70054-1, Traxxas Slash 4x4 1/16 4WD RTR Short Course Truck w/TQ 2.4GHz Radio, Battery & DC Charger This is the Traxxas 1/16 Scale Slash 4X4 RTR Short Course Truck, with an included Traxxas TQ 2.4GHz Radio System, High-Torque Titan 550 12 Turn Motor, 6-Cell 1200mAh Power Cell NiMH Battery, a 2 AMP Peak Detecting DC Charger and Mark Jenkins body. Now featured with this kit are the updated Traxxas iD connectors now included as standard equipment. CHARGER NOTE: The included charger requires a cigarette lighter socket found in full size vehicles to charge. If this is not your preference, Traxxas offers an adapter allowing you to charge from a standard home AC electrical socket (TRA2976).   The Traxxas Slash set the standard for short-course fun and versatility, then the Slash 4X4 raised the bar on short-course performance with category-making speed, power, and track-ready handling. Now you can experience the fun of wheel-to-wheel Slash 4X4 racing 1/16 scale with high-torque Titan 550 power--the largest motor in the "mini" class by far! At 14 inches long, the 1/16 Slash 4X4 is about half the size of the 1/10-scale Slash 4X4. But don't call it a "mini"—this is a whole new category of R/C performance and fun that no mere mini-model can match. Short-course styling that captures the attitude of the full-size Traxxas TORC-series racer is just the beginning. Beneath the Race Replica polycarbonate shell, you'll find the winning suspension technology of the eight-time National Champion Traxxas Revo and the convention-busting innovation of the E-Revo. In-Depth Features: Titan 12-Turn 550 Modified Motor: 1/16 Slash 4X4 includes a powerful Titan 12T 550 modified motor with internal cooling fan. The Titan's over-sized armature (30% larger compared to 540-sized armatures) is equipped with 12-turns of pure copper wire for big torque and increased power-handling capabilities. Lower running temperatures are achieved with the integrated cooling fan. The Titan 12T requires very little maintenance and is designed for consistent torque and high speeds from run to run, without fading. Revo-Spec Suspension: The unique Revo-Spec suspension geometry multiplies the suspension travel to lengths normally found on larger models. It provides true progressive rate performance that's light over the small bumps and instantly tightens when compressed to resist bottoming out over large jumps. Oil-Filled GTR Shocks: 1/16 Slash 4X4 's super-smooth oil-filled shocks damp the suspension and maintain control no matter how rugged the terrain. They are fully tuneable and include pressure bladders for air/oil separation and threaded spring pre-load collars for quick ride height adjustments. All-Terrain Tires & Wheels: Designed for all-terrain action, each corner of the 1/16 Slash 4X4 is equipped with pre-glued all-terrain tires on impressive beadlock-style wheels. The tires deliver the perfect balance of forward traction and side bite on asphalt, dirt, and any other surface you throw at them. 12mm mounting hexes open the door to additional wheel and tire combos to tune traction for specific surfaces—even foam tires for carpet racing. Race Replica Painted Bodies: No need for a paint or sticker session; 1/16 Slash 4X4 rolls out of the box ready for action with a factory-finished and mounted Race Replica body and decals already applied for you, so its Ready-to-Race. Traxxas 1/16 Slash 4X4 is available in four Race Replica versions: Mike Jenkins (Traxxas #47), Mark Jenkins (Traxxas #25), Scott Douglas Edition (Amsoil), and Greg Adler (4 Wheel Parts). Precision 2.4GHz Control: With the TQ 2.4GHz radio system, you just switch on and drive. There are no channels or frequencies to manage, so the focus is on having fun. The TQ’s ergonomic design is comfortable for all-day driving, and its sleek lines are enhanced by an internal antenna that is impervious to damage. To customize the controls, the transmitter’s factory servo directions can be easily reversed using the TQ’s simple programming system. Traxxas High-Current Connectors: The High-Current connector is more than just another connector, it's a virtual fail-safe. Each High-Current connector is specifically designed to mate with the proper charger. This means no more accidentally charging a LiPo on a NiMH charger. Ball-Bearing Transmission With Torque Control Slipper Clutch: 1/16 Slash 4X4's high-efficiency, heavy-duty transmission is built for brushless power when you're ready to Power Up. An adjustable slipper clutch lets you tailor power delivery to suit the terrain and your driving style, and precision ball-bearings make certain every ounce of Titan torque is transferred to the wheels. Full-Time 4WD With Sealed, Silicone-Filled Differentials: Sealed, silicone-filled differentials resist "unloading" for superior performance and authentic handling as you drift the 1/16 Slash 4X4 through corners with precision and control. The viscosity of the differential fluid has been carefully tuned for exciting on-road performance, and the shaft-driven 4WD system delivers instant acceleration with proven efficiency and durability. Pivot Ball Suspension: The 1/16 Slash 4X4 features pivot-ball suspension for smooth suspension articulation and easy adjustment. Rubber-sealed ball bearings ward off dirt and debris as they increase precision and reduce friction, and the oversized 8x12mm inboard bearings maximize durability. For extra security, the heavy-duty axle carriers are designed so the universal-joint axles' crosspins are captured by the inner bearings—another example of Traxxas' attention to every detail. Universal-Joint Driveshafts: High-performance on-road driving requires smooth, efficient power delivery as the car drifts through turns and powers from challenge to challenge with sustained steering input. Chattering dogbones won't cut it! Traxxas steps up with fully equipped telescoping universal-joint axles for optimum drivetrain efficiency and maximum power transfer. The true-curvilinear spline design operates freely, and the oversized U-joints set the standard for strength and high-power durability. Waterproof Electronics: Mud. Water. Snow. 1/16 Slash 4X4's waterproof electronics and fully sealed receiver box let you make tracks in conditions that leave other trucks parked at home. Traxxas' innovative, ground-breaking waterproof receiver box puts 1/16 Slash 4X4 in a league of its own. The antenna and servo wires route neatly through a special watertight seal (patent pending). To protect the receiver from dust and water a custom shaped blue O-ring seals the receiver box. Thanks to the unique design, the receiver can be removed for service and even aftermarket receivers can be used, without losing the sealing properties of the box. Digital High-Torque Waterproof Steering Servo: Small but powerful, the 1/16 Slash 4X4's 2080 servo cranks out 41.7 oz.-in. of tire-turning torque with digital circuitry for responsive control—even in water, mud and snow, thanks to its o-ring-sealed waterproof construction. Dual Battery Compartments: The 1/16 Slash 4X4 unleashes its full speed potential with the included Power Cell battery pack, but for extended run time and more "punch," the chassis' dual battery compartments let you add a second NiMH battery pack and Traxxas parallel connector (both sold separately) to double the available battery capacity. Traxxas Power Cell NiMH Battery Pack: 1/16 Slash 4X4 is fully assembled and Ready-To-Race with an included Power Cell NiMH battery and charger. This potent pack features heavy-duty construction, 16-gauge wires and Traxxas' exclusive High-Current Connector for efficient power transfer, run after run. A convenient DC charger is also included. Everything you need to power-up is in the box. Quick-Release Battery Doors: Traxxas uses an innovative solution for easy battery installation. Quick release doors snap open and closed in seconds for fast and easy battery loading. There are no clips to lose in the field and the potential for fast battery changes during pit stops opens the door for a whole new class of electric racing. Battery Cooling Vents: Artfully designed intakes and exits allow cooling air to circulate through the battery enclosures to lower the temperature of the batteries for maximum run-time and "punch." Rubber-Sealed Ball Bearings: Precision rubber-sealed bearings offer the ultimate in low-friction performance and maximum protection in dirty environments. They are used in all exposed locations and are virtually maintenance free. Progressive Rate Travel: Innovative linkage-based suspension geometry multiplies suspension travel and increases spring and damping rates as the shocks are compressed for instant small-bump compliance without compromising shock-absorbing performance for big hits. Hex Hardware: Pro-quality, high-grade, metric hex-drive hardware is used throughout for extra strength, and easy maintenance and repair. The black-oxide rust-resistant finish provides a high tech-look and feel. Fully Customizable With Traxxas Factory Options: Designed and engineered for lasting performance, high precision, superior durability and unbeatable style, genuine Traxxas options for 1/16 Slash 4X4 are the perfect way to tailor your truck to the track, or just add the unique touches that make it your own. From red-anodized toe links and pushrods to CV axles and hard-anodized shock bodies, Traxxas offers a wide range of performance parts for the 1/16 Slash 4X4. Features: Officially Licensed Race Replica body styles: Mike Jenkins Edition (Traxxas #47), Mark Jenkins Edition (Traxxas #25), Scott Douglas Edition (AMSOIL®), or Greg Adler Edition (4 Wheel Parts) Full-time 4WD for superior handling and control XL-2.5 Electronic Speed Control High-torque Titan 12T 550 motor Waterproof electronics Ready-To-Race with included 6-cell NiMH Power Cell battery and charger TQ 2.4GHz radio system Revo suspension technology Torque-control™ slipper clutch Sealed differentials Traxxas High-Current Connector Metric hex hardware Rubber-sealed ball bearings Specifications: Length: 14" (356mm) Front Track: 7.3" (185mm) Rear Track: 7.3" (185mm) Weight: 35oz (1000g) Height (overall): 4.92" (125mm) Wheelbase: 8.1" (206mm) Gear Pitch: 48-Pitch Includes: Traxxas 1/16 Slash 4X4 RTR TQ 2.4GHz Radio System XL-2.5 Electronic Speed Control High-Torque Titan 12T 550 Motor Race Replica Painted Body  6-Cell NiMH Power Cell 2 AMP Peak Detecting DC Charger  Needed To Complete: (8) "AA" Batteries (for transmitter) This product was added to our catalog on April 21, 2021

Read more less

70054-8, Traxxas Slash 4x4 1/16 4WD RTR Short Course Truck (Black) w/XL-2.5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger Traxxas Slash Brushed 1/16 4WD RTR Short Course Truck. Don’t let the smaller size fool you, this little slash packs all the power and durability to deliver a thrilling and fun experience just like its popular bigger brother the 1/10 4x4 Slash. Packed under the factory-finished polycarbonate shell, you’ll find the same suspension technology found in the renowned Traxxas Revo, all-weather ready powerful brushed electronics with all the speed, quality, and performance you crave in a convenient 1/16 scale all-out offroad excitement, anytime, anywhere! This 1/16 Slash takes all the track-proven innovation of the full-size Slash and scales it down to a convenient go-anywhere size. The rocker-actuated suspension has been expertly adapted to 1/16 scale with its oil-filled, threaded-body GTR shocks. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. In addition, the monocoque chassis balances strength and weight to far surpass the standards of the "mini" category. Built specifically for Traxxas 1/16 scale models, the XL-2.5 speed control and Titan 12-Turn 550 motor are fully LiPo compatible with low-voltage detection for 2S LiPo packs and rated for 6-cells NiMH, this powerful combo gives the 1/16 Slash precise throttle control and a top speed of 20+ MPH out of the box! Get the 1/16 Slash to get a taste of all the thrills, fun and durability this legendary mini basher can offer and find out why it set the bar high for all these years to become one of the most sought after mini R/C Cars!  Features: Fully assembled and ready-to-run Waterproof powerful brushed electronics External gear cover with easy slipper access Rocker-actuated suspension and threaded oil filled GTR shocks Full-time 4WD Ball-Bearing transmission With Torque-Control slipper clutch Sealed silicone-filled differentials Equipped with a 2-amp USB-C fast charger! Dual battery compartments with quick-release doors Up to 20+mph with included NiMH battery Specifications: Scale: 1/16 Length: 14" (356mm)) Width: 7.3" (185mm) Height: 4.92" (125mm) Wheelbase: 8.1" (206mm) Weight: 35oz (1kg) Power Source: Electric Input Voltage: 6-cells (7.2V) NiMH 2S (7.4V) LiPo Drive: Shaft-driven 4WD Gear Pitch: 48P Gear Ratio: 5.04:1, (Reversed input: 9.72:1) Assembly: Ready-To-Run Includes: (1) Traxxas Slash 1/16 RTR 4WD Short Course Truck (1) 2-Amp USB-C Fast Charger (1) NiMH Battery with Traxxas ID (1) User Manual Needed to Complete: (4) (AA) for Transmitter This product was added to our catalog on September 27, 2023

Read more less

71054-8, Traxxas E-Revo 1/16 4WD RTR Truck w/XL-2.5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger Traxxas E-Revo Brushed 1/16 4WD RTR Monster Truck. Don’t let the smaller size fool you, this little brushed monster truck packs all the power and durability to deliver a thrilling and fun experience. Packed under the factory-finished polycarbonate shell, you’ll find the same suspension technology found in the renowned Traxxas Revo, all-weather ready powerful brushed electronics with all the speed, quality, and performance you crave in a convenient 1/16 scale all-out offroad excitement, anytime, anywhere! This 1/16 E-Revo takes all the track-proven innovation of the full-size E-Revo and scales it down to a convenient go-anywhere size. E-Revo's rocker-actuated suspension has been expertly adapted to 1/16 scale with its oil-filled, threaded-body GTR shocks. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. E-Revo's monocoque chassis balances strength and weight to far surpass the standards of the "mini" category. Built specifically for Traxxas 1/16 scale models, the XL-2.5 speed control and Titan 12-Turn 550 motor are fully LiPo compatible with low-voltage detection for 2S LiPo packs and rated for 6-cells NiMH, this powerful combo gives E-Revo precise throttle control and a top speed of 20+ MPH out of the box! Get the 1/16 E-Revo to get a taste of all the thrills, fun and durability this legendary mini basher can offer and find out why it set the bar really high for all these years to become one of the most sought-after mini R/C cars! CHARGER NOTE: Power adapter and cable sold separately. For maximum charging rate, please use the Traxxas Power Adapter and Traxxas Charging Cable (TRA2912 & TRA2916 - both sold separately). Features: Fully Assembled and ready-to-run Waterproof powerful brushed electronics External gear cover with easy slipper access Rocker-actuated suspension and threaded oil-filled GTR shocks Full-time 4WD Ball-Bearing transmission With Torque-Control slipper clutch Sealed silicone-filled differentials Equipped with a 2-amp USB-C fast charger! Dual battery compartments with quick-release doors Up to 20+mph with included NiMH battery Specifications: Scale: 1/16 Length: 12.9" (328mm) Width: 9.4" (239mm) Height: 4.6" (117mm) Wheelbase: 7.9" (202mm) Weight: 44oz (1.24kg) Power Source: Electric Input Voltage: 6-cells (7.2V) NiMH 2S (7.4V) LiPo Drive: Shaft-driven 4WD Gear Pitch: 48P Gear Ratio: 5.04:1, (Final drive: 9.72:1) Assembly: Ready-To-Run Includes: (1) Traxxas E-Revo 1/16 RTR 4WD Monster Truck (1) 2-Amp USB-C Fast Charger (1) NiMH Battery with Traxxas ID (1) User Manual Needed to Complete: (4) (AA) for Transmitter This product was added to our catalog September 27, 2023

Read more less

71076-8, Traxxas E-Revo VXL Brushless 1/16 4WD RTR Monster Truck (Blue) w/VXL-3m ESC, TQi 2.4GHz Radio, Battery & USB-C Charger Traxxas E-Revo VXL Brushless 1/16 4WD RTR Monster Truck. Don’t let the smaller size fool you, this little brushless monster packs a huge punch. Packed under the factory-finished polycarbonate shell, you’ll find the same suspension technology found in the renowned Traxxas Revo, Velineon brushless power, and all-weather-ready electronics. Only Traxxas can give you the speed, quality, and performance you crave in a convenient 1/16 scale all-out offroad excitement, anytime, anywhere! This 1/16 E-Revo VXL takes all the track-proven innovation of the full-size E-Revo VXL and scales it down to a convenient go-anywhere size. E-Revo's rocker-actuated suspension has been expertly adapted to 1/16 scale with its oil-filled, threaded-body GTR shocks. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. E-Revo's monocoque chassis balances strength and weight to far surpass the standards of the "mini" category. Specifically designed for Traxxas 1/16 scale models, the VXL-3m speed control and Velineon 380 motor represent the latest in brushless technology. Fully LiPo compatible with low-voltage detection for 2S and 3S packs and rated for 6-12 NiMH cells, this potent, powerful combo gives E-Revo VXL precise throttle control and blistering top speed. The Velineon 380 is built with high-speed ball bearings, sintered rotor, neodymium magnets, and gold-plated 3.5 mm connectors. It all adds up to 50,000 rpm of pure power and speed! Get the 1/16 E-Revo VXL to get a taste of all the thrills, fun and durability this legendary mini basher can offer and find out why it set the bar really high for all these years to become one of the most sought-after mini R/C cars! CHARGER NOTE: Power adapter and cable sold separately. For maximum charging rate, please use the Traxxas Power Adapter and Traxxas Charging Cable (TRA2912 & TRA2916 - both sold separately). Features: Fully Assembled and ready-to-run out of the box with included battery and charger! Waterproof Velineon 380 brushless electronics Traxxas Stability Management (TSM) Rocker-actuated suspension and threaded oil-filled GTR shocks Full-time 4WD Ball-Bearing transmission With Torque-Control slipper clutch Sealed silicone-filled differentials Equipped with a 2-amp USB-C fast charger! Dual battery compartments with quick-release doors Up to 30+mph with included NiMH battery and 50+ mph with an additional NiMH battery (Sold-Separately) Specifications: Scale: 1/16 Length: 12.9" (328mm) Width: 9.4" (239mm) Height: 4.6" (117mm) Wheelbase: 7.9" (202mm) Weight: 38oz (1.09kg) Power Source: Electric Input Voltage: 6-12 cells (7.2V-14.4V) NiMH 2-3S (7.4V-11.1V) LiPo Drive: Shaft-driven 4WD Gear Pitch: 48P Gear Ratio: 5.04:1, (Final drive: 9.72:1) Assembly Level: Ready-To-Run Includes: (1) E-Revo VXL Brushless 1/16 4WD RTR Monster Truck (1) 2-Amp USB-C Fast Charger (1) NiMH Battery with Traxxas ID Connector Needed to Complete: (4) (AA) for Transmitter This product was added to our catalog on September 27, 2023

Read more less

72054-5, Traxxas Summit 1/16 4WD RTR Monster Truck w/TQ 2.4GHz, Battery, Charger & LEDs The Traxxas 1/16 Summit is now available in a Rock n' Roll paint scheme! Combine that with Titan 12T power and you have power to match the attitude for go-anywhere off-road fun. Featuring factory-installed bright LED lights in the front and rear bumpers in addition to the roof mounted LED light bar in the Exo-Cage, the 1/16 Summit is ready to light up the night. Enjoy Big Summit Fun in a More Convenient 1/16 Scale Size! Leave it to Traxxas to stuff a 1/10 scale motor into a 1/16 scale truck! Summit’s mighty Titan 12T 550 motor delivers nearly limitless torque for tire-scorching acceleration and all-terrain capability. With massive suspension travel and 4-wheel drive traction, Summit tackles impossible terrain. Traxxas engineers combined all the big Summit's go-anywhere versatility with waterproof electronics to make even your wildest adventures possible. Summit’s bright LED lights blaze a trail, making night runs more exciting than ever. The 1/16 Summit's just-right size lets you enjoy hours of off-road fun anytime, anywhere!Features: 6-cell NiMH Power Cell Battery with iD Ready-To-Race® with Included Power Cell™ NiMH Battery and AC Wall-Outlet Charger Powerful Titan® 12T 550 Motor—Largest in Class Waterproof XL-2.5 Electronic Speed Control TQ™ 2.4GHz Transmitter and Receiver Full-Time 4WD Bright LED Lights Front and Rear to Illuminate the Trail Waterproof Electronics for all-Weather Adventures Torque-Control™ Adjustable Slipper Clutch Sealed Differentials Realistic all-Terrain Tires with Foam Inserts Specifications: Length: 12.6" (320mm) Front Track: 10.43" (265mm) Rear Track: 10.63" (270mm) Weight: 46.4oz (1.31kg) Height (Overall): 7.48" (190mm) Wheelbase: 8.425" (214mm) Wheel Diameter: 2.2" (56mm) Shock Length (Front / Rear): 48mm / 48mm Front/Rear Tires (Glued): Canyon AT Front/Rear Wheels: Geode™ Electronic Speed Control: Waterproof XL-2.5 ESC Motor (Electric): Titan® 12T 550 Transmission: Heavy-Duty Single Speed Gear Ratio (Internal): 5.04:1, (Reversed Input: 9.72:1) Overall Drive Ratio: 15.75:1 (stock) Differential Type: Hardened Steel Bevel, Sealed Gear Pitch: 48-Pitch Chassis Structure/Material: Molded Composite Nylon Monocoque Brake Type: Electronic Drive System: Shaft-Driven 4WD Steering: Bellcrank Radio System: Traxxas TQ™ 2.4GHz (2-Channel) Included Charger: AC Wall-Outlet Charger Included Batteries: 6-cell NiMH with iD Connector Needed to Complete: 4 "AA" Batteries for Transmitter This product was added to our catalog or updated on November 27, 2023

Read more less

BlackZon Slyder Monster Truck (MT) Turbo 1/16 4WD RTR 2S Brushless 4WD Shaft Driven Truck Independent Double Wishbone Suspension Adjustable Coilover Shocks 4-Gear Differentials Front & Rear Metal Rear Drive Shafts Gear Cover To Keep Debris Away From The Spur Gear Dual Point Bell Crank Steering System Servo Saver Built into Servo Horn Complete Set of Ball Bearings Splashproof Electronics 3800KV Brushless Motor 2.4GHz Radio with 2 in 1 Brushless ESC/Receiver - 2S Capable 2S 7.4V 1000mAh LiPo Battery w/ T-Plug connector USB Charger Speed Limiter using Speed Dial on Transmitter Front LED Lights included in box (customer to fit if desired) Wheelie Bar included in box (customer to fit if desired) Notes: 2S Capable Different model to Brushed car - Increased Range and Steering D/R Features: ESC: 2in1 Brushless ESC Motor: 3800KV Brushless Motor Servo: 3 Wire Radio: 2.4GHz 2 Channel Battery: 2S 7.4V LiPo - 1000mAh 25C Charger: USB Specifications: Length (mm): 270 Width (mm): 215 Height (mm): 130 Wheelbase (mm): 175 This product was added to our catalog on November 11, 2023

Read more less

BlackZon Slyder Short Course Truck (ST) Turbo 1/16 4WD RTR 2S Brushless 4WD Shaft Driven Truck Independent Double Wishbone Suspension Adjustable Coilover Shocks 4-Gear Differentials Front & Rear Metal Rear Drive Shafts Gear Cover To Keep Debris Away From The Spur Gear Dual Point Bell Crank Steering System Servo Saver Built into Servo Horn Complete Set of Ball Bearings Splashproof Electronics 3800KV Brushless Motor 2.4GHz Radio with 2 in 1 Brushless ESC/Receiver - 2S Capable 2S 7.4V 1000mAh LiPo Battery w/ T-Plug connector USB Charger Speed Limiter using Speed Dial on Transmitter Front LED Lights included in box (customer to fit if desired) Wheelie Bar included in box (customer to fit if desired) Notes: 2S Capable Different model to Brushed car - Increased Range and Steering D/R Features: ESC: 2in1 Brushless ESC Motor: 3800KV Brushless Motor Servo: 3 Wire Radio: 2.4GHz 2 Channel Battery: 2S 7.4V LiPo - 1000mAh 25C Charger: USB Specifications: Length (mm): 270 Width (mm): 215 Height (mm): 130 Wheelbase (mm): 175 This product was added to our catalog on November 11, 2023

Read more less

HWA81030010, Hobbywing EZRun 18A Sensorless Brushless ESC/Motor Combo (18.0T/5200kV) w/Program Box This is the Hobbywing EZRun 18A Sensorless Brushless ESC and Motor Combo, with an included Program Box. This combo combines an 18 Amp Brushless/Sensorless ESC with a 18.0 Turn, 5200kV Brushless/Sensorless Motor for an electronic package suitable for 1/18 and 1/16 scale on-road and off-road sport fun.  Features: Compatible with sensorless brushless motors. High quality components, big current endurance. Excellent start-up, acceleration and linearity features. Plenty of programmable items, suitable for various of chassis's, tires and racing tracks. Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection. Internal timing can be changed easily to make the ESC suitable for various of motors. Easily programmed with the SET button, LED Program Box, Multifunction LCD Program Box and USB Link Software. ESC firmware can be updated through the USB adapter in the LCD Program Box. Top quality motor: Aluminum shell (case) High quality magnets Copper wires of high temperature endurance Good quality bearings ESC Specifications: Output: Continuous 18A, burst 50A. Input: 4-9 cells NiMH/NiCd or 2-3S LiPo. BEC: 6V/1A (Linear mode built-in BEC). Resistance: 0.01 Ohm. Motor Supported: Sensorless Brushless Motor. Suitable Car: 1/18 on-road sport. Cooling Fan: Not included. Size: 31.5mm(L) * 27.5mm(W) * 15mm(H). Weight: 19g (Without wires) Motor Specifications: kV: 5200 Motor Diameter: 20mm Motor Length: 30 Shaft Diameter: 2mm Shaft Length: 10mm Weight: 46g Programmer Specifications: Size: 88x58x14mm Weight: 40g Input Weight: 4.8-6V Includes: EZRun 18A Brushless/Sensorless ESC EZRun 2030 18.0T/5200kV Brushless/Sensorless Motor LED Program Box  Note: The battery lead coming off the ESC uses a Mini Tamiya male plug. You will either need a battery with a Mini Tamiya female plug, or solder on new connectors. This product was added to our catalog on May 4, 2023

Read more less

LOS01020, Losi JRX2 1/16 RTR 2WD Buggy w/2.4GHz Radio, Battery & Charger The Losi JRX2 1/16 RTR 2WD Buggy is a scaled down version of first Losi race vehicle produced. The original JRX2 was developed over three years and featured a graphite chassis, rear motor design and 5-link suspension. Losi has faithfully scaled down this iconic buggy into 1/16 scale and allows you to experience old school style, handling and performance. The Losi Mini JRX2 Buggy honors its roots by creating a mini buggy with a classic look and 21st-century performance. With a 5-link rear suspension providing maximum grip in loose conditions, aluminum shocks, and era-specific ribbed front tires, and 4 row step pin rear tires, you get more from a Mini than ever before. It features a rear motor configuration like the original and three different trim schemes that mimic the original box art schemes of the era, all in a total ready-to-run package. Everything about this buggy is designed to deliver a jaw-dropping experience. Features: Scaled-down JRX2 Rear motor configuration 5 link rear suspension 650mAh LiPo Battery and .5A USB Charger SLT 2.4Ghz Transmitter 2-in-1 ESC/RX Rib fronts and 4 row step pin rear tires Fiberglass Chassis Full ball bearings Aluminum shocks Retro Trim Schemes Specifications: Scale: 1/16 Length: 10" (254 mm) Width: 7.2" (183 mm) Wheelbase: 7.13" (181 mm) Height: 4.25" (108 mm) Weight: 18.6oz (526g) Power Type: Electric Motor Type: Brushed Drivetrain: 2WD Suspension: Independent, 5-Link Gear Pitch: .5 MOD Pinion: 17T Motor Size: 42 Turn, 280 size Completion Level: Ready-To-Run Includes: (1) Losi Mini JRX2 Buggy (1) 650mAh LiPo Battery (1) .5A USB Charger (1) SLT2 2.4Ghz Transmitter (4) AA Batteries (1) User Manual Needed to Complete: Nothing! Everything you need is in the box! This product was added to our catalog on June 13, 2022

Read more less

Losi 2WD Mini No Prep Drag Car with 1970 Chevelle Body! The Losi 1/16 1970 Chevelle 2WD RTR Mini No Prep Drag Car is built on the ever-popular Losi Mini-T and Mini-B chassis. This mini "No Prep" car is designed to give RC enthusiasts an easy way to enjoy the thrills of RC drag racing. While this car comes with a scale 1970 Chevelle body, the chassis features an adjustable wheelbase to allow you to use other optional mini on-road bodies. One of the most critical parts of "No Prep" RC is suspension tuning. This Mini chassis features a fully adjustable suspension system to fine-tune the launch and stability on the "big end". The transmission is based on the TLR (Team Losi Racing) 3-gear mid-motor transmission and features a full metal gear setup. An adjustable slipper clutch allows you to refine the power delivery. When it comes to power, this car has been given the Spektrum Firma 6000kV 2-in-1 brushless power system. In a 1/16 scale pass, the car only has to travel 82.5 feet. The integrated ESC on the back of the motor can be tuned to help you make a full pull. Features: Officially licensed 1970 Chevy Chevelle body with molded details and LED head and tail lights Factory-installed 6000Kv 2-in-1 brushless power system Built on the Mini 22 platform and based on the Losi Mini-T and Mini-B Multi-wheelbase chassis accommodates other on-road mini bodies Officially licensed Mickey Thompson front and rear tires with realistic looks and performance Specifications Scale: 1/16 Length: 17.75" (451 mm) Width: 6.5" (165 mm) Height: 4" (102 mm) Wheelbase: 9.4" (239 mm) Ground Clearance: 0.5 in (12.5mm) Weight: 1.5 lb (0.7kg) Drivetrain: 2WD Pinion: 17T Spur Gear: 60T Gear Pitch: 0.5 MOD Power Type: Electric Motor Type: Brushless Connector Type: EC2 Completion Level: Ready-To-Run Includes: (1) 1/16 Losi 1970 Chevelle 2WD Mini Drag Car (3) Optional Rear Toe-blocks (1) 7.4V 800mAh 2S 50C LiPo Hard Case w/ EC2 Connector (1) USB Charger (1) Spektrum SLT2 2-Channel 2.4GHz Transmitter (4) AA Transmitter Batteries (1) Product Manual Tools Needed to Complete: Nothing! Everything you need is included in the box! This product was added to our catalog on January 25, 2023

Read more less

TRA7184, Traxxas 1/16 E-Revo Wheelie Bar This is the optional Traxxas 1/16 E-Revo Wheelie Bar. How do you like your wheelies? Whether you like to ride with the front wheels held high for show-stopping stunt maneuvers or prefer to keep ‘em low for locked-in launches, Traxxas’ new adjustable wheelie bar for the 1/16 E-Revo puts you in control. The wheelie bar’s unique, patented design is easy to install for controlled wheelies on demand. Four snap-in adjustment positions allow you to choose how extreme you want your wheelie action to be. When it’s time to head off road, the wheelie bar can be easily removed with just two screws. Features: Factory Assembled Installs easily in minutes Rugged construction, patented design Four snap-in positions for variable wheelie angles Easily removed for off-road running Replaceable wheels Includes installation hardware and instructions This product was added to our catalog on May 12, 2021

Read more less