CSE010016502, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/1717 Sensored Motor (1650kV) COMPATIBILITY: Arrma Felony 6S BLX Arrma Infraction 6S BLX Arrma Infraction V2 6S BLX Arrma Limitless Arrma Outcast 8S BLX The Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo with 1717 Sensored Motor is an incredible combo developed specifically for high voltage large scale applications. The MAMBA MONSTER X 8S ESC utilizes Castle’s proprietary CRYO-DRIVE technology helping to reduce the heat generated, and remove heat more efficiently. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a level never seen before. Mamba Monster X 8S is a workhorse that will dominate in the harshest of environments. Designed with durability in mind, this ESC features a robust aluminum case, combined with epoxy potting helps to guarantee protection around the circuitry, as well as allowing all-weather use. You can easily optimize the ESC for any driving condition - rugged terrain, smooth pavement, or rock and gravel, the MMX8S can handle it all. Plus, the Castle Link Programming Suite will allow the user to create, save and download setup profiles using a Windows™ PC, or wirelessly with the convenience of the B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. The MMX8S also allows tuning on-the-fly via the Auxiliary wire, allowing access to programming parameters such as Torque Control, Max Brake or Rock Race Mode, further optimizing your vehicle for any racing or bashing application you can imagine! When paired with the included Castle 1717-1650KV sensored motor, heavy, high speed rigs will experience controllable low-end control without sacrificing power, punch or speed. This motor is a blast from the past with the added benefit of sensored capabilities! It is the perfect upgrade for any 1/6th scale vehicles weighing up to 20 lbs and running up to 8s LiPo; it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles! The Castle 1717 1650KV sensored motor features an improved 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs. Application Guidelines: Mamba Monster X 8S and 1717-1650Kv motor is intended for use in 1:6 scale vehicles weighing up to 20 lbs. and running up to 8S LiPo. Also a great upgrade for heavier 1/8th vehicles. Features: ESC: Input Voltage Range 2S-8S LiPo Sensorless, Sensored and SmartSense™ Running Modes Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to  protect the electronics and promote efficient heat transfer Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation Oversized factory equipped thermally controlled 40MM cooling fan Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters Waterproof design for all weather conditions Data logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty Motor: 4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat Proprietary stator winding produces low internal resistance for a cooler running motor Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs Specifications: ESC: Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (40MM), fully removable** (see Product Use Statements below) Size: L x W x H 69.5mm x 54.1mm x 47mm Weight (with no battery connector): 5.75 oz. (163 grams) Connectors: 6.5mm female bullets for motor connection. Items Needed for Operation: A high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters. Motor: Input Voltage Range: 3S-8S LiPo Kv: 1650 Max. RPM: 56,000 Size: Length: 3.35" (85.1mm) Diameter: 1.87" (47.6mm) Weight (w/wires):  21.08oz. /597.6g Shaft Diameter: 5mm Mounting Hole Specifications: M3 and M4@25.4mm (1.0") Diameter Cooling Fan: Not available Connectors: 6.5mm male connectors Application Guidelines: Ideal for vehicles up to 20lbs running 6s – 8s LiPo.  Examples include Losi LST2-E; Arrma™: Limitless™, Typhon™ 6s, Infraction™, Talion™ 6s; Traxxas: E-Maxx™, E-Revo™, UDR™, Summit™; Redcat Shredder™ ESC Product Use Statements: Recommended battery capacity for 1:6th scale vehicles is 5000mah. We recommend using 50C continuous discharge or higher LiPo batteries. Surge ratings should never be used to determine a pack’s suitability for a brushless application. Castle recommends a high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors. Applying voltages higher than 33.6V will cause irreparable damage to ESC. Although Mamba Monster X 8S is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt. The ESC cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Tech Notes: This motor includes 10AWG wire and 6.5mm connectors for use specifically this ESC/Motor combo. Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs. Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. Includes: Mamba Monster X 8S ESC 4-POLE Sensored 1717-1650KV Motor Castle Sensor Harness Adapter 200mm Sensor Wire Mamba Decals Coupon for free Castle Link USB ESC Quick Start Guide Motor Quick Start Guide This product was added to our catalog on June 23, 2021

Read more less

DISCONTINUED HWI30402950, Hobbywing EZRUN 4985SL 4-Pole 1/6-1/7 Scale Sensorless Brushless Motor (1650kV) Hobbywing EZRUN 4985SL 4-Pole 1/6-1/7 Scale Sensorless Brushless Motor. Specifications: Model: 4985SL-1650KV Pole: 4 KV (No-load): 1650KV Resistance: 0.0053 ? Current (No-load): 5.4 A Max. Output Power: 5700 W Current at the point of M.O.P: 160 A Motor Diamter: 49mm  Motor Length: 86.5mm Shaft Diameter: 5.0mm Shaft Length: 21.5mm LiPo Cells: 3-6 Weight: 587g (20.71oz) Applications: 1/6th & 1/7th RC Vehicles Suitable ESC: Ezrun MAX6 ESC This product was added to our catalog on April 25, 2021

Read more less

KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger The Kyosho Wave Chopper 2.0 Type 1 Electric Personal Water Craft brings fun to the water with the revival of the Wave Chopper! Originally released in 2001, the Wave Chopper 2.0 features modern RC technology and performance. A redesigned rudder, stern tube and motor mount in the 1/6th hull, and an updated rider figure are combined with the latest RC components to take this model into the next generation. Optimal torque from the G14L water cooled 550 class motor works perfectly with the large capacity Kyosho Speed House KA60-91W speed controller to deliver crisp acceleration and racy performance while reducing heat loss. Styrene floats provide buoyancy that make the hull unsinkable, even if it is not completely waterproof. The hull and rider are pre-assembled, so all you need to do is install four AA batteries (sold separately) into the transmitter, charge the included NiMH battery, and mount the rider figure to get this model fully ready to run.  Features: Kick up rudder protects both the rudder and hull from unexpected contact and delivers smooth turning performance Built in water intake channels water into the cooling jacket on the motor for effective cooling Optimal angle of the stern tube along the bottom of the hull reduces drive resistance allowing the fully submerged propeller to generate quick and smooth acceleration Pre-installed 550 class G14L motor is fitted with a water cooling system to prevent heat loss High rigidity suspended motor mount maximizes drive efficiency and easy maintenance 7.2V 2200mah battery and USB delte peak charger are included with the pre-assembled hull and 2.4ghz transmitter Specifications: Length: 595mm Width: 220mm Height: 350mm Weight: 1,600g approx. Transmitter: KT-231P+ ESC: KYOSHO SPEED HOUSE KA060-91W         Servo: KS4031-06W Motor: 550-class G14L motor with water-cooling jacket Battery: 7.2V-2200mAh NiMH Compatible battery size: 148x52x30mm or less (LxWxH) Charger: Ni-MH battery dedicated USB charger Propeller: D31xP1.4 (Polycarbonate) Maximum speed: 24km/h approx. Operation time: 5 min approx. Includes: Fully assembled hull Syncro KT231P+ transmitter Injection molded boat stand Pre painted figure Hex wrenches 1.5 & 2.5mm Spanner 4.0 & 5.5mm Antenna tube 7.2V 2200 mAh Ni-MH battery and USB delta peak charger PVC tape for waterproofing Needed to Complete: (4) AA batteries for transmitter This product was added to our catalog on May 3, 2023

Read more less

PRO1019810, Pro-Line Badlands MX57 5.7" Pre-Mounted 1/6 Monster Truck Tires (Black) (2) (Z3) w/Raid Wheels Pro-Line Badlands MX57 5.7" Pre-Mounted 1/6 Monster Truck Tires with Raid Wheels. These Badlands are based on the MX43 tire and features the same aggressive tread combination. Now mounted on the Raid wheels, these tire and wheels weigh 20% less than prior models. Pro-Line Badlands tires are known for having a sweet Motocross inspired tread and the Badlands MX57 tires kick that up a notch with a Bigger and Bolder knobby tread that matches modern MX tire design.The Raid 5.7" wheels use a 24mm hex with the standard 1/5 scale through hole to fit most 1/5 scale vehicles like the Arrma Kraton 8S and includes machined aluminum wheel washers to fit onto the Traxxas X-Maxx platform. Inspired by popular full-size off-road wheels, the Raid 5.7" wheel is extremely tough and lightweight. Features: Tires: Incredible Traction on Any Surface Ultra-Durable and Anti-Ballooning Tire Compound Aggressive Motocross-Inspired Appearance Nearly 20% Lighter than the Previous Version Foam Inserts Included Made in the USA, since 1982 Wheels: 24mm Hex with Standard 1/5 Scale Through Hole to Fit Most Large-Scale Vehicles Machined Aluminum Wheel Washers Included to Fit the X-MAXX® Platform Extremely Tough with Bold Style to Match Blacked-out Raid Wheel Styling Specifications: Scale: 1/6 Package Type:Pre-Mounted Wheel Width:5.7" Inner Diameter: 5.7" Width: 3.72" (94 mm) Height: 8.35" (212 mm) Weight: 682 grams (1.5lbs) Tire Compound:Medium Vehicle Type:Monster Truck Tire Type:All-Terrain Tire Tread:Badlands MX57 Wheel Position:Front/Rear Wheel Type:Raid Wheel Hex Size: 24mm Includes: (2) Pre-Mounted Badlands MX57 All Terrain Tires (2) Aluminum hub adapters This product was added to our catalog on March 31, 2021

Read more less