into corners. The result is driving performance just like a real motorcycle that is easy enough for anyone to control. Each section of the bike is designed with an incredible level of scale detail. From the body cowl, inverted front fork suspension, brake disk & calipers, wheels, drive chain, sprocket and asymmetrical swing arm - this is an RC model that is packed full of realism that makes it worthy of display. However, as only a few parts are used in construction, even beginners can enjoy the satisfaction of the assembly that only takes a short time to complete. Dive deep into the fascinating realm of R/C electric motorcycles like never before and discover the pure enjoyment of building, displaying and driving your own Hanging On Racer. Features: Recreation of the Honda NSR500 that competed in the 1991 Road Racing World Championship Grand Prix (WGP) 500cc class Features chain drive system incorporating sprocket and mini chain, similar to a real motorbike. Includes Le Mans DM20 motor with moderate power and easy control characteristics. Unique S.D.S.S enables full bank cornering. Twin tube style mainframe optimizes space utilization with air-cooling. Inverted front fork suspension. Rear suspension uses asymmetrical swing arm with mono-shock friction damper. Specifications: Length: 270mm Width: 98mm Height: 190mm Wheelbase: 185mm Tire (F/R): 78×18mm/86×23mm Gear Ratio: 13.80:1-19.30:1 Weight: 750g (approx.) Motor: Le Mans DM20 Includes: Unassembled chassis kit Pinion gear (10T, 12T, 14T) Grease Cross wrench Pinion gear tool Needed to Complete: 2 channel R/C system Battery for model (7.2V-1600mAh Ni-MH recommended) (1) servo (L32 x W16 x H31.5 max.) (1)  ESC (L34×W24×H14mm max.) Batteries for transmitter Battery charger Charger Adapter Paint and paintbrush This product was added to our catalog on September 5, 2022

Read more less

TLR04009, 8IGHT XT/XTE Race Kit: 1/8 4WD Nitro/Elec Truggy Product Detail  In The Box (1) TLR 8IGHT XT/XTE Nitro/Electric Truggy Race Kit (1) Product Manual  Needed to Complete (1) Transmitter and Receiver (1) Steering Servo (1) Compatible Battery Charger (1) Tire Glue (4) Tires Polycarbonate Paint Tools (Please reference the manual for more details) For Electric Power: (1) Brushless Motor (1) Brushless ESC (1) 4S 14.8V LiPo Battery For Nitro Power: (1) Nitro Engine and Tuned Pipe (1) Receiver Battery (1) Receiver Switch (1) Throttle Servo (1) Fuel Bottle (1) 20-30% Nitro Fuel (1) Starter Box Quick Links Features Nitro and Electric Parts Included Improved Suspension Geometry Flex Tune Suspension Arms Wider 3mm Chassis Larger Pinion Bearing Cab Forward Style Body Chassis Side Guards Large Footprint Nitro Engine Mount One Piece Electric Motor Mount Adjustable Caster Blocks Bleeder Shock Caps Balanced Chassis Ackerman Adjustable Draglink Steering Rack Machined Aluminum Shock Towers Better Diff Access Sway Bar System Equalized Driveline Updated Radio Tray Optimized Shocks Ball Bearing Throttle and Brake Actuator Large Bearing Spindles and Carriers Shorter Wheelbase LiPo/LiIon Compatible Battery Box Overview The new Team Losi Racing® 8IGHT-XT/XTE Next Generation Truggy builds on the championship-winning heritage of its predecessors with updates to the suspension geometry and drivetrain as well as the chassis layout that make it both easier to drive and tougher to beat. Plus, it includes Nitro and Electric in one box! The 8IGHT-XT/XTE has a combination of features second-to-none including large footprint engine mount, 3mm chassis, cab forward body, machined aluminum shock caps, and so much more. Designed to win straight out of the box, the 8IGHT-XT/XTE expands performance and is ready for the winner's circle.   Nitro and Electric parts included All of the items to run either nitro or electric included in one box.   Improved Suspension Geometry The 8IGHT-XT/XTE Next Gen suspension geometry has been completely revamped making a truck that is fast, nimble, and easy to drive. This includes a myriad of updates including wider front pivot with less scrub radius, narrower rear pivot, longer front and rear arms, and updated hub offset.   Flex Tune Suspension Arms All new suspension arms have been designed to accept stiffener plates that will allow racers to tune the flex of the suspension. The kit will include molded plates with optional carbon fiber plates available separately.   Wider 3mm Chassis Chassis width has been increased to aid in stability and give the truggy a more neutral feel as well as equalized side to side for equal torsional flex and thinned down to 3mm for weight savings.   Larger Pinion Bearing The internal pinion bearing size in the front and rear has been increased for added durability.   Cab Forward Style Body Cab forward design helps with overall down force, which improves steering and overall stability.   Chassis Side Guards New chassis side guards that have an improved fit onto the chassis.   Large Footprint Nitro Engine Mount Lightweight large footprint engine mount that reduces flex underneath the engine to eliminate chassis fatigue on high traction race surfaces for nitro.   One Piece Electric Motor Mount One piece aluminum motor mount that is easy to adjust pinion sizing for electric motors.   Adjustable Caster Blocks 17.5 deg caster blocks that allow the height of the spindle to be adjusted.   Bleeder Shock Caps Machined aluminum shock caps with threaded bleeder holes for easy and consistent bleeding of oil.   Balanced Chassis The weight has been moved forward in the chassis to provide a better driving balance to the vehicle and less parts needed to carry.   Ackerman Adjustable Steering Rack Redesigned steering rack which will allow more ackerman adjustments and an improved servo saver to eliminate bellcrank bind during high loads.   Machined Aluminum Shock Towers Redesigned machined 7075-T6 aluminum shock towers with updated camber link holes.   Better Diff Access The front and rear diff case have been altered to allow easier access to the differentials without removing the bulkheads from the vehicle.   Sway Bar System New sway bar system that has adjustable length links to allow better equalization of each side of sway bar as well as collars that keep the sway bars centered.   Equalized driveline The center drive shaft angles have been modified so they are equal front to rear allowing for a more 4wd feel to the vehicle.   Updated Radio Tray An updated radio tray now puts the throttle servo near the engine to eliminate additional linkage. The updated radio tray will ensure the throttle servo is rigidly mounted to avoid any flex by floating the servo off of the center differential.   Optimized Shocks The 8IGHT-X shocks are optimized and lightened to decrease the center of gravity and lower the weight of the car.   Ball Bearing Throttle and Brake Actuator The throttle and brake actuator uses ball bearings in order to give a super smooth feel on the throttle.   Large Bearing Spindles and Carriers All four corners of the vehicle have been updated to use large ball bearings and the same bearings.   Shorter Wheelbase The wheelbase has been shortened to aid in grip as well as provide more agile handling.     LiPo/Li-Ion Compatible Battery Box The battery box has been designed so that you can now fit either common LiPo receiver packs or Li-Ion receiver packs.   Product Specifications Product Length 21.1" (536 mm) Ball Bearings Full set Chassis 0.12" (3mm ) 7075-T6 hard anodized aluminum Completion Level Kit Drivetrain 4WD Drive Type Forward/Reverse Product Height 7.3" (185 mm) Product Weight 9.0 Vehicle Type Truggy Water-Resistant Yes Front Track 15.8" (402mm) Product Width 16.6" (422 mm) Radio Sold Separately Power Type Electric/Nitro Gear Pitch 1.0 Mod Servos Sold Separately Charger Sold Separately Differential 3 sealed viscous filled gear diffs Max Battery Dimensions 5.4 x 1.8 x 1.5" (138 x 47 x 40mm) Receiver Sold Separately Shock Type Aluminum body, oil-filled Final Drive Ratio 16.6:1 Rear Track 15.8" (402mm) Speed Control Sold Separately Wheelbase 14.7" (373mm) Approximate Assembly Time Approximately 3-5 hours Body Unpainted Brakes Ball bearing equipped brake actuator Scale 1/8 Gear Ratio 4.5:1 Ground Clearance 1.6" (40mm) Internal Gear Ratio 4.5:1 Suspension Independent Track Surface 15.8" (402mm) front and rear Spur Gear 48T Fuel Tank Capacity 5.1oz (150cc) Engine Size .21 cu in (3.4cc) sold separately Battery Sold Separately

Read more less

TLR04010, 8IGHT-X Elite Race Kit: 1/8 4WD Nitro Buggy

Read more less

TLR04011, 8IGHT-XE Elite Race Kit: 1/8 4WD Electric Buggy

Read more less

TRA7998, XRT Hardware Kit Give your XRT a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts.  This product was added to our catalog on October 4, 2023

Read more less

TRA9594X, Sledge Stainless Bearing Kit Boost performance and reduce maintenance with this stainless steel bearing kit. The bearing kit replaces the standard bearings with high quality stainless steel bearings for long-lasting performance in wet conditions. High quality black seals offer ultimate protection from the elements with less maintenance in dirty environments. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. This product was added to our catalog on October 4, 2023

Read more less